This thread is a supplement to the HardSPL thread, in the unfortunate case that you need to return your phone to Stock specifications (including Stock SPL), and the SPL that came with your phone didn't happen to be the 1.90 version included in the HardSPL thread. I've included the few that I have here, and as I come across others, I'll add them to this post. If anyone else has other versions, feel free to post them here as well.
Each zip file includes the Stock SPL nbh file ONLY. In order to restore Stock SPL, you WILL need the HardSPL package from this thread.
SPL 1.95 - Extracted from AT&T HTC FUZE Stock ROM
SPL 5.05 - Extracted from Official HTC ROM (WWE)
SPL 5.08 - Extracted from AT&T HTC FUZE Test ROM
SPL 5.07 - Extracted from Official HTC ROM - Southeast Asia - Sintel-English
SPL 1.90 (from HardSPL thread) - I added this one just so they're all in the same place.
EDIT: I have tired flashing several of these to my device with no success. It appears there is more that I need to do to extract these SPLs properly. In the meantime, I recommend that you use the 1.90SPL from the HardSPL thread for your warranty purposes. If you would then like to get the stock SPL on your device, re-flashing the stock ROM should accomplish that.
Thanks
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
assassin82492 said:
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
Click to expand...
Click to collapse
Before we do that, let's stop there. If you want to flash Da_G's WM6.5 ROM, you need to have HardSPL on your device. You should only be flashing a stock SPL if you are returning your phone, for warranty reasons. Can you clarify what it is you're trying to do?
Also, have you reviewed this thread, so you know how to flash your phone properly?
Thanks for compiling this. Sticky time!
Captain_Throwback said:
Before we do that, let's stop there. If you want to flash Da_G's WM6.5 ROM, you need to have HardSPL on your device. You should only be flashing a stock SPL if you are returning your phone, for warranty reasons. Can you clarify what it is you're trying to do?
Also, have you reviewed this thread, so you know how to flash your phone properly?
Click to expand...
Click to collapse
Yea I have looked at that and I know about having the hard spl. I just don't know how to flash the 6.5 rom. Thanks for your concern though.
StockSPL 1.69
Here is Stock SPL 1.69 from T-Mobile Czech ROM extracted from RUU_signed.nbh with NBHextract.exe a converted with yang back to nbh by following code
Code:
yang -F SPL.nbh -f SPL.nb -t 0x200 -s 64 -d RAPH***** -c 11111111 -v 1.00.000 -l WWE
Some Moderator can move it to first post ;-)
I have HardSPL and it says version 1.90Olinex. I think my stock was SPL 1.95 but i'm not sure. I have the ATT Fuze. I'm having a problem with the G-Sensor and need to send it back for replacement. Can anyone confirm that I need to flash 1.95 for ATT or anything else? Also If I have upgraded the radio, should I downgraded it before send back for replacement or its ok?
Thanks
chukalov said:
I have HardSPL and it says version 1.90Olinex. I think my stock was SPL 1.95 but i'm not sure. I have the ATT Fuze. I'm having a problem with the G-Sensor and need to send it back for replacement. Can anyone confirm that I need to flash 1.95 for ATT or anything else? Also If I have upgraded the radio, should I downgraded it before send back for replacement or its ok?
Thanks
Click to expand...
Click to collapse
When you flash the stock Fuze ROM, your radio will also be flashed. Be sure to follow the instructions in the Hard-SPL thread for returning your phone to stock specifications. When you get to the part about flashing back to Stock SPL for warranty purposes, the 1.95 SPL from the OP here is the one you should use (if you purchased your Fuze in the US after it was officially released - that's what mine came with).
Well, lucky me . I kept shaking the phone and my G-sensor works now. It was stuck on one side and would move. I think I will hold off with the return to stock for now, i really dont want to get refurb replacement.
Thanks for the reply.
assassin82492 said:
Thank you so much. I have been looking for the 1.95 spl for weeks. In fact that was the only thing stopping me from flashing Da G's Windows mobile 6.5 ROM. Also could you send me a Pm with Instructions on how to flash the wm6.5 rom and the 1.95 spl.
Thanks.
Click to expand...
Click to collapse
Please... for your own sake and ours... please read. This has been covered many, many times... I don't want you to end up with a bricked device, and quite frankly, I don't believe this question needs to be answered yet again. Please read, I am not trying to be rude, but if you read, you won't have to ask this question.
Hey Captain,
I'm not sure if I'm doing something wrong, but for some reason the 1.95 SPL file doesn't work. The SPL remains as HardSPL. However, the Stock 1.90 SPL file provided by Onlinex does work. Any advice?
Thanks!
custommsp said:
Hey Captain,
I'm not sure if I'm doing something wrong, but for some reason the 1.95 SPL file doesn't work. The SPL remains as HardSPL. However, the Stock 1.90 SPL file provided by Onlinex does work. Any advice?
Thanks!
Click to expand...
Click to collapse
I'm sure you didn't do anything wrong. I'll look into it. In the meantime, if you just re-flash the Stock ROM after flashing the 1.90 SPL, it should upgrade your SPL to 1.95 (since that's what's included with the Stock ROM). I'll try and figure out what I did wrong.
Great, I'll try it.
ryan_h said:
Please... for your own sake and ours... please read. This has been covered many, many times... I don't want you to end up with a bricked device, and quite frankly, I don't believe this question needs to be answered yet again. Please read, I am not trying to be rude, but if you read, you won't have to ask this question.
Click to expand...
Click to collapse
I couldn't find it. I asked the Captain because he already had the ROm installed and he helped a lot.
SPL extract attempts unsuccessful
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Captain_Throwback said:
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Click to expand...
Click to collapse
As you already suggested, it's probably best to flash back to the stock 1.90 SPL following Onlinex's guide after which one should just install the stock ATT Rom or the other stock roms with the latest stock SPL. This worked for me.
Thanks!
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
Captain_Throwback said:
I have tried to flash almost all of the stock SPLs I extracted, but I can't get any of them to flash using the HardSPL wrapper. I'm not sure that any of them will work. I've updated the first post with the only method that will probably work to restore stock SPL (unless someone can figure out what I'm doing wrong. I've tried htcRIE, NBHExtract, NBHUtil, & yang, and while all of the SPLs I extracted appear to have been done successfully, when I try to flash them to my phone, none of them are working. I'm getting a connection error with the wrapper. Maybe its not the SPL, but an issue with my phone, I don't know.
At any rate, I believe this thread will probably not serve the purpose for which it was intended, and should perhaps be archived & closed.
My first attempt at helping out appears to have been unsuccessful .
Click to expand...
Click to collapse
So as far as i understand, it is possible to flash 1.90 SPL to my device although it had 1.69 SPL as a default by T-Mobile!?
To your problem: shouldnt you just restore your stock Radio and stock OS before flashing stock SPL ?
arvin2212 said:
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
Click to expand...
Click to collapse
First of all, if you need to restore your phone back to stock, as tvaril noted, you MUST first flash your stock ROM/radio. Once you do that, then you should flash the stock SPL (1.90) provided in the HardSPL thread using the method indicated there.Then, re-flash your stock ROM, and it should restore your stock SPL.
tvaril said:
So as far as i understand, it is possible to flash 1.90 SPL to my device although it had 1.69 SPL as a default by T-Mobile!?
Click to expand...
Click to collapse
Yes, you should be able to flash the stock SPL 1.90 provided in the HardSPL thread, using the method indicated there, and then re-flash your stock ROM, and it should restore your 1.69 SPL.
Captain_Throwback said:
First of all, if you need to restore your phone back to stock, as tvaril noted, you MUST first flash your stock ROM/radio. Once you do that, then you should flash the stock SPL (1.90) provided in the HardSPL thread using the method indicated there.Then, re-flash your stock ROM, and it should restore your stock SPL.
Click to expand...
Click to collapse
i believe you misunderstood his question. he's asking which SPL should he download given that he got his phone in malaysia
i believe that it should be the asia-singtel one. i'm in singapore, and that is the rom that was recently released for our devices. so my guess would be the singtel spl.
Related
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click on the mrvanx guide at the bottom of my signature, it will tell you how to downgrade in the guides.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have been there mrvanx guide. but he don't have the solution to this problem. Just to downgrade the rom to wm5 not the SPL.
mysharif i think we have to shout again.
Help us anybody there we are stuck here.
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
You are great. I hope it will work for my Imate JasJam. Last night I was flashing my ROM with the original ROM but modified with NBH decomplie too by dutty. Before that I wrecked my device as I used the flashing of ROM using the latest sensation of loading the SSPL to RAM by des. That was my mistake that I used the original ROM. Then I removed the USB cable as it was taking too much time and because of danger to my imate I did that. Anyhow I got the NO GSM error but then I ran the Dutty's WM6v2 cooked ROM and it fixes all the things I am using it now.
The reason for my Imate JasJam degrade is my jog is not working according to its function. You know jumping from field to field. I didn't found any of that problem solution till the page of 30 in threads and posts. I am searching but if anybody knows the link. Kindly help me. So that I will save a trip to see the warranty people. (here we don't have ladies receptionists )
Sorry for the stupid question, how do I downgrade from Oli 2.10 to Oli 1.10
Il write a guide on it...too many PMs about this.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
aquasesh said:
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
Click to expand...
Click to collapse
Ofcourse...because flashing an original RUU it doesnt recognise the new bootloader (Hence your 260 error), and HArdSPL doesnt allow itself to be overwritten by a retail RUU. IF you read through the HArdSPL threads you would know this.
mrvanx said:
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
Click to expand...
Click to collapse
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
GreatGrey said:
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
Click to expand...
Click to collapse
Just flash SPL 1.10.oli.......................then flash a vodaphone ROM, dont use 'force SSPL', just use autodetect.
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Pawel062 said:
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Click to expand...
Click to collapse
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
yea your right I just wanted to reduce your work load.
mrvanx said:
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
Click to expand...
Click to collapse
Hi mrvanx, some input to go into your guide (in case you havent come across this yet).
While flashing 1.10Oli under Vista, users may run into a problem where after loading SSPL and the phone goes into (SSPL) bootloader mode, the RUU program cannot detect the phone and returns an error.
This is due to the Vista drivers for HTC USB Sync. The driver needs to be manually "updated" just like in your Vista flashing guide. In this case, while the phone is in SSPL bootloader mode, go into device manager, replace the default HTC USB Sync driver with the USBAS one from your Vista flashing guide.
Then soft reset the phone, and try again. Worked for me.
For some reason, SSPL bootloader may appear as a different device to Windows than the hard/standard bootloader, so even if the Vista procedure has been performed before, it looks like it needs to be done also for SSPL.
I have upgraded my 838pro to IPL - 1.04, SPL- 2.10 Olipro , Radio 1.43.00.00, OS is Black Majik .
Is it possible to upgrade from officially released wm06 rom from dopod (when its released), will it work, or give me problems.
I am newbie to upgrades. so i dont know technical things like hardspl etc.
Thanks
Pramod Naidu
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Shamanix said:
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Click to expand...
Click to collapse
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
One more foolish question
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
viewedit said:
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
Click to expand...
Click to collapse
The only benefit of SuperCID is you can read/write to the ext_rom in windows mobile.....so not really a great benefit.
HardSPL reports itself as SuperCID.....but your device is NOT. Essentially your device is virtually SuperCID.
Thanks
Thanks a lot sir.
Pramod Naidu
When I have gone back from a WM6 ROM to the Official (WM5) AT&T ROM I flashed the older (1.04 I wanna say?) version of HardSPL and it works fine and gets overwritten to the 1.11. Then if I go back to WM6 I just reflash HardSPL v7 and it works fine. I'm not sure if that actually does make it official, but I know based on the startup and bootloader screens, after going to the old HardSPL then using the AT&T Updater, everything says 1.11 and looks the same as it did before I started putting cooked ROMs on my phone.
What if its exe file
how do i extract the nbh from exe file.
How to extract nbh from exe
how do i extract nbh from exe to flash it to hardspl, i dont want to downgrade my spl
Use winrar.
Right click on the file and "open with winrar"
Question?
mrvanx said:
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
Click to expand...
Click to collapse
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Trezona said:
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Click to expand...
Click to collapse
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
mrvanx said:
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
Click to expand...
Click to collapse
Great! i understand, thanks!
Regards.
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Da_G said:
Possible image might be corrupt on sd card, grey screen is shown when it's trying to read sd, have you tried with sd removed? if you get to 2nd tricolor screen with sd removed i would use usb flash to restore it to working order..
Click to expand...
Click to collapse
Removed the SD and it stays at the tricolor screen with the spl version as mentioned in 1st post.
Also, displaying the Upgrade ROM code error, please try again message
The mode is currently serial
What can I do from here?
fireblade63 said:
Dear all,
I am facing a problem here.
Had a hardware problem with the built in microphone and had to revert back to stock rom/splash screen/Original SPL in that order.
Had no problems reverting the ROM and the original screen back (just a couple of flashes), BUT when I tried to revert back the stock SPL here http://forum.xda-developers.com/attachment.php?attachmentid=110582&d=1220406410
I renamed the file to RAPHIMG.nbh, copied it to the root of the SD Card and entered bootloader mode and this is what it displays:
RAPH100
SPL-1.90.0000 (Which means a successful flash)
!!! AND THEN THIS !!!
"Upgrade ROM code error"
"Please try again"
This message is located in the last part of the green stripe in the tri color screen (bootloader)
It is then followed by the grey screen automatically which you are supposed to press volume key to start a flash process BUT it just HANGS at Loading...
unabling you to flash anything.
It's actually a friend's phone too so I guess you understand how hard it is....
Any help is appreciated
Thanks in advance
Click to expand...
Click to collapse
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
NotATreoFan said:
You cannot flash an SPL from the bootloader. You need to use SSPL. The directions can be found in the HardSPL thread.
Click to expand...
Click to collapse
Hey man, thx for stopping by..
If I understand correctly, SSPL runs through the device which is stuck at bootloader currently... or am I hopefully wrong??
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Da_G said:
If you're at the tricolor screen and it reads serial, that should be fine.. plug in usb and it should switch to usb.. then flash a stock carrier rom through usb.. that should get you up and running and you can then run sspl and flash your spl
Click to expand...
Click to collapse
Keep in mind im currently on stock SPL, do u think flashing the stock ROM is ok?
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
dude....i hate to say this...butyou might be s.o.l. at this point. i did the same to my fuze not too long ago... tryingto flash anything to the phone just locks it up.i was lucky enough to bs my way through an att guy to get me a new one (was still under the 30 day warranty).
Da_G said:
That's exactly why i suggested stock ROM, stock SPL will only accept stock ROM's (it will overwrite the spl too so make sure the stock rom you are using is the right one)
Click to expand...
Click to collapse
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
I had the same problem as you and could not flash any rom, Always get Invalid vendor ID.
You need the right Stock Rom to flash and in my case in the middleeast, the Stock Rom is so far only available in at HTC.
I had to take the phone to HTC Service Center and they flashed the correct Stock Rom and charged me as they did it out of warranty.
Regards
fireblade63 said:
That's wt Im trying now, tried to flash 2 ROMs already and stops at 2% saying Invalid Vendor ID
I gess I'm using wrong shipped roms till now
Click to expand...
Click to collapse
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
fireblade63 said:
Hmm, then I need to know from which ROM the SPL originated and then flash it.
Thing is, some of the shipped roms available at wiki are just nbh files..
I tried flashing with the wrapper exe and the RaphaelCustomRUU.exe and still all roms I've downloaded don't seem to work.
It's a RAPH100 untied to a network.
Click to expand...
Click to collapse
Post in the HardSPL thread asking which ROM the SPL originated from. Once you know that, you can download the appropriate ROM from the Wiki.
NotATreoFan said:
Sorry about my last post... I misread your issue.
If you flashed the stock 1.90 SPL from the HardSPL thread, then you will need to ask Olipro (or cmonex) which WWE ROM it originated from. That ROM is the ONLY one your phone will accept.
The steps in reverting SPL for warranty / return state to always do the ROM first so that you do not run into this problem. I had the same issue when I was testing a US 3G Diamond I bought from Best Buy (to become acclimated to TF3D prior to the Fuze's release). I restored the SPL first, and then couldn't get Dutty's ROM off the phone, because I could not locate a downloadable version of the WWE ROM that phone came with. [Luckily, Best Buy Mobile's employees in KOP, PA aren't too clever, and I was able to convince them that the phone came that way. ]
Click to expand...
Click to collapse
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
shafez said:
SPL has nothing to do with the Invalid Vendor ID Error, It is the CID. In another word you can flash SPL 1.95 and still can not flash the AT Rom 1.95.502.5 because the CID is different.
Regards
Click to expand...
Click to collapse
The CID is determind by the SPL.
Look up the error code posted... everything points to HardSPL. Back in my Wizard days, HardSPL did not exist, and we just did a CID unlocking. This is not the case with newer devices.
All ROMs are not created equal. Each WWE ROM checks for specific information within the SPL, and if it doesn't find what it's expecting, fail...
stepw said:
ViperBJK's QMAT features GoldCard generator for current HTC devices that can force RUU to bypass CID check.
Do you know what is the CID of your device?
Click to expand...
Click to collapse
I'm not sure
Where can I know that?
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
fireblade63 said:
@NotATreoFan && Shafez,
I remember from TyTNII day when Shafez suggested extracting 3.29 and 28 SPLs from the newer shipped 6.1's for a better responsive device.
We could extract and build with htc rom tool if I remember the name of the tool correctly.
Do we have a tool as such compatible with TP? (agreeing with NotATreoFan here)
@Shafez,
Since you think it is not SPL and it is a CID issue, what can I do about it?
Sending it to SVC for repair out of warranty is an option but I'd like to leave it as my last.
Did they provide the ROM or they flashed it for you?
Were u able to make raw files out of it for future use or any1 else has it?
Thx guys and keep the help coming
Click to expand...
Click to collapse
Since you cannot get past the bootloader, your only option is to find the WWE ROM that matches the SPL you flashed. Even though the HTC ROM Tool "signs" the NBH file, it still won't fool the stock bootloader... if it did, we wouldn't need HardSPL.
Anyone please confirm I am thinking right?
Here’s what I did:
1.From T-mobile.cz I got the factory Czech T-Mobile Rom (*.exe)
2. I extracted the *.exe with WinRar and got a bunch of files.
3. I took out RUU_Signed and extracted it with NBHtool and got 4 *.NB files:
769.nb
PrimarySplash.nb
SPL.nb
Windows.nb
4. In the meanwhile I extracted my original reconstructed Dutch T-Mobile RUU_Signed.nbh (confirmed working) and took the Windows.nb
5. From the Czech *.nb files I deleted the windows.nb and replaced it with my Dutch windows.nb
6. With htcRIE 0.5.0.12 I put the three Czech NB’s:769.nb (suppose radio), PrimarySplash.nb and SPL.nb together with The Dutch windows.nb together in New RUU_signed.nbh.
7. I put the newly created RUU_Signed back into the folder with files from step 2.
8. Using Winrar I stuffed ala these files together in an *.sfx file that has an instruction saying that after extracting the sfx it should start RomUpdateUtility.
9. So far so good! I clicked the sfx and it would nicely extract and start the Czech RomUpdateUtility. The utility being Czech is no problem as I/we have been using it probably a sillion times and don’t read it.
10. Now I don’t have the guts to test it on my Dutch MDA Vario IV JJ but want to know wether this would work in case of RMA.
I remember that the Dutch factory ROM-upgrade for T-Mobile Vario III (Kaiser) would restore everything: SPL, Splash etc) By doing the above I somehow think I have re-created sort of a Dutch “factory” ROM upgrade that will restore everything back to stock.
Suppose this works, will I be able to go back to Hard SPL a second time? (heard some rumors...)
I want you guys to know that I don’t have any education in ICT but consider myself smart enough to figure things like this out . However… I am not too sure about what I have created.
Thnx. For any kind of feedback.
Am willing to upload this for people who want to try.
Free Rapidshare (10 downloads) if needed I will put it in my FTP.
Was it not in The raphael original shipped ROM wiki?
Also if it would help, I think I still have the files backed up at home somewhere. If you want I could look for it.
haaibaa2 said:
Was it not in The raphael original shipped ROM wiki?
Click to expand...
Click to collapse
It was but when reading the thread that goes with it I get serious doubts about that one working well
I have them backed up as well but I never dumped the splash, radio and more important the SPL. and everyone is talking about SPL's lately but no one can answer me wether one of the offered solutions is a working one.
So I was thinking to sort of creating a oneclick solution for whenever a RMA occures to me again
Was this a dumb question?
Dust2Dust said:
Was this a dumb question?
Click to expand...
Click to collapse
If you were able to download a factory ROM directly from your Carrier's website, then it would include everything you need to return your device to stock.
Then, all you would have to do is follow the instructions in the Hard-SPL thread to install the stock SPL (if you've flashed Hard-SPL), and then re-flash the factory ROM you downloaded to restore the original SPL.
Captain_Throwback said:
If you were able to download a factory ROM directly from your Carrier's website, then it would include everything you need to return your device to stock.
Then, all you would have to do is follow the instructions in the Hard-SPL thread to install the stock SPL (if you've flashed Hard-SPL), and then re-flash the factory ROM you downloaded to restore the original SPL.
Click to expand...
Click to collapse
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Dust2Dust said:
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Click to expand...
Click to collapse
I don't know of any "safe" way, no. I have no confidence that the Stock SPL from the stock SPL thread will work, either - that's why I had that thread closed. After you flash the stock SPL from the Hard-SPL thread, you risk bricking your phone if you try flashing a created ROM to it (even if it is created from parts of stock ROMs).
If you have a stock SPL on the phone, its possible that the extracted SPLs from that thread will actually work; but I'm already on my second phone, so I'm not willing to risk trying it.
Captain_Throwback said:
If you have a stock SPL on the phone, its possible that the extracted SPLs from that thread will actually work; but I'm already on my second phone, so I'm not willing to risk trying it.
Click to expand...
Click to collapse
That's my issue since tuesday I am dealing with my second raph as well the other one was only a couple of weeks old. The mobo burned and they were not able yet to recover anything. But I have set my goals on a working recoverymethod.
Too bad you had your thread closed as it was going somewhere good. and people not reading or trying unconfirmed things take their own risks as this is a development area.
Would you reconsider asking NATF to reopen it and change the topicname?
Dust2Dust said:
That's my issue since tuesday I am dealing with my second raph as well the other one was only a couple of weeks old. The mobo burned and they were not able yet to recover anything. But I have set my goals on a working recoverymethod.
Too bad you had your thread closed as it was going somewhere good. and people not reading or trying unconfirmed things take their own risks as this is a development area.
Would you reconsider asking NATF to reopen it and change the topicname?
Click to expand...
Click to collapse
Well, I think any future conversation on the whole "flashing back to stock" can be carried on in JZ SmartMort's thread with the instructions on how to do that. He also explains in there why none of the SPLs that I extracted will ever overwrite Hard-SPL. Unless Olipro or cmonex enlighten us on how they were able to modify that 1.90 SPL to overwrite the Hard-SPL, that's the only one that'll ever work.
I did see you posted in that thread, but I think if you really NEED a different SPL than one that's in an existing stock ROM, that if you PM Olipro or cmonex, one of them may be able to help you.
Dust2Dust said:
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Click to expand...
Click to collapse
http://www.t-mobile.nl/persoonlijk/...are-updates/mda/mda-compact-iv-winupdate.aspx ???
I thought this includes a complete WM6.1 package.
gdekeijzer said:
http://www.t-mobile.nl/persoonlijk/...are-updates/mda/mda-compact-iv-winupdate.aspx ???
I thought this includes a complete WM6.1 package.
Click to expand...
Click to collapse
It does but it's for MDA Compact IV, aka Touch Diamond... but still am going to look what's inside
edit: cewl it had the splash I wanted inside.
Had the guts to flash...
...and it works. Exept from SPL...
Next step will be flashing this after OLi en cmonex' only for warranty SPL 1.90..
Just wonder wether I will be able to flash back to Hard SPL after this....
Anuone has an idea??
Dust2Dust said:
...and it works. Exept from SPL...
Next step will be flashing this after OLi en cmonex' only for warranty SPL 1.90..
Just wonder wether I will be able to flash back to Hard SPL after this....
Anuone has an idea??
Click to expand...
Click to collapse
If you're able to successfully flash your Franken-ROM w/stock SPL to your phone after flashing the 1.90 warranty SPL, your phone still works, and you can connect to a computer using Activesync or Mobile Device Center, there's no reason you shouldn't be able to re-flash Hard-SPL onto your device. The key words in that sentence are "if" and "successfully" . . .
Captain_Throwback said:
The key words in that sentence are "if" and "successfully" . . .
Click to expand...
Click to collapse
Yep...
those are the keywords
Due to display flickering issue which is worse and worse from day to day. I decided to restore stock rom for my T-Mobile MDA Vario IV to make a complain.
My device is Security Unlocked, with different Radio and ROM so i would like to know if my steps for reverting is ok. I do not want to make my device bricked!!
I have EXE file with ROM from T-Mobile www which includes all like SPL, RADIO, ROM etc.
So my conclusion what i have read is that i have to:
1) restore stock Radio
2) remove security lock
3) remove Hard-SPL
4) flash stock ROM from EXE file i have already downloaded. It will overwrite 1.90 SPL to 1.69 which was my default and overwrite ROM too.
Can anyone experienced with this stuff tell me if i am right? thank a lot.
With the steps you have listed you will be good to go. Just follow your steps and you are good.
tvaril said:
Due to display flickering issue which is worse and worse from day to day. I decided to restore stock rom for my T-Mobile MDA Vario IV to make a complain.
My device is Security Unlocked, with different Radio and ROM so i would like to know if my steps for reverting is ok. I do not want to make my device bricked!!
I have EXE file with ROM from T-Mobile www which includes all like SPL, RADIO, ROM etc.
So my conclusion what i have read is that i have to:
1) restore stock Radio
2) remove security lock
3) remove Hard-SPL
4) flash stock ROM from EXE file i have already downloaded. It will overwrite 1.90 SPL to 1.69 which was my default and overwrite ROM too.
Can anyone experienced with this stuff tell me if i am right? thank a lot.
Click to expand...
Click to collapse
Noo i think this is wrong. Flash the stock rom first, then the stock radio, and lastly the stock SPL.....
Jdilla said:
Noo i think this is wrong. Flash the stock rom first, then the stock radio, and lastly the stock SPL.....
Click to expand...
Click to collapse
the last thing you flash should be the spl
read this before doing anything
http://forum.xda-developers.com/showthread.php?t=410150
Noo i think this is wrong. Flash the stock rom first, then the stock radio, and lastly the stock SPL.....
Click to expand...
Click to collapse
the last thing you flash should be the spl
read this before doing anything
http://forum.xda-developers.com/showthread.php?t=410150
Click to expand...
Click to collapse
I am not a noob i have read this many times, so i know what is the "official" routine. But this (official) routine was, i think made, for people who had no choice (as me with original exe) and they had to dump their ROM first, and than reconstruct part by part. And because the dumped ROM will never be CID safe, they had this tutorial 1. Radio, 2. OS, 3. SPL and it rally does make sense for me.
But i am lucky, because my operator (T-Mobile) shipped the device with EXE, which contains all the stuff (Radio, SPL, OS, RUU) and it is directly for my CID. So that is why i think my tutorial in the first post will work. And i think it should work though if i only remove Security unlock and Hard-SPL. Because it will overwrite all partitions in device even restored Radio, OS etc.
So am i right ?
your right and to save you step dont worry bout radio removal since its in the stock rom pack like u said just load the 1.90 for warrenty in the hard spl thread and relock your phone as an extra precation(some carriers care some dont) the run the exe and ure golden
ps. PimBackup is your friend (just in case u forgot)
m0nkeyf00t said:
your right and to save you step dont worry bout radio removal since its in the stock rom pack like u said just load the 1.90 for warrenty in the hard spl thread and relock your phone as an extra precation(some carriers care some dont) the run the exe and ure golden
ps. PimBackup is your friend (just in case u forgot)
Click to expand...
Click to collapse
Maybe SPB Backup is my better friend than PIM Backup. But i always use both and Microsoft My Phone too Thanks
tvaril said:
I am not a noob i have read this many times, so i know what is the "official" routine. But this (official) routine was, i think made, for people who had no choice (as me with original exe) and they had to dump their ROM first, and than reconstruct part by part. And because the dumped ROM will never be CID safe, they had this tutorial 1. Radio, 2. OS, 3. SPL and it rally does make sense for me.
But i am lucky, because my operator (T-Mobile) shipped the device with EXE, which contains all the stuff (Radio, SPL, OS, RUU) and it is directly for my CID. So that is why i think my tutorial in the first post will work. And i think it should work though if i only remove Security unlock and Hard-SPL. Because it will overwrite all partitions in device even restored Radio, OS etc.
So am i right ?
Click to expand...
Click to collapse
Dear not a noob,
You asked a question, and you were given the "official" routine. If you knew the "official" routine, and you were going to do it your way anyway, it kinda makes your question unnecessary. I remind you that you are not the only person who reads these forums. In fact more than a hundred have read this thread. Some of these people "noobs" or not may want to know the "official" routine.
I personally don't care what you do or where you put your phone. But if anyone reading this thread follows the official routine they will not have any problems.
I understand why people don't like answering questions in these forums. No good deed etc etc......
Ray
rayrayinfla said:
Dear not a noob,
You asked a question, and you were given the "official" routine. If you knew the "official" routine, and you were going to do it your way anyway, it kinda makes your question unnecessary. I remind you that you are not the only person who reads these forums. In fact more than a hundred have read this thread. Some of these people "noobs" or not may want to know the "official" routine.
I personally don't care what you do or where you put your phone. But if anyone reading this thread follows the official routine they will not have any problems.
I understand why people don't like answering questions in these forums. No good deed etc etc......
Ray
Click to expand...
Click to collapse
Dear Ray,
you did not understand my question. That is all that i can say about it. I know about official routine to restoring stock defaults, but i was asking if my routine could lead me to same result. Because as from what i have learned in this forum this routine should lead me to the same result more easier way because i have RUU with stock ROM direct for my CID.
Your way i have to first extract nbh image from exe. Second i have to extract each nb from nbh. Third i have to make nbh from each nb, radio is not necessary, because it is already here. And for fourth my SPL is 1.69.0000 which is different from SPL contained in the Hard-SPL removing pack and it does not work for me just to replace the SPLs. And until now i did not find out why. Someone few months ago told me that i can use the SPL from Hard-SPL removing pack (1.90.0000 i think) and then overwrite it with my stock ROM package, which will restore my stock SPL and Radio, OS again as well. So official routine works for those who had to dump their ROM to backup their stock ROM, those who were not as lucky as me to have stock ROM with RUU for their CID. This procedure, i personaly think is OK, is not covered here on the forum, and that is why i was aking for blessing from someone more involved in this problmes...is it ok now?
PS: anything i can flash after removing Security Lock and Hard-SPL is my stock ROM and that is what i have. So it should work if there are not some any other things which i have missed somewhere!
Tom
bah dont worry bout them crackheads say i can speak from experience that your way work since thats exactly what i did last week only att exe pack and it did overite the 1.90 stock spl,changed to 1.95 in my case,like u say along with the radio and os. only diferance is i never security unlocked my phone sincei was happy with the raphel radios . now im happy with my new(well refurblished ) fuze.
p.s. i had defective screen too incase you were wondering
Everybody play nice
Ok, that being said, since you have the "official" exe from your Carrier, all you really have to do is:
Run the .exe from your Carrier - this will replace the stock Radio, ROM, and boot splash.
Install the warranty stock SPL 1.90 from the Hard-SPL thread (using the Hard-SPL RUU, of course).
Re-run the .exe from your Carrier, which will overwrite the 1.90 SPL with the stock version.
Other methods will likely work too, but IMHO, that's the easiest .
Captain_Throwback said:
Ok, that being said, since you have the "official" exe from your Carrier, all you really have to do is:
Run the .exe from your Carrier - this will replace the stock Radio, ROM, and boot splash.
Install the warranty stock SPL 1.90 from the Hard-SPL thread (using the Hard-SPL RUU, of course).
Re-run the .exe from your Carrier, which will overwrite the 1.90 SPL with the stock version.
Other methods will likely work too, but IMHO, that's the easiest .
Click to expand...
Click to collapse
Are you sure that running EXE for the first time, before removing Hard-SPL, will not corupt the device ?
tvaril said:
Are you sure that running EXE for the first time, before removing Hard-SPL, will not corupt the device ?
Click to expand...
Click to collapse
Positive. That's actually how I used to "flash to stock" in between custom ROM flashes.