Hi there,
I recently acquired a used t-mobile pocket pc phone edition. Have had it for a week but after ending a call today the device rebooted and it's now in the boot loader. Is there a way to get out of the boot loader? A soft and hard reset rendered no luck unfortunately.
I searched but it doesn't seem to be a common porblem.
Thanks!
-Cap
you could reflash with a sdcard
how to?
how do you reflash it?
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
a lot of thanks
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Click to expand...
Click to collapse
Dear Bro, A lot of thanks for your kind help. I am a new member in your family and can't download your flash file. Please help me again.
amcti
Where is the problem?
Stefan
Related
hi there,
i suceeded getting out of the bricked mode(tri-colour) by mtty, thanks to the active members of this forum. Now what is happening is if i turn off the phone it is going back to the bricked mode, although i will be able to run the mtty and boot it up again. But obviously it is not good to going back to the bricked mode again and again. So, what's next guys? Do i need to flash it? Please give me a link on full instructions how to do that?
Regards
Hi,
Is there any solution for my problem? Any conversation also welcome.
hi
please hepl me my x10 goes in blue screen and always in flash mode.that was in restarting again n again n i by mistake downgrade to R1FA016.FSP_X10a_CLARO_GT_NAM1_1234_4844_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_SPARE.R14A.SIN_FILE_SET firmware....please hepl me guyes!!~
by regards
you should paste this thread into Q&A
cheers.
thanx bro but its amazing i try this firmware again n my handset is alive !!1
Hmmmm........
good news!
perhaps you can deal with problems yourself rather than easily asking for help.......
dude. this isn't a damn symbian phone which kills your phone by downgrading .
edit: yes, I have tonnes of symbian phones
YOU CAN NOT BRICK ANY PRE-2011 SE PHONE WITH ANDROID ON IT BY FLASHING!!
The worst one can do is switching phone off while flashing, that causes the partitions to be filled with trash data.
Learn this and quit spamming the DEVELOPEMENT forum!
dual post... delete please!!
mobilecraker said:
hi
please hepl me my x10 goes in blue screen and always in flash mode.that was in restarting again n again n i by mistake downgrade to R1FA016.FSP_X10a_CLARO_GT_NAM1_1234_4844_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_SPARE.R14A.SIN_FILE_SET firmware....please hepl me guyes!!~
by regards
Click to expand...
Click to collapse
mobilecraker said:
thanx bro but its amazing i try this firmware again n my handset is alive !!1
Click to expand...
Click to collapse
It is my understanding that radio will boot first, followed by other systems. So it is IMPORTANT that your radio image/version will work with your SPL(bootloader) image/version. This is the one and only reason for phones being bricked. You can not brick your phone by flashing a ROM or Boot image or recovery image. Once you flash the wrong radio for the SPL(bootloader), the only known method of recovery is to send the phone back into SE for repair. Now with boot loader unlocked this is quite possible!!
How do I know the phone is bricked? A bricked phone can not boot into boot loader, recovery, or into normal operation modes. You can not connect to a bricked phone via adb or fastboot. You can only see one screen on the phone and it will be the first splash screen.
Greeting all.
As said, I have bricked my one day old phone.
http://www.aliexpress.com/snapshot/230332055.html
I accidentaly flashed it with wrong rom (it was late and didn't read).
Now when i try to flash it, i get this message:https://www.dropbox.com/sc/5cdxl6cdemcbvra/MkG1w84hHd
If anyone has the solution or know how to help me, I would appreciate it.
I wanted to flash it because my sim card didnt catch any signal (thinking that flashing could resolve the problem).
Flashed with this rom (not correct):http://www.needrom.com/mobile/star-x920e-6/
Should flash with this one:http://www.needrom.com/mobile/star-x920e/
Thank everyone in advance.
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
http://www.needrom.com/wp-content/up...ROOT_V0401.zip
2. Download now this ROM:
http://www.needrom.com/wp-content/uploads/2013/05/ML_20130423_STAR_X920_ROOT_LDv0404.zip
""" when you flash click on UBOOT and selected "LK_CD2.bin" and flashed """"""
you will flash only this image now!!!
Good luck!:good:
Repost Links.
jsain said:
Sloution found.
Big thanks to dorschdns from chinamobiles.org
This is the solution:
1. Please load this Rom first:
needrom /wp-content/up...ROOT_V0401.zip
Hi, can you re post the 1st link, its not complete. Thank you.
Click to expand...
Click to collapse
Hello, I have a bricked x920 but e2001v21_v89_zlh_hd version, I tried everything but cant find solution.
I'm trying to flash using windows 8 but, I tried this rom but I still got "enable DRAM failed" as in the 1st post.
Any solutions?
Hi guys,
After flashing different Recovery ROMs I've finally bricked Star (Tengda) x920 8Gb device by flashing ROM from this link needrom.com/mobile/star-x920e-6/
Now when connecting it to Windows 7 x64 SP1 computer it is recognized as "MT65xx Preloader" device and after a few seconds disconnects itself. It connects/disconnects seems like forever.
I have installed driver for this device, but behavior stays the same. I've tried Mini Windows XP (x86) SP3, behavior stays the same.
What could be possibly done to recover device?
Please be patient, noobie here
UPD: This was resolved via video posted on needrom.com/mobile/star-x920e-6/ page.
star x920 flashing
I have the x920, rooted , added autocwm recovery,
Found rom on needrom, download on SD
Reboot in recovery
Clean data/fasctory reset
Clean cache partition
Clean dalvik
Install zip
Opening but it stops and says aborted !
What am i doing wrong ?
does anyone have the oem room of the star x920Q?? i cant fine it anyware...
somebody had this rom??
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
did you find a solution ?
arngrim said:
Hi, I need ROM 101_v82_zlh_hd for my X920 is a MTK6582... My phone just stuck in the boot logo animation.. can somebody help me please.. :crying:
Click to expand...
Click to collapse
Same problem here with the exact model. Any solutions? Thanks
Hi i have a problem i cant solve and hope some of your experts can help me. i got a Asus Transformer pad TG103CG. It wont start just goes in a boot loop, and hard recovery is not possible because its corupt. it dont show up as a device when i connect it to my computer. What i have tried is easyflash and ghostdriver with asus original stock firmware, but it wont work. i would like to ha have cyanogenmod on it but it i cant find it for my model. Anyway i just wont it to work again any kind of stock i ok. Can someone please help me
Try to factory reset from recovery then flash stock rom
messi2050 said:
Try to factory reset from recovery then flash stock rom
Click to expand...
Click to collapse
Hi i cant do a hard recovery because the partion seems corrupt i got a error messages after a few seconds.
Best regards Lars
Hi, is there a way the flash the stock of Wiko Lenny 2 ROM from SD Card? Because I stuck in boot loop and have Problems with USB. Wiko doesent offer a update.zip. I have the normal Bootloader. I have found a Rom. Is there any way the do this?
Hello bro...
Wilma456 said:
Hi, is there a way the flash the stock of Wiko Lenny 2 ROM from SD Card? Because I stuck in boot loop and have Problems with USB. Wiko doesent offer a update.zip. I have the normal Bootloader. I have found a Rom. Is there any way the do this?
Click to expand...
Click to collapse
Hello brother..did you find any way to flash it? Because I got one with the same problems than yours and do not find a way to flash it yet. it is get unplugged from the computer so the sp flashtool lauches an error..
Osmel86 said:
Hello brother..did you find any way to flash it? Because I got one with the same problems than yours and do not find a way to flash it yet. it is get unplugged from the computer so the sp flashtool lauches an error..
Click to expand...
Click to collapse
I remember that holding the Power Button while flashing solves my Problem. But I can't give you more Information. It is too long ago.
Thanks buddy...
Wilma456 said:
I remember that holding the Power Button while flashing solves my Problem. But I can't give you more Information. It is too long ago.
Click to expand...
Click to collapse
Thank you so much bro. I kept holding the power button and was able to flash it but the fact is that it is stuck on the Lenny 2 Logo. It's driving me crazy...Do you know how to fix this?
Osmel86 said:
Thank you so much bro. I kept holding the power button and was able to flash it but the fact is that it is stuck on the Lenny 2 Logo. It's driving me crazy...Do you know how to fix this?
Click to expand...
Click to collapse
Flashing the Phone new fixed the Problem for me, so I'm sorry but I can't help you more. But it looks like that your Problem is not caused by software.