Hello , i hava the HTC advantage wndows mobile 6 , and im tired o trying to instal real vga, nothing seems to works, anyboy can help?
thanks a lot!
You may already in VGA mode.
Please "Device Information"->"Hardware" tab to see resolution.
thats the capable resolution of the screen not the actual screen resolution. however its not the your in a 320x240 resolution its that the icons r to big
my resolutiom is480x640
the icnos are too big? how can i change this ?
thank you
yaobin said:
You may already in VGA mode.
Please "Device Information"->"Hardware" tab to see resolution.
Click to expand...
Click to collapse
Misstake!
Resolution VGA and mode VGA - different things.
For VGA mode use software from http://www.jaml.com/MvRTrueVGA/
vzuravlo said:
Misstake!
Resolution VGA and mode VGA - different things.
For VGA mode use software from http://www.jaml.com/MvRTrueVGA/
Click to expand...
Click to collapse
thank you i will try it
tryed it but some icons don´t apear, and ppc slows a bit down any other solution?
ruyzalim said:
thank you i will try it
Click to expand...
Click to collapse
Note that there are a few "issues", mostly cosmetic. The worst is the phone, which is mostly unusable. But VijayBigPhone helps: http://vijay555.com/?Releases:VJBigPhone -- you do have to rerun it each time and sometimes in between. But it does work. Do a search on this site for MvRTrueVGA to learn more.
wgary said:
Note that there are a few "issues", mostly cosmetic. The worst is the phone, which is mostly unusable. But VijayBigPhone helps: http://vijay555.com/?Releases:VJBigPhone -- you do have to rerun it each time and sometimes in between. But it does work. Do a search on this site for MvRTrueVGA to learn more.
Click to expand...
Click to collapse
thanks man
I'd suggest using with caution. I tried on my Athena, and whenever it powers up the device freezes at the today screen. I can't access the start menu or anything .. looks like I'm going to have to do a hard reset
mcwtrekkie said:
I'd suggest using with caution. I tried on my Athena, and whenever it powers up the device freezes at the today screen. I can't access the start menu or anything .. looks like I'm going to have to do a hard reset
Click to expand...
Click to collapse
Can you sync before it freezes ?
Probably you can uninstall the software via ActiveSync.
btw: are you talking about MvRTrueVga or VJBigPhone?
mojo2000 said:
Can you sync before it freezes ?
Probably you can uninstall the software via ActiveSync.
btw: are you talking about MvRTrueVga or VJBigPhone?
Click to expand...
Click to collapse
Note that I have had no difficulties with either, running a number of startup programs (PocketBreeze, WisBar, iLauncher) and a wide variety of applications.
I was using MvRTrueVga, hadn't tried bigphone.
it didn't let me sync either, so all I could seem to do was a hard reset .. wasn't happy lol
I use MVRTrueVGA 1.3 on my HTC Advantage running WM% for a while and it works mainly just right. Still, can anyone help me to also overcome some minor cosmetic challenges:
- Backlight Settings dialog
- Power Settings dialog
- Comm Manager dialog
- some of the indicators in the TOP bar about GSM, 3G and so on seem wrong
Is there a fix I can use?
Ah, and while I ask, anyone who have tried this on WM6 yet?
Works on WM6 aswell, same "cosmetic" problems,
but additionally, the volume slider doesn't work anymore (works again when truevga is turned off)
btw: some games don't work when its turned on:
worms world party,
age of empires ....
they start normally, but when I tap on the screen, nothing happens
Yeah, and I forgot that also the telephone dialer looks untidy as well.
So no fix for this at all? For a device coming with a 5 inch screen there much be a demand for this more than before...
Are there other (working) solutions than MvRTrueVGA?
mojo2000 said:
Works on WM6 aswell, same "cosmetic" problems,
but additionally, the volume slider doesn't work anymore (works again when truevga is turned off)
btw: some games don't work when its turned on:
worms world party,
age of empires ....
they start normally, but when I tap on the screen, nothing happens
Click to expand...
Click to collapse
Did you install SdkCerts before installing MvRtTrueVGA?
no, I never heard of this file.
what does it do? (I know its a bunch of certificates, but can it fix my problems?)
can I install it afterwards, or do I have to remove MvRTrueVGA first?
thx in advance
mojo2000 said:
no, I never heard of this file.
what does it do? (I know its a bunch of certificates, but can it fix my problems?)
can I install it afterwards, or do I have to remove MvRTrueVGA first?
thx in advance
Click to expand...
Click to collapse
I don't know what is in this file, but the instruction was to install that file before MvTRrueVGA.
yaobin said:
I don't know what is in this file, but the instruction was to install that file before MvTRrueVGA.
Click to expand...
Click to collapse
Thanks for this great tip!
After installing SdkCerts and a soft reset, my volume slider works again!
Related
hi,
is there any way to bypass screen alignment after hard reset???
Whats the point? After a hard reset the sceen alignment information is lost, to by-pass it would leave you with a very unresponsive screen.
it is broken screen ,and could not align screen in 4 corners,it misses 1 corner and cross sign return back in the center
I also would like to know how to accomplish this on an XDAII.
To rephrase: How can we bypass the screen calibration after a hard reset? There MUST be some way! Perhaps a different ROM version?
Thanks!
Try to insert your XDA2 into cradle and restore any backup you have. After reboot you would no longer need to realign the screen.
I'v tested this on old RoverPC S1 and it worked.
I actually came up with another (better) solution...
After a hard reset, put your XDA or XDA II into the cradle & run activesync. You can either set up a connection, or go as guest.
Use the 'explore' button to browse to the \windows\startup folder on the XDA, and delete the Welcome shortcut. You can then remove the XDA from the cradle, softboot, and bingo, no welcome message, no calibration.
Hope this helps. I'm surprised no one has come up with that before.
I am having the same problem but when I try to remove the welcome.exe it is saying "cannont delete file welcome: access denied". I is probably because the process has already started... any suggestions?
maybe you want to try this... i've tried it, works like a charm...
Documentation:
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
non....
This worked perfectly on my touch diamond! Thanks everyone. (this is another reason why we should never post questions without a simple google search!)
Finally Got past the aligmernt screen
I removed the welcome file and was able to get in, many thanks for the great support.
Frank
bypass calibrations via Bluetooth
Well chaps seems like bypassing using the cradle and softwares has proven to work...is there a way to doo this using the bluetooth?
i have an old O2 XDA IIs and its touch screen is broken but the lcd works fine, but i have no dock or usb cable, kindda lost those moving around the globe..
but i can get it to pair up with the bluetooth on the welcome screen before it asks for the calibration...yes yes y don i jst buy a new digitizer!!...wot fun would that be!!
Soo, any genius out ther willing to help out?...BTW its running the original ROM
Thanx ahead!
Welcome to forums
have a look here:
http://forum.xda-developers.com/showpost.php?p=3072857&postcount=10
Just create a (empty) file named "welcome.not" on your SD card and do a new Hard Reset (or soft reset, should also work)
Well,
For what it's worth,
I found out on my brother's Qtek S200 that was also in a loop, that it automatically passed the align screen after some 15 times.
Later I found this in the registry:
HKLM\Hardware\Devicemap\Touch\MaxCallError(=16)
So I assume you can tick the align screen 16 times before it continues?
nonentity said:
maybe you want to try this... i've tried it, works like a charm...
Documentation:
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
non....
Click to expand...
Click to collapse
Hi nonentity! I was having a helluva hard time iguring out how to get out of screen alignment on my treo pro (was stuck foe a long time) then I saw your post you've posted several yrs ago.. I'll tell ya.. you're my savior this little sweet app (remotealignment-CodeFactory) worked just like you said.. LIKE a CHARM.. I really was ready to ditch my phone away..THANK YOU SO MUCH!!!!!!
thanx a lot i was about to throw my ipaq to the garbage but you help me out thanx
It worked on my Treo Pro
Thanks so much¡¡¡
How to reinstall imate with a broken touch screen???
Dear folks,
I had been looking for solution to skip the screen alignment after a hard reset whcih is resolved now with help of a small but very useful application posted by some great gentelmen. But I am stuck with usual software installation after hard reset and I cannot go ahead as the button dont work and I cant press OK or anything else. I am using Imate Ultimate 8502. Can anyone help me in this? Thanks
bypass touch screen palm treo pro
panchobev said:
I removed the welcome file and was able to get in, many thanks for the great support.
Frank
Click to expand...
Click to collapse
how did you managed to delete the welcome file having permission error?
i had the same problem after hard reset it prompts me to align the screen which i believe malfunctioned so touch screen is not functioning.
im using Palm Treo Pro.
please advice. thanks!
Over 20 alignments and still in the loop
nypra1314 said:
I found out on my brother's Qtek S200 that was also in a loop, that it automatically passed the align screen after some 15 times.
Later I found this in the registry:
HKLM\Hardware\Devicemap\Touch\MaxCallError(=16)
So I assume you can tick the align screen 16 times before it continues?
Click to expand...
Click to collapse
I tried aligning for 20+ times on my i-mate PDA2k, and I'm still in the aligning loop. The CodeFactory tool worked, and thanks to nonentity for uploading it, because CodeFactory.es is now defunct.
BTW, can you please upload the .doc? Not sure it says anything super important, but it might be interesting.
This is a problem that plagues every WM6 ROM so far. For instance, receiving new emails *always* defaults to 'flash LED for 5 minutes' after a soft reset.
Even modifying the registry works for a while, but something changes it back again.
Could someone please figure this out?
floepie said:
...
For instance, receiving new emails *always* defaults to 'flash LED for 5 minutes' after a soft reset.
...
Click to expand...
Click to collapse
I did a quick test on my Prophet.
No matter how I change the setting in Sounds and Notifications, it will still "remember" the modified value on my machine after soft-reset.
No problem on my device.
same here no sounds problem
The same with me! no sound problems
floepie,
Do not use stylus for softreset.
Try to do softreset with any programms for reboot. psShutXp do it correct.
TrueNeytral1983 said:
floepie,
Do not use stylus for softreset.
Try to do softreset with any programms for reboot. psShutXp do it correct.
Click to expand...
Click to collapse
I always reset holding the power button and never with the stylus hole.
If I set 'receive new email' to a sound, the setting will stick for some time even after a reset, but after a day or 2 or even 3, the setting will always return to 'flash light for 5 minutes'. Try it with the 'receive email notification' yourself!
mewwoo said:
I did a quick test on my Prophet.
No matter how I change the setting in Sounds and Notifications, it will still "remember" the modified value on my machine after soft-reset.
No problem on my device.
Click to expand...
Click to collapse
The setting does stay put even after a reset. However, after a day or even a few, the setting will always return to 'flash light for 5 minutes'.
floepie said:
The setting does stay put even after a reset. However, after a day or even a few, the setting will always return to 'flash light for 5 minutes'.
Click to expand...
Click to collapse
sounds bad...
just check my machine again, it still keeps my yesterday change, and i will keep my eye on it.
BTW, have you tried the latest PDAViet ROM? Probably it has solved this issue already.
it's not an issue,you are doing something wrong
I have the same Problem... After a few days there is no notification for new SMS. Then I can change the options withaut any effect. Only solution is a Hardreset.
Martin
The same problem here using wm 6.1. Reminder and Text Message notification settings get lost after a while. Any idea?
Using some programs (eg, the latest Opera 9.5 betas) may disable notifications.
noone100 said:
The same problem here using wm 6.1. Reminder and Text Message notification settings get lost after a while. Any idea?
Click to expand...
Click to collapse
use schnap advanced config tool.
and enable the notification for sms delivery.
Hello all,
a version of opera doesn't disable notifications?
Thank you.
Sniper477 said:
Hello all,
a version of opera doesn't disable notifications?
Thank you.
Click to expand...
Click to collapse
Only Operas betas (as in, the ones direct from Opera.com/mobile) disable sound, and it may be only on some devices.
You should be able to use the Opera builds extracted from Diamond/Raphael ROMs with no issues.
l3v5y said:
Only Operas betas (as in, the ones direct from Opera.com/mobile) disable sound, and it may be only on some devices.
You should be able to use the Opera builds extracted from Diamond/Raphael ROMs with no issues.
Click to expand...
Click to collapse
I indeed use Opera 9.5 Beta. Will it just be fine to uninstall Opera 9.5 or do I have to manually correct some settings?
Thanks in advance.
By the way: How did you figure that out?
noone100 said:
I indeed use Opera 9.5 Beta. Will it just be fine to uninstall Opera 9.5 or do I have to manually correct some settings?
Thanks in advance.
By the way: How did you figure that out?
Click to expand...
Click to collapse
I think the latest build of the beta may have fixed it...
I worked it out as when I installed Opera it broke the sounds, and then, looking at Operas site I noticed there were some bug reports involving sound issues...
Uninstall, and then reset the sounds/notifications to how you want, and it should work.
Im using opera mini 4.1 and can report no problems at all btw opera mini is gr8, i love the app!!! so smooth!!
timmymarsh said:
Im using opera mini 4.1 and can report no problems at all btw opera mini is gr8, i love the app!!! so smooth!!
Click to expand...
Click to collapse
Mmhm... Opera Mini is great, but has one issue for me: It needs java!
l3v5y said:
Mmhm... Opera Mini is great, but has one issue for me: It needs java!
Click to expand...
Click to collapse
Out of curiousity l3v5y, why do you not like java? use too much ram? or you just prefer to have a clean device?
First off, thanks to kmeta for the registry edit that allows wifi to stay on when the device is in standby (can be found here).
The problem with that registry change is that it resets itself at reboot so that wifi turns off in standby again. Since this was a pain to have to keep modifying, and the only other solution in the above thread meant using MortScript, I threw this little app together. It simply runs at startup and sets the value of the registry key.
If it doesn't work on your device then it probably means that the registry change is device specific, but I don't believe it is. Please let me know if it doesn't work and we can take it from there.
Edit:
Note, even though the app only runs at startup, the cab file makes the registry modification so you don't have to restart after an install.
Thank you, will try it on my HD2!
Does it close itself entirely after changing the reg on startup?
barty22 said:
Thank you, will try it on my HD2!
Does it close itself entirely after changing the reg on startup?
Click to expand...
Click to collapse
Yes, it doesn't stay running. It literally makes the registry change and then shuts down - it's all it needs to do.
Works great! Thanks a lot
FYI, 'manually' changing the wifi in standby registry key on my HD2 with BSB Tweaks or HD2Tweak doesn't work for me. Even when doing it every time after a soft reset, wifi just won't stay connected after some time in standby mode. With this little app it simply works.
I wonder what it does different?
barty22 said:
I wonder what it does different?
Click to expand...
Click to collapse
I can only assume that it's using a different registry key - don't know.
Glad it works for you anyway
barty22 said:
Works great! Thanks a lot
FYI, 'manually' changing the wifi in standby registry key on my HD2 with BSB Tweaks or HD2Tweak doesn't work for me. Even when doing it every time after a soft reset, wifi just won't stay connected after some time in standby mode. With this little app it simply works.
I wonder what it does different?
Click to expand...
Click to collapse
That might be the cause, because BSB Tweaks only makes the registry changes when you soft reset which does nothing in this case, because the key is gone again after a soft reset.
Anyway, thanks for that nice CAB. I have yet to try it, but I am already saying thanks in advance and will post my results after I had the chance to test them tomorrow at university.
DaveLeh said:
That might be the cause, because BSB Tweaks only makes the registry changes when you soft reset which does nothing in this case, because the key is gone again after a soft reset.
Anyway, thanks for that nice CAB. I have yet to try it, but I am already saying thanks in advance and will post my results after I had the chance to test them tomorrow at university.
Click to expand...
Click to collapse
Thanks DaveLeh. Just out of curiosity, what phone do you have? I know for sure it works on the HD2, but would be interested in finding out the results on a wide range of devices.
johncmolyneux said:
Thanks DaveLeh. Just out of curiosity, what phone do you have? I know for sure it works on the HD2, but would be interested in finding out the results on a wide range of devices.
Click to expand...
Click to collapse
Unfortunately (well, at least for you, not so for me) I have a HD2, too. It's really quite the device.
DaveLeh said:
Unfortunately (well, at least for you, not so for me) I have a HD2, too. It's really quite the device.
Click to expand...
Click to collapse
Ah well - the more the merrier anyway!
And yes, yes it is quite the device
johncmolyneux said:
First off, thanks to kmeta for the registry edit that allows wifi to stay on when the device is in standby (can be found here).
The problem with that registry change is that it resets itself at reboot so that wifi turns off in standby again. Since this was a pain to have to keep modifying, and the only other solution in the above thread meant using MortScript, I threw this little app together. It simply runs at startup and sets the value of the registry key.
If it doesn't work on your device then it probably means that the registry change is device specific, but I don't believe it is. Please let me know if it doesn't work and we can take it from there.
Edit:
Note, even though the app only runs at startup, the cab file makes the registry modification so you don't have to restart after an install.
Click to expand...
Click to collapse
thank you for your pretty good works.
doesn't work
Xtanny rom 1.9 WM 6.5 HTC HD
Mesho.112 said:
doesn't work
Xtanny rom 1.9 WM 6.5 HTC HD
Click to expand...
Click to collapse
It should be fine, since it's running WM 6.5. Maybe it's something to do with the custom ROM you're using. Does it have any power saving features? Do you have any 3rd party power saving software that could shut down Wifi? Maybe HDTweak, as I believe that has an option to do the same as this program.
johncmolyneux said:
It should be fine, since it's running WM 6.5. Maybe it's something to do with the custom ROM you're using. Does it have any power saving features? Do you have any 3rd party power saving software that could shut down Wifi? Maybe HDTweak, as I believe that has an option to do the same as this program.
Click to expand...
Click to collapse
what about MortScrip I don't have it maybe this is the reason !
I'll give it try with MortScript and feed you back ..
Mesho.112 said:
what about MortScrip I don't have it maybe this is the reason !
I'll give it try with MortScript and feed you back ..
Click to expand...
Click to collapse
It doesn't use MortScript mate - that's not needed. Still trying to think what could be the problem.
it worked and don't know how it just fixed *lool*
Thanks johncmolyneux for this helpful app ..
Mesho.112 said:
it worked and don't know how it just fixed *lool*
Thanks johncmolyneux for this helpful app ..
Click to expand...
Click to collapse
You're welcome mate. Glad you got it working
Thanks!
Works great so far on my TMO TP2 with stock 6.1 ROM.
-Linc
seems like another a must have "cab"
i will install and test it out, will come back to you with my experience
thanks
lmyers33 said:
Works great so far on my TMO TP2 with stock 6.1 ROM.
-Linc
Click to expand...
Click to collapse
Thanks man - good to know
queer~dude said:
i will install and test it out, will come back to you with my experience
thanks
Click to expand...
Click to collapse
Thanks queer. I look forward to that
my report
johncmolyneux said:
Thanks man - good to know
Thanks queer. I look forward to that
Click to expand...
Click to collapse
first off, thanks for making this little apps. Unfortunately, this apps cannnot work my my Rom TESS_V2.F WWE, Radio Version 4.49.25.17 OS 2.2.21054(Build21054.1.6.7)
thanks
Just run this past anyone, see if they have the same problem. I am running Novembre5 latest rom, however this issue was occuring with all of the roms I have tried including the official Toshiba roms.
So I have a disappearing problem with my context menu. It has happened to me after I install some programs. I install Resco Registry Editor, Photo Viewer, Swype 2.0, CE-Star for Japanese Input, bunch of games, get my device just the way I want it.... then I can't select anything. I try to "tap and hold" to bring up the context menu so I can cut and paste in an email or delete something in Resco Explorer, however when I click on a blank part on the screen, the circles will show up and the 1 second animation will commence in which the circles will surround where my stylus has hit the screen and then once the circles go around my stylus clockwise then the context menu will for a very-split-second appear and then disappear. To get the context menu to stay, I need to hold the stylus on screen and then remove the stylus from the screen just before the context menu appears, then the context menu will stay.
Needless to say.. this is really annoying... when I initially hard-reset the device, there are no problems like this, however, after installing my programs, then I have this issue. Is there any quick fix for this problem? Does anyone have an idea what is up? I like the programs that I have installed, I especially need Japanese on my device so I hope it is not CE-Star, is there any advice someone can give to me? I guess the next step is, is to hard reset and install the programs one buy one and test them out for a while and then figure out what program it is that is making the issue appear. However even then.... I need the programs that I install... and damnitt I purchased most of them, hehehe so they have gotta work!
-Kilihari.
Kilihari said:
I guess the next step is, is to hard reset and install the programs one buy one and test them out for a while and then figure out what program it is that is making the issue appear. However even then.... I need the programs that I install... and damnitt I purchased most of them, hehehe so they have gotta work!
-Kilihari.
Click to expand...
Click to collapse
I believe this the best you can try for the moment...
Never encountered something similar...
Wow...
that was retardedly easy yet frustratingly hard. Ok, CE-Star was the culprit. You must do two things. When installing CE-Star one must uncheck the handwriting component when installing the Japanese IME. If you install the handwriting component then the context menu will disappear. Also, second thing, one you register and activate the program then it loads a service at boot called DynaNls.lnk in your \Windows\StartUp folder. This service causes MANY frustrating issues associated with your device including but not limited to automatically rebooting 3 or 4 times during the boot sequence, and then it will work. Basically CE-Star is totally compatible with Windows Mobile 6.5 however you gotta do a couple of tweaks. Wow, this has solved 2 months of issues. Have a good days pplz.
Kilihari said:
Basically CE-Star is totally compatible with Windows Mobile 6.5 however you gotta do a couple of tweaks. Wow, this has solved 2 months of issues. Have a good days pplz.
Click to expand...
Click to collapse
Dear Kilihari, please help to describe the "couple of tweaks" in details..
I did.. I did... I tellz ya!
simoncsk said:
Dear Kilihari, please help to describe the "couple of tweaks" in details..
Click to expand...
Click to collapse
I did, I did..... read my post above, I described the problem in detail, if you have any further questions, please ask a more specific question and I will very promptly reply .
-Kili.
Hi everyone,
I keep getting this message "Tap here to launch TouchFLO" come up when i return from screen lock . Whats wrong, i effectively have to load touchflo all the time.
I did reboot my phone to the manufacture settings, but sill the message is coming up everytime I close an app.
The phone is NEW without any applications,(got it 2 days ago)
Did anybody had the same error?
Thanks
No error in my opinion!
lev30ro said:
Hi everyone,
I keep getting this message "Tap here to launch TouchFLO" come up when i return from screen lock . Whats wrong, i effectively have to load touchflo all the time.
I did reboot my phone to the manufacture settings, but sill the message is coming up everytime I close an app.
The phone is NEW without any applications,(got it 2 days ago)
Did anybody had the same error?
Thanks
Click to expand...
Click to collapse
I believe this isn't an error, just the way things go with touchflo starting...
OK,
So anytime I close an application and return to Home screen Touchflo must restar?
I think that this is wrong, and touchflo sould start only when I restart my phone.
If every Htc touch 2 is the same than it's allright, I am going to live with it but I don't think so.
Anyway,
thks for the quick responde.
Missunderstanding!
lev30ro said:
OK,
So anytime I close an application and return to Home screen Touchflo must restar?
I think that this is wrong, and touchflo sould start only when I restart my phone.
If every Htc touch 2 is the same than it's allright, I am going to live with it but I don't think so.
Anyway,
thks for the quick responde.
Click to expand...
Click to collapse
Sorry, I missunderstood you, it is abnormal for touchflo to restart everytime you return to homescreen.
Consequently I believe it's time for hard-reset, if not solved it can be some corrupted (original) ROMconfused or hardware problem?!
I did a hard-reset but I've got the same message everytime.
I am going to call the service center tomorow.
Thk's again,
lev30ro said:
I am going to call the service center tomorow.
Thk's again,
Click to expand...
Click to collapse
Sadly, it's your only choice for the moment...
Good luck!
lev30ro said:
I did a hard-reset but I've got the same message everytime.
I am going to call the service center tomorow.
Thk's again,
Click to expand...
Click to collapse
this happens when the phone runs low on memory. happened a lot when I installed touchFlo on someone's old Polaris. check if you don't have something running in the background
good luck
How can I check if something is running in background?
sorry for asking , probably it's easy , I've tried at task manager but nothimg,
i did now a hard reset,
Let's see,
thanks a lot,
lev30ro said:
How can I check if something is running in background?
sorry for asking , probably it's easy , I've tried at task manager but nothimg,
i did now a hard reset,
Let's see,
thanks a lot,
Click to expand...
Click to collapse
Try mmtaskmanager2.2(if necessary) ...
or it happens mostly when you install a new theme with some files missing or not supported by Manila 2d v2 or you have replaced/deleted some theme files in/from windows folder.
Thanks and Regards
RK
rakesh_4utoo said:
or it happens mostly when you install a new theme with some files missing or not supported by Manila 2d v2 or you have replaced/deleted some theme files in/from windows folder.
Thanks and Regards
RK
Click to expand...
Click to collapse
Hi,
Yesterday I did a Hard reset and then I was opening each software one by one to see wich one will bring that message back again.
Finally found it !!!
It is the Quick GPS software , once I acces this software the massage is back for ever.
Now I am not downloading anything on Quick GPS and after the second hard reset done the phon is PERFECT.
rakesh_4utoo can you please help me with a Remote Desktop that's work on WM 6.5 rom 1.28.70.2.(66092)?
Anything I found on google is not working or it's freez.
Thank's in advance,