[Q] Tap here to launch TouchFLO-message - Touch2 ROM Development

Hi everyone,
I keep getting this message "Tap here to launch TouchFLO" come up when i return from screen lock . Whats wrong, i effectively have to load touchflo all the time.
I did reboot my phone to the manufacture settings, but sill the message is coming up everytime I close an app.
The phone is NEW without any applications,(got it 2 days ago)
Did anybody had the same error?
Thanks

No error in my opinion!
lev30ro said:
Hi everyone,
I keep getting this message "Tap here to launch TouchFLO" come up when i return from screen lock . Whats wrong, i effectively have to load touchflo all the time.
I did reboot my phone to the manufacture settings, but sill the message is coming up everytime I close an app.
The phone is NEW without any applications,(got it 2 days ago)
Did anybody had the same error?
Thanks
Click to expand...
Click to collapse
I believe this isn't an error, just the way things go with touchflo starting...

OK,
So anytime I close an application and return to Home screen Touchflo must restar?
I think that this is wrong, and touchflo sould start only when I restart my phone.
If every Htc touch 2 is the same than it's allright, I am going to live with it but I don't think so.
Anyway,
thks for the quick responde.

Missunderstanding!
lev30ro said:
OK,
So anytime I close an application and return to Home screen Touchflo must restar?
I think that this is wrong, and touchflo sould start only when I restart my phone.
If every Htc touch 2 is the same than it's allright, I am going to live with it but I don't think so.
Anyway,
thks for the quick responde.
Click to expand...
Click to collapse
Sorry, I missunderstood you, it is abnormal for touchflo to restart everytime you return to homescreen.
Consequently I believe it's time for hard-reset, if not solved it can be some corrupted (original) ROMconfused or hardware problem?!

I did a hard-reset but I've got the same message everytime.
I am going to call the service center tomorow.
Thk's again,

lev30ro said:
I am going to call the service center tomorow.
Thk's again,
Click to expand...
Click to collapse
Sadly, it's your only choice for the moment...
Good luck!

lev30ro said:
I did a hard-reset but I've got the same message everytime.
I am going to call the service center tomorow.
Thk's again,
Click to expand...
Click to collapse
this happens when the phone runs low on memory. happened a lot when I installed touchFlo on someone's old Polaris. check if you don't have something running in the background
good luck

How can I check if something is running in background?
sorry for asking , probably it's easy , I've tried at task manager but nothimg,
i did now a hard reset,
Let's see,
thanks a lot,

lev30ro said:
How can I check if something is running in background?
sorry for asking , probably it's easy , I've tried at task manager but nothimg,
i did now a hard reset,
Let's see,
thanks a lot,
Click to expand...
Click to collapse
Try mmtaskmanager2.2(if necessary) ...

or it happens mostly when you install a new theme with some files missing or not supported by Manila 2d v2 or you have replaced/deleted some theme files in/from windows folder.
Thanks and Regards
RK

rakesh_4utoo said:
or it happens mostly when you install a new theme with some files missing or not supported by Manila 2d v2 or you have replaced/deleted some theme files in/from windows folder.
Thanks and Regards
RK
Click to expand...
Click to collapse
Hi,
Yesterday I did a Hard reset and then I was opening each software one by one to see wich one will bring that message back again.
Finally found it !!!
It is the Quick GPS software , once I acces this software the massage is back for ever.
Now I am not downloading anything on Quick GPS and after the second hard reset done the phon is PERFECT.
rakesh_4utoo can you please help me with a Remote Desktop that's work on WM 6.5 rom 1.28.70.2.(66092)?
Anything I found on google is not working or it's freez.
Thank's in advance,

Related

bypass screen allignment????

hi,
is there any way to bypass screen alignment after hard reset???
Whats the point? After a hard reset the sceen alignment information is lost, to by-pass it would leave you with a very unresponsive screen.
it is broken screen ,and could not align screen in 4 corners,it misses 1 corner and cross sign return back in the center
I also would like to know how to accomplish this on an XDAII.
To rephrase: How can we bypass the screen calibration after a hard reset? There MUST be some way! Perhaps a different ROM version?
Thanks!
Try to insert your XDA2 into cradle and restore any backup you have. After reboot you would no longer need to realign the screen.
I'v tested this on old RoverPC S1 and it worked.
I actually came up with another (better) solution...
After a hard reset, put your XDA or XDA II into the cradle & run activesync. You can either set up a connection, or go as guest.
Use the 'explore' button to browse to the \windows\startup folder on the XDA, and delete the Welcome shortcut. You can then remove the XDA from the cradle, softboot, and bingo, no welcome message, no calibration.
Hope this helps. I'm surprised no one has come up with that before.
I am having the same problem but when I try to remove the welcome.exe it is saying "cannont delete file welcome: access denied". I is probably because the process has already started... any suggestions?
maybe you want to try this... i've tried it, works like a charm...
Documentation:
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
non....
This worked perfectly on my touch diamond! Thanks everyone. (this is another reason why we should never post questions without a simple google search!)
Finally Got past the aligmernt screen
I removed the welcome file and was able to get in, many thanks for the great support.
Frank
bypass calibrations via Bluetooth
Well chaps seems like bypassing using the cradle and softwares has proven to work...is there a way to doo this using the bluetooth?
i have an old O2 XDA IIs and its touch screen is broken but the lcd works fine, but i have no dock or usb cable, kindda lost those moving around the globe..
but i can get it to pair up with the bluetooth on the welcome screen before it asks for the calibration...yes yes y don i jst buy a new digitizer!!...wot fun would that be!!
Soo, any genius out ther willing to help out?...BTW its running the original ROM
Thanx ahead!
Welcome to forums
have a look here:
http://forum.xda-developers.com/showpost.php?p=3072857&postcount=10
Just create a (empty) file named "welcome.not" on your SD card and do a new Hard Reset (or soft reset, should also work)
Well,
For what it's worth,
I found out on my brother's Qtek S200 that was also in a loop, that it automatically passed the align screen after some 15 times.
Later I found this in the registry:
HKLM\Hardware\Devicemap\Touch\MaxCallError(=16)
So I assume you can tick the align screen 16 times before it continues?
nonentity said:
maybe you want to try this... i've tried it, works like a charm...
Documentation:
http://www.codefactory.es/downloads/mobile_speak_pocket/Remote_ScreenAlignment_Manual.doc
non....
Click to expand...
Click to collapse
Hi nonentity! I was having a helluva hard time iguring out how to get out of screen alignment on my treo pro (was stuck foe a long time) then I saw your post you've posted several yrs ago.. I'll tell ya.. you're my savior this little sweet app (remotealignment-CodeFactory) worked just like you said.. LIKE a CHARM.. I really was ready to ditch my phone away..THANK YOU SO MUCH!!!!!!
thanx a lot i was about to throw my ipaq to the garbage but you help me out thanx
It worked on my Treo Pro
Thanks so much¡¡¡
How to reinstall imate with a broken touch screen???
Dear folks,
I had been looking for solution to skip the screen alignment after a hard reset whcih is resolved now with help of a small but very useful application posted by some great gentelmen. But I am stuck with usual software installation after hard reset and I cannot go ahead as the button dont work and I cant press OK or anything else. I am using Imate Ultimate 8502. Can anyone help me in this? Thanks
bypass touch screen palm treo pro
panchobev said:
I removed the welcome file and was able to get in, many thanks for the great support.
Frank
Click to expand...
Click to collapse
how did you managed to delete the welcome file having permission error?
i had the same problem after hard reset it prompts me to align the screen which i believe malfunctioned so touch screen is not functioning.
im using Palm Treo Pro.
please advice. thanks!
Over 20 alignments and still in the loop
nypra1314 said:
I found out on my brother's Qtek S200 that was also in a loop, that it automatically passed the align screen after some 15 times.
Later I found this in the registry:
HKLM\Hardware\Devicemap\Touch\MaxCallError(=16)
So I assume you can tick the align screen 16 times before it continues?
Click to expand...
Click to collapse
I tried aligning for 20+ times on my i-mate PDA2k, and I'm still in the aligning loop. The CodeFactory tool worked, and thanks to nonentity for uploading it, because CodeFactory.es is now defunct.
BTW, can you please upload the .doc? Not sure it says anything super important, but it might be interesting.

Real VGA

Hello , i hava the HTC advantage wndows mobile 6 , and im tired o trying to instal real vga, nothing seems to works, anyboy can help?
thanks a lot!
You may already in VGA mode.
Please "Device Information"->"Hardware" tab to see resolution.
thats the capable resolution of the screen not the actual screen resolution. however its not the your in a 320x240 resolution its that the icons r to big
my resolutiom is480x640
the icnos are too big? how can i change this ?
thank you
yaobin said:
You may already in VGA mode.
Please "Device Information"->"Hardware" tab to see resolution.
Click to expand...
Click to collapse
Misstake!
Resolution VGA and mode VGA - different things.
For VGA mode use software from http://www.jaml.com/MvRTrueVGA/
vzuravlo said:
Misstake!
Resolution VGA and mode VGA - different things.
For VGA mode use software from http://www.jaml.com/MvRTrueVGA/
Click to expand...
Click to collapse
thank you i will try it
tryed it but some icons don´t apear, and ppc slows a bit down any other solution?
ruyzalim said:
thank you i will try it
Click to expand...
Click to collapse
Note that there are a few "issues", mostly cosmetic. The worst is the phone, which is mostly unusable. But VijayBigPhone helps: http://vijay555.com/?Releases:VJBigPhone -- you do have to rerun it each time and sometimes in between. But it does work. Do a search on this site for MvRTrueVGA to learn more.
wgary said:
Note that there are a few "issues", mostly cosmetic. The worst is the phone, which is mostly unusable. But VijayBigPhone helps: http://vijay555.com/?Releases:VJBigPhone -- you do have to rerun it each time and sometimes in between. But it does work. Do a search on this site for MvRTrueVGA to learn more.
Click to expand...
Click to collapse
thanks man
I'd suggest using with caution. I tried on my Athena, and whenever it powers up the device freezes at the today screen. I can't access the start menu or anything .. looks like I'm going to have to do a hard reset
mcwtrekkie said:
I'd suggest using with caution. I tried on my Athena, and whenever it powers up the device freezes at the today screen. I can't access the start menu or anything .. looks like I'm going to have to do a hard reset
Click to expand...
Click to collapse
Can you sync before it freezes ?
Probably you can uninstall the software via ActiveSync.
btw: are you talking about MvRTrueVga or VJBigPhone?
mojo2000 said:
Can you sync before it freezes ?
Probably you can uninstall the software via ActiveSync.
btw: are you talking about MvRTrueVga or VJBigPhone?
Click to expand...
Click to collapse
Note that I have had no difficulties with either, running a number of startup programs (PocketBreeze, WisBar, iLauncher) and a wide variety of applications.
I was using MvRTrueVga, hadn't tried bigphone.
it didn't let me sync either, so all I could seem to do was a hard reset .. wasn't happy lol
I use MVRTrueVGA 1.3 on my HTC Advantage running WM% for a while and it works mainly just right. Still, can anyone help me to also overcome some minor cosmetic challenges:
- Backlight Settings dialog
- Power Settings dialog
- Comm Manager dialog
- some of the indicators in the TOP bar about GSM, 3G and so on seem wrong
Is there a fix I can use?
Ah, and while I ask, anyone who have tried this on WM6 yet?
Works on WM6 aswell, same "cosmetic" problems,
but additionally, the volume slider doesn't work anymore (works again when truevga is turned off)
btw: some games don't work when its turned on:
worms world party,
age of empires ....
they start normally, but when I tap on the screen, nothing happens
Yeah, and I forgot that also the telephone dialer looks untidy as well.
So no fix for this at all? For a device coming with a 5 inch screen there much be a demand for this more than before...
Are there other (working) solutions than MvRTrueVGA?
mojo2000 said:
Works on WM6 aswell, same "cosmetic" problems,
but additionally, the volume slider doesn't work anymore (works again when truevga is turned off)
btw: some games don't work when its turned on:
worms world party,
age of empires ....
they start normally, but when I tap on the screen, nothing happens
Click to expand...
Click to collapse
Did you install SdkCerts before installing MvRtTrueVGA?
no, I never heard of this file.
what does it do? (I know its a bunch of certificates, but can it fix my problems?)
can I install it afterwards, or do I have to remove MvRTrueVGA first?
thx in advance
mojo2000 said:
no, I never heard of this file.
what does it do? (I know its a bunch of certificates, but can it fix my problems?)
can I install it afterwards, or do I have to remove MvRTrueVGA first?
thx in advance
Click to expand...
Click to collapse
I don't know what is in this file, but the instruction was to install that file before MvTRrueVGA.
yaobin said:
I don't know what is in this file, but the instruction was to install that file before MvTRrueVGA.
Click to expand...
Click to collapse
Thanks for this great tip!
After installing SdkCerts and a soft reset, my volume slider works again!

HTC album(no cab yet!)

I'm posting here so everyone can discuss their tries and possible solutions to get this boy to work on our prophets.
I'm using prophet touch VIII and as I start the app it just shuts down. I'm guessing not having the new htc camera botches this one... but if we install the camera then battery consumption will go up the roof.
So, anyone got any ideas to share?
(Cab is on page 2)
does it actually start before it closes down? when I start the exe the waiting cursor pops up and vanishes... and that's it.
E_Shinobi said:
does it actually start before it closes down? when I start the exe the waiting cursor pops up and vanishes... and that's it.
Click to expand...
Click to collapse
It does the same thing as yours on both cabs
there seams to be a problem with the coredll.dll that is not the same on prophet and the devices the Album is working on... so we need to patch the album to make it work.
It starts to load but it's wanting to start something that is missing so it's not there so it just closes again... it will not help to install the camera 4.11 sorry
gullum said:
there seams to be a problem with the coredll.dll that is not the same on prophet and the devices the Album is working on... so we need to patch the album to make it work.
It starts to load but it's wanting to start something that is missing so it's not there so it just closes again... it will not help to install the camera 4.11 sorry
Click to expand...
Click to collapse
so it's worst the i thought... no missing dll no missing reg key, coding needed...
I suppose you're all over this one now right? any ideia how long it will get for you to work your magic?
philocritus said:
so it's worst the i thought... no missing dll no missing reg key, coding needed...
I suppose you're all over this one now right? any ideia how long it will get for you to work your magic?
Click to expand...
Click to collapse
maybe prophet touch X will have it but who knows there might be a breaktrough tonight I'm shure I'm not the onlyone trying to get it to work on prophet so maybe someone else comes up with the solution and shares it with us
I think we all just have to wait. Someone will, as always, figure it out at last.
If I had the time to work into programming and stuff I'd love to figure it out myself, but I fear I am lightyears away from being that good...
Check this out. It works on Prophet!
http://forum.xda-developers.com/showthread.php?t=341131
thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you
I'm intergrating this to my roms
J Fortes said:
Check this out. It works on Prophet!
http://forum.xda-developers.com/showthread.php?t=341131
Click to expand...
Click to collapse
yes , this below given cab is working confirmed!!! awesome integration lovely thanx.
http://forum.xda-developers.com/attachment.php?attachmentid=56407&d=1193841089
something is wrong with my s200 running on Touch7,it doesn't show picture from sd card,even when I have changed My pictures to _My pictures in My documents on SD card?!
Can anybody tell me where I go wrong?
Thanx in advance
By the way great app thank you Xplode!
works perfect on my jamin. donno if anyone noticed but it slowed my device a little, even the touch scroll is slower now...using transformer 1.1...
thycpt737 said:
works perfect on my jamin. donno if anyone noticed but it slowed my device a little, even the touch scroll is slower now...using transformer 1.1...
Click to expand...
Click to collapse
it does slow down my system, too. (mysteriuos 1.0). Good news is that Storkwong has redirected the needed files' pathes to an excluded folder other than the default windows folder to minimize the effect of slowdown^^ >> http://forum.xda-developers.com/showthread.php?t=341131&page=3
the speed might be dramatically improved if it is incorporated in the cooked rom at the first place^^
drgrabez said:
something is wrong with my s200 running on Touch7,it doesn't show picture from sd card,even when I have changed My pictures to _My pictures in My documents on SD card?!
Can anybody tell me where I go wrong?
Thanx in advance
By the way great app thank you Xplode!
Click to expand...
Click to collapse
rename the _My pictures back to My pictures on sd only card and it should work the folder on main memory is needed to be changed
gullum said:
rename the _My pictures back to My pictures on sd only card and it should work the folder on main memory is needed to be changed
Click to expand...
Click to collapse
that combinatiom really works,it shows every pictures from my SD card,not only from My Pictures folder. thank U Gullum once again.
drgrabez said:
that combinatiom really works,it shows every pictures from my SD card,not only from My Pictures folder. thank U Gullum once again.
But,it is probably my stupidity,what is a move to get at menu,to see all pictures after I saw one in big format?
Click to expand...
Click to collapse
just a single tap and a menu pops up with some options press the bent arrow
this menu can also be called by pressing the midel button of the phone
I'm trying the Album, and I like it very much but I have problem with the zoom function. It' very difficult to use the zoom in command.
Another thing is that after Gullum suggestion (every time he has the answer) are showed all the picture present in the pda, I mean also the gif file form internet site. There is the way to open only the picture present in My Document folders?
Also it acts strange sometimes,when I choose picture from album to view in full size,and then get back to album again and choose other picture,it shows me that picture for a second and then shows the previous picture i choosed.
It just stuck at that picture and it shows it from time to time.maybe I was not quite clear but problem exists.
thanks for middle button,I have missed it somehow!
drgrabez said:
Also it acts strange sometimes,when I choose picture from album to view in full size,and then get back to album again and choose other picture,it shows me that picture for a second and then shows the previous picture i choosed.
It just stuck at that picture and it shows it from time to time.maybe I was not quite clear but problem exists.
thanks for middle button,I have missed it somehow!
Click to expand...
Click to collapse
same here and if i have too many pics the program just quits inbetween
J Fortes said:
Check this out. It works on Prophet!
http://forum.xda-developers.com/showthread.php?t=341131
Click to expand...
Click to collapse
You rule J Fortes! will try that one when I get home
Thank you!!!!!

TG01 "Tap-and-hold" Context Menu Disappearing Issue

Just run this past anyone, see if they have the same problem. I am running Novembre5 latest rom, however this issue was occuring with all of the roms I have tried including the official Toshiba roms.
So I have a disappearing problem with my context menu. It has happened to me after I install some programs. I install Resco Registry Editor, Photo Viewer, Swype 2.0, CE-Star for Japanese Input, bunch of games, get my device just the way I want it.... then I can't select anything. I try to "tap and hold" to bring up the context menu so I can cut and paste in an email or delete something in Resco Explorer, however when I click on a blank part on the screen, the circles will show up and the 1 second animation will commence in which the circles will surround where my stylus has hit the screen and then once the circles go around my stylus clockwise then the context menu will for a very-split-second appear and then disappear. To get the context menu to stay, I need to hold the stylus on screen and then remove the stylus from the screen just before the context menu appears, then the context menu will stay.
Needless to say.. this is really annoying... when I initially hard-reset the device, there are no problems like this, however, after installing my programs, then I have this issue. Is there any quick fix for this problem? Does anyone have an idea what is up? I like the programs that I have installed, I especially need Japanese on my device so I hope it is not CE-Star, is there any advice someone can give to me? I guess the next step is, is to hard reset and install the programs one buy one and test them out for a while and then figure out what program it is that is making the issue appear. However even then.... I need the programs that I install... and damnitt I purchased most of them, hehehe so they have gotta work!
-Kilihari.
Kilihari said:
I guess the next step is, is to hard reset and install the programs one buy one and test them out for a while and then figure out what program it is that is making the issue appear. However even then.... I need the programs that I install... and damnitt I purchased most of them, hehehe so they have gotta work!
-Kilihari.
Click to expand...
Click to collapse
I believe this the best you can try for the moment...
Never encountered something similar...
Wow...
that was retardedly easy yet frustratingly hard. Ok, CE-Star was the culprit. You must do two things. When installing CE-Star one must uncheck the handwriting component when installing the Japanese IME. If you install the handwriting component then the context menu will disappear. Also, second thing, one you register and activate the program then it loads a service at boot called DynaNls.lnk in your \Windows\StartUp folder. This service causes MANY frustrating issues associated with your device including but not limited to automatically rebooting 3 or 4 times during the boot sequence, and then it will work. Basically CE-Star is totally compatible with Windows Mobile 6.5 however you gotta do a couple of tweaks. Wow, this has solved 2 months of issues. Have a good days pplz.
Kilihari said:
Basically CE-Star is totally compatible with Windows Mobile 6.5 however you gotta do a couple of tweaks. Wow, this has solved 2 months of issues. Have a good days pplz.
Click to expand...
Click to collapse
Dear Kilihari, please help to describe the "couple of tweaks" in details..
I did.. I did... I tellz ya!
simoncsk said:
Dear Kilihari, please help to describe the "couple of tweaks" in details..
Click to expand...
Click to collapse
I did, I did..... read my post above, I described the problem in detail, if you have any further questions, please ask a more specific question and I will very promptly reply .
-Kili.

[Q] Sense slider showing unread SMS but no message present

Hi guys a question
for some reason i keep on getting the envelope on the Manila Slider showing me 1 unread SMS..
However the inbox is empty as is the deleted items..
Soft reset makes no difference.. and it comes back after a hard reset for some reason as well..
Any ideas?
Ta
nutmegy said:
Hi guys a question
for some reason i keep on getting the envelope on the Manila Slider showing me 1 unread SMS..
However the inbox is empty as is the deleted items..
Soft reset makes no difference.. and it comes back after a hard reset for some reason as well..
Any ideas?
Ta
Click to expand...
Click to collapse
Hey nutmegy!
You're not the first one to have this problem.
I don't have a 100% working solution for you, but please try this cab here:
http://forum.xda-developers.com/attachment.php?attachmentid=330509&d=1274554076
It worked for many people, but not for everyone.
Regards,
Lukas
Does not work for me as I can install but nut start the cab! Is it startable? The green 1 is still there...
Broetchen said:
Does not work for me as I can install but nut start the cab! Is it startable? The green 1 is still there...
Click to expand...
Click to collapse
Did you try it with sense disabled? Here is another option, copy exe to phone and run and then reboot, Fix unread count
i have the same issue and the cab or exe file didnt fgix it for me the old way i have got rid of it is to delete all my messages, but restoring them is a pain as it can only be done 1 at a time! ive had this issue for a while now, im using cleanex DSE v6 rom, with radio 2.15

Categories

Resources