Hi, who has problems with his Bluetooth headset after the WM6 upgrade?
My Bluetooth headset used to start looking (by beeping) for the last connected device when I power it on. It doesn't do that while paired with my X7500 WM6. It does start looking MANUALLY when I press the call button on the headset and when it's connected (you see the headphones icon in the phone screen appear), it only stays that way for a few seconds. The headphones will disappear again and the connection has been lost.
When I then push the headset call button again, it starts looking again, connects again, and then disconnects again after a few seconds.
I first thought it was the headset, but it works just fine on all other devices I have, but just not the X7500 anymore. I'm sure it has something to do with the WM6 upgrade, because it was working the proper way while running WM5.
Any tips or suggestions??
The icon disapears, but calls still go through to it when they come in for me.
Have you checked to make sure it doesnt actualy work when an incoming call arrives? the icon is misleading.
No, the connection is lost when the icon has been disappeared, because the headset will start reconnecting/looking for the device when I press the headset call button.
If it was still connected it should initiate the voice speed dial.
strange, i have many headsets and dont have that problem with any.
I do have it randomly stop talking to the headset at all, and require a delete/repair, (one headset still wont connect, but i think its a crap headset issue). but when paired, they normaly behave afterwards.
Im on wm6 btw.
BUMP. This has been happening for me since my WM6 upgrade.
HBH-PV720
AMEO with HTC WM6
Please can anyone can help with this ?
DiGRem
Delete and pair
I have had issues with several Nokia phones when upgrading firmware. The other bluetooth units, previously paired with the phone, still thinks that they should be paired after the upgrade. Only issue is that the phone has totaly forgotten of all paired devices. This resulted in many connection errors, when the peripherals wanted to connect, but the phone refused. Can you somehow reset the headset? Delete the pairing on the phone, pair the headset with another phone/pc, and then, re-pair it with the athena again. Just to make sure that it has no old pairing info.
-Johan
Related
Hi,
I use my iMate Startrek with a set of a2dp headphones (the iMuffs), and I have to manually tell the phone to connect to the iMuffs using a2dp through the "Set as wireless stereo" option in the settings, can this be done automatically?
Another thing is that if I get a call while listening to music, the microphone on the headset doesnt work very well, and I have to shout for the person to hear me. I think that the mic in the headset is not being used. Has anybody had this problem and solved it?
Does anyone know if there are some registry settings that need to be tweaked to get these problems solved?
Thanks a lot.
I use an itech s38 and doesn't have a problem with the mic.
I do have problems with automatic connections.
after setting up properly, if the headset gets disconnected,
the next time it reconnects by itself is always on the headset profile
and mostly only connects if i make a call
So even when no indicator is shown I would assume that seconds
before ther call is answered the sound would be transfered to the headset
that's not so much of a problem
what really sickens me is that if i wanted to
listen to music via the headset when headset profile is connected
i would have to
1.hit the stick once to go to comm manager
2.hit "2" to turn off BT
3.exit to make sure action is done
4.hit center to go to comm manager again
5.hit "2" turn it on (making sure it doesn'ty connects to headset profile first)
6.hit Settings to go to BT settings (hit one or enter to getto that's two presses)
4.hit menu
5.hit devices
6.hit menu
7.hit set as wireless stereo
8.hit done
9.hit done again
10.hit exit
11.hit start
12.hit windows media
13.mess another big while in windows media playlists
..........
now that's too much ... many places i could use the home button
to exit quickly .. that's not what's frustating
what i need actually is a shortcut to the BT devices page
and a smarter profile to connect to wireless stereo for me
without having to turn off headset profile first
I am using HP Stereo Bluetooth headset with my QTEK 8500. It works fine besides the reconnection. If I turn the headset off in order to reconnect I have to go to the BT settings and set the headset to Stereo Headset again. I beleive your problem ocurs because your headset is also a handsfree headset, which HP is not.
I do beleive this behaviour is by design. Although I do not seen to understand the logic behind it.
i got a I-tech r35 headset, i have no problem pairing the headset with the phone for the first time, however, after i turn off the headset and try to pair it again at a later point, i can't....
the phone only recognize a headset for the phone, and no stereo music from the headset...
is there any specify setting i need to change?
thanks
anyone have the same problem??
I have the same one, and it works fine for me.
If you recieve only the phone on your stereo bt.
try to go BT config, then on devices list, tap and hold on i.R35 or whatever name you've got on it, a list will appear, then select "set as stereo.."
That should works, at least it does for me.
What rom are you using? I'm on Schaps 3.54c right now.
Hope this help.
Regards
Hi!
Yesterday I went through the upgrade of the official Dutch HTC Europe WM6 release. No problems there and WM6 works a charm.
The problem came to the light when I paired my Motorola HT820 A2DP headset. The music in the Windows Media Player plays well through A2DP, but only for a few seconds. After that it starts pausing every second. The same goes for all types of audio I play (video, TCPMP, etc).
Who can help? There was no problem using WM5 and a previous WM6 ROM (unofficial and WWE).
Thanks!!
Sounds like your sampling rates are off. Check this thread for info:
http://forum.xda-developers.com/showthread.php?t=308752
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
nrm said:
Search on Priority256_fix. That seems to be the final piece of the puzzle to fix the blue tooth problem.
Click to expand...
Click to collapse
Or search on Bluetooth Priority Fix.
Thanks for the tips.
Ofcourse there will be always another problem: my Motorola A2DP headset now fails to autoconnect (after being paired) to the X7500. Normally when I turn on the headset you will see a headphone/musictone icon in the top bar and hear the "connect sound" through the headset. This doesn't happen now. I need to soft reset first, and after that it will work again, for a few times.
Deleting the headset and pairing again works, but the autoconnecting stops working when I try again later.
Damn, what is it with the official WM6 and A2DP?
apd said:
Or search on Bluetooth Priority Fix.
Click to expand...
Click to collapse
Hi, I still experience lags and pauses while using A2DP. With the registry tweak Priority256 it even gets a lot worse!!
Any more suggestions? I tried several headsets and even the Parrot Sound speaker set, but all of them are the same. So it's not the headset.
EDIT: I figured that it has something to do with the normal Bluetooth headset I use. I want to use the A2DP stereo headset simultaneously with the normal headset for phone calls. The A2DP headset only uses "Stereo audio" when connected, while the normal headset uses "Headset". This was no problem at all with all other devices I had and no problem as well on the X7500 running WM5. With WM6 things are different I guess.
A2DP WITHOUT the normal headset connected is no problem, like it should work. WITH the voice headset connected simultaneously, the lags come up, the prioriry fix makes no difference in this matter. And I'm stubborn, I want to have the voice headset to be connected at all times, the A2DP headset when I want to listen to music.
Any thoughts?
For whatever reason, my plantronics voyager pro disconnects while i'm in the middle of a phone call. it doesn't happen all the time, just randomly. As soon as I notice that it's no longer working, i look at my phone and it still has the headset icon active. I hear the disconnect beep in my headset, and when i try to turn hands free off, it won't turn off
I end up having to hang up, and call back the person. Not very professional when doing business, i'm considering going back to my old voyager headset. Any feedback or possible fixes?
kidvi said:
For whatever reason, my plantronics voyager pro disconnects while i'm in the middle of a phone call. it doesn't happen all the time, just randomly. As soon as I notice that it's no longer working, i look at my phone and it still has the headset icon active. I hear the disconnect beep in my headset, and when i try to turn hands free off, it won't turn off
I end up having to hang up, and call back the person. Not very professional when doing business, i'm considering going back to my old voyager headset. Any feedback or possible fixes?
Click to expand...
Click to collapse
The suggestion what i give is bit irritating but wll be better than now, Never connect your bluetooth automatically, Once u disconnect and reconnect your BT just remove them from your pairing device and re-pair. Now u wont get Disconnected wth ur BT but if u connect ur BT automatically then the problem continues
I thought this was fixed in JB, but I guess not.
I've got my GS4 paired with both the car and my Jawbra headset. All works fine in either scenario, but occasionally I'm on a call using my car BT and want to switch to my headset, or visa verse. Isn't there a way to just click a button/option in phone and switch the device? Anyone found an App for that (I've been searching for hours).
I'm hoping that I'm just missing something, but I've been trying to Google and search these forums to no avail.
I can't try it but what can't you just press the headset button in the midcall menu?
SmokeyMon said:
I can't try it but what can't you just press the headset button in the midcall menu?
Click to expand...
Click to collapse
That sounds like a great idea, I would love it if it worked that way. But the phone get's itself "paired and connected" to the car, and it is not connected to the Jawbone. The only thing I found to change it during the call is to turn off bluetooth, which forces a pickup on the handset. I suppoose I could try to turn BT back on, and get it to connect to the Jawbone, but that's no practical while driving and trying to pay attention to a phone conversation.
A simple pop-up with "connect to Jawbone" or "connect to car" would be nice during the call.
If you just want to you your headset to take calls and your car bt for audio, try deselecting "phone" in your bt device options on the phone.
Also I think this issue is more with the Samsung phone then with Android. My Nexus 4 was able to do just this and also allow me to take calls on my bt headset while my phone was plugged into the aux jack in my car.