When i enable my phone with comm manager, my 3G data connection is also getting enabled and it shows the connection duration 1, 2 ,3....
Then i went to Phone settings --> Band and selected GSM insted of Auto.
Now "Edge" is getting connected the same way.
Please help me as i am not using my phone !! afraid of Bills !!
EDGE is via GSM the only way to kill that is to disable you GPRS connection entirely by removing the settings.
GPRS and EDGE are via GSM
3G and HSDPA are via UMTS.
I will suggest Bandswitch manager the freeware one (1.23) works great.
You can chose the band (UMTS/GSM), great to save battery life, and to enable/disable data connection, AUTO or just when needed.
Try to find it somewere...
both of you are wrong, sorry no offense. go to phone then menu/options/band and under "Select your network type" select gsm. and the fastest you will get is edge. yup, found that out the hard way
irus said:
both of you are wrong, sorry no offense. go to phone then menu/options/band and under "Select your network type" select gsm. and the fastest you will get is edge. yup, found that out the hard way
Click to expand...
Click to collapse
going to phone>menu>options>band is the same as going to settings>phone>band.
Its the same thing.
But the OP seemed to say that EDGE was also unwanted so I advised the only way to stop GPRS connecting at all is to remove the settings.
or you could go to settings->connections->connections->advanced->select networks and choose "my work network" for both internet and work. this will ensure that your device will not seek a connection for GPRS etc.
mrvanx said:
going to phone>menu>options>band is the same as going to settings>phone>band.
Its the same thing.
But the OP seemed to say that EDGE was also unwanted so I advised the only way to stop GPRS connecting at all is to remove the settings.
Click to expand...
Click to collapse
ya your right i did not read the whole thing my apologizes
docraj said:
or you could go to settings->connections->connections->advanced->select networks and choose "my work network" for both internet and work. this will ensure that your device will not seek a connection for GPRS etc.
Click to expand...
Click to collapse
Thanks a lot!! ... now it stops connecting automatically to t-mobile data connection and i have peace of mind!!
Every solution is good, I just prefer to tap in a page like this and choose (what and when) band/connection... and enable/disable it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bandswitch 2.0
It's already version 2.0 of Bandswitch software.
MrHagen said:
It's already version 2.0 of Bandswitch software.
Click to expand...
Click to collapse
Is it freeware?
My 1.23 release is freeware and I've seen also the 2.2 release but it isn't free anymore (and has the same band control I have on mine)
Related
I was wondering where the toggle to only use 2G networks has been moved since i can't find it on the usual location of Settings-> Wireless and network -> Mobile Networks
In my last phone (and to my knowledge, on all android phones) there is an option there to only use 2G networks. But on my Galaxy S2 it's nowhere to be found.
Has this been moved to another location? Has it been disabled?
This is a screenshot of what i see:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hold the power button and select data connection.
There is no option called "Data connection". There is an option called Data Network mode but that simply turns off mobile data connections. This is the screenshot:
From settings select "Only GSM". That corresponds to 2G.
Sent from my GT-I9100 using XDA App
Another way to do is use the code *#*#4636#*#* >> Phone Information >> choose the network mode you prefer.
You can set it in Settings > Wireless & Networks > Mobile Network > Network Type > GSM Only
Or just download Extended Controls and use the widget
EDIT: At least it's there on mine
Hmm so it appears that my phone doesn't have that option. Maybe because it's carrier locked our something? It's a 3 phone.
Sent from my GT-I9100 using XDA App
I think "3" is only 3G, nothing to switch
I meant my phone is from the carrier 3 in the UK. Maybe they put their customized ROM or something on the device and I am missing the option to switch to GSM only.
The *#*#4636#*#* option works but is not a viable solution. It takes too long to go to the option. Plus I will surely forget the number. Any other suggestions?
Get unbranded firmware?
Well I don't want to change my entire firmware just for that. If the need arises (could be very soon) I will but for now I was hoping for another solution
Sent from my GT-I9100 using XDA App
All Three network phones tend to have this function removed as by default they are a 3G network. Anytime you roam onto 2G it is using another network (I believe it's Orange) and costs Three money.
The 3 network in the UK only operates on 3G, so there is not GSM/GPRS/Edge option available on their network.
Same problem, semi-solution
I also have a samsung mini bought from 3 uk which I unlocked to use another sim and a sim in Africa (where I have to get a full day's battery).
I put the *#*# etc. number as a contact. I can't call directly from the contact, but typing *#*# is enough to bring the number up so I can copy.
I understand why three did it, but it is annoying.
I hope that helps, but if you found a better way, please share!
Use this
thanks,also looking for this
Also for Note ?
ketan_naik said:
Use this
Click to expand...
Click to collapse
Will this also work for a Galaxy Note ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
based on the above SS
does it mean that my phone has FD enabled but the network does not support it?
also i searched and googled but could not find a fix for the l2_hsic wakelock.
btw my fd settings are as follows
lcdonfdtime = 5
lcdofffdtime = 5
and under nwkinfo, dormancy is set to on
i am running stock rom from my carrier with cf root, so the settings should be optimized for my carrier right?
See here
ausdim said:
See here
Click to expand...
Click to collapse
yes that screenshot is with that zip flashed
exge said:
yes that screenshot is with that zip flashed
Click to expand...
Click to collapse
Sorry wrong link.
Link fixed.
If you cant do tha send me the data/data/com.android.providers.telephony/databases/nwk_info.db
and i can make a zip file for you to flash it with CWM.
i know how to disable it with root explorer, i just need to know if the picture means that fd is not supported on my network.
if so, i will disable it.
PS: when i start to use the data connection, it goes to H+ which is evolved hspa, then when i stop surfing, it goes back to H which is hsdpa.
does this mean that the phone is using fd, or should it go even lower to like umts?
38mins out of 9hrs actually doesnt seem like alot, which is why im confused if FD is supported by my network.
exge said:
i know how to disable it with root explorer, i just need to know if the picture means that fd is not supported on my network.
if so, i will disable it.
PS: when i start to use the data connection, it goes to H+ which is evolved hspa, then when i stop surfing, it goes back to H which is hsdpa.
does this mean that the phone is using fd, or should it go even lower to like umts?
38mins out of 9hrs actually doesnt seem like alot, which is why im confused if FD is supported by my network.
Click to expand...
Click to collapse
I think you have to disable it because i have the same situation like you and i know that my provider doesnt use FD.
ok i have disabled it and secril_fd-interface wakelock disappears from my BSS.
will monitor to see if the battery really improves
Hello all,
I recently purchased my 5x and i have some questions about the LTE bands.
I do speedtests from time to time and sometimes i get 5 mbits, sometimes 10 and sometimes 40+
All of these results in the matter of a few minutes in the same house.
Until recently I did not know why this was, but now I understand it's because of the bands my phone switches between (3,7,40,41)
I wanted to know if there is a way to force or tell the phone to prefer one band to another, because even -115 dbm on band 40 is 5-7 times faster than band 3. If not, then Is there at least a way to check what band you're on, ive tried apps like LTE Discovery and they don't manage to tell me what band or frequency im on, and most of the USSD codes that should tell me this info don't work.
I would really appreciate it if someone with knowledge on this matter can help me out here
androiduser192 said:
I would really appreciate it if someone with knowledge on this matter can help me out here
Click to expand...
Click to collapse
https://jioappstore.jio.ril.com/cms/ install netvelocity apk then run speed test. Under settings, enable advanced mode.
It'll display the band you are currently on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As far as I know, you can't force a phone to use a specific band (it depends on the area you're in)
After installation the app crashes on startup
androiduser192 said:
After installation the app crashes on startup
Click to expand...
Click to collapse
FYI, you can't force the phone to use a specific band, it depends on the area where you are
21031980 said:
https://jioappstore.jio.ril.com/cms/ install netvelocity apk then run speed test. Under settings, enable advanced mode.
It'll display the band you are currently on.
Click to expand...
Click to collapse
Hi there,
Unfortunately this app is not working on my device, maybe it's network dependent (Jio)?
would love to have a working app like this as I'm very curious about which lte band
my phone is on. tried couple dozen apps to no avail so far. and it seems huawei has
disabled radio info and some other parts of it's service menu.
anyone knows any other way?
Since the common hidden menu code does not work on our device ( *#*#4636#*#* ), there is another way we must use.
1. Download this app from the Play Store: Force LTE Only (4G/5G)
2. Launch app and choose "METHOD3: (Android 11)"
3. Under Set Preferred Network Type dropdown, select the network type you want.
-- to get 4G/LTE and below, set to "LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA"
-- to get 5G, set to "NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA"
This was the only way to enable 5G for me since I am in Canada.
Only issue with this is that it may not stick once you reboot. You would have to follow these steps again.
Thanks man. This helped me with my Global variant. It got 5g to kick on when I couldn't see it in the menus.
Update - Found the shortcut keys to get directly to it
*#*#4636#*#*
lowridincrew said:
Update - Found the shortcut keys to get directly to it
*#*#4636#*#*
Click to expand...
Click to collapse
I don't have the phone anymore, but when I did, I had tried that earlier; it never worked for me.
lowridincrew said:
Update - Found the shortcut keys to get directly to it
*#*#4636#*#*
Click to expand...
Click to collapse
It didn't work on mine. When I punch in the final *, it just goes to my contact list.
Although the app ForceLTE mentioned earlier by TikiThePug did work perfectly.
I finally get 5G all day long on a T-Mo SIM.
It's such a fast, beautiful phone and now it has all its functionality.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey I just started using Verizon coming from Fi. I have an unlocked.pixel 6 from the Google store what should my settings be? I know I need NR but what else or what would work best. I'm on new York it that matters at all.
And I can get to the menu via *#*#4636#*#* I just need to know what would work best for me .
I keep trying to set to NR/LTE/TDSCDMA/GSM/WCDMA ( Only way to get full speed on 5G
for some reason my setting keep resetting to NL/LTE/GSM/WCDMA (Very slow as if running 3G but says 5G)
How do I get my setting to stick Oh I'm on T-Mobile Network
rinnycoop121 said:
I keep trying to set to NR/LTE/TDSCDMA/GSM/WCDMA ( Only way to get full speed on 5G
for some reason my setting keep resetting to NL/LTE/GSM/WCDMA (Very slow as if running 3G but says 5G)
How do I get my setting to stick Oh I'm on T-Mobile Network
Click to expand...
Click to collapse
It's always going to set to what your network tells
This menu isn't actually real control
Bought an unlocked 256G pixel 6, looking to disable 5G to get longer battery life. However I am not seeing the "Preferred network" option under SIMS. Is there a secret handshake?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi fella. Go to Settings. Type preferred in to the search bar.
Select preferred network type.
Bob's your uncle.
preferred does not give you what you are looking for. Preferences would be the better term.
But even when typing preferences it takes you to the same page and there are no options.
I wonder if you have to change the name of the access point to exclude 5G. Something "older" than nextgenphone
Nothing under Developer Options either it seems.
sorry Bob
cheers
GroovyGeek said:
Bought an unlocked 256G pixel 6, looking to disable 5G to get longer battery life. However I am not seeing the "Preferred network" option under SIMS. Is there a secret handshake?
View attachment 5489551
Click to expand...
Click to collapse
Try this method. The details of what you are doing (or not) may matter . . .
To change from 5G to LTE as the preference --
Safe mode (long press power, hold the restart button and select safe mode)
After rebooting, turn off airplane mode.
then
settings > network & internet > internet > cog next to your provider > preferred network type
Reboot to exit safe mode
GroovyGeek said:
Bought an unlocked 256G pixel 6, looking to disable 5G to get longer battery life. However I am not seeing the "Preferred network" option under SIMS. Is there a secret handshake?
Click to expand...
Click to collapse
Or try this,
Dial *#*#4636#*#*
This will open a Testing menu,
tap phone information, and go down to Set preferred Network Type,
Select GSM/WCDMA/LTE(PRL)
Exit out and reboot.
LeoD said:
Or try this,
Dial *#*#4636#*#*
This will open a Testing menu,
tap phone information, and go down to Set preferred Network Type,
Select GSM/WCDMA/LTE(PRL)
Exit out and reboot.
Click to expand...
Click to collapse
Ok, so I changed it but forgot to note what the original network type was. Anyone can point me in the right direction? Thx
NR/LTE/GSM/WCDMA is what my AT&T Pixel 6 is set to.