Hi, need help here.
I just got me a new Atom Exec. Every time I tweak my registry like i normally do with my Blue Angel and himalaya (Change SIP, screen sensitivity, and other registry tweaks in the wiki site, etc.), doing it all correctly and restarting. The Atom Exec wont turn on and get stuck in a white screen.
I have to hard reset it always, tried it several times. Same happens with my Wizard. Are their registries modifiable? How do i permanently set my input method (i always use Blimkeys and want to set it in default) and change the touch sensitivity?
Related
Not sure if this is the correct place to ask this, and I've found various threads that discuss registry settings, themes and the splash screens, but none seem to specifically address the following issue.
On boot-up, my welcomehead.96.png graphic initially displays correctly, then after several seconds, solid colored bars appear (i.e. Today screen header/ footer) in the lower and upper portion of the screen partially covering the welcomehead graphic. I've tried replacing the welcomehead graphic, the obstructions are still there but appear slightly different (upper bar is a portion of the original graphic but slightly shifted to the right and partially transparent).
I've tried tweaking HKLM\Software\Microsoft\Color Basehue, that doesn't seem to fix it. Also, I believe the problem began after adding a WMBE.cab theme from Black 3.0.1 (now running Custel 2.5 bbc). The weird beahavior did not manifest on the initial flash on the Custel ROM.
EDIT: Actually, on closer examination, it looks like the welcomehead image has been shifted up due to the insert of a footer bar.
Could it be an ini or setup file??
iLauncher Caused It
After a hard reset, and trial and error application re-installation, I figured out that iLauncher 3.0.04 was causing the problem. welcomehead.96.png loads initially no problem, then after a few seconds the image flashes and a lower system tray bar is inserted and a portion of the original images shifts up about 60 pixels. Before install and after removal of the app, welcomehead works correctly.
iLauncher Fix
Either iLauncher 3.0.05 fixes the welcomehead issue, or installing the app to the SD card took care of it, not sure which.
Thread can be closed...
3.0.05 Doesn't Fix It
It looks like 3.0.05 didn't actually fix the issue, once trial period ran out I entered an S/N and the problem returned. So something about activation causes the issue. I may re-flash my ROM (or try another ROM) and register right away and see if problem persists.
Hello,
now I use WM6 for a long time, but i have a big problem, the device lock.
With older builds of WM6 de device is after reset(but not every) locked and the unlock code didn't work.
so my question ist, is this problem now fixed in the new builds? I don't want to test because evertime my data deleted without a backup^^
if the problem isn't fixed, is there any alternative?!
i want to use the device lock because of the security, but wm5 isn't an alternative^^
(who have once run wm6 on his prophet, don't want to miss it^^)
i have used the search button but with no result..
thx 4 answer
Eckki
I've never had that problem. I've been using later ROM versions.
after i enter the lock code the screen makes an irritating blink then its shows the today screen, there is no problem with wm5, can this blinking problem be resolved?
Have you tried a different ROM?
all wm6 rom do the same thing, after u set a lock key, press power off to turn backlight off, then press the power button again to turn on the backlight and there's an irritating blinking of the screen try it yourself
It use to happen on my Orange WM5 ROM aswell... I'd ask a cooker to see if there's anything that can be changed...
I have one problem not only with this room but with all rom for exec from orginal till this one
unlike HTC device in boutton no lock tab that allows to lock all buttons except power
and when it in my pocket it start to gives screen click that lunch many prog!!!
any whay to found this lock tab or any way to lock screen?
I'm using TJ's Atom Exec Black Manila 2D (Builtin) CE and OS 21014 with same problem
with regards
no one have same problem?
you can always use S2U2 or throttle Lock to lock your screen and bring it to standby.
Search for the program either in xda dev forum or google
what about just holding red phone (close/reject call) button for little longer (~10sec) will do the same. It's work for my HP 6815 with all roms. Also did you checked settings -> system-> key lock -> lock all buttons except power button.
Hi
I seem to experience this problem on all HD2s. I activated the phonelock on HD2 and used a simple PIN for unlocking it. When I'm in the LockScreen, keying my PIN, the phone goes to suspend mode (or it seems like it, since the screen just blacks out and i need to press the power button again to see the lockscreen) after about 13 sec, everytime. This phenomenon happens only when phone is using battery power. It works fine when running on external power.
Is there a way disable this issue, or extend the time it blacks out. I'm using the default WM6.5 rom 1.66.707.1
Please help, Thank you.
same problem with me ! any solutions ???
settings menu all settings system power backlight
try increasing the timeout.
also settings menu all settings lock
see what options are in there. (mine won't start so i can't test it.)
I have tried all the settings i can find on the phone. I even tried changing Registry values that might be related to the timeouts. but still the same.
The screen will black out even while you are typing, so this rules out all the timers that will suspend the phone when idle for too long.
Please help, as this is a big issue for me.
Thanks.
Hello
Sorry for my bad english but I hope you can still help me here.
So my HTC HD2 is unfortunately got wet before half a year since going on WM 6.5 & WM7 after 4 seconds the display background illumination (when I then finger from the display assume) from but the screen (you can see if mans obliquely reflect the sunlight) remain on.
If I use Android, I have the problem not because it stays on forever.
Does anyone have a tip on what to do can so what the difference is on Andoid and WM.
Would love to use WM7 but it does not work unfortunately.
Settings no matter what I do so in the menu screen or sensor always remains in the problem except with Android as it is perfect.
Please Please help me.
Greetings Stefan