I have one problem not only with this room but with all rom for exec from orginal till this one
unlike HTC device in boutton no lock tab that allows to lock all buttons except power
and when it in my pocket it start to gives screen click that lunch many prog!!!
any whay to found this lock tab or any way to lock screen?
I'm using TJ's Atom Exec Black Manila 2D (Builtin) CE and OS 21014 with same problem
with regards
no one have same problem?
you can always use S2U2 or throttle Lock to lock your screen and bring it to standby.
Search for the program either in xda dev forum or google
what about just holding red phone (close/reject call) button for little longer (~10sec) will do the same. It's work for my HP 6815 with all roms. Also did you checked settings -> system-> key lock -> lock all buttons except power button.
Related
Hello,
now I use WM6 for a long time, but i have a big problem, the device lock.
With older builds of WM6 de device is after reset(but not every) locked and the unlock code didn't work.
so my question ist, is this problem now fixed in the new builds? I don't want to test because evertime my data deleted without a backup^^
if the problem isn't fixed, is there any alternative?!
i want to use the device lock because of the security, but wm5 isn't an alternative^^
(who have once run wm6 on his prophet, don't want to miss it^^)
i have used the search button but with no result..
thx 4 answer
Eckki
I've never had that problem. I've been using later ROM versions.
after i enter the lock code the screen makes an irritating blink then its shows the today screen, there is no problem with wm5, can this blinking problem be resolved?
Have you tried a different ROM?
all wm6 rom do the same thing, after u set a lock key, press power off to turn backlight off, then press the power button again to turn on the backlight and there's an irritating blinking of the screen try it yourself
It use to happen on my Orange WM5 ROM aswell... I'd ask a cooker to see if there's anything that can be changed...
Is it possible to change the Auto Lock Time ?
Because is little to fast for me ...
Thanks
Did you install some autolock app？ In the original rom 6.1 or 6.5 there's no auto lock service. Or you mean the auto turn off backlight?
laufine said:
Did you install some autolock app？ In the original rom 6.1 or 6.5 there's no auto lock service. Or you mean the auto turn off backlight?
Click to expand...
Click to collapse
I have installed the EnergyROM 6.5 Akeo and there are only the possibility to activate or deactivate the AutoLock but I haven't found the possibility to change the time before the autolock start and is that new reliese is to fast
Maye this is an answer.
Did you try looking in the Settings --> Lock?
There is a time setting there, and if you are looking for the screen time out, that is in ...
Settings --> System --> Power
under the Advanced Tab.
You mean the Lock with a Password and a PIN (and you MUST insetr a Passw or a PIN to activate that function) but i only need the AutoLock of the device.
Now is only 30sec. and is very very very short time !
siroftherings said:
You mean the Lock with a Password and a PIN (and you MUST insetr a Passw or a PIN to activate that function) but i only need the AutoLock of the device.
Now is only 30sec. and is very very very short time !
Click to expand...
Click to collapse
then change the power settings to turn the backlight off after 1 min instead of 30 sec
peeps said:
then change the power settings to turn the backlight off after 1 min instead of 30 sec
Click to expand...
Click to collapse
that won't change the display timeout of the lock screen. Basically, if you lock the device, once locked the device will dim and shutoff the display after 30 seconds. The OP was asking how to adjust the timeout on the lock screen. Changing the power settings have no effect on the length of the lockscreen display timeout.
HKCU\ControlPanel\Backlight\
AutoDeviceLockTimeout = xxx
xxx is how long after the screen dims that the device will auto lock. For example a decimal value of 5 will mean that 5 seconds after your backlight dims, your screen will lock.
opposite problem
My Hero would auto dim and then lock previously. I woke up this morning and it won't auto dim or lock. If I don't touch the end button the screen stays brightly lit and on whatever app was running or used last. I did not change any settings but when I went in to reset them and set it to 15 second timeout nothing has changed. Any suggestions?
Play pauses intermittently playing in short bursts as soon as screen is locked. most annoying.
Am I the only one to experiece this?
Anyone got any ideas?
I too had this problem. Playback would keep playing in spurts with major brief pauses as I walked along. The solution for me was to go into the start menu, then settings and tap on lock. Under the display tab i changed the unlock display from Windows Default (the slidey bar type) to Windows Classic.
Now i don't have any pauses from coreplayer when the phone is locked.
I also disabled the auto screen orientation change as it seemed to be that the pauses would happen when the phone tried to change orientation but the problem didn't go away until I changed the lock to classic. Before the phone was unusable as a mobile music player (unless I left the screen unlocked) - now it is only unusable as a phone due to the call quality problems.
Sorted.. thanks alot. My call quality aint great but I find it useable. another strange one is when I have the toshiba home screen on I often get the 'not enough memory' prompt, sometimes with just a couple of programs running. Ihate the guady stripey thing anyway but there does seem to be a ram issue.
Misterik said:
Am I the only one to experiece this?
Anyone got any ideas?
Click to expand...
Click to collapse
I have the same issue, but in my case I left the win default lock screen with slider. Instead, I tried to play mp3 files with windows media player (the default one) - it is working properly so far (1 day of testing while walking)
what I would like to be able to solve though is switching off the screen completely so it does not light up in the pocket waiting for me to slide for unlock...
If I press the power button, the playback stops...any suggestions please?
One way is to use psShutXP
Then try to make the divice go to Display off not power of.
Another way is to use AE Button Plus
Then assign a key function for Display off. for example you can assign double volume down for Display off.
i can do lock , standby , anything with a bt headset ...
btw coreplayer has its own option to "turn off display" look for it in the options menu , should work for you guys
souljaboy said:
i can do lock , standby , anything with a bt headset ...
btw coreplayer has its own option to "turn off display" look for it in the options menu , should work for you guys
Click to expand...
Click to collapse
this is interesting, thank you
Davidken said:
One way is to use psShutXP
Then try to make the divice go to Display off not power of.
Another way is to use AE Button Plus
Then assign a key function for Display off. for example you can assign double volume down for Display off.
Click to expand...
Click to collapse
I am going to install it anyway, thanks!
Hi. I am currently using the Energy Raphael 23566 Sense 2.5 APR 24. My screen does not respond to any touch and I can not unlock my screen. It won't sync either. The key board still seems to work as I can press function and caps lock and the lights go on. I have tried soft resetting but it just comes up with screen locked after reboot.
Any suggestions?
Starting working again.. Not sure how.
Hi
I seem to experience this problem on all HD2s. I activated the phonelock on HD2 and used a simple PIN for unlocking it. When I'm in the LockScreen, keying my PIN, the phone goes to suspend mode (or it seems like it, since the screen just blacks out and i need to press the power button again to see the lockscreen) after about 13 sec, everytime. This phenomenon happens only when phone is using battery power. It works fine when running on external power.
Is there a way disable this issue, or extend the time it blacks out. I'm using the default WM6.5 rom 1.66.707.1
Please help, Thank you.
same problem with me ! any solutions ???
settings menu all settings system power backlight
try increasing the timeout.
also settings menu all settings lock
see what options are in there. (mine won't start so i can't test it.)
I have tried all the settings i can find on the phone. I even tried changing Registry values that might be related to the timeouts. but still the same.
The screen will black out even while you are typing, so this rules out all the timers that will suspend the phone when idle for too long.
Please help, as this is a big issue for me.
Thanks.