Related
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Re: Official i-mate rom won't install after installing t-mob
jonburge said:
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Click to expand...
Click to collapse
I think you better try it using bootloader way, because t-mobile protect it's update, it happen in XDAI if you update your XDA to 4.16 and you want to go back to 4.11 then you have to update it using bootloader to be able to go back from the previous one 4.11 8) hope this help you...opps correction please there is no bootloader on XDA II, there is bootloader but in different way, I think if you copy your old nbf to sd using xdatools and go to bootloader by using power+anydirection+ reset it will ask to download the nbf to you device... hmmm if this doesn't work you have to look for another way.
T-Mobile 1.60 BUGGY Rom - Want to go back to iMate ROM
Folks,
I'm in the same position - Can someone please outline the success they've had going back from the T-Mobile 1.60 ROM to Imate ROM 1.5283??
Any thoughts would be great... (I'm guessing the boot loader using an SD card may work but would love to hear of any new tricks that people have learned on this
Cheers
Andy
I'll try to help.
Where can the ROM be downloaded, so I can have a look at it.
Jos
T-Mobile Back to iMate ROM
Thanks
I've uploaded the new iMate ROM image to:
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
The somewhat flakey T-Mobile 1.6.006 ROM (which I'm trying to get away from is at
http://www.c1au.com/iMatePDAROMS/TMobile160.zip
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
The new iMate ROM is meant to be the best bet around at the moment and my device is an iMate in the first place. The only reason why I installed the T-Mobile one was to get the Bluetooth GPS fix (which works well) - BUT so many other things aren't as stable!!
The new iMate ROM is meant to have the BT GPS fix as well.
Any help, much appreciated!
Cheers
Andy
Re: T-Mobile Back to iMate ROM
acurtis007 said:
Thanks
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
Click to expand...
Click to collapse
That's correct, you need to mod it.
I'll make a procedure for it.
Jos
THANKS!
You're a champion!
Thanks very much..
It sounds like there's a few people that'll thank you!
The other posts on the subject aren't too clear at this point - So it'll be great to clear up the issue for the iMate / XDA II.
All the best - Have a great weekend.
Andy
OK, made some time to create a batch file to upgrade.
Works only for upgrade from T-Mobile 1.60.06 NL to I-mate 1.53.82.
1. Download the ROM image ruu15283.zip from the site in this posting
2. Unzip the file with Winzip
3. You now get a file called ruu15283wwwe_cdl.exe
3. Extract this file with Winzip to a new folder
4. Extract the attached file to the same folder
5. Start the conversion and upgrade by double-clicking convert.bat
Since I'm out till Sunday, I can't check my mail to respond to problems.
Enjoy!
Can the first person brave enough to try this please confirm success.
IT WORKS!!
Jes - You're a scholar and a gentleman!!
And a *(&(&( good programmer
IT WORKED!
Thanks a million!
Let me know how to send you virtual beers or whatever
(or if you need a hand with anything - Please let me know!)
Cheers
Andy
Nah, I'm not a good programmer, I just know how to write bachfiles and how to combine things to get the disered result.
Thanks has to go to Isme. He knows a lot about the internal working of the XDA II, the ROMS and the bootloader process.
He wrote the great tool used to change the file headers, so you can update your machine with a ROM of a different brand.
He's a good programmer!
If somebody needs a mod to upgrade from another ROM version, please let me know.
And if you want to do something back, please donate to the people who keep this nice forum up and running.
It worked. For those who want to get back onto the official path from unofficial t-mobile this is an automated way to do it. Thanks...Jon
Backing Up XDA2 ROM+CE
I'm a new XDA2 iMate user, want to back up my ROM+CE before I screw things up. I did this on my XDA1 (power + software reset, then press contact button I think). Anyway, I always had my ROM+CE backed up to a 64M SD card ... just in case.
I've searched these forums for such a procedure for XDA2 ... no luck.
What is the process, if any, to backup the XDA2's ROM+CE image to SD card?
Appreciate any help,
Craig
I think it's possible with the xda2dmp tool, but you better ask Itsme, he wrote it.
You can find it on this site: http://www.xs4all.nl/~itsme/projects/xda/xda-ii.html
PHoto contacts wont work
I have an imate and i just upgraded it with the new rom, but now i have a problem that the photo contacts wont work... Is there a way i can downgrade to an older version of rom. I use to rely alot on the photo contacts.. anyone else have the same problem?? thank you
Installing i-mate ROM after T-Mobile's
Gentlemen ,
I did the same (install T-mobile ROM on an imate ) and I want to install the imate ROM update. I am not sure about the T-mobile ROM , but when I boot it displays the following :
R 1.06.01
G 1337.16
D 1.60.00WWE
Kindly advsie if the above mentioned patch work in my case .
Appreciate you kind advice !
Thanks!
Should work.
Just try it out. If it's not ok, you get country error when you try to upgrade.
Jos
Hi Jos ,
I tried it and it WORKS!!!!!!!!!! You are a brilliant guy !!!
I owe you one!!
My friend wants to install the T-Mobile Update because the windows CE version on the T-mobile ROM is newer than that of the imate. Any magic patches that can be done.
Note -> Please tell me of how can I be of any help to you in return for your support
All the best
If you want to do something back, please donate to this forum to keep it up and running without advertisements or banners (just click Donate Money on top of this page).
This is how to upgrade:
Works only for upgrade from i-mate to T-Mobile 1.60.06 NL.
1. Download the T-Mobile ROM image from http://www.xda-developers.com/incoming/rom160wwe/
2. Extract this file with Winzip to a new folder
3. Extract the attached file to the same folder
4. Start the conversion and upgrade by double-clicking convert.bat
Let me know if it works.
Grtz,
Jos
Difference between i-mate 1.52.00WWE ROM and i-mate 1.53.82
Can anybody outline the differences between the 1.52.00 and the 1.53.82 official i-mate ROMs?
I'm trying to ascertain whether I have sufficient incentive to upgrade (given the "If it ain't broke, don't fix it" mentality I subscribe to in my old age!).
Sufficient incentive might be;
:arrow: Faster GPRS
:arrow: Improved battery life
:arrow: Improved all-round performance.
Thanks guys.
Codenix
Just upgraded to i-mate from much-loved XDA!
Hi all,
First post here - I've been lurking for a while now.
Is there a "best" wm6 ROM for the O2 XDA Mini S Please?
I'm a bit confused by the names of the ROMs
I have:
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 2.21.4.1
Should I use shelltool to flash?
Many thanks
NTB
8o)
Yes you should cuz you have a G4 device..
you can see here whats best rom for your wizard
http://forum.xda-developers.com/showthread.php?t=295777
Thanks for the reply. Can you tell me which one is closest to "standard" please? I just want to try wm6 out and maybe try one one of the tweaked versions later.
Thanks
I've just installed 'Windows Mobile Crossbow Most Beautiful Edition' on my XDA, Much better than the standard O2 Rom and pretty standard looking imo, has some nice extras thrown in but overall pretty clean. My IPL/SPL are identical to yours. Just use Shelltool and you'll be fine.
Dont worry if it doesnt work first time, it shouldnt cause any problems to just reflash it. Worse comes to worse you can always flash back to the O2 rom, although I wouldnt recommend it, Wizard Love rom is quite nice.
Find download links for Windows Mobile Crossbow Most Beautiful Edition and Wizard Love that they mention in the Shelltool thread, then you're set even if you have a mishap.
I did mine over the weekend, same IPL/SPL/Radio as you. I flashed with PdaViet4 using the Shelltools method.
WM6 Most Beautiful ROM
Firstly, great site and a veritable mine of information, almost too much. A quick question since I'm kinda a newbie.
I currently have an unlocked G4 XDA Mini S, with Wizard Love on it. I'd like to try WM6 and Most Beautiful as most folks recommend it. I tried flashing it last night using the shell tool, but I was unsuccessful. So I was just wondering, can I just install Most Beautiful directly or do I have to use the shell tool? I think I have the new ROM update installer (is there a way I can check this?) and I'd like to try it directly.
Thanks for your advice.
I got it to work anyway, using the shell tool. I just removed the miniSD card and turned off the radio (ooops, should have done that before!) and hey presto. It's on and looks great.
No phonepad text entry method though . Must see if I can add it...
ntblade said:
Thanks for the reply. Can you tell me which one is closest to "standard" please? I just want to try wm6 out and maybe try one one of the tweaked versions later.
Thanks
Click to expand...
Click to collapse
tell me which radio version do u want to use?whats ur ipl&spl?did ur device is cid unlocked?which rom do u wnt to use? give me the details i'll make for u?
where can i dnld wm6 for xda min s - G4?
[where can I download it ?
Please advise me
Thanks
KArimsha
WM6 Most Beautiful Edition for G4 DnLd?
Ive been searching for arround a couple of months for this WM6 for O2 xda Mini S (G4) and I failed to reach a link or a file , Please if any of those who download it can guide me I would be greatful , Pls send me on [email protected]
Thanx a million
Karimsha
ohhhhhhhh
shell toll mthod its damadge the phone i make it but it stuck on o2
I have a Orange SPV M600 which I'm sure is a G4.
IPL 2.10.001
SPl 2.10.001
GSM 02.07.20
OS 2.10.1.22
This was my first attempt at trying to change it using the following Rom:
JAMin_WWE_ 2130923_21309112_020720_ship
I have searched and searched not only this web site but all over the web and can't find the answer to this error, can anyone help or point me in the right directionplease.
try another ROM with NovendorID
ady_uaic said:
try another ROM with NovendorID
Click to expand...
Click to collapse
Ok not 100% sure what you mean but am learning all the time and will try a search for it.
Having searched this is what I have found;
ROMUpdateUtility-NoVendorID.zip
[email protected]/Prophet/Tools/
RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar ftp://[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Not sure if the above will give me a French (FRE) version or what to do with the ROMUpdateUtility-NoVendor ?
Not wanting to let the grass grow under my feet!
I tried the RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_No VendorID and bingo got a French Qtek version.
Then did a bit more research about the ROMUpdateUtility-NoVendorID as my French is not up to scratch, but hey would have been a good way to learn it, me thinks not!
Anyway found a thread about using the ROMUpdateUtility-NoVendorID and tried it with various different Jamin rom's and am now stuck with the rainbow screen as it stops as 95/96% with an 326 Error!
Oh Joy!
Tried searching for this problem and it seems most treads have died!
Please can anyone help?
so3: try upgrading radio.
Sorry could you explain more please?
there you go:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
use search next time.
Ok? Being a new person on this what will that do?
Allow be to update the device with any roms?
it should help to get the device back to life, flash the radio, then flash official rom once again.
Ok, having found the time to do this, I think I have mucked this up - ish!
I tired found the RRU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_SHIP-NoVendprID.ZIP!
I also downloaded the Prophet_G3_G4_RadioRom_V2.69.21 because it seems the date 07/04/2007 was the lasted?
So I tried the above RRU_Phophet... and that worked fine, so I tried the RadioRom next and that worked ok. But because I wanted the ruu_JAMin_213923_2139122_022021_noskype_wwe_ship.exe Rom which I had downloaded it comes up with a Upgrade problem?
I am fairly happy with what I have done as it seem better than the Orange software!
The only problem I have at the moment is the loss of the Screen rotation Icon on the lower toolbar, which I will try and search for else where.
Hello!
I'm very unsure how I can update my G4 CID looked.
1. Which updateway is recommendable?
2. Can I use all Prophet Roms?
greetz Ben
Can everybody help me please?
I'm still waiting for an answer!
look in the xda-wiki ... you found the right discription.
Not Realy! I have read the wiki and all usefull threads 2 days before!
1. There are different updateways in different foren, threads and wikis and all are for G3. Some users, which have a G4 model write that you have to notice a few points, but the answers are not very clearly.
2. In the german XDA forum they tell me that I can use every prophet rom! BUT: In the wiki is written that the G3 and G4 devices have different hardware! So it is very illegitimate that I can use the same rom!
Please help me! In my statement you can see that I'm very careful because I don't want to brick it!
no you haven't,as i see !
Do you think that I'm lying? Maybe I'm blind or stupid!
1. I don't want that you tell me the updateway. A link to the tutorial which you use / would use will be ok!
2. I can see that you has a normal prophet rom. So I think that the answer is YES?
I've got the same problem. This forum is great, no doubt, but it's a MESS. I couldn't find a clear answer regarding flashing a CID LOCKED G4 Prophet.
Can I flash radio roms ? What about extrom ? Can I just flash Gullums Touch VII right away after flashing NVID rom from here http://forum.xda-developers.com/showthread.php?t=310452 ? Can I even flash this NVID rom to CID LOCKED G4 ?
Lots of questions and for every one I can find 20 different answers, so I'm pretty confused. Maybe someone with the patience can clarify all of that, we don't want to brick our precious Prophets.
Juhuu! A further confused man!
So let's collect our incomplete knowledge together!
I read about a tool, shelltool with it you can update a CID locked device!
http://forum.xda-developers.com/showthread.php?t=293480
I'm reading the full thread at the moment!
My rom question is still open! If I find an answer I update my device with the shelltool!
greetz Ben
OK i see your Problem!
You can Flash all Roms with the NVID Flashtool. You can only Flash Roms with this tool, if no IPL and SPL is included! WM6 Roms use too ways to Flash it. Read the Threads about this WM6 Roms ... you need only to start the Update.bat or simulare bat file ... possible a NVID Flashtool. Some Roms have two bat files for G3 or G4 Device. Use the right! Radio Roms use everytime the NVID Flashtool and work everytime with locked devices.
You dont need the Shelltool way ... this is more Hardcore for develope.
Tank you very much for your answer!
In fact:
-I can flash every prophet rom which has a G4 bat?!
-I can flash every prophet Rom which has no IPL, SPL with NVID flashtool?
My G4 runs WM6 now!
After again 5 hours investigation I know that you CAN'T kill your device with the prophet roms! When all people say "the device is bricked" they don't mean that nothing happens! They say "bricked" if the ppc stuck on the SPL/ISP screen or the bootloader. And both can be fixed with a RUU update like Prophet_PV_Temp or the original O2 rom!
Frtzrwk:
I upgraded to PDAVIET Touch 4.0.0.6!
You can get the link to both RARs in the thread.
First: Prophet_PV_Temp
For Up/Downgrading to Aku 2.2 (WM5)
Second: PV_4.0.0.0.6_Touch
The Real WM6 Rom
-Download and extract!
-Start "ROMUpdateUtility_NV_G4", which install Aku2.2
#wait 10 minutes, your ppc restart automatically
-After the PPC is fully started, you install first "Cert_SPCS" and then "EnableRapi" (you can find the two files in PV_4.0.0.0.6_Touch)
#wait 1 minute and restart your device
-Now you can update your Rom with "Upgrade_Rom"
#wait ~15 minutes
-Hardreset your device! IMPORTANT!!!
Welcome to your new WM6 installation!
If your device stuck at the ISP/SPL screen (loading more than ~5 minutes), go into bootloader (camera + reset) and start again with upgrading to Aku2.2
greetz Benne
This was all in the wiki
See http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
then
WM6 Upgrade Guide
http://forum.xda-developers.com/showpost.php?p=1296235&postcount=1
And your device can go to heaven when your flashing the wrong rom to a wrong device...
The answer was for Frtzrwk because he is confused too!
So shut the **** up...
I don't think so! Were is written in the f**k wiki that I can use ALL prophet roms!
There is olny one information about G4:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
So the hardware is not the same!
And by the way: I hate rapidshare... test the links!
And when everybody flash a trium rom or another **** rom they shouldn't buy a PPC!
I don't care!
friendly greetz Ben!
P.S. Many thanks to NetrunnerAT for the only usefull answer in this thread and to gullum for his fileservice + great rom!
yes
ok new menber
Ihave o2 mini uprom die
What? I can't understand you!
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....