I have a Orange SPV M600 which I'm sure is a G4.
IPL 2.10.001
SPl 2.10.001
GSM 02.07.20
OS 2.10.1.22
This was my first attempt at trying to change it using the following Rom:
JAMin_WWE_ 2130923_21309112_020720_ship
I have searched and searched not only this web site but all over the web and can't find the answer to this error, can anyone help or point me in the right directionplease.
try another ROM with NovendorID
ady_uaic said:
try another ROM with NovendorID
Click to expand...
Click to collapse
Ok not 100% sure what you mean but am learning all the time and will try a search for it.
Having searched this is what I have found;
ROMUpdateUtility-NoVendorID.zip
[email protected]/Prophet/Tools/
RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_NoVendorID.rar ftp://[email protected]/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/
Not sure if the above will give me a French (FRE) version or what to do with the ROMUpdateUtility-NoVendor ?
Not wanting to let the grass grow under my feet!
I tried the RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship_No VendorID and bingo got a French Qtek version.
Then did a bit more research about the ROMUpdateUtility-NoVendorID as my French is not up to scratch, but hey would have been a good way to learn it, me thinks not!
Anyway found a thread about using the ROMUpdateUtility-NoVendorID and tried it with various different Jamin rom's and am now stuck with the rainbow screen as it stops as 95/96% with an 326 Error!
Oh Joy!
Tried searching for this problem and it seems most treads have died!
Please can anyone help?
so3: try upgrading radio.
Sorry could you explain more please?
there you go:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Radio_1_Upgrade
use search next time.
Ok? Being a new person on this what will that do?
Allow be to update the device with any roms?
it should help to get the device back to life, flash the radio, then flash official rom once again.
Ok, having found the time to do this, I think I have mucked this up - ish!
I tired found the RRU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_SHIP-NoVendprID.ZIP!
I also downloaded the Prophet_G3_G4_RadioRom_V2.69.21 because it seems the date 07/04/2007 was the lasted?
So I tried the above RRU_Phophet... and that worked fine, so I tried the RadioRom next and that worked ok. But because I wanted the ruu_JAMin_213923_2139122_022021_noskype_wwe_ship.exe Rom which I had downloaded it comes up with a Upgrade problem?
I am fairly happy with what I have done as it seem better than the Orange software!
The only problem I have at the moment is the loss of the Screen rotation Icon on the lower toolbar, which I will try and search for else where.
Related
I downloaded this rom from the iMate site.
Uploaded it on our FTP server
Have fun
198 views
58 downloads
0 replies!
no thanks guys
Fianlly a reply
I downloaded from the Imate site and have not had any issues yet. Will not have a chance to play with the new load till this weekend.
Dustoff
I also upgraded from club imate site, no issues so far looks good.
Hi, I make the upgrade.
It works fine.
The only problem is extended rom is locked.
Thanks Panja for uploading.
JoseF
the only difference with this version seems to be the removal of the text 'test only not for sale' in the bootsplash screen.
1.72 Upgrade
Thanks Panja for uploading the 1.72 rom. I just upgraded mine and it just took me an hour and nearly same time for adding some software. XDAII working fine. No Problems. Yet.
Cheers 8)
I'm going to try now, keep my fingers crossed!!
Thnx for posting Panja
tryed
It doesn't work,... wrong country error???
Panja said:
I downloaded this rom from the iMate site.
Uploaded it on our FTP server
Have fun
Click to expand...
Click to collapse
Installed, tested, all OK, looks very good, and better than the 1.66 ITA. witch have had problem with TOMTOM navigator, and with the new 1.72 goes all very very WELL!
Thanks for the upload!
Galactus said:
I'm going to try now, keep my fingers crossed!!
Thnx for posting Panja
tryed
It doesn't work,... wrong country error???
Click to expand...
Click to collapse
Hey,
Try to understand this page and you will get it to work:
http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
Wow
Wow
A bit too much information for me I'm afraid.
I'm running the Imate version now and it's terrible: No gprs & monitor.
I've tried already to switch back to the original version from T-mobile, but I get the same country ID error as when I tried to install the Imate ROM.
To reverse this (as far as I understand) is not easily done I'm afraid!
The settings of the T-mobile ROM (RUU16036WWE_T-Mobile_NL.exe)
look correct if I vieuw the
ms_.nbf & NK.nbf & Radio_.nbf files with ER2003 EDIT
and there seems no reason to change them.
The terrible thing is that I can not install this original ROM !
Please help.. :wink:
Re: Wow
Galactus said:
Wow
ms_.nbf & NK.nbf & Radio_.nbf files with ER2003 EDIT
and there seems no reason to change them.
The terrible thing is that I can not install this original ROM !
Please help.. :wink:[/quote
Use ER2003edit to erase the phone ID and the county code. then apply your old update and you will be going. This worked for me to downgrade.
Click to expand...
Click to collapse
Panja, thanks for this .
I have just downloaded onto my XDAII and seems to be running happily.
Christian
christianj said:
Panja, thanks for this .
I have just downloaded onto my XDAII and seems to be running happily.
Christian
Click to expand...
Click to collapse
No problem.
Cheers
Panja
Phone is not ready
Does anyone come across such problem wtih this iMate 1.72.00WWE, that is when activate the phone program, select Tools --> Options..., a dialog comes up with message "The phone is not ready, Wait 15 seconds and try again." However, this never get away, every I select the same, it appears. Please Help.
So far, ive done 2 hardresets on 1.72.
Compared to 1 on 1.66 and 1 on 1.52.
Im really concerned about the stability of 1.72, doing the wrong thing with the wrong program can cause an instant hardreset!
I think I solve the problem now
umm... i cant upgrade.
ive tried about everything, and i always get country ID error.
Ive upgraded to 1.72 before (official), back then i erased the phone ID and
operator code.
So, i tought.. then it should be the same now.. but no, it aint.
I cant upgrade!!
Please help!
Just do it all over again, as you never upgrade the machine. I had do it, it works.
Yeah.. it worked with PH10, Qtek, and WWE.
thanx for the input!
My T mobile branded Vario II fell off my lap yesterday (in its case) Theres not a scratch on it and its only 4months old. Later on i had loads of missed calls and then realised it wont ring or vibrate or play mp3's.
Im currently running one of HTC's Roms, SPL-1.09 is my bootloader and im not sure how to reflash with the original T-mobile rom before i head back to the shop to see about a replacement
I keep getting a invalid vendor id, and from reading posts on the forums i know i need to do something with the cid so i can flash back down to the original rom.But im getting confused between a super cid and a cid? as what ive found below just mentions cid and not super cid.
Is this the file i need? HTC_Hermes_SIM_CID_Unlock_v3a ? i just run the .bat file then install the orginal t mobile rom as normal?
What im basically asking is the above right to ahead with? as i just need some reassurance as if i cant blag one under warranty then ill have to use my insurance which as its my second claim in 6 months has a excess of £60
Yes i have looked on the forums for hours but cant see any info.
Thanks in advance should anyone help
EDIT well ive run the unlocker and supercid'd it but it still wont let me flash with the original t mobile rom?
ERROR:260 Update Error
im getting the above error?
Is all I will say is click on the mrvanx guide in my signature.
Gavin01 said:
My T mobile branded Vario II fell off my lap yesterday (in its case) Theres not a scratch on it and its only 4months old. Later on i had loads of missed calls and then realised it wont ring or vibrate or play mp3's.
Im currently running one of HTC's Roms, SPL-1.09 is my bootloader and im not sure how to reflash with the original T-mobile rom before i head back to the shop to see about a replacement
I keep getting a invalid vendor id, and from reading posts on the forums i know i need to do something with the cid so i can flash back down to the original rom.But im getting confused between a super cid and a cid? as what ive found below just mentions cid and not super cid.
Is this the file i need? HTC_Hermes_SIM_CID_Unlock_v3a ? i just run the .bat file then install the orginal t mobile rom as normal?
What im basically asking is the above right to ahead with? as i just need some reassurance as if i cant blag one under warranty then ill have to use my insurance which as its my second claim in 6 months has a excess of £60
Yes i have looked on the forums for hours but cant see any info.
Thanks in advance should anyone help
EDIT well ive run the unlocker and supercid'd it but it still wont let me flash with the original t mobile rom?
ERROR:260 Update Error
im getting the above error?
Click to expand...
Click to collapse
Hi!
if u have aRom in your device i think the link below gona helps
GOOD LUCK
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=26
thanks guys i will try the above. if not i think ill "loose" the phone
Hi Gavin01,
Good luck with the downgrade - I'd be interested to know how it goes. I also have a T-Mobile MDA Vario II, and so far I've put HardSPL 7 and Radio ROM 1.41 onto it. I'm just trying to decide which WM6 ROM I want to try out
Anyway, I have at the back of my mind that I don't really know how to downgrade it in the case of a warranty claim. The MrVanx guide to downgrading WM5 looks ok, but I'd love to know how to put the radio rom back (I guess this would just be the reverse of the upgrade), but then finally taking taking HardSPL off. In fact I'd vote for a guide on it - would write it myself but I have to confess I'm rather a newbie to the world of HTC upgrades....
Cheers,
sparky
I have the same problem
I´d like to downgrade to original softbank settings. But they only accept warranty issues if you have the original cid? , right?
So putting the old rom back on is not my problem, "un-super-cid" it is.
I need help please too
Hello,
please excuse, but i have a question and i will not open a new threat.
I use tytn. I have installed the Radio Version 1.40 and the Black 3.01 Rom. I have used HardSPL and when i go into the bootloader i have Herm200 IPL 1.04 and Herm200 SPL 2.10 OliPro. My question is: it is not possible to go back to wm5 with the installer RUU Hermes 1.18....-Qtek_Ger_Ship. Because in this installer is a Radio Rom. When i will use it, i lost my Radio and i have No GSM. The only way to go back is with MrVanx Hermes downgrade guide. Is this correctness ??
( This is what i think after using the help-function and the wiki )
When this is right, so Please Please, can a specialist please build a litte .exe-File so that i can make a downgrade to my mw5? Sorry, i am not idle, i am not able to to this. And please excuse my english. I will say say thank you very very much for your helping. With the best regards from Berlin say Christian
Hello everyone,
Please I have a very big problem that I would like someone to help me. I have a Dopod CHT 9000 which is Chinese language or ROM. I would like someone to give me direct link to where I can download WWE ROM to upgrade it?
Also I would like to know if I can upgrade it with Cingular 8525 WWE ROM? Please mods I need your help.
Thanks in advance.
All the official ROM's were removed from this forum on the insistence of M$ - I don't even know if we are allowed to post links to these roms, so maybe no one can openly help.
But more to the point, since Feb this year you have had:
MDA Vario II - you want to sim unlock.
Qtek 8100 - you want to sim unlock.
XDA Wiza 200 ? - You want to change language from German to English.
2 x SPV C600 - You want to sim unlock.
Dopod CHT 9000 - You want to upgrade Chinese rom to WWE rom.
Either you are absolutely useless with phones, or dealing in them (either way is no problem) - BUT with so many phones with similar 'problems' I'd have thought it more appropriate that you learn how to do some of the work yourself - try to RTFW instead of your 'Urgent' posts.
babyelephantt said:
Hello everyone,
Please I have a very big problem that I would like someone to help me. I have a Dopod CHT 9000 which is Chinese language or ROM. I would like someone to give me direct link to where I can download WWE ROM to upgrade it?
Also I would like to know if I can upgrade it with Cingular 8525 WWE ROM? Please mods I need your help.
Thanks in advance.
Click to expand...
Click to collapse
@ach2 nice work my dear watson
@babyelephantt
read the wiki all the ROMs are in there, and if you have indeed upgraded/possesed so many device...why are you asking this?? you REALLY should know by now that "please help me!" is not a good way to ask for help.
I also stand corrected - I thought these Roms had been removed so didn't even bother looking
The link to the WWE roms is here: http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades Scroll to the right to find the download mirrors
mrvanx said:
@ach2 nice work my dear watson
@babyelephantt
read the wiki all the ROMs are in there, and if you have indeed upgraded/possesed so many device...why are you asking this?? you REALLY should know by now that "please help me!" is not a good way to ask for help.
Click to expand...
Click to collapse
Thanks
mrvanx said:
@ach2 nice work my dear watson
@babyelephantt
read the wiki all the ROMs are in there, and if you have indeed upgraded/possesed so many device...why are you asking this?? you REALLY should know by now that "please help me!" is not a good way to ask for help.
Click to expand...
Click to collapse
I have found an English ROM for it. [Dopod Asia WWE UNI_DopodAsia_11369_183_10402_ship.exe and CHT_ENG.exe] which one can I use to upgrade the ROM?
No one can tell you which rom to use - any should work. Just try them and see if you like them. I've tried all the Dopod WWE roms on my vodafone VPA1605 with no problem (before WM6 came out).
Try also reading mrvanx's guide - it's in his signature in post no. 3 of this thread
Thanks
ach2 said:
No one can tell you which rom to use - any should work. Just try them and see if you like them. I've tried all the Dopod WWE roms on my vodafone VPA1605 with no problem (before WM6 came out).
Try also reading mrvanx's guide - it's in his signature in post no. 3 of this thread
Click to expand...
Click to collapse
I have just tried upgrading it with the two ROMS but it gives me ERROR [294]: INVALID VENDER ID and Country ID error respectively. What do I do to rectify it please.
babyelephantt said:
I have just tried upgrading it with the two ROMS but it gives me ERROR [294]: INVALID VENDER ID and Country ID error respectively. What do I do to rectify it please.
Click to expand...
Click to collapse
You REALLY need to read through the wiki, all the info you need is in there, you obviously havent taken any time to read through it. This thread will be closed now.
everything you need is in the wiki. i suggest you read it to avoid trashing your phone.
thread closed
Hi,
I have flashed ROM of my VPA compact III successfully, from WM5 to WM6 Professional with great help from this excellent forum, but now I do not succeed to change the splashscreen.
I have tried a some times but there are same problem of bootloader.
The .exe that I had tried generates same error of ROM update.
Where I can find a .exe that work on boot 1.09?
Thanks a lot and congratulations for job.
here you go
I am not trying to flame, just a little advise - Check out Mr. Vanx's guides like people suggest . . .
Here's the link - http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=20&Itemid=27
remember - google, forum search, hard spl, mr vanx; that should solve any question!
tytn_adry said:
Hi,
I have flashed ROM of my VPA compact III successfully, from WM5 to WM6 Professional with great help from this excellent forum, but now I do not succeed to change the splashscreen.
I have tried a some times but there are same problem of bootloader.
The .exe that I had tried generates same error of ROM update.
Where I can find a .exe that work on boot 1.09?
Thanks a lot and congratulations for job.
Click to expand...
Click to collapse
This is what I've used since trying out Black Satin (great ROM but wanted to change splashscreens).
Naturally, even though I used it fine, I recommend that nobody uses it and certify it's bound to turn anyone else's phone but mine into a brick.
Welcomehead file goes in Windows.
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....