m having problm with o2atom.i canyt turn on wirless it sayz radio is not attached
and wen i go to device info.
there i see imei not ready
radio rom not ready
i reset but still same
wot could b problm???
is that software or hardware
br falak
Radio problem
Have you tried after hard reset? If so please try to reinstall the original ROM image. can be downloaded from the below link:
http://rapidshare.com/files/43782534/Xda-Atom-ENG-20060426-MOT0822.exe
i already try this but phone hangs on radio burn and do nothing
wot to do???
plz help me
br falak
In this case it isdue to hardware problem.
Need to send the phone to service center
after upgrade it stuck on radio burn and now in boot mode
i can see only upgrade on secreen
wot to do now?
br falak
try go to O2 web site and download the most stable ROM first. If you have already upgrade your O2 to one of the 2.2+ versions, the bootloader had been changed. you need to check previos post for downgrading. Most probably you will need the existing ROM (Run.exe and the Upgrade*.exe with the .nb0, the bootloader), and the old Radio ROM from O2.
Related
Hi ,
I had 1.72.00wwe on my phone but i was tryin 2 upgrade it further but it got stuck while upgrading and its showing seril while not on cradle and while on cradle its showing usb 1.06
plz hlp me iam newbee and not good in programmin .I also have asecond Xda2 with 1.66.00wwe plz tell if it can b of any help
Reset your device, place it in the cradle and re-run the upgrade.
thanx i tried it already from 2 computers in one its showing error 103 no rom image found and in another its showing error 101 country code problem
Which ROM are you attempting to upgrade to? Which one exactly had you previously upgrade to? What operator do you use?
I'm asking all this to try and get a better picture. Normally, people in your situation can recover by applying the same upgrade again, or, at worst, re-applying the one they are upgrading from.
Make sure you are in bootloader mode (by pressing Jog button and Power button at the same time as pressing reset) before retrying any upgrade. Also make sure the USB cradle is plugged directly into a USB port on your PC and not through a hub and that the power supply is connected to the cradle. It may help to make sure that Activesync isn't running also.
active sync
in the active sync tray it shows that not connected
Well i had 1.72.00wwe rom image 1.14 earlier and iwas tryiong to upgrade to 1.72. something can't remember exactly but it was with rom image 1.17 it was downloaded from t mobile and my current phone is from o2
Click to expand...
Click to collapse
Activesync is not needed for upgrades. The upgrade process looks after its own connection. I suggest you follow the procedures in my post here to overcome the Country ID error problem. You will need to know what the device's operator and language IDs are currently set to, which is why I asked you above. I suspect you won't have Devicedata.txt, so it becomes necessary to know what operator and language the previous upgrade was.
to revive your XDA2 again
The main point is what is ROM 1.66 come from (e.g. i-mate ot T-mobile)
If you doesn't upgrade 1.66 ROM by yourself or it came from factory ,you must tell us which operator did you buy from.
If you try upgrade across operator ,it will hang on boot loader screen.
And again, which 1.72 ROM did you try to upgrade from?
I upgraded a TMobile XDA1 got the main ROM upgrade then went and tried to upgrade the radio stack. As I see from the many posts a bad thing to do. But this leaves me with a broken unit. The radio was T310. I can not see how I can solve this problem. I have an SD card, I have a friends German unit with an ENG Rom and the orignal radio which I will leave alone. How can I fix mine?
Thanks
GSM error on Bootload 1.50
Looks pretty much the same as my problem. By pressing the joystick after the error message, I get one step further, but no contact or upload of the ROM. I hope some wise person can supply an answer, :roll:
I have the same problem...
XDA O2 on Wallaby BootLoader v5.15 I see the error : "GSM ERROR"
my pda don´t start good I only see the rom version (3.17.03) and a blue wallpaper of O2..
I already update my rom but it don´t work yet !
Where can I find a GSM rom update? I'm from Portugal
What more can I do ?
Please, help me !
thanks
Joao Afonso, from Portugal
GSM Error
I have tried a number of solutions. None seem to work. If someone has the GSM rom and a solution to upload it let us know. I have tried coping a new radio version to the windows dir on the PPC, this fails. I have removed the back cover and battery again this does not work. The only alternative is to send it back for repair (expensive) or get a new one. I have looked at the solutions in the forum area and on the web but can not find an answer. The unit is an old TMobile (GERMAN) Xda. Upgraded the OS OK then messed up the radio. So as I say let me know if someone has a proven solution. Thanks.
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
GSM Error
Many thanks for the information. I have tried this but to sorry to say this does not work for me. I can get the RSUgrade.exe to load on the PDA, it stops at 1% and then hangs. The XDA was a TMobile GER unit with 32Mb. I have two units the same, I attempted to upgrade the radio on one and it failed at 10% rebooted and hung with GSM error. Since then I am at a loss as to the next step apart from throwing it in the bin.
same here
it always promt me failed flash device restart press ok. wat the hell is dis . does my gsm rom id basted?day i cant upgrde it tnx
Same problem..
.. and no solution for the GSM Error. There is no possibility to get a connect (O2 germany) and the RSU-Utility stops after 1% - always.
Please help!
Have you tried leaving it for 24 hours with the 1% on screen?
Flash failed
The problem is that there is a message "Flash failed - press ok to restart."
No possibility to leave the program..
same w u
ya i wish someone can find any sol 4 our prob. same problem w u guys.
my himalya automatically rose frm dead..but it was Jus showin the splash Screen..so i decided it Flash it
i put it into the bootloader mode n started flashing
but i encountered a Error during upgrading the radio ROm
This is wat i saw in the RUULlog.log file
18:21:55 Connection with USB
18:22:29 Begin Stage 4
18:22:59 Radio Erase retry 1
18:23:29 Radio Erase retry 2
18:23:59 Radio Erase retry 3
now there is a splash screen n there it shows 'NO GSM' but i ttried flashing wit a Differnt rom but no Luck please Help me
Please help me my himalaya is dead since more than a week
you may send more info
like what rom was befoure and what rom are you trying to put in
with that i can try to help a litle bit
hope never dies just me......
Re: you may send more info
rictec said:
like what rom was befoure and what rom are you trying to put in
with that i can try to help a litle bit
hope never dies just me......
Click to expand...
Click to collapse
my himalaya was on original rom ..then i tried installing 1.66 version i also tried wm2005 but no differnce .. the radio version cudnt b eearased ..it was givin me an error as Quoted above..i guess i hve to give it to the service center only (
hi all,
i have recieved a hermes with boot loader screen (tri color) when i try to switch it on it goes directly to 2 color screen doesnt go further at all. I've read the sticky thread . As the phone which i have shows on screen the following
HERM100
IPL-1.04
HERM100
SPL-1.40. Olipro
thats it nothing else exept tri color screen so read the sticky threadabout how to unbrick hermes and did following options when i flashed tmobile uk rom it goes further but it stucks at 11% and doesnt go further and when i try to flash a rom which has 1.04 (528420-ruu_hermes_1[1].18.255.3_1.18.255.108_1.03.03.10_qtek_wwe_ship) but it doesnt do anything with phone, it cant even detect the phone and give error straight away can anyone please guide me what should i do further to alive this phone
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
hi no reply but 53 views any mod plz help
WHaT YOU MEAN?
by:
UPDATE - To easily unbrick type 2b (on T-mobile UK) - please flash with wm6 test from t-mobile @ http://forum.xda-developers.com/showthread.php?t=322905
SPL HTC_BOOT Boot OS? No GSM? KITL Diagnostic Solution
1.04 Any No No --- Bricked while flashing OS, radio intact Flash any shipped ROM with bootloader 1.04 on it 2 times (1.04 bug)
---I think your hermes is bricked if you cant upgrade even a stock rom is bricked dude...
For the last thing you could do about it... flash a stock rom like ATT stripped you can find it on the WM6 subforum here on hermes forums... all the chefs put in the main post the link to it... if it doesnt works so... you are screwed up...
be sure ahave this:
Battery at 100% at least 60%
XP pc not vista not wm7 ok?
A nice usb cable and nice USB ports too on the XP pc
Dont run anything till it finish and... dont flash with SIM card and microSD inserted.
Go ahead and post your results again.
hi thanks for your reply i have tried these 2 following roms
HTC_TyTN_WWE_3[1].54.255.3_6275_1.48.00.10_108 (stucks at 12%)
RUU_Hermes_CINGULAR_WWE_3[1].62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship (stucks at 11%)
with these its not really working anyother thing which u think i should do
br
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
mmmm
Sounds like your batt is almost dead... maybe it shows... 70% but drains to fast is lying to you... or your cable is broken somewhere...
you can DL the stock stripped here
http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
ultramag69 said:
Sounds like the radio rom is corrupted. Flash a Stripped Stock rom (no radio) . This should get you back up and running windows but it doesn't look good to get the phone running again...
Click to expand...
Click to collapse
yes u r right mate my phones radio rom was corrupted and thanks to + Que PPC for providing help and link of the official AT&T WM6 striped rom which turned my phone back to normal but the problem is when i went to device information it says like this
ROM version: 3.62.502.3
ROM date: 10/11/07
Radio version:
Protocol Version:
so radio and protocol versions are blank nothing is there so can u please tell me wt should i do to solve this or its not solvable at all thank you very much indeed to you guys. I really appreciate it
br Sherry
Not solvable... You might like to try running your SHIPPED STOCK Radio Rom, if you know what it is, but there isn't much hope of recovery once the radio goes... Look at it this way, couldn't hurt....
I tried to put android software on my htc hd2 that i just got and all i keep getting is the MAGDLR screen and i cant even use the phone anymore what do i do please help i need it bad can anyone help?
Ok calm down and tell me exactly everything uou have sone so I know at what point you are and what you need to do next.
pls i have the same problem myine is stuck in d malgdr screen and nothing is happening i have tried installing stock rom RUU_leor_s_htc_3.14.405.2 radio and leoruu_leo_s_htc 2.15. bt it keeps telling me update error pls help
Then that isn't the correct stock rom. Can't just use any stock.
If you have a tmous you just came a hairs width from bricking it. Get your rom from T-Mobile.Com and flash it, USB via bootloader is fine, or SD if you prefer.
If you have a regular hd2, then it must be branded, example o2 phones will only accept o2 branded stock roms, go to HTC.com, pick your phones country, and search support section for a rom it allows you to download using your phones serial. If it wont accept the serial, then that rom wont work.