Hi!
First of all, i'm from Spain, so i'm sorry if my english isn't correct.
I've tried to upgrade my S200 to wm6, using the pdaviet's rom.
Everything works fine, except when I connect the usb cable from the computer, the qtek goes off. I need to disconnect the cable to turn on, because if the cable is connected, the pda doesn't turn on.
That problem only appear in the wm6 rom, in the original wm5 rom everything works ok. I've tried with different wm6 roms (pdaviet, fantastic b4).
My IPL/SPL is 2.20.0001 and Radio is 2.69.21
I did a hard reset, in every rom update.
Related
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Don't know for sure that it will help, but when you want to connect to your PC in USB mode (bootloader) you should first disable "Allow USB CONNECTION" in the conections settingpanel of Active Sync.
thanks i'll give it a try
joesa said:
--------------------------------------------------------------------------------
mine is a G4 device IPL 2.09 SPL 2.09.0000
i flashed several times my prophet with diferent wm6 roms but i allways downgrade to wm5, cause some issues i didn't like,
this morning i tried to upgrade to wm6 again, made the procedure
1 Hard reset
2 connect to pc and wait to activesync to come up
3 run upgrade utility and wm5 flash started
after a while the upgrading process stucked at 5% and gave an error, i don't remeber whitch it was,
but since then my prophet always turns on in bootloader mode, you can do nothing, even turn it off, the only way to turn it off is removing the battery,
when you put the battery again and press power on it starts in bootloader mode
the diference that i notice it's that now the bootloader shows
IPL 2.09 and SPL 2.09 not anymore SPL 2.09.0000
so i tried again to flash the prophet but it always give me this errors
300 when i used the wm5 spanish rom
and 274 conection problem when i use the temp pdaviet rom or the fantastic mobiz rom
when i plug the prophet to the pc the bootloader displayes USB but activesync never starts
what could be my problem i used the correct G4 roms
please somebody help me
Click to expand...
Click to collapse
Try to search the new ROM update utility and try to reflash using it.
pda is dead
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
dj00912 said:
hey friends..!!
i have a problem with my neo..
got new update of wm 6. 4..0.0.0.1 version..
phone gets switched off by itself.. sometimes..
when sms comes or i recieve a call..
i fear it has become a black brick..
plz help me out..!!
and..
one more thing..
is there any was to restore my contact.. i had a backup in wm 5..
the back up file when restored in w m 6..
contacts don t open.. then again i hjave to hard reset it..
lost my contacts and documents.. but i stii have that back up file..
plz help me out..
replies awaited..!!
Click to expand...
Click to collapse
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
chavdar said:
For the WM6, try Gullum V6 Touch...
Now for the contacts problem - flash WM5 back, restore your contacts and back up them with PIM backup 2.5 (use search you will find it in the forum somewhere).After reflashing the WM6 you will be able to restore them again. The other option is to use Outlook to synchronize.
Click to expand...
Click to collapse
It's beter NOT to use any backup software when you migrate from WM5 to WM6 or the other way around. Sync first with your desktop ans sync back after upgrading. The standard location are not the same, so it is messy when you replace the files to their original positions.
hi all, hope someone can help, been reading threads for days and this is about my fifth xda so i'm no newb.
it's an i-mate jamin i got for my father, ipl/spl 2.13.0001 (G4) bought second hand from ebay, seems to work fine running wm5 os 2.13 but won't send text messages, didn't think much of it since i was planning to upgrade to wm6.1, unfortunately NO KNOWN METHOD WORKS.
Here's what i've tried:
Two different windows xp computers, two different cables, re-install activesync, hard reset, multiple connection retries.
PDAViet temp step 1 from OS and Bootload, most common error is [264], tried NVID wm5, tried official IPL 2.20.0001 upgrade and official i-mate ROM, tried jump/soft/hard SPL, all go to white bootload screen but no further, sometimes the green LED will flash as a radio signal on this white screen but usually nothing.
It seems very much to me like the bootloader is not responding, can someone please tell me when you put the phone in the bootloader and plug the usb cable in, after it has said USB, if you then unplug the cable should the USB text dissapear? because on mine it remains..
when running hardspl.bat the only error on the script is;
cerun: program could not execute (0), after trying to run jumpspl, altho it DOES go into the white screen and just sit there, yes i've tried pressing the camera button.
I'm fresh out of ideas here! help please!
when i run Prophet_G4_IPL_v2.20.0001.exe after a hard reset (sticks on bootloader and give [264]) but before that it says upgrade from 1.2.0.0 to 2.20.
That first number doesn't seem right? is it possible the previous owner flashed a G4 ipl onto a G3 device? and how would I tell?
hello
I'm having a problem with my Wizard.
I was with a rom and slowed, and began to slow in bootscreen.
I spent Wizardlove no use, no use WM5 original.
my wizard is not with the spl olip.
this spl and IPL 2.22.0001
bootloader and in turn makes sound that connects, most do not connect the hardspl nor softspl, only the ruu connects.
what do I do?
Thank you
sorry for English
Which windows is running on your pc,if its Vista,there are still problems while flashing on Vista,WinXP is recommended.
Get the phone in Bootloaders and connect with pc,when small usb appears,run the RUU in the rom,only try to flash official stock rom,well you can also try to flash wizard_love rom.Hope it'll flash.Activesync doesn't work and connect in Bootloaders,so stop worrying if it doesn't connect,its not required during rom flash.hardSPL or SoftSPL also do not work in Bootloaders,it must have a working OS and connection through Activesync.Get the battery fully charged before flashing,many communication problems are due to weak battery,and take out,if any sdcard or Minisd card in the phone before flashing.
most already put the wizard love and still hangs in bootscreen
help me ;/
Download official stock rom of your carrier,get the phone in Bootloaders,Hook up the phone with pc via usb cable,check if small usb appear at the bottom of the Bootloaders ,if its there,then its establishing connection.Run the RUU in the rom,it'll start to flash,but if there's no usb present in the Bootloaders,then there's a connection problem.Either the usb cable is faulty or the mini usb port of the phone is broken.
already tried by several Ronse, original qtek, and wizard love economies do not seem to advance not always hangs at the exchange bootscreen wizard love always
Hello,
I wish to upgrade my Orange SPV M3100 to WM6 or 6.1.
Unfortunately, I can't establish an ActiveSync connection with my PC. I plug in the USB cable but nothing happens - the phone charges, nothing else. I have tried with 3 other PCs and they give the same result.
Therefor, I can't install HardSPL, which means I can't upgrade to WM6, as there are none for my CID.
On that subject: the upgrading guide says the flash will not work if the CID doesn't match. Does this mean "using the wrong ROM to match your CID will brick the phone"?
I just thought I'd point out that contact has been made via Bluetooth, however I don't think this is suitable for installing HardSPL.
EDIT:
After some experimentation, guessing, and praying, I've managed to upgrade the phone.