i'm stuck in boot load and can't restart plzzz help
"1. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
2. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
3. Run HimaUpgradeUt_noid.exe
4. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
5. Detach your device from the cradle.
6. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)"
Related
I am trin to use one click root and I can not get my vibrant to go into recovery mode..I tried holding the volume and power buttuns down but doesn't work..Can anyone help me please???
You can try this
Samsung Vibrant Download Mode
Method 1 (without ADB):
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen (screen turns on when plugged in) EX: Shows a battery, shows error messages if bricked, etc. Shows anything.
IF the phone screen does 'turn on' after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold both the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
This is how I got into download mode to fix my 'odd' brick.
This is from another person on the forum.
jimyjones said:
I am trin to use one click root and I can not get my vibrant to go into recovery mode..I tried holding the volume and power buttuns down but doesn't work..Can anyone help me please???
Click to expand...
Click to collapse
If you're referring to the One Click Root application in this thread...
http://forum.xda-developers.com/showthread.php?t=739300
Be sure that you follow the instructions. The very first instruction is critical...
1. Make sure your phone is on USB Debug mode: (MENU > Settings > Applications > Developement > USB debugging = Checked )
Assuming your usb drivers are installed correctly and your phone is in debug mode, the phone should boot into recovery mode automatically, allowing you to proceed. Just follow the instructions in the CMD shell window that pops up.
If the phone is in USB Debug mode and it's not rebooting into recovery, you likely have driver issues with the Samsung USB drivers...
Any clue how to get into? Vol- + power does not work
Hmmm... I was able to get into "USB Host Mode" by pressing Camera + Vol - + Power. This what you were looking for?
EDIT:: Be careful though I got stuck in a weird boot loop (probably because I'm an idiot).
Did not work as well - windows is not detecting phone when plugged in
Zomboogz said:
Hmmm... I was able to get into "USB Host Mode" by pressing Camera + Vol - + Power. This what you were looking for?
EDIT:: Be careful though I got stuck in a weird boot loop (probably because I'm an idiot).
Click to expand...
Click to collapse
I have managed to enter this USB Host Mode but it seems that the only way to make it work is OTG USB cable such as Nokia with USB Stick/SD Card reader attached with .nbh file on it.
Will try that in few days as my cable will arrive - I am curios do I need to make a Gold Card for it or ot - but as my phone is not branded I think there is no need to.
I had problems leaving USB Mode and I got some thrill moments but finally I have left with Vol- and Power kept for few seconds untill second vibrate.
I've managed to find a technique to enter the USB Bootloader Mode.
With phone switched on remove bottom cover (the cover over the SIM card). This will swtich the phone off. Then holding Vol+ & Vol- buttons, press the power button. Wait for phone to start and then release volume buttons. Phone displays:
PI06100
SPL-1.8.160015.3(131745)
eMMC SAMSUNG 7376MB
TOUCH A1(F:80,ID:10,V20,B:AA)
Radio-16.23.02.09_2
Serial
APPSBL
IMAGE CRC
FACTORY RESET
I've managed to find a technique to enter the USB Bootloader Mode.
With phone switched on remove bottom cover (the cover over the SIM card). This will swtich the phone off. Then holding Vol+ & Vol- buttons, press the power button. Wait for phone to start and then release volume buttons. Phone displays:
Click to expand...
Click to collapse
not work..
Bootloader mode
SlayerNik said:
not work..
Click to expand...
Click to collapse
For the HTC Radar (Omega), from an off state, I just pressed the power button together with Vol+ & Vol- ... and it went through.
Background: I flashed my tablet with a wrong ROM.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This what happens to my tablet when I boot it up:
Without USB and DC connected:
Booting normally: Tap power, logo appears and disappears, 1-2 seconds later the tablet shuts off
Booting to recovery mode: hold power + vol down, logo appears, logo disappears and shuts off.
With USB connected:
Booting normally: Same as above
Booting to recovery mode: hold power+VolUp, logo appears and disappears, Android system recovery utility v1.3.38 is up.
Note* I can use volume controllers to scroll the list however I cannot click on any of them. Tapping power doesn't work nor any other button on the tablet.
With USB and DC connected:
Booting normally: It boots into the ROM, but I cannot click anything. There's no response from touch nor any other button (only power that will turn on screen after it dims)
Booting to recovery mode: Same as above
Booting into download/flash mode: I hold Reset+VolUp+Power and it will show black screen. In the PC, it says 'unrecognized or malfunctioned USB'.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have Windows 7 64bit with Android SDK installed. I have the official USB drivers and FlashMode drivers, neither of them gets accepted when I try to install the driver.
I also got Ubuntu and here are the logs I was able to come up with:
Booted into the ****ty ROM and then I plug in USB: http://pastebin.com/vnc2q5nU
I plug in USB+DC and boot into flash mode: http://pastebin.com/qa2URP9c
Just bricked my Tf201 - I cannot get it past the splash screen. I have tried the method of Holding down power and volume down but it does not get me into the recovery menu.
The device is rooted and the last action I did was in goomanager rebooting into recovery mode so I could install TWRP
I have my laptop hooked up to the tablet.
1: When I power button down for 3 seconds nothing happens
2: power down + volume up the tablet vibrates - usb disconnect then usb reconnect sound plays on my laptop. I cannot see the device on my laptop and my ADB devices command returns a blank
3: power button for 10 seconds - USB disconnect sound plays, tablet goes to splash screen and hangs there
4: power button + volume down for 5 seconds the splash screen reappears - no USB sound
5: power button & volume up - same result
6: After a couple cycles of this I notice that the laptop does detect that there is a device attached to the laptop but it cannot install the drivers.
I tried to reset the windows and from that moment I have only the logo of your company and after that a black screen.
I did the following :
1. At the very beginning i hold down the Power key in order to switch on the device.
2. Afterwards i hold down Shift key (on screen keyboard).
3. While the Shift key is still pressed, i tap Restart option and confirm the operation.
4. In the next step i choose Troubleshoot.
5. Then i tap Reset my PC and i confirm operation by pressing Next.
6. I choose Fully clean the drive.
After some time, the message I got was: "There was an error and hit cancel".
I tried to cancel it but it was nothing happen. So i shut it down.
After that i try to get in bios:
I push the power button and hit the "del" on my keyboard but nothing happens.
( I connected the keyboard to the device on USB )
my device simply makes restarting all the time.
Can you tell me what to do?
best regards from GREECE
ps. I have only a Linux operation system on my PC.