Related
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Hmmm... have you read the Sticky thread on bricks? This sounds like a problem I have seen in there. Probably easy to fix - first try flashing back to where you started. Read through the sticky - it will help you.
http://forum.xda-developers.com/showthread.php?t=286755
How long ago did you flash? Did it never work after flashing or did it work for a day, a week...? Need more info. I assume you verified that the SIM isn't the problem?
yes i have read the brick thread and have tried flashing it again but it didn't seem to work. i've also re-did the radio ROM as well.
I flashed and upgraded to wm6 after the network problem and it still doesn't seem to work.
I don't think it's the sim problem as it works with my other phone SE k800i. But i'll try changing the sim card and get a new one on monday.
I'm leaving the option of sending it to Teleplan as a last resort as it is quite a hassle to send the dopod all the way to sydney when i'm situated in Perth.
Anyone know a service center for dopod in Perth?
dopod 838pro
i'm not sure but when i use my optus sim card, it seems to work. but not with my 3 sim card.
louiedafly said:
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Click to expand...
Click to collapse
Try starting up your phone with no sim card and see what happens, I think have the same problem, I can't use any other radio than 1.16, and even that may have problems. If I use any other radio roms, I get no service, and if I take out my sim, it doesnt even realize that there is no sim, it says no service, and also the phone will freeze on the today screen with half the plugins loaded.
BTW what radio are you using?
I get the same error with my 3 sim and the .41 radio rom.
Hey everyone,
i am so upset and lost; words cannot describe it.
So i installed WM6 black shadow and everything was working except for SMS and MMS. So i am like ok i can live with that for a day till custel' rom will come out. SO i decided to upgrade the radio to 1.43 and boom here is where the problem started, No GSM on boot up. Phone doesn't boot up. I tried install 1.40 over again, still nothing. No i tried upgrade the the rom itself, i tired custel 2.5 and nothing and i tried the new Cingular rom, still same problem. the roms flash all the way. I read the wiki, and saw the mtty.exe thing but that doesn't work for me either. I am really lost and don't know what to do.
Specs
cingular 8525
hardspl v7 cid and sim unlocked.
PLEASE HELP
4.13?? 4.10??
Where did you download these radios from??
or do you mean 1.41 or 1.43??
Yeah thats what i meant, 1.40 and 1.43 sorry. You can see how upset i am.
Thanks Again
Well, if your phone turnes on .. it's not a brick.. lol .. it IS fixable... When you turn the phone on does it go RIGHT to the 3 colored screen?
@dan5.5
You need to read the unbricking thread about this, all the info you need is there.
http://forum.xda-developers.com/showthread.php?t=286755
If you are superCID I don't see how flashing a radio could have messed up your phone.. that's weird.
mrvanx said:
@dan5.5
You need to read the unbricking thread about this, all the info you need is there.
http://forum.xda-developers.com/showthread.php?t=286755
Click to expand...
Click to collapse
I read everything there and nothing seems to be working for me. I woudnt post for nothing. i dont want to be annoying.
OK im going to repost what ive said on 4wm:
We need to check if your Radio BL is functional, firstly leave HardSPL v7 on there and connect to the bootloader via mtty (il assume you know how to do this).
Issue the following commands and tell us the results please:
1) checkimage (this shows the CRC checksums of each component...id expect the radio image to show a timeout....
2) info 2 (This will verify that your CID is intact)
3) info 8 (does a bad block check)
Once youve done this, flash SPL 1.10.oli to the device and once again connect up to mtty.
4) 'rtask a' this will enter the radio bootloader you will see "Enter Radio Bootloader" or something to that effect
from now on when you type the text does NOT appear on the mtty screen.
5) 'rversion' this should return your radio bootloader version...now unfortunatly if you see nothing...you radio BL is dead and sorry your device is royally bricked. If you get something returned back onto the screen (most probably containing the text '0108') then your radio BL is fine.
Click to expand...
Click to collapse
do as instructed in that text, post your results here.
I cant falsh spl 1.10 oli. it gives me the 260 error.
the 260 error is not connected via USB right? .. weird... have you tried taking your battery out for a couple minutes, then booting into BL mode? sounds weird but this worked for me when I didnt flash hardSPL firsl..
hey mrvanx's
I can't downgrade the hardspl to 1.10, anyhelp.
I cant active sync, the phone doesnt boot up.
Is there anyway to aviod having to respond on the phone.
hey,
i can get the phone to boot up into windows and then it freezes within a couple min. what should i do. Still no gsm message and no phone. thanks
Dan
OK, so let's try and get you to a working state - I've bricked mine a couple of times and it can be quite heart-stopping, eh?
The first thing I would do is re-download radio 1.43, just incase your current one is damaged somehow.
Secondly, download Black Shadow - I know it's not the ROM you ultimately want but the aim here is to get you working again and we can move forward from there.
First, boot up into BootLoader mode (hold down the OK button on the left side of the phone and the power button and then press the reset button on the bottom, just in case you didn't know
You should come to the three colour screen and it should be reading IPL-1.04 and SPL-2.10.Olipro. If it isn't, stop here and post what it does say.
If it everything is OK at this point, when you plug your phone into your computer, it should change to USB at the bottom. Just wait for the Found New Hardware prompts to clear on your PC and then flash the black rom - choose the hardspl option in the flash program.
Once that has finished and it is at the "tap screen to set up windows..." bit, put it back into bootloader mode as above and flash the radio.
This should hopefully give you a running phone again as I know this combination works OK as I am currently using it.
Fingers crossed, don't panic, and let us know what the results are
Cheers,
Smiffy.
Nothing is working, can some please help me. Is there anyt way i can restore the spl to the original one so i can send the phone back, i just got it like 2 weeks ago. thanks
Also i have a bad block thats what i think makes the phone freeze after i boot it up.
How can i get around this, thats seems to be the biggest problem.
Hey everyone, let me give you more info.
I can fully flash any rom and and radio,
phone will boot up like 1 out of 10 times and then freezes and thats it.
i have a bad block number 6. I have hard spl v7 installed before the phone got screwed up. I cant downgrader the spl to a lower one to check if radio stack is screwed up. Can someone please help me, if you need to ask me more info feel free.
Hi all,
First of all I want to let you know that I did search the forum for a solution. In fact, I found a lot of workarounds but none of them actually worked.
Let me give some details about my problem: My Hermes was working fine. I was running the official WM6 ROM supplied by HTC, so no customized ROM here.
It was going fine until the WM frozed. Then I soft reset the device and after that I never got cellular signal again.
While booting the device I got the message: "no GSM".
First thing I tried was to flash a new radio ROM. In all the attempts the progress bar never moved from 0% and after a while I got the communication problem error.
Then I tried flashing a whole ROM. This time the progress bar stopped at 81%. Apparently in the first 81% it flashes the OS and in the last 19% it writes the radio. Anyway, I tried this a few times and never finished.
In fact, after every communication error message I got stuck in the bootloader screen.
The only thing that works is to flash a ROM WITHOUT the radio!!
Is there anything I can do to save my phone or am I condemned to use my Hermes as a phone-less pda?
I tried everything I found in the wiki/forums, but I couldn't find a working solution.
I suspect that the blocks of memory where the radio data reside got corrupted, could that be possible?
PLEASE HELP!
thanks in advance!
Chris
A similar thing happen to me several months ago. While on a call my phone froze and when I soft-reset it the dreaded 'No GSM' issue appeared. I tried flashing radios/full roms/etc, but nothing worked. I ended up sending my phone to the htc repair facility and they fixed it at no cost. (Other than not having a phone for ~10 days)
Thanks dang, but I don't have a HTC service center where I live (Argentina, LATAM)
I'm faithful that the people of this wonderful community will be able to help me.
Just for curiosity, where did you send your device? Is it in the US?
cheers
sounds like a hardware problem to me...
Hi, there! I found that a lot of us who have bricked our Hermes, don't have a responsive radio bootloader, so when they try to flash a full rom, the progress bar hangs to 13%, or 81%. This is because at that time the flasher is trying to enter the radio bootloader, but because it's corrupted, it hangs. Till today there is no known solution to this one. I'm far away from England where I bought my Hermes, so I'm not thinking to send it back for repair. I'm a programmer, so my knowledge may be usefull here. The first thing I must know is if i can use the "lnb" command without being SuperCID. I mean if there is something like a Hard-SPL with an "lnb" command - (or renamed for security reasons). Maybe there is hope!
How can I try that?
windshearx said:
The first thing I must know is if i can use the "lnb" command without being SuperCID. I mean if there is something like a Hard-SPL with an "lnb" command - (or renamed for security reasons). Maybe there is hope!
Click to expand...
Click to collapse
You can use 'lnb' in HardSPL without having a real SuperCID; however you will not be able to flash a radio with 'lnb' command. The radio chipset has its own bootloader, the and the SPL just acts as a pass-through sending the data directly to radio chipset through the s2410 UART.
I had one device with non-responsive htc_boot and tried all kinds of SPL patches to flash htc_boot again on radio, without success. The only known method to fix this is to take the BGA chip out with hot air and reflash it with special hardware, as it is not common to have this equipment at home, your only option is to send it somewhere to do it for you.
However, I don't want to discourage you to research on it, maybe you find something i didn't
I have a similar problem
I also have a NO GSM and corrupted CID but I can access KITL and use it with PB 5.0. and I followed this steps here but the phone doesnt boot completely. It stops just after the two boot screens on Black WM6 ending on a white screen and the debug window on PB after loading all sort of things begin showing these lines over and over:
@@@@@@ HUB state changes now @@@@@@
[HDC]HubStatusChangeThreadPN TRUE
[HDC]HubStatusChangeThreadPN FALSE
Is there any hope for me? I have the cingular 8525
thanks
Gents, do you think the solution presented in http://forum.xda-developers.com/showthread.php?t=280425 could help me?
Please advise.
thanks again
chriscec said:
Just for curiosity, where did you send your device? Is it in the US?
Click to expand...
Click to collapse
I sent it to the HTC service center in Texas, US.
I just got my replacement from ATT.. Had the same problem. Its a hardware problem.. I wouldnt waste anymore of your time.
first, i'm sorry for my english
I've the same problem with a V1605 (french SFR), i've tried every solution but flash radio doesn't work.
I can flash cooked os without any problem, but it's impossible to put official
It's only a pda now, it's better than a brick
My hernes use to be the same as you 'NoGSM'.I tried to install the official rom,but it 's not work at all.I called to service center ask this problem,so they said that it must be only changed the mainboard. That 's terrible!!!
for ALL -that has NO GSM and stuck at OS boot,
please follow this link -
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
the link above help me to bring back my hermes alive (about four hours work).
otoro_315 said:
for ALL -that has NO GSM and stuck at OS boot,
please follow this link -
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
the link above help me to bring back my hermes alive (about four hours work).
Click to expand...
Click to collapse
That only works with phones with KITL...which I don't seem to have.
Sorry, how to config the phone with KITL and solve the no gsm problem.
No GSM but when sim inserted
Hi all, First sorry for my bad english.
I also have 2 bricked Tytn Hermes 200. Its not my personal ones Its my company's property, which pple were using this phones. So i'm facin with problem which many pple here having but with exception. both phones having no gsm error when sim inserted but without sim its fine. In other words , device info showing every info including IMEI when sim unavailable. And some times works with sim but after making few call and receiving phone hangs(not system) and goes off from network but anthena signal still showing few bars. I'm thinking maybe the radio hangs totally and goes off, and after soft restart NO GSM. I also tried many flashing upgrading those things nothing can really help me.
When im flashing original rom from HTC (the latest one HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108) its hanging on 12% and doing 3 or 4 times recovery , but its finishes succesfully. So what exactly happening in 12th%?. Maybe its started flashing radio and stopped on bad block ? But then why its finishes succesfully after few retry?. Ok so if any one wants to experiments on the phones except radio welcome. I'll help. And some can give me quick example of how to check bad blocks?.
Tnx.
@akarandomjames -
#1. have you try the comm button+reset button hold for 2-3 seconds
#2. OR try the comm button+OK button+reset button hold for 2-3 seconds
anyway, i'm not sure if KITL is dependend on the ROM version. because when my device was in NO GSM status, SPL is 1.04, HTC bootloader is 0108, and lost SuperCID. Because of my device is still has SPL 1.04, i was able to load WM5 full ROM upgrade using WWE HTC English QTEK_001 2.05.255.1 01/17/07 version (ROM available on this site under HERMES Upgrade link), run it twice. once you have successful load the WM5 ROM then try to do step #1 or #2 above to get KITL USB display on your screen device.
Note: i don't think KITL mode is not available once your device is in Production Mode. anyone here can verify this?
otoro_315 said:
@akarandomjames -
#1. have you try the comm button+reset button hold for 2-3 seconds
#2. OR try the comm button+OK button+reset button hold for 2-3 seconds
anyway, i'm not sure if KITL is dependend on the ROM version. because when my device was in NO GSM status, SPL is 1.04, HTC bootloader is 0108, and lost SuperCID. Because of my device is still has SPL 1.04, i was able to load WM5 full ROM upgrade using WWE HTC English QTEK_001 2.05.255.1 01/17/07 version (ROM available on this site under HERMES Upgrade link), run it twice. once you have successful load the WM5 ROM then try to do step #1 or #2 above to get KITL USB display on your screen device.
Note: i don't think KITL mode is not available once your device is in Production Mode. anyone here can verify this?
Click to expand...
Click to collapse
My device is still SuperCID and I know I don't have KITL...I have SPL 1.04 as well and HTC Bootloader is 0108. I can't install any ROMs with radios as they will hang at 11/12%. I will attempt this "overload" method where it seems some people have had luck with it...after a few recoveries it just finally installs...but I don't think that will be the case.
If I can't fix this in a few days, I will most likely use my warranty or just wait for the Kaiser.
My variation of No GSM
I feel like I have problem 1A...where I am able to boot into OS but no GSM.
I am still SuperCID, SPL 1.04, HTC Bootloader 0108. Last known radio before corruption was 1.48.00.00. ROM where this problem occured: VP3G 3.60.1.
I was not even in the middle of an upgrade...just a soft reset after my phone ALREADY lost GSM capabilities during a tether session. It was stuck with no signal in Phone Mode...I put it in Flight Mode...then tried to move it back to Phone Mode and it wouldn't do so. I soft reset...and the no GSM stuck.
I tried to reinstall radio...many errors...stuck on bootloader. At first, OS's only were not installing as well but I got past that. Now I am able to boot into OS's with limited capabilities...and they will NOT ACTIVESYNC at all. Regardless of how old or new the ROM is. I tried older OS's that I knew worked in the past for me...but they refused to activesync.
Due to that, I am not able to install latest HardSPL 2.10Oli via SSPL. That seems to be the only way to do it according to my knowledge and what I've read. Maybe mtty was capable but I'm not sure. HardSPL 1.40Oli wasn't giving me any problems though, but I just wanted to have the latest one so I can avoid IPL damage.
I can only install anything if I start the device in bootloader...and I'm only limited to the OS since my Radio Bootloader seems corrupted.
I'm not sure what caused the corruption in the first place...but I feel annoying now posting on different parts of the forum with a problem that seems to be growing in the community.
Appologize for posting the thread twice... I wasn't sure if this goes to the Hermes or the Herald forum...
Hello All,
I recently got an ATT 8525 and I'm trying to use it with my T-Mobile (US) SIM. I was able to successfully unlock the SIM and CID with an util/rom I found on this site (I think the post was from Pof). And I also re-flashed the phone with the latest ROM available.
But after about 5-10mins of usage the signal dies and when I reboot it says No GSM. Looks like the Radio ROM gets corrupted. I tried just re-flashing the Radio ROM and that doesn't help either. It works for short while and again the signal dies.
And also, I'm unable to install any of the generic ROMs (Fantastic Mobiz, PVET 40005) Although I'm connected to Active Sync when I run the Step 1 (ROMUpdateUtility_NV_G3.exe), I get a ERROR [222] : DEVICE NOT RESPONDING. And when I run the step 2 directly (update_rom.bat) I get an cannot update itsutils.dll maybe in use error.
As you can tell I've been messing with phone a lot for a couple of days with no luck and my frustration level is kinda high
As of now here’s where I stand. I re-flashed the phone (Image: 3.62, Radio 1.50) and it’s on the “Tap the screen to set up your windows based mobile device” screen. I plan on leaving it on this screen until I can a good solution.
I would like to get rid of the ATT ROM and install one of those hybrid generic ROM that is not Carrier specific. Any help will be much appreciated. Share your ideas, I’m very experimental
Phone Details…
ATT 8525
HERM100
IPL: 1.04
SPL: 1.40.0 lipro
ok ur going all over the map here.. did u hardspl first? also pvet 40005 isnt a hermes rom.. um try hardspl first THEN flash to a new rom maybe once you successfully do that then try a new 3.62 rom.. i run austinsync buts its naked..just like i like my women. ha. but if ur looking for a full blown try fun_key's rom or blinkys.. these arent carrier dependent
hey man jakeypoo, Thanks for your reply. I kinda figured that I was all over the map.
Okay first appologize my ignorance. What is a HardSPL? I did a search on this forum and I found Hard-SPL-V7.zip. Is this a good version to use? Also when I run the exe, All options are grayed out except for "Force Using SSPL" and "Is it Hard-SPL". What do I select.
Thanks!
Hardspl v7 is the latest version out there, its the one for you to use so that you're safe from future mishaps.
I also have an 8525 on T-mobile... so no worries.
Hope this helps.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
still problems (no gsm)
Thanks whistler4ever. That link was really a great help.
Here's what I did...
1. Installed the Hard SPL version 6
2. Installed the latest ATT ROM (ver 3.62 radio: 1.54) I had to do this because the radio on the phone was corrupt (says "no GSM" on the start screen) and couldn't install just the radio rom. kept giving connection errors.
3. Installed Schap's WM6 Pro 3.57 hoping this would get ride of the ATT ROM and my intial problem (no GSM) will go away.
Everything was fine for like 15 mins, then my phone just froze. I reboot the phone and sure enough the radio ROM was gone (no gsm). ;(
Running out of ideas.
1. Could this problem be because I'm using a TMobile SIM on a ATT's radio ROM?
2. Is the radio ROM specific to the phone type and provider(ATT, TMO..)? Is there a generic WM 6 radio rom? If yes, where can I find the latest version?
3. Any bright ideas?
Thanks again!
Current phone details...
ATT 8525
HERM100
IPL: 1.04
SPL: 2.10
ROM 3.62
Radio: no gsm
I was able to flash just the radio ROM - version 1.51. But again after a few hours the Radio got currupted. I also tried to follow the instruction ( http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5 ) to use the mtty.exe utility, but I don't get a USB prompt. I get Cmd prompt and if I still enter the password, it says invalid password. please help!!!
And how do I do the USB monitor capture? I could post more details that way. I'm using my girl friend's old razr now and it's painful!
I have used my t-mobile sim on AT&T rom's and other roms with no problem. I would try going back to a factory rom and then changing back to a cooked rom just to confirm its all a clean install. also, try downgrading your radio to a 1.47 or 1.48 (those have been proved pretty reliable across many cell providers).
Thanks Whistler. I'm going to start with the 1.48 version and if that doesn't work I'll try the 1.47 version. Not giving up on this.
I found 1.47 to work very well with t-mobile even when traveling...
Thanks Galaxys. I just installed the 1.47 radio. I have fully signal and the 'E', but I can't receive or make calls.
It almost looks like my TMO SIM is not compatible with the 8525. It always works for the first few minutes after an install and then stops working.
I'm very certain the phone is in good condition.
Should I try an older radio version.. like a 1.24 or something ?
Can I install just the tmobile radio rom?
I'm also going to install TNT 2.0 pro so I have the exact same set up as you and see if that makes a difference.
no luck!!!
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
try the way i posted in this thread http://forum.xda-developers.com/showthread.php?t=337125
ajjus said:
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
Click to expand...
Click to collapse
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Try to flash the entire UK T-Mobile ROM, then remove the internet settings and install the correct CAB for T-Mobile.
UK ROM here: http://forum.xda-developers.com/showthread.php?t=337163
PROVIDER SETTINGS CAB: http://forum.xda-developers.com/showthread.php?t=311446
a-h-t1, Junner2003 and galaxys - I'll try all your suggestions.
a-h-t1 - The first 2 steps went through fine. While I install the radio ROM as part of step 3, the installation doesn't go past 0%
I'm going try Junner2003 idea now. I'll keep everyone posted on my progress.
install stops at 11%
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
galaxys said:
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Click to expand...
Click to collapse
Hi Galaxys,
I don't think the IMEI is blocked. Or maybe it is, how do I find out? I don't have any of the symptons listed on the link you sent (don't hear the beeps or anything).
I originally had a T-Mobile wing. The LCD screen cracked (don't know how). And ofcourse TMo won't replace it.
http://forum.xda-developers.com/showthread.php?t=335346
I got 8525 from my company. It's almost new. Only used for a day on an AT&T SIM. This phone is free, and so I really don't have much to lose... so all out experimenting
Tried insalling from the micro card, even that stops while installing GSM. pissed!!! Why would the darn Radio not update???
this may sound stupid but if all else fails, why not...
my mda use to have signal then it would just disappear as well after 15 min or less..
turns out the sim card wasnt pressed in properly.. so i just put a piece of paper on top of the sim card to make it thicker and get the battery to press it down harder. and it solved all my problems...
just a suggestion..good luck
ajjus said:
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
Click to expand...
Click to collapse
See this post here for a possible reason (and technical explanation/theory) for your device stalling during radio update. The fix suggestions at the bottom of the page may help you - in particular :
Try cooling the device down a bit before flashing as the PIC chip (where your radio ROM is held) may flash more reliably/easier when cool. Don't ask why - that's from it's datasheet ;-)
The paper on the SIM card is a good idea too to rule out dodgy SIM connection - Great idea r0mmel
Well,
recently I've bought 8525.
But I live outside US so i needed to unlock my device.
I've downloaded "HTC_Hermes_SIM_CID_Unlock_v3a"
and have flashed my 8525 using an microSD card.
Everything went OK, then after flashing I've launched unlocker .exe. on my device and ulocked SIM and CID.
Then I've placed my SIM-card but it won't search for any network (It continues to search and search.
What should I do in this matter?
I'm running MS Vista, so I'd be glad if U suggest me to flash using an micriSD card.
Thanks.
Please help me to get out of this case.
Edit:
I've just flashed radio 1.54.30.10 using SPL 1.40 Olipro, IPL 1.1
with no luck at all.
Help me somebody.
Still searchs and searchs network, but doesn't register on network.
Same problem (NO GSM) I'm Vietnam !
I Have same problem ! now i flashed SPL-2.10.olipro and try again with Unlock v3.exe but not progress !And i check my phone at Device Infor i cannot see IMEI (IMEI: [Emty])
AT&T 8525
I have same problem no radio no gsm no imei, try everything still same result. Can anybody help.
ONLY thing to try is to either install ORIGINAL SHIPPED STOCK ROM or the ORIGINAL SHIPPED RADIO ROM. Doing anything else may permanently brick your device. This is not guaranteed to work as the radio rom is a cantankerous SOB and seems to be the achilles heel of the Hermes. In laymen's terms, radio dead, not recoverable in most cases...
Good luck...
I'm not saying its impossible but then I believe if you jump off a cliff and try REALLY hard you might actually miss the ground...