When i open my contacts it displays my contacts and my sim contacts .. I whould like to show only contacts .. does anyone know
My rom is pdaviet 4.0.0.0.6
thanks in advenced
I have the same problembut with nanoscopic,new Gullum ROM.
Both of you use search!! Duhhhh...
Hide SIM contacts
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Value: 0 = hide
1 = show
there is not ShowSim (dWord) in my registry(HKCU\ControlPanel\Phone)?!
thanks anyway
You could try creating it then if it doesnot exist.... ;-)
Just remember to shutdown & restart the phone afterwards....
better not, i am not so brave in hacking
thanx
Related
Does anyone have try this ArcsoftMMS MMS for magneto BY NCRUZ ON XDA-DEV?
1. Download AMmsC_XDAII_WM2k5 here
http://tofclok.free.fr/WM2005/AMmsC_XDAII_WM2k5.rar
2. soft reset my device
3. copy .dll to windows folder
4. install cab file
5. soft reset again
6. at this step I look in inbox --> no MMS)
7. go to menu > new account
8. step 1: set email to [email protected]
9. step 2: check the connection(I skip it)
10. step 3: name e ; user e ; password e
11. step 4: change to MMS account
12. step 5: INcoming mail ??? ; outgoing mail ??? ; domain ???
13. and then I check my inbox there is still no MMS account
14. Try to send and receive MMS & please tell me what the result... :?: :?:
for me:
Send MMS:
"Unable to send your message(s). Your Message(s) will remain in the outbox"
Receive MMS :
- Bubble Receiving MMS header in the Inbox appear but when i download MMS....
"Unable to Receive your message(s). Your Message(s) will remain in the inbox"
There is nothing wrong with my MMS setting but :twisted: :twisted: :evil: :twisted:
I have the same problem
the 1st time i setup a new mms account was a failure too, so i created another one. this time it worked & i have two mms accounts?
anyway, i did a clean install of 1.60c & followed the steps you mentioned (except 12. step 5, i placed "e" not sure if it matters at all?), mms account created the 1st time! i tried to send to my own cell number & received/download alright.
btw, i'm in indonesia too & using satelindo matrix. just for info if it would be of any help.
cheers!
rhmartin said:
the 1st time i setup a new mms account was a failure too, so i created another one. this time it worked & i have two mms accounts?
anyway, i did a clean install of 1.60c & followed the steps you mentioned (except 12. step 5, i placed "e" not sure if it matters at all?), mms account created the 1st time! i tried to send to my own cell number & received/download alright.
btw, i'm in indonesia too & using satelindo matrix. just for info if it would be of any help.
cheers!
Click to expand...
Click to collapse
well i will try with my Satelindo Matrix ASAP... i hope it works... :roll:
audio
I got the ArcSoft MMS Composer 3.0.0.25 to work in principal. However, it appears that the audio objects are not properly imbedded. Everything seems OK until the message is really sent. After sending, when the message is moved to the "Sent Items" folder, the audio object still appears under objects, but there is no sound when I play the entire message. Message received do not show any audio objects under objects, but the tex field includes a string <<sound.wav>> if the name of the audio object was sound.wav? Any idea?
help
Will somebody please explain to me...
I can make the MMS account and that but nothing is sent or received.
Please
Be sure to configure the server correctly.
Menu -> MMS Configuration ->Servers
You should get the data from your provider.
For my provider A1 in Austria I use
Server name: A1.net
Gateway: 194.48.124.71
Port number: 9201
Server address: http://mmsc.a1.net
Connect via: My ISP
Sending size limitations: 250K
WAP Version: WAP 1.2
Thanks!!
amazing!
thanks a lot. I just test sending myself a message and it works!!
But... (damn, why?)
I sent myself a message with a picture and the picture didnt came with the message, I just see a blank message and nothing more.
Did you receive this same thing?
I am trying to keep the internet connection open (while some data is transferred) I have set up a dummy email account which sends & receives every 15 mins. This opens the connection but closes before the data is finished.
Is there a registry hack to keep the gprs open for say 5 mins.
Cheers
SteveW
lobster
I have found and tried :
HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\T-Mobile Internet\AlwaysOn = 1
When I try to set the value to 1 i get an error saying error setting registry information.
Cheers
SteveW
if you follow the app unlock procedure in this forum you will be able to edit the registry. registry keys are locked by default
rgds
GPRS setting
I have unlocked the device
I have set the following :
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\Virgin GPRS]
"AlwaysOn"=dword:00000001
"ConnectionGUID"="{1BDFAB9A-77AA-1EF0-BE55-D1132E79D273}"
"DestId"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"Enabled"=dword:00000001
"EntryType"=dword:00000002
"RequirePw"=dword:00000000
"Secure"=dword:00000000
"SecureLevel"=dword:00000000
but the connection does not remain open
any ideas?
Unlocking phone
I meant what would the cost be for the unlocking people to write change the software.....
Any contact details
Cheers
STeveW
i've absolutely no experience about creating .cab-files, so is it maybe possible to anyone of you creating me one or more .cab's containing a few settings and altering a few reg-keys? i would appreciate beeing able to use this in my sd-config further on an maybe it could be useful for some other german located people using wwe-roms...
so here we go:
first i need a .cab switching my regional settings to german, and activating the connection-wizard using the param's "deutschland" and "Vodafone" , if possible.
second i have some reg tweaks, as there are (i post the altered values only):
HKCU/ControlPanel/Phone/ShowSim : DWORD = 0
HKLM/Software/HTC/Biotouch/ActionScreen/APP_0 : Name = Neue Email
HKLM/Software/HTC/Biotouch/ActionScreen/APP_1 : Name = Neue SMS
HKLM/Software/HTC/Biotouch/ActionScreen/APP_2 : Name = Neue MMS
HKLM/Software/HTC/Biotouch/ActionScreen/APP_3 : Name = Neuer Termin
HKLM/Software/HTC/Biotouch/ActionScreen/APP_4 : Name = Neue Aufgabe
HKLM/Software/HTC/Biotouch/ActionScreen/APP_5 : Name = Neue Notiz
HKLM/Software/HTC/Biotouch/ActionScreen/APP_6 : Name = Neuer Kontakt
HKLM/Software/HTC/Biotouch/APLauncher/App2_2 : Name = Aufgaben
HKLM/Software/HTC/Biotouch/APLauncher/App2_3 : Name = Termine
HKLM/Software/HTC/Biotouch/MediaHubMini/App1_1 : Name = Musik
HKLM/Software/HTC/Biotouch/MediaHubMini/App1_2 : Name = Fotos
HKLM/Software/HTC/Biotouch/MediaHubMini/App1_3 : Name = Videos
would be very great when sombody could do this for me! many many thanks in advance.....
you can use a cab manager to create cabs.
cabs can contain only reg settings while no other files in it.
you can find a 30 day trial one here:
http://www.ocpsoftware.com/download.php?nm=cecabmgr
i don't know any other freeware if there is..
here is a cab containing the reg entries in your post..
didn't test it but it should work,
u can backup those entries before, but i think it's not necessary..
hay, thank you very much for your quick support!!!
i will have a look at the cab-manager right now but allthough anybody can have a look at the regional- and connection-wizard settings? thans to all!
malsehn said:
hay, thank you very much for your quick support!!!
i will have a look at the cab-manager right now but allthough anybody can have a look at the regional- and connection-wizard settings? thans to all!
Click to expand...
Click to collapse
I don't think you can activate the connection-wizard by using a cab. perhaps you can change the default settings, but you will still have to run the Wizard (mannually or by a sort of scripting). If I knew how, I would help you out but unfortunally ... I don't...
You could create a cab that creates a shortcut to the Wizard so that on start up it will be loaded... (It may also be possible using a setup.dll file, but I have no idea how to implement this kind of functionality)
hi folks, sorry for diggin' out this old thread once more
i owned myself an artemis now and so i need a little modification on this settings- cab file once made for my old prophet..
so i asked myself, if one of you would be so kind again...
here are the reg tweaks that i would appreciate to have in one cab for usage in my sdconfig:
HKCU/ControlPanel/Phone/ShowSim : DWORD = 0
HKLM/Software/HTC/Biotouch/ActionScreen/APP_0 : Name = Neue Email
HKLM/Software/HTC/Biotouch/ActionScreen/APP_1 : Name = Neue SMS
HKLM/Software/HTC/Biotouch/ActionScreen/APP_2 : Name = Neue MMS
HKLM/Software/HTC/Biotouch/ActionScreen/APP_3 : Name = Neuer Termin
HKLM/Software/HTC/Biotouch/ActionScreen/APP_4 : Name = Neue Aufgabe
HKLM/Software/HTC/Biotouch/ActionScreen/APP_5 : Name = Neue Notiz
HKLM/Software/HTC/Biotouch/ActionScreen/APP_6 : Name = Neuer Kontakt
HKLM/Software/HTC/Biotouch/APLauncher/App4 : Name = Aufgaben
HKLM/Software/HTC/Biotouch/APLauncher/App5 : Name = Termine
HKLM/Software/HTC/Biotouch/CustAPLauncher/App1 : Name = Rechner
HKLM/Software/HTC/Biotouch/CustAPLauncher/App11 : Name = Softreset
HKLM/Software/HTC/Biotouch/CustAPLauncher/App2 : Name = Radio
HKLM/Software/HTC/Biotouch/CustAPLauncher/App5 : Name = Dateien
HKLM/Software/HTC/Biotouch/CustAPLauncher/App6 : Name = Livesuche
HKLM/Software/HTC/Biotouch/CustAPLauncher/App8 : Name = Notizen
HKLM/Software/HTC/Biotouch/MediaHubMini/App1_1 : Name = Musik
HKLM/Software/HTC/Biotouch/MediaHubMini/App1_2 : Name = Fotos
HKLM/Software/HTC/Biotouch/MediaHubMini/App1_3 : Name = Videos
i've made my changes to the previous version in red, so maby you only have to modify the old cab attached above...
many many thanks in advise to that, i never get through to making cab files myself..
Here is the new cab modified with settings in RED based on the old.
thank you for your very quick support!!! this is a cab now with all the old settings and with the red ones changed respectively added on it, to get you right? wow, that's great!!! many many thanks!!! im very happy now and so the next hardreset can come for me...
For networkwizard setting;
Put new on the registry:
\HKLM\Software\Microsoft\RIL\OperatorNames
new key such as:
xxxyy and the value of the Brand of your GSM operator
where xxx is MCC and yy is MNC (Five digit number)
And for Vodafone there are three Vodafone operator on Germany so you could put the key such as:
"26202"="deutschland" (or "Vodafone" which ever you like)
"26204"="deutschland" (or "Vodafone" which ever you like)
"26209"="deutschland" (or "Vodafone" which ever you like)
Then tap networkwizard.
Hope this will help you.
In the spirit of xmas, i figured i'd try & contribute something to the community
I just upgraded to the new Energyrom with sense 2.5, and noticed that it will search your facebook for people that match contacts, and give you the option to sync certain info with your phone, ie, pictures.
Problem is, if you're anything like me, your contacts aren't exactly in WinMo-friendly format. Specifically, it'll only sync contacts where the first & last name are in separate fields. Having just imported my contacts from an old phone via sim card to my raphael, this was not the case.
Anyway, here's how to fix it (note that if you do this, it will overwrite any photos you may have on contacts with their facebook photos. The solution to this is to, when your phone asks if you want to link facebook profiles with contacts, deselect the names of people whose pictures you'd like to keep.
Step 1: Sync your contacts with outlook, then go to Contacts in outlook
Step 2: In outlook, go to file->import/export
Step 3: Click Export to a File and click next
Step 4: Click Microsoft Excel 97-2003, click next
Step 5: click contacts, click next
Step 6:Select a destination file and click next until that process is finished
Now open Excel
Step 1: highlight the column with your full names
Step 2: Click the Data tab, click Text to Clumns
Step 3: Click next
Step 4: Deselect all delimiters except Space
Step 5: Click next until finished
This will split off all of your last names into the next column. Do any necessary tidying up by hand until you have two clear columns with first/last name. This might be a good time to remove duplicates, the function right next to the Text to Columns function in the data tab.
Save your excel file.
Now back to Outlook
Step 1: Go to contacts, delete all of your contacts
Step 2: File -> import/export
Step 3: Import from another program or file, click next
Step 4: select Microsoft Excel 97-2003
Step 5: make sure "File to Import" is the file you just finished
Step 6: Your call on duplicates, shouldn't matter. Click through until finished
Okay, now just resynch with your phone.
If your having the problem of all your contacts filed as Last, First, follow these steps:
(note: i didn't write this code, but i forgot at what site i found it, so i'm not giving credit where it's due... if you're curious, just google it)
Step 1: Press alt+f11
Step 2: In projects window, go to ThisOutlookSession
Step 3: Paste the code below
Step 4: Uncomment the strFileAs line that you want to format your contacts as
Step 5: close VB editor
Step 6: Go to tools -> macros -> macros
Step 7: Run your new macro. voila.
Code:
Public Sub ChangeFileAs()
Dim objOL As Outlook.Application
Dim objNS As Outlook.NameSpace
Dim objContact As Outlook.ContactItem
Dim objItems As Outlook.Items
Dim objContactsFolder As Outlook.MAPIFolder
Dim obj As Object
Dim strFirstName As String
Dim strLastName As String
Dim strFileAs As String
On Error Resume Next
Set objOL = CreateObject("Outlook.Application")
Set objNS = objOL.GetNamespace("MAPI")
Set objContactsFolder = objNS.GetDefaultFolder(olFolderContacts)
Set objItems = objContactsFolder.Items
For Each obj In objItems
'Test for contact and not distribution list
If obj.Class = olContact Then
Set objContact = obj
With objContact
' Uncomment the strFileAs line for the desired format
'Lastname, Firstname (Company) format
' strFileAs = .FullNameAndCompany
'Firstname Lastname format
' strFileAs = .FullName
'Lastname, Firstname format
' strFileAs = .LastNameAndFirstName
'Company name only
' strFileAs = .CompanyName
'Companyname (Lastname, Firstname)
' strFileAs = .CompanyAndFullName
.FileAs = strFileAs
.Save
End With
End If
Err.Clear
Next
Set objOL = Nothing
Set objNS = Nothing
Set obj = Nothing
Set objContact = Nothing
Set objItems = Nothing
Set objContactsFolder = Nothing
End Sub
Great POST and clearly layed out.
After reading this I dicided to do this but then found out how terribly I name my contacts, nick names etc.
After I had sorted out all the contacts with there right name and re-synced my contacts back to my phone (you might want to mention this in your first POST) that you will loose any pictures you had associated with the contacts (other than the facebook ones), but this is ok because they will be replaced by the new facebook ones but there are still some people in this world that dont have a Facebook account (cave dwellers etc (Joking)) that I had photo's attached to that are now gone&I dont have a seperate copy (its ok I did backup before I attempted this so I could get them back if I wanted).
After I have sync back I remebered why I never did this before, thats because if you put the names in the right sections then in your contacts on your phone you get the lastname first e.g instead of 'John Smith' you get 'Smith, John' which is a horrible way to view them.
I will continue to find a solution and let you know here if I find an answer.
Thank you again
Install and run this on your PPC and it will convert all your contacts to First, Last format.
Shubaroo Contact Changer
jab1a said:
Great POST and clearly layed out.
(you might want to mention this in your first POST) that you will loose any pictures you had associated with the contacts (other than the facebook ones),
Click to expand...
Click to collapse
Added, thanks
jab1a said:
After I have sync back I remebered why I never did this before, thats because if you put the names in the right sections then in your contacts on your phone you get the lastname first e.g instead of 'John Smith' you get 'Smith, John' which is a horrible way to view them.
Click to expand...
Click to collapse
This is covered by the last portion of my post. If you can convert all contacts to "file as:" in the first last format, they will sync to your phone that way. How it displays is contingent upon a setting in each contact, not your phone or anything. Running that VB macro will convert each contact to the format you're looking for, let me know if you have a problem!
im using a PPC ( Shift PDA ) Rom . but weather animation dsnt work on today screen for me even after checking the ENABLE SUNRAYS in Cookie Home Tab 2 Editor. if some one could help ??
Maybe you need to slide to Weather tab > Menu and "Enable My Location"?
if you get no other hints, try fiddling with registry,
key: HKCU\Software\HTC\Manila,
entry: Home.WallpaperMode - try changing the value to 1, 2 or 0 (sorry, don't remember which is which) + soft reset after each change - one of them could/should help
p107r0 said:
if you get no other hints, try fiddling with registry,
key: HKCU\Software\HTC\Manila,
entry: Home.WallpaperMode - try changing the value to 1, 2 or 0 (sorry, don't remember which is which) + soft reset after each change - one of them could/should help
Click to expand...
Click to collapse
Bundle of thanx sir it worked . i changed the values to 0 .