Can someone please tell me what settings you are using to get your MMS to work? I've on the computer for hours trying to figure it out with no luck.
Please help!
I'm using schaps wm6 3.60 ROM if that means anything
can anyone out there help me?
Can you get GPRS? ie. can you access the internet with your current settings?
Have you tried here? http://mb.softbank.jp/mb/en/product/xseries/htc/x01ht/
Rogers CANADA
GPRS Settings
1. Operator Name & Country : Rogers Canada
2. Network Name : MY ISP
(Name in the Connections Tab)
3. Modem Name :ROGERS GPRS
4. Modem Access Point Name :internet.com
5. Username :wapuser1
6. Password :wap
7. Domain :””
8. Is there a tick in the 'This network connects to the Internet' box :
NO
9. Is there a tick in the 'This network uses a proxy server' box :
NO
MMS Settings
2. Network Name : MY Work Settings
(Name in the Connections Tab)
3. Modem Name :ROGERS MMS
4. Modem Access Point Name :media.com
5. Username :media
6. Password :mda01
7. Domain : leave empty
8. Is there a tick in the 'This network connects to the Internet' box :
NO
9. Is there a tick in the 'This network uses a proxy server' box :
NO
1. Server Name :Rogers MMS
2. Gateway :172.25.0.107
3. Port Number : 8080
4. Server Address : http://mms.gprs.rogers.com
5. Connect Via : My Work settings
6. Size Limit : 300
7. WAP Version : 2.0
Related
I really confused about how to configure MMS client in this phone (actually since I use WM5 on my mpx200).
This is the setting for my operator.
Access Point Name : mms.indosat-m3.net
Username : mms
Password : im3
IP address (WAP Gateway ??) : 010.019.019.019
Homepage : http://www.mmsc.m3-access.com
Where should I enter these configuration ???
I'm curently using WM6.1 by GantGoSplat
I downgrade my phone again to WM 5.0 and now the MMS worked.
Concerning DUTCH Vodafone users
When flashing: [ROM][WM 6.5] "Official" v1.00 [XIP/SYS 21854] and you place the sim-card in your phone it will start the connection setup to select you country and operator and it will do some vodafone settings.
These settings DOES NOT work. You CANNOT browse after that using GPRS.
Here are the correct settings which did the job for me, plz correct me if somethings is not correct, i'd verified these settings myselves:
HSDPA Switch: Turn on HSDPA (not off)
GPRS authentication on PAP (not CHAP)
Goto START -> Settings -> 6. Connections -> 5. GPRS ->
delete all entries: and create 3 entrys:
-Vodafone MMS
Connect to: vodafone MMS
Access Point: office.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
-Vodafone Office
Connect to: The Internet
Access Point: office.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
-Vodafone Push Mail
Connect to: Vodafone Push Mail
Access Point: push.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
Goto START -> Settings -> 6. Connections -> 6. PROXY ->
delete all entries: and create 3 entrys:
-Vodafone Office HTTP
Connects from: Work
Connects to: The Internet
Proxy nameort: 192.168.251.150:8799
Type: HTTP
username/password: empty
-Vodafone Office Sock
Connects from: Work
Connects to: The Internet
Proxy nameort: 127.0.0.1:8799
Type: SOCKS4
username/password: empty
-Vodafone Office WAP
Connects from: Work
Connects to: The Internet
Proxy nameort: 192.168.251.150:9201
Type: WAP
username/password: empty
(PROXYS ARE PROBABLE NOT NECCESARY!)
Goto START -> Internet Explorer -> Menu - Tools - Options - Connections:
Automaticlly detect settings: OFF
Select network: The Internet
When using Push Mail configure it using activesync or in windows 7 or higher with: Windows Mobile Device Center.
I'm open for questions and answers.
Good luck and sorry for bad english
Wuwa
hi,
i have hcl me tablet u1 running android 4.0.3 ics and tried to connect to internet through 3g dongle i used HUAWEI e173 from operator etisalat egypt
when i connect it to the tablet there is nothing changed with the signal indicator and tried to put settings to the apn like that :
HTML:
1. Open Menu Settings Wireless controls Network
Mobile Networks Access Point Names
2. Press Menu New APN
3. Fill your parameters as shown below:
Name: Etisalat
APN: etisalat
Proxy:
Port:
User Name:
Password:
Server:
MMSC: http://10.71.131.7:38090
MMS Proxy: 10.71.130.29
MMS Port: 8080
MCC:
MNC:
APN Type: Internet
4. Press Menu, and then Save
5. Press Tick, next to etisalat to make it active
6. Press Back to return to the "Mobile network settings" screen
7. Probably optional: Select "Use only 2G networks
that was givin in this topic and there is nothing happen
please show me ho to make it work
and forgive me for my english
hi there
hi,
any help please??!!!!
i found these page " android pipip de/umts_howto php " ( change spaces with dots)
is this suitable for me or there is another good method . I'm new to the android world and don't no what to do
still no answer
any body plz
Ok. This is a weird one for me. I bought a EVO 3D off of Ebay with a bad ESN. I didn't care about the ESN since I was going to flash it over to Page Plus anyways. So, I flashed it and got everything running for it...except MMS. Talk, Text, & 3G works fine. I tried creating a default APN settings using giffgaffAPN since I couldn't get to the APN settings by going to Menu-Settings-Mobile Networks (option wasn't there). I put in what I found online as the default settings for the new APN. The APN didn't show up in the list but I didn't see the old APN either so I took it for granted that all was right in the world. I tried downloading a pic I'd received earlier via MMS and still nothing. I was still able to surf on 3G still. Can someone tell me what I'm doing wrong? Thanks!
OS: Android 4.03
Dial ##3282# on your dialer and tap edit mode then enter your msl / spc. Then go to advanced. At the bottom you will have the settings option.
On some roms you can directly change mms setting from the message app>settings
EDIT : I see you edited it yourself.
mnomaanw said:
Dial ##3282# on your dialer and tap edit mode then enter your msl / spc. Then go to advanced. At the bottom you will have the settings option.
On some roms you can directly change mms setting from the message app>settings
EDIT : I see you edited it yourself.
Click to expand...
Click to collapse
Thanks for the help! I'm the right place but not all of the options that I need or in the settings. I need to put the following in but username and password or missing. I went ahead and put in all of the info that was available but the MMS still wouldn't work.
Verizon APN settings Android:
Name : Verizon
APN : Verizon or vzwinternet
Proxy : null
Port : null
Username : Mobile [email protected]
Password: vzw
Server :
MMSC : http://mms.vtext.com/servlets/mms
MMS Proxy : null
MMS Port : null
MCC : 310
MNC : 012
Authentication type : Not Set
APN : Not Set
Note: I just found username under data profile but no place to enter in password, MCC, or MNC.
whodatdoug said:
Thanks for the help! I'm the right place but not all of the options that I need or in the settings. I need to put the following in but username and password or missing. I went ahead and put in all of the info that was available but the MMS still wouldn't work.
Verizon APN settings Android:
Name : Verizon
APN : Verizon or vzwinternet
Proxy : null
Port : null
Username : Mobile [email protected]
Password: vzw
Server :
MMSC : http://mms.vtext.com/servlets/mms
MMS Proxy : null
MMS Port : null
MCC : 310
MNC : 012
Authentication type : Not Set
APN : Not Set
Note: I just found username under data profile but no place to enter in password, MCC, or MNC.
Click to expand...
Click to collapse
I think I just figured out a step that I needed to put in. There's a field that says MMS Server URL that's just inside of the advanced menu that's a header like MMSC Setting. I put the MMSC URL into that field and I received those MMS messages that were previously just download. I need to try sending MMS messages now but unfortunately, last night, my SD card failed. I lost 16 gigs of pics (about 3k pics) and movies...including pics of the first time I held my son. Fortunately, most of those are on FB.
Thanks again for all of your help. Hopefully, when I get the new SD card in from IceMonkey.com ( Here's the one I'm getting and there's no referral link so I shouldn't get dinged for this ) and get some of the pics redownloaded, I can test out the send function on MMS.
(Asuming all drivers are installed and you have a hotspot plan or you are able to use hotspot with no problems)
Android 2.3.6
4.5.141.MB860.Att.en.US
Phone connected to usb and USB tether turned on, computer not connected to internet
Windows is connected to "Unidenfied Network" and there's no internet access. You must set manually ip.
open command promp and execute "adb shell ifconfig" (or android terminal on phone and execute ifconfig)
Find interface "usb1"
[*]Find "inet addr" and write somewhere the value (mine is 192.168.42.129)[*]Find "Mask" and write somewhere the value (mine is 255.255.255.0)
Click on network icon, Open Network and Sharing Center.
At the left, click "Change adapter settings"
Right click on the atrix network adapter (find a network adapter with the text "remote NDIS adapter..."; select "Properties"
Click on "Internet Protocol Version 4"
Click in "Properties" button
Click on "Alternate Configuration"
Click on "User Configured"
IP Address: Pick an ip address. Same value as phone except for last number (if phone ip is 192.168.42.129 you could pick 192.168.42.130 for example)
Subnet mask: Same as Phone (mine is 255.255.255.0)
Default Gateway: same ip addres as phone
Prefered DNS Server: 208.67.222.222
Alternate DNS Server: 208.67.220.220
You can also use Prefered DNS Server: 8.8.8.8 and leave alternate in blank
Click ok and save/apply changes
Wait a while and windows will connect to phone and internet will work
------------------
Also if mobile hotspot not working change current apn settings and delete "apn type".