Please can somebody tell me how to access 3 Network services on the HErmes??
Many Thanks
Planet3 from which country?
Tried to search by keywords? (Planet3 or Hutchinson or Useragent)
i wouldnt mind knowing either.
i am in the UK
thanks in advance for advice
Hi, have tried searching fond something for Three in Austria but im in UK? ANyone know how?
Thanks
Planet 3 Settings
There have been a lot of posts in the aussie forums on this one, and the initial view I got was that you needed 3 separate settings on the 3 network: 1) for the Planet 3 (Intranet), 2) for the Internet, and 3) for MMS.
It turns out that they have done away with the Intranet/Internet distinction so all you need to create is one settings definition called (in my case) "Planet 3 Settings". Create one modem entry under this definition for "Planet 3" and set the Access Point Name for this entry to '3services'. Fill in your username (email address) and password (PIN number assigned to your account) and leave all other fields blank. Oh, I forgot, set the "Select a Modem" box to 'Cellular Line (GPRS,3G)'. You then select "Planet 3 Settings" as the default for "Programs that automatically connect to the Internet" .
I still keep a separate settings definition called "3MMS" and have this selected in my MMS setup, even though it has exactly the same settings as "Planet 3 Settings". One of these days I will swap them over.
BTW, When I access Planet 3 web content, I get average to crappy video - tends to pixelate a lot. Not sure if this is down to connection speed or an old version of Streaming Media Player, but I have had to stick with this version since the newer ones don't seem to work on my re-flashed JasJam (LVSW's WM6).
Cheers
thanks for the reply,i have input the connection settings, where do i go now to view my3 etc? do i use Internet explorer?
cheers
My3 on Planet3
You access Planet3 Home from here: http://three.net.au/grd/gethome.do, then select the My3 Icon from that page. That will automatically take you to the My3 homepage and log you in.
Alternatively, here is the My3 URL: http://three.net.au/alm/gethome.do.
Your choice how you bookmark these.
Cheers
My3 on Planet3....Again
Re: my last post.
The URLs i supplied must of course be accessed from Pocket IE.
Cheers
for myself, on Three Australia, for the connection settings I call it what I want (Planet 3), and the access point name name is '3services' I then do not enter any other settings in - the username and password are left blank. this works fine on my 838pro and has done on all my previous phones
Related
If you have struggled to enable MMS on you XDA I then read further...
My XDA
OS: PPC2002
ROM: 3.20.06 ENG
ROM DATE: 07/30/03
RADIO: 4.21.00
Service Provider: OPTUS (Australia)
Software you need: EZWAP ver:2.5 (search google for a download)
Other things before starting: I am under the impression that you need to ask your service provider to enable mms on yor account before it will work? I got my sim-card in Feb 2004, and never asked optus to enable mms on my device (i only asked them for their server settings - which they couldnt give me cuz they suck) Mine works, so i'm assuming its enabled by default. Just ask them anyways.
And finally before we start: This xda is not (to my knowledge) cooked in any way. It is just as i got it.
I've tested this 3 times now, and it worked perfectly every time. Since i'm using optus (prepaid) and i couldnt find ANY details anywhere on the net for optus network MMS settings, i'm posting it here for all who are just as fed up with the lame-ass customer service as i am.
(This is quite a long post, but im taking it hell into detail here. Another thing.. its written in dumbass language so if i say something like "click OK (top right of screen)" then just think of all the newbies )
Network Settings for GPRS
TODAY SCREEN
start > settings > 'connections' tab > "Connections"
(i'm assuming you did an auto-config when you first started the unit)
Click MODIFY
Click Optus GPRS...
You should have the following details:
name: Optus GPRS Internet
modem: Cellular Line (GPRS)
baud rate: 19200
click ADVANCED
no checkboxes should be selected, and 'use server-assigned IP address' should be selected.
click NAME SERVERS
select 'use server-assigned addresses'
click OK (top right)
click NEXT
access point name: mms (if i remember correctly this used to be set to 'internet'
click FINISH
click PROXY SETTINGS
only select checkbox 'This network connects to the Internet'
click OK (top right)
(you are taken back to CONNECTIONS main screen)
click OK again
close the window and go back to today screen
------------------------
EZWAP Setup
start > programs > "EzWAP v2"
click TOOLS
select OPTIONS
GENERAL tab (tabs at bottom of screen)
Connection should be: "Optus GPRS Internet"
"Connect Automatically" checkbox should be selected.
Home Page: file://windows/ezos2.wmlc
"break line after images.." checkbox should be selected.
CONNECTION tab
select the GATEWAY radio button
Address: 61.88.190.10 Port: 9201
NO CHECKBOXES SHOULD BE SELECTED HERE - this was a big problem earlier on
Connection Timeout: 50
Retries: 5 x timeout: 100
PUSH tab
"Enable Push" should be selected.
Address is left blank.
Port: 2948
"Connectionless Push Gateway" should be selected.
"WTLS secured connection" should NOT be selected.
HISTORY/CACHE tab
No changes.
IDENTIFICATION tab
"allow client identifier to be sent through headers" should be selected.
nothing in textbox
"allow geographical location..." should be selected.
MMS tab
Message Server: http://mmsc.optus.com.au:8002
sender address type: "Phone Number"
Sender Address: {your phone number in normal form... e.g. 0431405405 NOT +61431405405}
MMS OPTIONS tab
Message Expiry: Max
"Delivery report" should be selected.
"Read report" and "hide sender" should NOT be selected.
-------------------------------
This should work now when you send or receive MMS messages!!! yayy!
Here are a few problems i've picked up; they might happen to you and then again might not... if anyone has a solution for them please let me know
1) When you get a mms message, it will display a notification on your screen. When i choose to 'get now' it just does nothing. I have to go to my inbox and the message is there, then select to download. Not a big problem, but kinda irritating? I think someone else in these forums had the same problem.
2) Whenever i used my phone on my XDA it doesnt allow me to 'close' the phone-application. thus its always running in the background then. It's like i'm just swapping between the today screen and phone. ANyways, the problem is this:
the MMS works as long as i havent used the phone. It seems that the phone application (or connection or whatever) is conflicting with the EzWAP software, or the GPRS connection or something. The only way i can get MMS to work after using the phone is by doing soft-reset. Then everything works fine. I'm guessing that if your phone is closing properly then you wouldnt have this problem at all.
If this has happened to anyone (the phone not closing) and you have fixed it please let us know!
3) This is unrelated to MMS.
I cant do a soft-reset when my SD card (1GB Ridata 66X) is inside the unit. When i do this, i just get a blank white screen. When i take the card out and soft-reset then it works fine. Any ideas?
Thats it, happy MMS'ing!!!
The cost (for anyone interested) of sending a mms message to myself and receiving it was AU$0.60 in total. This is on the OPTUS network, using prepaid.
ok, if this even helped ONE person then i'm happy
His Lordship JayDA I
yep one it is me
well thanks for your so precise explanation
cos of it i manage to config my access to vodafone.pt and send a mms
so THANKs thank you thanks
some problems still but.....time is on my side lol
thanks aggain
need EZWap 2.5
Hi, can anyone please send me the complete send the link of ezwap 2.5, i dont seem to find any evaluation version of it.
I am in a desperate need of MMS on my Qtek 1010.
Please help me
Thanking you in advance
i dont know if this is the right section for this question so MODS/ADMIN/GODS move to the right place here is my question first of all I've unlocked flashed/reflashed my cingular with pof's software so thanks to that, but I want to know how to set-up my Cingular 8525 on TMOBILE to send MMS what are the correct settings?any guide?I tried the MDA setting but cant get it to work...so I really need help...Thanks...
25 views 0 replies I'll be patient and wait...
iseedeadpeople said:
25 views 0 replies I'll be patient and wait...
Click to expand...
Click to collapse
Maybe since this forum is for upgrading. I also noticed your post at HOFO. Have you called TMO and asked? I took a quick look at TMO site and it wasnt much help. The "settings" servers/ports from the MDA will work, what is the specific issue. Is there no place to enter the servers or does it look correct and it just doesn't send or receive?
well all the fields to key-in is in there only problem is it has 2 options when im asked MyISP or My Network, dont know where to add modem there and also on the MMS setting there is a The WAP and Secure WAP?so which is which?anybody here using t-mobile MMS with cingular 8525
If your in the uk, you can sign onto my tmobile and they will send the settings to your phone.
To add a new modem you have to go to start>settings>connections> Add a new modem connection
You should specify in the mms settings to use the TMO connection
Here are the steps and settings:
Step 1. Setup GPRS connection for T-Mobile network:
Start > Settings > Connections (tab) > Connections > Advanced (tab) > Select Networks > New...
Enter the name for the profile (e.g. T-Mobile), then go to "Modem" tab and click "New...", enter name for the connection (e.g. T-Mobile Data), choose "Cellular line (GPRS, 3G)" in the drop-down menu, click "Next", the access point should be "wap.voicestream.com", click "Next", leave all fields blank on this page, click "Finish". Now go to "Proxy Settings" tab and select "This network connects to the Internet".
**Mod edit**
I removed your section on how to possibly get free internet from your provider. This board is not for the discussion warez, or anything closely related. If you want to share that type of info do it in private
Click "Ok" all the way out.
Step 2. Setup MMS:
Start > Programs > Messaging > Menu > Tools > Options... > MMS > Servers (tab) > New
Server name: (you name it)
Gateway: 216.155.165.50
Port Number: 9210
Server address: http://216.155.174.84/servlets/mms
Connect via: (the connection you created in step 1)
Sending size limitation: 300K
WAP Version: WAP 1.2
Click "Ok", set this new entry as default (with a red arrow on the icon).
You are all set.
p.s. I can get free internet on my account but not my friends', don't know why, need to have T-MobileWeb service ($5.99) to make it work on their account, eventhough still cheaper than Total Internet service ($29.99)
I never try WAP 2.0 on MMS settings, 1.2 works, so... (port 9210 is default for WAP 1.2, when choosing WAP 2.0 it will change to 8799)
hope this helps
iseedeadpeople said:
only problem is it has 2 options when im asked MyISP or My Network
Click to expand...
Click to collapse
<<<<<<<<on this part which one should i choose? MyISP or My Network when adding the modem..Thanks..
iseedeadpeople said:
<<<<<<<<on this part which one should i choose? MyISP or My Network when adding the modem..Thanks..
Click to expand...
Click to collapse
Either MyISP or My Network are the name of the profiles.
Anyway, I'll suggest leave "MyISP" alone and create a new profile insted of modify it. (probably modify it works too) It seems like some features are not open to that one.
Afterwards, when selecting network, the new profile go to the upper slot. and the lower slot probably be "My Work Network".
Hi
I am in China but I AM NOT chinese. I have been looking for the way to set GPRS and MMS for This phone forever and couldn't find. I notice we have a chinese friend in this forum. anyone could help me?
There indeed is a small app designed especially for this purpose.
Just unpack the files into any folder on your device. Click on DataConnection.exe to open the app, select "remove all" to delete all existing connection configurations, then choose the second item named as "中国移动WAP包月". after all is done, click on cancel to quit. Now ur device is capable of surfing the net and sending/receiving MMS.
Also be sure you have a data connection package, by default the data connection for web browsering via China Mobile is charged at RMB ¥0.03/kb.
settings for China Mobile gprs
Hi,
Also living in China, not Chinese. All you have to do for the China mobile GPRS is change the setting to the following and it works just fine:
1. Go to start>settings>connections>add new connection
2. Call it cmwap, set it as a gprs connection, tap next
3. access point name is CMNET
4. username and password are BOTH "CMNET" all caps
5. leave domain blank
6. tap finish
enjoy
As posted above, do make sure you get a dataplan. They have one for 25RMb a month that includes 200MB of GPRS and 300 text messages.
Thanks you very much both of you very appreciated
China Mobile MMS & GPRS setting for HTC Tytn II
could anybody tell me the China Mobile MMS & GPRS setting for HTC Tytn II. Many thanks.
seems obvious...
af888 said:
could anybody tell me the China Mobile MMS & GPRS setting for HTC Tytn II. Many thanks.
Click to expand...
Click to collapse
I've been using a Cingular 8125 with WM5 in Ningbo then Shanghai for the past 8 months. The wireless internet has never worked perfectly since I moved to Shanghai, but when I returned last week with my TyTN 2 (Tilt) it never works. I used the same standard setup CMNET, not username or password etc. No error messages, just it never connects. Maybe the TyTN2 actually does have specific settings.
首先我们进入数据连接菜单里:开始—设置—数据连接原来装有前他的连接都删掉还有拨号连接和VPN连接里都是空的有的话也统统删掉跟着按:GPRS连接 进入再按菜单—添加
描叙:移动梦网GPRS
名称:移动梦网GPRS
连接到:WAP网络
访问点:CMWAP
用户名:留空不用填
密码:留空不用填
主DNS:留空不用填
辅助DNS:留空不用填
IP地址:留空不用填
填写完后按完成.代理服务器—菜单—添加
之后就可以设置代理服务器连接了
描叙:移动梦网GPRS(名称可以随意)
连接方:WAP网络
连接到:Internet
代理服务器:10.0.0.172:80
类型:HTTP
用户名:留空不用填
密码:留空不用填
填写完后按 完成—[另注:这个是用来上WWW的代理]再添加:描述:wap连接方:WAP网络连接到:安全WAP网络代理服务器:10.0.0.172:9201类型:WAP完成.再按完成.[另注:这个是用来直接上WAP的,直接上WAP是在包月里的,不要再代理]完成退出到连接菜单在数据连接菜单中按:菜单—完成选项在我的桌面连接到:选internet网络—完成Internet连接:移动梦网GPRS
工作连接:自动
WAP连接:移动梦网RS
安全WAP连接:wap连接 最后就是按完成退出--接下来最后一步就是打开Ie按菜单—选项—连接选择自动监测设置处不要打勾....选择网络:Internet或者wap安全网络..现在就能够实现通过cmwap接入上wap网站和www网站了
that`s all
China mbile GPRS MMS Setting.
Deall All,
I am Using i-mtate JasJam, WM6.1
I used GPRS.Zip then choose the second item named as "中国移动WAP包月". , now I can brows internet, but ca not send and recieve MMS.
CHINA Mobile.
Best Regards.
mlalahoi said:
Hi,
Also living in China, not Chinese. All you have to do for the China mobile GPRS is change the setting to the following and it works just fine:
1. Go to start>settings>connections>add new connection
2. Call it cmwap, set it as a gprs connection, tap next
3. access point name is CMNET
4. username and password are BOTH "CMNET" all caps
5. leave domain blank
6. tap finish
enjoy
As posted above, do make sure you get a dataplan. They have one for 25RMb a month that includes 200MB of GPRS and 300 text messages.
Click to expand...
Click to collapse
mlalahoi,
Thanks for the information!
I'm on CM with the 神州行service.
I applied for the RMB20 package & suddenly, my GPRS settings refused to allow me to connect to the internet.
I made changes to the settings & now I'm good to go.
For the record, these are my settings:
Connects to: Internet
AP: CMNET
Username: CMNET
Password: CMNET
IP Address: 10.0.0.172:9201
I need to input the IP address or else I can't find the website I'm browsing to.
Under Connections | Menu | Advanced | Menu | Options, I configured My Desktop connects to: The Internet.
In Connections | Menu | Advanced, I set my Internet Connection to the entry I created for the GPRS connection above & set the others (Work, WAP & Secure WAP) to Automatic.
Finally, in PIE, I set my connections to Internet & uncheck the Automatically detect settings checkbox.
I'm good to go now.
BTW, what type of service are you on? My RMB20 package comes with only 50Mb of data?!
TIA!
Konker
HTC Startrek w/WM6.1 Standard by Erofich
gprs.zip on samsung omnia i900
charlieluo said:
There indeed is a small app designed especially for this purpose.
Just unpack the files into any folder on your device. Click on DataConnection.exe to open the app, select "remove all" to delete all existing connection configurations, then choose the second item named as "中国移动WAP包月". after all is done, click on cancel to quit. Now ur device is capable of surfing the net and sending/receiving MMS.
Also be sure you have a data connection package, by default the data connection for web browsering via China Mobile is charged at RMB ¥0.03/kb.
Click to expand...
Click to collapse
Hi, I got the zipped files onto my Samsung i900 but when i click on "Remove All" it says it did it but I still have modem connections in "Connections". Then, when i select on the WAP option between chinese characters it says "Fail to XML load file." any suggestions?
Thanks!
How to setting wap/gprs and acces internet
Hi I'm,
I'm buy bellwave N81i but couldn't set-up wap/gprs and accessing internet. Anybody can help me? I'm live in Indonesia
thanks
MMS and GPRS setting for the Samsung i900
Hello every one does any one know how to apply the setting for gprs and mms for the i900 samsung
I finally resolved this after a long time. First you have to set up the connection to go to "cmwap", not "cmnet" and configure the proxy settings using one of the methods above. Then you need to configure the MMS mailbox. Open Messaging and choose Tools->Options from the menu. On the list of mailboxes, click on MMS. This opens the configuration. Click the Servers tab and then the New button. Server name is whatever you want, Gateway is 10.0.0.172 (same as proxy), port is 9201 (WAP), Server Address is http://mmmc.monternet.com. The "Connect via" should be the one you already created, then change the WAP version to 1.2. Save this and then on the next screen click on the new name and click on the "Set as Default" button.
Things should now work fine.
Hi i'm expatriate in china and i have a spv c600 from orange, can i use this cellphone for GPRS and MMS if yes how can i setup it ?
Thanks in advance for your help
hey there,your info was very helpfull...i was wondering if you could help with some other issues..i got an htc diamond a month ago and i love it.. but thing is i live in china and i cant find the right pinyin input for my phone...monster chinese and cect are no help.. please assist
another problem is that i have downloaded many games on the phone but most of them wont play..the loading screen comes on and then the screen just goes back to the games folder..please assist..
need help to set GPRS(China Mobile) on P1i
hello guyz , anyone knows to set GPRS on P1i ??
how to make a new internet account for China Mobile ^^
my service is 5 yuan / month ^^
thank you for your answer ^^
Help me plzz
hey friends,
im from pakistan but using china handset, any body can tell me how i set my mms setting in my handset ? waitting for ur reply thanks
oaktree6 said:
Hi, I got the zipped files onto my Samsung i900 but when i click on "Remove All" it says it did it but I still have modem connections in "Connections". Then, when i select on the WAP option between chinese characters it says "Fail to XML load file." any suggestions?
Thanks!
Click to expand...
Click to collapse
Hey Friends,
im from pakistan but im using china handset mobile (sigmatel T99i)... anybody know how i set mms setting in my mobile ? plz tell me im waitting ur reply thanks
Hey guys,
I have an i-Star i-8016b but I cannot find any settings or extra languages for it!
Please Help!!
SOS for blackberry storm
hello guyz I'm in China and i'm using a BB Storm, does anyone know how to set GPRS on blackberry storm?? I'm using China Mobile ^^
my service is 50 yuan / month ^^
thank you for your answer
Hi All,
Not a flaming thread at all this but I hope an informative one. I love the Energy ROM and the fact that I mention it here is not to say it is a bad ROM.
I have been battling with MMS settings on my HD2 for a long time. I have never managed to get it to work at all, whatever settings I tried.
The issue it seems was the ROM I was using, the Energy ROM is one in particular. Possibly more but I have had the problem for so long I can't remember what other ROMs gave me problems.
What I can say is that in desperation, ran out of ideas, I tried changing ROMs with the sole intention of testing MMS settings and there it was, I changed to the Artemis ROM and all was well, MMS settings worked.
I am going to do further tests to be 100% sure but one thing I have noticed was that with the Energy ROM I couldn't select 'celular Line (GPRS), it was always greyed out to 'Celular Line'. I think this might have been the problem but as I say some confirmation of that required.
Here are the O2 settings:
http://mobileguide.o2.co.uk/devices/device.jsp?deviceId=614&tab=8&step=2&settingId=2897
I hope this helps someone.
Neo
those data settings are for the mobile data connection, , , mms wont send over that data network. O2 require a wap data modem set up too, purely for mms to send over.
when connectionsetup runs at first boot with an o2 sim, it sets up two data accounts, 'mobile web' and 'o2 active'.
mobile web is for, well, mobile web, and runs at full data speed, and the o2 active account is what the mms server settings are pointed at, and connects to o2's wap server.
have a peek HERE for o2 active settings.
The thing that confused me for ages is that when you go to settings connections connections manage existing connections,, it only shows you the 'mobile web' account, until you go to 'advanced - select networks' and change the top dropdown to 'o2 active', when you can then view/edit that account.
dont forget to change that top dropdown back to mobile web, cos if you leave it set to o2 active (like i did today) it uses the wap server for all your data, which isn't as fast as the mobile web server.
samsamuel said:
The thing that confused me for ages is that when you go to settings connections connections manage existing connections,, it only shows you the 'mobile web' account, until you go to 'advanced - select networks' and change the top dropdown to 'o2 active', when you can then view/edit that account.
dont forget to change that top dropdown back to mobile web, cos if you leave it set to o2 active (like i did today) it uses the wap server for all your data, which isn't as fast as the mobile web server.
Click to expand...
Click to collapse
I got confused for a while and spent ages trying to work it out. If you go Settings>Connections>Connections, under here you should find two titled sections, Proxy Internet and My Work Network.
What I have is under:
- Proxy Internet>Manage existing connections: contains the mobile web settings
-My Work Network>Manage existing connections: contains the o2 active settings using wap server.
One other thing to check is go to the Sense Message tab and go: All Messages>Menu>Setting>Options>Menu>MMS Server select the o2 MMS (might be named differently depending on ROM). You'll find a list of server details, don't need to touch these, the only thing to check is "Connect via" option and make sure it points to My Work Network. This will pick up the correct wap settings.
Just thought I'd offer my findings.
Neo_XDA said:
Hi All,
Not a flaming thread at all this but I hope an informative one. I love the Energy ROM and the fact that I mention it here is not to say it is a bad ROM.
I have been battling with MMS settings on my HD2 for a long time. I have never managed to get it to work at all, whatever settings I tried.
The issue it seems was the ROM I was using, the Energy ROM is one in particular. Possibly more but I have had the problem for so long I can't remember what other ROMs gave me problems.
What I can say is that in desperation, ran out of ideas, I tried changing ROMs with the sole intention of testing MMS settings and there it was, I changed to the Artemis ROM and all was well, MMS settings worked.
I am going to do further tests to be 100% sure but one thing I have noticed was that with the Energy ROM I couldn't select 'celular Line (GPRS), it was always greyed out to 'Celular Line'. I think this might have been the problem but as I say some confirmation of that required.
Here are the O2 settings:
http://mobileguide.o2.co.uk/devices/device.jsp?deviceId=614&tab=8&step=2&settingId=2897
I hope this helps someone.
Neo
Click to expand...
Click to collapse
Just in case someone follows this link and gets confused, the settings in it are for contract, not pre-pay.
Pre-pay:
APN - payandgo.o2.co.uk
Username - payandgo
Password - password
Proxy Tab - 'This network connects to the internet' should be ticked. That's all. No further details are necessary.
What NRG rom are you using? To avoid having to enter anything manually, after flashing one of NRG's rom, when the phone automatically configure network with O2 SIM at first boot, simply select prepay or contract (postpay?) as appropriate. Soft reset. After phone reboots, hit Start, go into Settings, Connections, Connections, then on the Task tab tap ' Automatically configure connection'. Allow it to do its thing, then soft reset. I haven't had to manually enter data or MMS settings for my O2 prepay sim in an NRG rom for a long time : )
hi to every one.
i have a question is there any on out there who is using energy rom build 29 on hd2 because i am using it and problem is that when ever i wants to send or recive emails from hd2 despite of wifi connection it starts to connect to data connection and ignores wifi .is there any ssolution that emails will be loaded just using wifi if data conn is not available and data conn if wifi is not available thanks
settings - menu - all settings - connections - connections - advanced tab - select networks
The connection chosen in the top dropdown is what programs that can auto connect to the net use, for example email, and is usually by default set to 'my isp' or (example) 'O2 mobile web' or something similar, , whatever your phone has called the data connection.
The bottom dropdown is what other items such as browser use, and is usually set to 'internet' or 'the internet' or somesuch, and items accessing using this one will first try wifi and then go to data if no wifi is present.
Try changing the top dropdown to match the bottom one, see what happens.
Also, if i remember correctly, if you edit the settings for the email account, you can choose which connection it tries to use by default, have a look there, see if you can pick 'internet' (or whatever your bottom dropdown says) as the default connection. (EDIT - in fact i know you can, because i used to provision my email settings manually when flashing winmo, and one of the entries deals with default connection UID, so go have a look at the email accounts settings first before trying the above tip.)
Also dont forget that, (although it is less common nowadays, ) some network providers only allow sending email from that account when you are on their network. For example my virgin media POP email account in the UK, will only accept outgoing messages when I am using my wifi account, and will not allow me to send when i am connected to the net via my phones O2 data account, and you get a 'relaying not allowed' response, which can confuse things.
(Im working from memory, havent run winmo in 6 months, so forgive me if something isn't worded quite right)
thanks bro but......
hi thanks bro for your time .bro i changed settings as u said but no luck and i tried to find email sertings which would allow me to use wifi as default for emails but i could not find those settings in email.and when i was using stock rom 1.66 then every thing was alright but i like energy rom.
wot should i do bro and thanks for ur coment again.
thanks bro
thanks for ur help indeed it was helpful .i again looked in to settings as u described and it worked now no problem at all
thanks bro
heh cool, yr welcome.