Anyone that has a SDHC card? - JAMin, XDA Neo, S200 ROM Development

I have found new drivers for SDHC but I don't have a SDHC card to test them
I have the drivers on my phone and my micro SD card is still working with these driver but I need to know if sdhc will work
someone pleace try and install this cab and tell me if your prophet can read sdhc cards after.
View attachment SDHC_driver.CAB

---

I have a SDHC 4 GB and I can't test it because your attachment link is not working.....

---

rbalou said:
I have a SDHC 4 GB and I can't test it because your attachment link is not working.....
Click to expand...
Click to collapse
now it works

---

I tried your CAB on WM5 (Qtek 2.20.730 GER) and WM6 (k0ster v3 WWE) with a normal SD card about 1 GB and they aren't working!!!
I doesn't own any SDHC card!

---

After install, my prophet cannot read sdhc and also no normal cards
When i remove the cab the nromal card works again, but i want sdhc

---

animelover said:
I tried your CAB on WM5 (Qtek 2.20.730 GER) and WM6 (k0ster v3 WWE) with a normal SD card about 1 GB and they aren't working!!!
I doesn't own any SDHC card!
Click to expand...
Click to collapse
ok then it oparently is not working so it wan't be in the new roms
thanks for trying

---

Also I already SDHC driver tried out,SDHC not working , normally sd also(prophet v6, sandisk 4gb sdhc)

---

I have tried your SHDC driver and other SHDC drivers. But my prophet did not
recognise it..

---

I think it it the SPL not the driver, it need to be recognized from hardware niot software, hoping it will be fixed by software, but I don't think so

---

gullum said:
ok then it oparently is not working so it wan't be in the new roms
thanks for trying
Click to expand...
Click to collapse
hey gullum,
i found this one is 102kb (CAB file size) and yours is 67kb (CAB file size)
do u think this one will work?
http://dlsvr01.asus.com/pub/ASUS/IA/Mypal A639/A639_SDHC.rar
Seems all of the ASUS PDA (which runs WM5/6 and has SD Card Slot Only) has this same patch to make it support SDHC card.
C&P from Asus web:
A639 SDHC card patch (2007/06/26 update)
Improvement：
1. It makes A639 support 4G SDHC card.
Notice：
1. The patch is suitable for both WM5.0 and WM6.0
2. It needs to reinstall this patch into device after cleanboot.
3. ROM image upgrade could not success with 4G card. Only 2G SD card (including 2G) can upgrade successfully.
Can someone who has a SDHC try this out? (***Remember to do backup first, i don't want anything happen coz i ask others for a test.)
Thanks alot!
mr_zero

---

Or can download here:

---

Update:
i try to install it (A639_sdhc.cab) but seems not working on a normal SD card after installed this patch. (i don't have a SDHC).
but trying to find out why now.
When i try the one gullum uploaded (SDHC_driver.CAB), it works with my 4Gb normal SD card (150x Transcend). but i don't have a SDHC to try.
Although seems it (SDHC_driver.CAB) didn't create a new Registry folder under:
HK_L_M >>Drivers >>SDCARD>>ClientDrivers>>SDMemory_Class
but with (A639_sdhc.cab) it created under:
HK_L_M >>Drivers >>SDCARD>>ClientDrivers>>SDMemory_Class>>High_Capacity
IClass "{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
Profile "SDMemory"
Block TransfSize 00000040(64)
Prefix "DSK"
Dll "SDMemory.dll"
Don't know will these help anything.

---

So any progress on this attempt? Would be so nice if this was possible

---

mr_zero said:
Update:
i try to install it (A639_sdhc.cab) but seems not working on a normal SD card after installed this patch. (i don't have a SDHC).
but trying to find out why now.
When i try the one gullum uploaded (SDHC_driver.CAB), it works with my 4Gb normal SD card (150x Transcend). but i don't have a SDHC to try.
Although seems it (SDHC_driver.CAB) didn't create a new Registry folder under:
HK_L_M >>Drivers >>SDCARD>>ClientDrivers>>SDMemory_Class
but with (A639_sdhc.cab) it created under:
HK_L_M >>Drivers >>SDCARD>>ClientDrivers>>SDMemory_Class>>High_Capacity
IClass "{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
Profile "SDMemory"
Block TransfSize 00000040(64)
Prefix "DSK"
Dll "SDMemory.dll"
Don't know will these help anything.
Click to expand...
Click to collapse
deleted post

---

I just got a Transcend 8Gb SDHC Class6, tried the file and won't work. Normal 4Gb (Transcend 150x) still works fine after the (SDHC_driver.CAB) installed.
If anyone want me try any other drive that might work, pls let me know.

---

Originally Posted by mr_zero
Update:
i try to install it (A639_sdhc.cab) but seems not working on a normal SD card after installed this patch. (i don't have a SDHC).
but trying to find out why now.
When i try the one gullum uploaded (SDHC_driver.CAB), it works with my 4Gb normal SD card (150x Transcend). but i don't have a SDHC to try.
Although seems it (SDHC_driver.CAB) didn't create a new Registry folder under:
HK_L_M >>Drivers >>SDCARD>>ClientDrivers>>SDMemory_Class
but with (A639_sdhc.cab) it created under:
HK_L_M >>Drivers >>SDCARD>>ClientDrivers>>SDMemory_Class>>High_Capa city
IClass "{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
Profile "SDMemory"
Block TransfSize 00000040(64)
Prefix "DSK"
Dll "SDMemory.dll"
Don't know will these help anything.
-------------------------------------------------------------------------
i already try it and makes my prophet can't detect sd card anymore.