Sorry for my english fisrt of all. When i upgrade wm5 to wm6 i lost the connection with the pc. Both s200 and pc stop to response. I restart the pc and now the ActiveSync can't recognize my device. To my pda now appears a white screen and i can't do anything on it. What can i do???
manolisf said:
Sorry for my english fisrt of all. When i upgrade wm5 to wm6 i lost the connection with the pc. Both s200 and pc stop to response. I restart the pc and now the ActiveSync can't recognize my device. To my pda now appears a white screen and i can't do anything on it. What can i do???
Click to expand...
Click to collapse
There is a WIKI for this, but I guess you're to much in a stress to search...
First of all, Allthough it looks like that connection fails on several moments, don't panic. That's only normal, just be patient after some nailbreaking minutes (or even more...) things will continue.
What to do with your device now? Put it in bootloader mode:
Press the Camera button and soft reset. It will startup with a tricolor screen.
DISable the "allow USB connection" setting within ActiveSync
Connect your device to the USB port of your PC
Run the WM5 RUU again that you were using for the "Step1"
And now, just be patient!! First it seems to stop at 80% but it will continue. Then it pauses again at 95% but don't worry. Eventually it will make it to 100%.
After that: do nothing, don't touch nothing, just start the "Upgrade.bat" from the "Step2" folder. That will take some time to before it finishes, but it will. At last, DON'T FORGET TO MAKE A PROPER HARD RESET!
Rondol1 thank you. You don't know how helped me now. I lost ten years of my life. It works, thank you.
manolisf said:
Rondol1 thank you. You don't know how helped me now. I lost ten years of my life. It works, thank you.
Click to expand...
Click to collapse
You'r welcome, I spoke out of experience......
hahaha, I remember my first wm6 upgrade that went wrong , i freaked out the same way
hma4 said:
hahaha, I remember my first wm6 upgrade that went wrong , i freaked out the same way
Click to expand...
Click to collapse
Me too .. Guess thats just normal.. Upgradnig to a hole new operating system makes you think that it is critical to your pda's life.. And when it goes wrong you think your pure prophet is gone..
manolisf said:
Sorry for my english fisrt of all. When i upgrade wm5 to wm6 i lost the connection with the pc. Both s200 and pc stop to response. I restart the pc and now the ActiveSync can't recognize my device. To my pda now appears a white screen and i can't do anything on it. What can i do???
Click to expand...
Click to collapse
I advice u following this way:
1 - U unplug the battery for few minutes, then plug it into ur device
2 - Charge ur battery until it full (about 2 hours). Note: DO NOT USE USB_CHARGE, just use the adaptor.
3 - Uninstall the current Active Sync, then install the newest Active Sync from Microsoft (ver. 4.5)
4 - Turn on ur Prophet, then make it in the Bootloader status, connect with PC, up the step 1 (from PDAViet). Be patient until it complete.
5 - Continue with any step 2 u like.
Good luck.
Me ! Help me pls ! Stuck in bootimage and Win
My Xda Neo, it's stucked WIN, now it appeared bootimage blue ---> Align Screen --> Win ---> hang ---> and not connect with PC by active sync " LED always ON " ).
I used J A F tool may saved myxda but i couldn' do anything ( Stranged " I can up any rom by J A F and Active Sync )
I changed from 2.20.0001 to 2.13.0001 and 1.00.0001 and more but it's not still work now. Although I downgraded but IPL/SPL not changed 2.20, only changed OS ???
Who can show me how to resolve ! Pls help me !
Thanks !
Related
first i tride to but another rom in my pocket (htc touch dual) then i follow the steps put the screen kept in color screen (bootloder) >>>
i try to format but it steel there and write in it :
NIKI100
SPL-1.17.0000
CPLD-4
please help me
you cold try hard reset:
power off
hold call+call disconnect buttons together, then while holding these press power on button.
but, i'd wait until someone whose tried flashing roms confirms this will reset back to original touch dual rom, as i havent tried flashing as of yet
Download MTTY and use Command "boot" if it doesnt work ... please tell us what you have done???
Why nobody cant use the search function and why on earth it is impossible to tell, what was the last thing you have try to get this error!!!
If you have get your OS back ... please dump your SPL and share it with me, for future development!
badaas said:
you cold try hard reset:
power off
hold call+call disconnect buttons together, then while holding these press power on button.
but, i'd wait until someone whose tried flashing roms confirms this will reset back to original touch dual rom, as i havent tried flashing as of yet
Click to expand...
Click to collapse
thamks but it not works
NetrunnerAT said:
Download MTTY and use Command "boot" if it doesnt work ... please tell us what you have done???
Why nobody cant use the search function and why on earth it is impossible to tell, what was the last thing you have try to get this error!!!
If you have get your OS back ... please dump your SPL and share it with me, for future development!
Click to expand...
Click to collapse
from where can i Download MTTY ??
here you are..
sackbauer said:
here you are..
Click to expand...
Click to collapse
thank you alot
but how to use it ????
i'm still waiting
hä? what do you mean - you want this tool but do not know how to use it ! for what reason do you want this tool then ?
disable active sync
connect phone trough usb and start program.
any more help -> try search function
i am off
sackbauer said:
hä? what do you mean - you want this tool but do not know how to use it ! for what reason do you want this tool then ?
disable active sync
connect phone trough usb and start program.
any more help -> try search function
i am off
Click to expand...
Click to collapse
thank you for helping
dont be engry from me becose i dont know how to use the program ..
i just want to end my proplem
NetrunnerAT said:
Download MTTY and use Command "boot" if it doesnt work ...
Click to expand...
Click to collapse
Make sure that right after you ENTER on the "boot" command you DISCONNECT the USB cable. That worked for me. Now I'm sporting the WWE ASIA rom.
aiondennis9000 said:
Make sure that right after you ENTER on the "boot" command you DISCONNECT the USB cable. That worked for me. Now I'm sporting the WWE ASIA rom.
Click to expand...
Click to collapse
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
falojjah said:
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
Click to expand...
Click to collapse
Basicly I did the following:
After recovering from the tri-color screen I did it according my own procedure to make sure it works:
1.) I placed the sspl-1.16-nike.exe on the Niki
2.) disconnect the USB
3.) Then renamed the hardspl-1.15mfg-nike.nbh to uspl-1.16-nike.nbh in the flash-uspl-niki folder
4.) run the sspl-1.16-nike.exe on the device
5.) connect the USB cable to device and desktop/laptop
6.) wait for it to say USB on the Niki
7.) flash the renamed uspl-1.16-nike.nbh with ROMUpdateUtility.exe from flash-uspl-niki
8.) ran the sspl-1.16-nike.exe on the Niki again
8.) and install the WWE ASIA rom afterwards.
Problem solved
ps: I stated 40 some hours of battery time compaired to the original T-mobile rom. Currently I am exceeding the 48hrs and have mad amount of batterylife to spare. Usage was 7% per 8,5hrs. You do the math. I am going to make 4 days with usage and 5 days would be without usage. I'll keep you posted.
falojjah said:
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
Click to expand...
Click to collapse
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
aiondennis9000 said:
Basicly I did the following:
After recovering from the tri-color screen I did it according my own procedure to make sure it works:
1.) I placed the sspl-1.16-nike.exe on the Niki
2.) disconnect the USB
3.) Then renamed the hardspl-1.15mfg-nike.nbh to uspl-1.16-nike.nbh in the flash-uspl-niki folder
4.) run the sspl-1.16-nike.exe on the device
5.) connect the USB cable to device and desktop/laptop
6.) wait for it to say USB on the Niki
7.) flash the renamed uspl-1.16-nike.nbh with ROMUpdateUtility.exe from flash-uspl-niki
8.) ran the sspl-1.16-nike.exe on the Niki again
8.) and install the WWE ASIA rom afterwards.
Problem solved
ps: I stated 40 some hours of battery time compaired to the original T-mobile rom. Currently I am exceeding the 48hrs and have mad amount of batterylife to spare. Usage was 7% per 8,5hrs. You do the math. I am going to make 4 days with usage and 5 days would be without usage. I'll keep you posted.
Click to expand...
Click to collapse
it works thanks alote
i dont beleve it
NetrunnerAT said:
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
Click to expand...
Click to collapse
thank you for what you do for me
NetrunnerAT said:
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
Click to expand...
Click to collapse
I read the whole thread before and I ended up as falojjah with a tri-color screen. My alternate procedure worked for me and now works for falojjah and all you can say is the above? pffff
falojjah said:
it works thanks alote
i dont beleve it
Click to expand...
Click to collapse
You're welcome buddy
Ooh and you might want to run TouchDual_FLO abnormal.exe just to be sure. It's on the HTC e-club download section.
aiondennis9000 said:
You're welcome buddy
Ooh and you might want to run TouchDual_FLO abnormal.exe just to be sure. It's on the HTC e-club download section.
Click to expand...
Click to collapse
Not all Roms need it!
Install it only, if you have a TouchFLO Problem. The most Roms have includ it!
NetrunnerAT said:
Not all Roms need it!
Install it only, if you have a TouchFLO Problem. The most Roms have includ it!
Click to expand...
Click to collapse
And to this downplay I say that it does make sense to install it because it clearly made Touchflo respond smoother and quicker on the WWE Asia rom. pfff
I need someone to provide me a proper guide that will not lead me to other topics and the files i should use in order to upgrade mu Orange M600 SPV with windows mobile 6.1 and some greek support.
Thanks a lot and sorry if i act like a total brat but i tried everything in the guides and i think its too misleading for a newbie like me.
I use this guide:
1. copy the 3 files from the jumpspl.zip (attached at the bottom of this post )to the
ROOT directory of your Prophet ( NOT NOT NOT inside the windows folder,)
2. UNPLUG/disconnect YOUR DEVICE from PC,
3. Execute the SPL.lnk IN THE DEVICE (use Total Commander recommended or you
will make errors), then you see Prophet in all bright or white screen,
4. Then plug back the USB port ( connect to computer), here, nothing will be seen in the prophet
(make step 5 NOW or you will receive errors and need to do over again),
5. THEN execute the Rom Upgrade Utility (ROMUpdateUtility_NV_G3.exe ( or G4), in the
HardSPL folder that you had downloaded, all activities will only take 2-3 minutes to go,
nothing will be seen in the Prophet screen. if you see unknown device detected (not normal) from PC, you need to repeat the above procedures.....
(P.S. if connection Error, NO PANIC, soft reset OR remove battery for half a minute and try again. )
6. after the flash completed, it will restart automatically.
Click to expand...
Click to collapse
But the SPL.lnk is not running either using total commander or the file explorer.What to do?
Use "Prophet Tools", there is a link in my signature.
This will allow you to HardSPL. Then, you need to get a ROM. I'd recommend one of gullums Coffie ROMs, as they have multilanguage support. They may not be WM6.1, but as far as I know, there are no WM6.1 Greek ROMs ATM.
I used your tool but after i press the hardspl the screen goes white and then nothing.Also it says error connection 204
Gherudos said:
I used your tool but after i press the hardspl the screen goes white and then nothing.Also it says error connection 204
Click to expand...
Click to collapse
deactivated your firewall too.
The screen should go white, as the new SPL does that!
i dont have a firewall
Are you using Windows XP or Vista?
I am using windows Xp,please someone contact me on msn so i can tell you exactly whats going on and maybe help me fix it.It goes to the white screen but then it disconnects for some reason.Please add me to your msn [email protected]
thanks a lot
I wish to publicaly say a thanks to l3v5y for all his great help.
Thanks a lot m8...
Would be quite usefull if you would post your solution here.
I also want to hard SPL my prophet but if i run the prophet tools select G4 and HARD SPL my PDA goes into a white screen and after a short time there is an error on my pc.
So i think i have almost the Same error but my code says ERROR 208 (CANT OPEN FILE)...
Yes i did have the same error.
Download this file and you will be ok:
http://rapidshare.com/files/112210743/HardSPL_G4.zip.html
If you need any more information i ll gladly help you.
That probably means I have the wrong/non existant file in Prophet Tools...
I had the same problem so he will be ok.
I have the same Problem. I tried the "Prohpet Tools" and the "HardSpl" tool (seems to be the same?).
As soon as i'm asked if i want to let jumpspl.exe access my prophet (TC500) and i choose yes the screen is fading to white, the usb-connection is closed and my prophet is doing nothing.
I tried it a few times and also tried another usb-cable and another usb-Port but nothing helped. My os ist xp sp3, firewall and Anti-Virus are disabled.
I tried to download the mentioned file in this thread but it isn't available anymore.
Please help me, this is getting on my nerves.
Thank you
martin-m81 said:
I have the same Problem. I tried the "Prohpet Tools" and the "HardSpl" tool (seems to be the same?).
As soon as i'm asked if i want to let jumpspl.exe access my prophet (TC500) and i choose yes the screen is fading to white, the usb-connection is closed and my prophet is doing nothing.
I tried it a few times and also tried another usb-cable and another usb-Port but nothing helped. My os ist xp sp3, firewall and Anti-Virus are disabled.
I tried to download the mentioned file in this thread but it isn't available anymore.
Please help me, this is getting on my nerves.
Thank you
Click to expand...
Click to collapse
Try lazy tools by Dioxda2
Guys i tried to upgrade my imate jasmin, to wm6 the problem was that it started to upgrade the rom but the process was interrupted, when i tried to turn it on again it does not pass the initial blue screen that gives the info of the rom. The active sync does not work because the PDA does not connect to the computer and doesn´t pass from the initial blue screen.
Is there anything you can do, or the PDA is to the trash.
Hope you can help thanks. http://forum.xda-developers.com/images/smilies/confused.gif
Which Rom
Which ROM you use?
well i used the rom that is the upgrade for wm6 that is on the portal, the one that is for prophet, but the upgrade didn´t reach the end and now the pda does not pass from the blue initial screen and it isn´t possible to achive any type of conection to the PC i don´t know what to do...
deltav13 said:
well i used the rom that is the upgrade for wm6 that is on the portal, the one that is for prophet, but the upgrade didn´t reach the end and now the pda does not pass from the blue initial screen and it isn´t possible to achive any type of conection to the PC i don´t know what to do...
Click to expand...
Click to collapse
Bro. Try the methode found in the sticky:
FLASHING TOOL For all nk.nbf (WM6.1), 3 color bootup? SOLUTIONS ... in
http://forum.xda-developers.com/showthread.php?t=353547
In ur case, although the connection seem disabled, we could still force the activesync to work for flashing. Just right click the activesync icon in lower right corner of ur pc, choose connection, force it to search the usb. retry once or twice if u r not sure, then try to reflash the rom while the activesync seem still searching for devices. If it won't start, then the better way is to follow the step from Dioxda2 above. If it started halfway as before mean u have to re download the rom with its all suitable methode such as Hardspl, jumpSpl etc.
This work on my Dopod 818pro while stucked on 3 colour bootloader screen. Hope it will work on ur case too. Good luck.
thanks bro, hope it works, i will tell you later if the pda is back online
deltav13 said:
thanks bro, hope it works, i will tell you later if the pda is back online
Click to expand...
Click to collapse
Hi again, bro. Any progress? Good luck.
Hello , i've an Orange SPV M3100 HTC and when i've tried to upload the ITA rom near the 81% of uploading the upload have a self crash !!! now i can'nt do nothing.... no hardreset or something !!! When i try to start i can see on display only The red-green-blu-white colours with derscribe : HERM100 IPL-1.01 !!! Please , help me for a new life for my Baby !!!
first on pc go to activesync settings and untick "allow usb connection". Connect to pc and run the install for the original rom (reboot into bootloader BEFORE connecting by holding power,ok button above the flywheel and reset with stylus, hold all buttons in to go to the tricolour screen. I know you're there already but this is now officially bootloader not a f***ed up boot). Theres a chance you will be able to fix it this way. No guarantees.....
Afterwards install Hard SPL on your "baby" so you increase your chance of recovery.
Hi, Thanks for your help ! I've tried but activesync do'nt show nothing . HardSPL cannot see nothing... the only thing i can read in the white stream of "baby" is the scribe change from serial to usb when i connect it to the pc .... Any idea ???
Install the Shipped Stock rom... It WON'T be picked up by activesync but that doesn't matter. Its registering that there is a usb connection so install the shipped stock rom.
DO NOT INSTALL ANOTHER ROM AS THIS MAY PERMANENTLY BRICK YOUR PHONE....
Thanks Mentore , i've a little problem more because i have'nt the original rom....Do you know where i can download it ? Migthy TTTT
hi, i've find it! ( I suppose...) >>>> Official Orange SPV M3100 AKU 3.3 update . It's a full rom official by Orange. I try now and i'll tell you if i kill me...
nothing............the program can't find via usb the baby......arghh
did you go to bootloader before trying - hold power, OK button above flywheel and reset with stylus, hpld all buttons in until it ets to bootloader ?
yes, before when i put the battery it's off, when you put in the battery is off , when you make a hard reset it's start in bootloader red-blu-green ecc. no usb connection display say " serial " , when in usb connection display say "USB" but nothing can find the "baby" in the pc-usb.....
one of probably solution i think is :WM5torage for find in usb , windows mobile 5-6 for read WM5torage and try to load original Orange rom . But i have'nt any 5 or 6...
Hold down the buttons I said on my last 2 posts to go to bootloader. Just resetting means you have a screwed up reset not bootloader reset...
Yhaooooooooooo!!! i've connect to a vista notebook and all black but with right red led on. After i've connected it to my xp desk and autoreboot the old rom.... mistery .....ghost..... bah, now is ok. Thanks overall , see next one. Ciao from Italy.
Cool, Glad you fixed it.
Hello.
For some reason HardSPL does not work in my device (I patch it but I still see SPL 2.0.20.bla instead of G4) so in the past I used dioxda2 LazyTool to update to 6.5 and it worked fine after some tries.
However today I tried my luck updating to 6.5.1 23506 from bikertibi first using his tool but after seeing that it still doesn't work (aka doesn't patch spl) I tried using LazyTools. But it doesn't work: it always get stuck in the white screen (pda) and never leaves 0% (in computer screen). After some time a connection error is detected. Tried a lot of times without success.
Device is Prophet G4 branded as Qtek S200 and is running wm5 (installed after last update leave me in three-color boot screen).
Any idea?
Thanks in advance.
Vieira said:
Hello.
For some reason HardSPL does not work in my device (I patch it but I still see SPL 2.0.20.bla instead of G4) so in the past I used dioxda2 LazyTool to update to 6.5 and it worked fine after some tries.
However today I tried my luck updating to 6.5.1 23506 from bikertibi first using his tool but after seeing that it still doesn't work (aka doesn't patch spl) I tried using LazyTools. But it doesn't work: it always get stuck in the white screen (pda) and never leaves 0% (in computer screen). After some time a connection error is detected. Tried a lot of times without success.
Device is Prophet G4 branded as Qtek S200 and is running wm5 (installed after last update leave me in three-color boot screen).
Any idea?
Thanks in advance.
Click to expand...
Click to collapse
1. thanks for using my LazyTool,
2. tips for success in NVID or Flashing...
2.1 force bootloader (better tofor NVID),
2.2 stop all related connection services like My Mobiler, Mobile commander...... @ PC,
2.3 disable today plugins,
2.4 make a softreset or clear storage or a hardreset if needed,
2.5 check your usb cable and must use rear panel usb ports.....
3. Attention needed for flashing NVID,
3.1 it will stay @ 95% for a while, so please be patient,
3.2 NVID is a WM5 rom, you may immediate make a softreset before its autorun/config for time saving (you should be feeling quite hurry in ths stage ),
3.3 make an good activesync connections with NO data selected for sync,
Forn those "bullet-proof" Prophets (no change upon hardSPL, please use lazytool
SHOULD BE OK
dioxda2 said:
1. thanks for using my LazyTool,
Click to expand...
Click to collapse
Thank you for creating it! Really appreciate your work.
dioxda2 said:
2. tips for success in NVID or Flashing...
2.1 force bootloader (better tofor NVID),
2.2 stop all related connection services like My Mobiler, Mobile commander...... @ PC,
2.3 disable today plugins,
2.4 make a softreset or clear storage or a hardreset if needed,
2.5 check your usb cable and must use rear panel usb ports.....
Click to expand...
Click to collapse
This is a clean copy of windows (only ActiveSync running) and of Windows Mobile 5 (just hard-reseted).
dioxda2 said:
3. Attention needed for flashing NVID,
3.1 it will stay @ 95% for a while, so please be patient,
3.2 NVID is a WM5 rom, you may immediate make a softreset before its autorun/config for time saving (you should be feeling quite hurry in ths stage ),
3.3 make an good activesync connections with NO data selected for sync,
Click to expand...
Click to collapse
I can flash NVID_RUU (windows mobile 5 "original") without problems.
I can't flash 6.5.1 23506 from bikertibi . Whenever I install using his tool it leaves me in three-color boot screen (after 100%, device restarts, three-color). If I try lazy tool it always gives me a connection error. PDA screen stays white, in the computer screen progress never leaves 0% and a connection error eventually appears. I've been trying for days now... :/
Any idea or suggestion?
Thanks for your help!
Vieira said:
Thank you for creating it! Really appreciate your work.
This is a clean copy of windows (only ActiveSync running) and of Windows Mobile 5 (just hard-reseted).
I can flash NVID_RUU (windows mobile 5 "original") without problems.
I can't flash 6.5.1 23506 from bikertibi . Whenever I install using his tool it leaves me in three-color boot screen (after 100%, device restarts, three-color). If I try lazy tool it always gives me a connection error. PDA screen stays white, in the computer screen progress never leaves 0% and a connection error eventually appears. I've been trying for days now... :/
Any idea or suggestion?
Thanks for your help!
Click to expand...
Click to collapse
try to download theh rom again... or pm to dear bikertibi
It worked!
I finally got it working... after a lot of tries but it's working now!
Thank you very much for your great lazy_tools and for taking time to help me!
ii need help my del axim x5 has white scren of death too can somebody help me out plz
Dopod 819
Need help with dopod 818 pro.unable to update,gives the same error as above.I'm on a vista laptop but the update does not even leave 0%.it goes to the bootleg screen but mobile sync says it's not connected.
Tried doing a hard reset,update the drivers,tried different rom updates also.
Any help out there will be appreaciated.
whamms said:
Need help with dopod 818 pro.unable to update,gives the same error as above.I'm on a vista laptop but the update does not even leave 0%.it goes to the bootleg screen but mobile sync says it's not connected.
Tried doing a hard reset,update the drivers,tried different rom updates also.
Any help out there will be appreaciated.
Click to expand...
Click to collapse
1. find an XP PC.....,
2. force your prophet to bootloader mode,
3. flash NVID......
Good Luck
Do I really need to use a XP machine? Is there a way to fix it using my Vista machine?
I had tried on downloading a different device driver for my dopod, but its still the same.
But if I have to, I will try to look for an XP machine