Stuck after SoftSPL procedure - G4

Hello there.
I´m really new but certanly i have read a lot on the forums. Still I have managed to mess everything once more.
I have a wizard love G4
ROM Version 2.26.10.2.wwe
Rom date 06/07/06
Radio 02.25.11
Protocol 4.1.13.12
ExtROM 2.26.10.105
Messed around with the splash screen from equinoxe and to make it work i needed to update the RUU from 2.00.1 that was on the installation files to RUU 2.5.2 that was extracted from an HTC.exe rom update download.
Finally it worked just fine.
Then, i decided to give it a go on the SoftSPL procedure in order to install the Black Diamond 2.0 touch rom on my phone so I placed the downloaded "Safe ROM" on the ROM folder. Started the application and everything was looking good. Then the RUU came up with the 2.00.1 version so I was a little worried, but then the so called white screen on the cell phone started but with a progress bar (how convenient)... I´m not sure if i was supposed to see the progress bar at all on the cell phone or just a full white screen.
Anyway, after 10 minutes give or take, the bar got to 100% and the pc software said Congratulations... but then the cell phone automatically restarted and inmediatelly it went to the bootloader three color screen.
I proceded with a hard reset before anything, right on the bootloader screen, (radio and voice buttons hold with reset button and then the send button accepting the restore to factory). Then the phone restarted but also in bootloader screen. So i decided to turn it off by holding the power button for a while. It did turn of, but this is where everything goes crazy... it does not turn on again... it even don´t show no led light when connecting the phone to the usb or the ac wall adapter...
This happened to me a few days ago using the shelltool with the same Black Diamond 2.0 Touch rom but probably i made a different mistake back then.
Anyway I removed the battery and the sim card and reinserted everything again, even tryed it out without the battery and direct connection.
When this happened to me the first time, I just leaved the phone without the battery all night and on the next day it turned on but on the bootloader so I drove it to our local unlocker that managed to re-install the wizard-love once again.
I´m wondering if anyone is having this same issues, or something similar.
Probably i should have ask first if the Black Diamond 2.0 was a safe g4 rom, which i´m not sure but won´t dare to try it again.

I had the same problem.

i'm afraid using the SoftSPL now :S

Try the TNT 5. I used soft spl to install tnt 5 from the wizard love rom.
http://forum.xda-developers.com/showthread.php?t=328917
They have a touch version u can think about.

Yes!!!! I love it now!
I downloaded the last SoftSPF. Now it runs a little slower on the first checking part but then it turned the screen all white!!!! Beautiful scary little issue that fortunatelly equinoxe stated on the flashing instructions.
Then I went for the TNT 5.0 Professional with HTC Home Plug-in on my CID LOCKED QTEK-9100 (But that it´s actually looking exactly like a 8125 Cingular), and it did it!.
One question tough... I´m running windows vista on my personal computer so I flashed the cell phone on another computer at my office that has windows xp, but still inside the TNT 5.0 Professional installation pack there is a RUU that states Windows Vista Update Utility. I´m wondering if this would actually run under vista... If so, then I believe that you can make SoftSPF also run under vista by just changing the 2.exe file on the SoftSPF compilation with this Vista_ROMUpdateUtility.exe file on the TNT 5.0 Professional compilation release.
Anyone care to try?
Probably I will be trying to flash a new radio with this RUU Vista utility under vista, to see if it flashes... If it does, then i don´t see why you can´t run try it out under vista.
I´m attaching only the RUU for vista so you can put inside any nk.nbf with it to use it under vista.

danielvelez said:
Hello there.
I´m really new but certanly i have read a lot on the forums. Still I have managed to mess everything once more.
I have a wizard love G4
ROM Version 2.26.10.2.wwe
Rom date 06/07/06
Radio 02.25.11
Protocol 4.1.13.12
ExtROM 2.26.10.105
Messed around with the splash screen from equinoxe and to make it work i needed to update the RUU from 2.00.1 that was on the installation files to RUU 2.5.2 that was extracted from an HTC.exe rom update download.
Finally it worked just fine.
Then, i decided to give it a go on the SoftSPL procedure in order to install the Black Diamond 2.0 touch rom on my phone so I placed the downloaded "Safe ROM" on the ROM folder. Started the application and everything was looking good. Then the RUU came up with the 2.00.1 version so I was a little worried, but then the so called white screen on the cell phone started but with a progress bar (how convenient)... I´m not sure if i was supposed to see the progress bar at all on the cell phone or just a full white screen.
Anyway, after 10 minutes give or take, the bar got to 100% and the pc software said Congratulations... but then the cell phone automatically restarted and inmediatelly it went to the bootloader three color screen.
I proceded with a hard reset before anything, right on the bootloader screen, (radio and voice buttons hold with reset button and then the send button accepting the restore to factory). Then the phone restarted but also in bootloader screen. So i decided to turn it off by holding the power button for a while. It did turn of, but this is where everything goes crazy... it does not turn on again... it even don´t show no led light when connecting the phone to the usb or the ac wall adapter...
This happened to me a few days ago using the shelltool with the same Black Diamond 2.0 Touch rom but probably i made a different mistake back then.
Anyway I removed the battery and the sim card and reinserted everything again, even tryed it out without the battery and direct connection.
When this happened to me the first time, I just leaved the phone without the battery all night and on the next day it turned on but on the bootloader so I drove it to our local unlocker that managed to re-install the wizard-love once again.
I´m wondering if anyone is having this same issues, or something similar.
Probably i should have ask first if the Black Diamond 2.0 was a safe g4 rom, which i´m not sure but won´t dare to try it again.
Click to expand...
Click to collapse
Your screen should turn white, completely white... Not white with a progress bar. That is the RUU that you were seeing. Haret.exe cause the screen to crash and then it turns completely white. THIS IS NORMAL.
Try using this version: SoftSPL - RC1. Before I got a G3 and CID unlocked it, this version of SoftSPL worked for me time and time again.

Thank Dan.
Actually the new SoftSPL worked like a charm. The screen went blank as a crash, and 10 minutes later i was on a TNT 5.0 Professional Qtek.

danielvelez said:
Thank Dan.
Actually the new SoftSPL worked like a charm. The screen went blank as a crash, and 10 minutes later i was on a TNT 5.0 Professional Qtek.
Click to expand...
Click to collapse
No problem... I know before I got my hands on a G3, thats exactly what I used to upgrade roms.

Related

Froze boot screen don't want to brick it

I have been going through the forums for a while and still not sure what to do...
8125 G4
IPL 2.25.0001
SPL 2.25.0001
GMS 2.25.11
OS 10.0.0.10
I turned it off last night at 68% bat. I turned it on today and it is stuck on the Win 6.1 Diamond Edition splash screen. I have soft reset it many times. The on/off button doesn't work so I have to remove the bat. to shut it off. I did some reading and some say it could be the batt. needs a jump start. I am not sure about this because when plugged into the computer it takes a charge.. light starts out yellow, and later turns green..( i think that is charged)
I don't want to do a hardrest until I hear that is what I have to do.. I have seen others with problems close to mine and a hardrest failed. I am able to do the softrest holding the camera button to get the bootloader screen and would like to reload the rom ( if I have to) but I used SoftSPL to load the Diamond rom and not sure I can reload it without runing SoftSPL again.
I tried to follow the loading steps for using SoftSPL, but the program it tells me to use WST v4.22 and it doesn't see the Wizard. so... can someone tell me if I can use the bootloader screen to reflash my wizard or do I have to do something else..
Thank you
or any other steps to fix this problem
I also need to add that actsync will not connect.. it doesn't see the device...
OK so I could not wait... I did a hard reset and it is back up and running. All extra software has to be redone, but all is well.

possibly bricked my Verizon xv6800 =(

First off, I've been flashing my phone for almost a year now. So I don't consider myself too big of a noob. I loaded scrosler's round 4 rom. Worked great! Until I did a soft reset. It put the phone in bootloader mode and I can't boot up at all.
Here's what I have:
Olipro SPL 2.40
Radio 3.42.50
Here's what I've tried to get it out of bootloader:
mtty1.42.exe
titan_exitbl.exe
No success. I'm able to install a ROM, but as soon as it reboots after 100%, it goes right back into bootloader.
Someone please tell me it's not bricked
Try reflashing your radio.
BTC
kill the active sync processes via the task manager, then put the phone back into the usb cradle, run the titan exit bootloader and it should work.
josh77b said:
First off, I've been flashing my phone for almost a year now. So I don't consider myself too big of a noob. I loaded scrosler's round 4 rom. Worked great! Until I did a soft reset. It put the phone in bootloader mode and I can't boot up at all.
Here's what I have:
Olipro SPL 2.40
Radio 3.42.50
Here's what I've tried to get it out of bootloader:
mtty1.42.exe
titan_exitbl.exe
No success. I'm able to install a ROM, but as soon as it reboots after 100%, it goes right back into bootloader.
Someone please tell me it's not bricked
Click to expand...
Click to collapse
If no other suggestion works this will... But it sucks.... Flash a stock rom. I garuntee that will fix the problem. then just flash back. You don't have to flash a VZW ROM and I recommend against it. My new recommended ROM for unlocking and flashing is the Alltel ROM. Its got the latest radio in it (which you already have). Good luck and let us know how it turns out.
thanks for all the suggestions. i'm not sure what exactly went wrong, but i spent about a day and a half just to get it working again. it's somewhat stable now.
after flashing an older dcd rom, i was somehow able to get the OS to boot up, even after the auto soft reset. immediately i wanted to upgrade the bootloader to 2.47 since i've only found it in an exe(only can run from windows mobile) version. I then was able to flash the OEM MR1. Which automatically downgraded my radio. it was definitely the most stable thing i've flashed since the phone got all screwed up. i could soft reset as much as i wanted and didn't get the blue screen of death aka bootloader.
but of course, i couldn't be satisfied with no gps and no internet sharing. i use internet sharing more since i use it when i commute to work on BART (bay area's version of the subway) 50 min each way.
so now i'm on DCD's 3.2.6 ROM with 3.42.50 radio. so far it's somewhat stable. if i soft reset, i get the bootloader sometimes. but a couple solutions to the get the OS to boot back up is
1.) take the battery out for 20-30 seconds and power up
or
2.) take the battery out, plug in the computer usb or power usb with the battery still out. somehow resets the phone? i have no idea.
but i read somewhere that ROM's were causing people to have to take their battery out for 30 seconds to boot up. I doubt it was DCD's ROM's. But who knows, maybe i ran a bad radio file, ROM, or bootloader upgrade, that really caused the initial issues.
My only issue now other than getting the bootloader once in a while is that GPS isn't working. Not that big of a deal for now since I have the Pioneer AVIC F90BT in my car now. but would be nice to have it on my phone (tomtom & google maps) for that one time that might come up when i really need it and i'm not in my car.
again thanks for your help in trying to help a brotha out.
Verizon xv6800 bootloader and startup issues
My issues are, I cant get into the bootloader screen no matter what I try(power, camera and reset). Most times my phone will only go to the verizon screen and then just go white, other times, it may show the WM 6.5 startup screen and the freeze there. This all came from me trying to install WM 6,5 Beta 5 21159 rom from WM 6.1. On another not, my pc will not see my phone. So am I completely screwed? Is there any hope? Thanks in advance for any help.
So, overall, am I screwed?
Anybody have any suggestions?
Thanks
Can anyone help? my phone will not let me into bootloader mode or even startup past the verizon splash screen. I am desperately hoping that its not bricked. Also, the pc to phone usb connection will not see eachother.
My phone will charge via the usb cable to pc. When the wifi switch is turned on, the led on opposite side of the power led will do it green blinking.
Is there anyone that has time and is willing to work with me?
Thanks in advanced.
I have taken the phone apart so that I could push the internal buttons (power, camera and reset) to see if the outer shell buttons were the problem. They werent. I also still can't get past the verizon splash screen. Anyone have any ideas?
Thanks
I you cant get into bootloader you dont have any options.

[Q] ROM Upgrade Issues

hey guys, im having major issues with my HTC HD2.
I have upgraded my rom previously and it worked fine. i just did the telstra one off the htc website.
STATS:
os version: 5.2.21869 (21869.5.0.82)
manila version: 2.5.20121431.1
ROM version: 1.72.841.0 (82124) WWE
ROM DATE: 02/23/10
Radio version: 2.07.51.22_2
protocol version: 15.32.50.07U
I am now tryign to upgrade once more because im having software issues with my current set-up, hoping a rom upgrade will solve it. but, i cant upgrade my rom! i am using CustomRUU.exe as the host program for running the .nbh files. i have tried artemis's latest rom, radio uprgrades, andriod ports, maxsense cooked roms, everything! and i cant get it to get past this screen.
so the issue. i hook up my HTC HD2 to my computer connect via activesync, i then drag the chosen .nbh file on to CustomRUU.exe and run the file and the rom upgrade, im doing everything they say and my htc is hooked to the computer with the arrow things confirming. i do the acceptance steps, and it gets to the progress bar and sits a 0% (on my laptop) while my HD2 works through it.
it goes to the red green blue screen, says USB down the bottom, goes black and displays a HTC loading screen with a progess bar at 0%
this is where the issue is.
it stays at 0% for about 5-10 minutes, on BOTH the hd2 and the laptop, than the computer gives me an error code [262] : UPDATE ERROR...(i am aware that this is a connection error and should resolve with restarting for the computer and the device and a new usb port used)... but this has not solved my problem. as soon as my HD2 restarts and goes to the red green blue screen i lose connection with the computer and it times out. My HD2 just loads the htc progress bar screen and does nothing
i dont even get 1%!!!!
i have tried installing HSPL but it says i need sspl 1.42.000 (i think), so when i try to install that via a rom or whateva it is, it gives me the no connection freezing issue.
im stuck in a violent circle and get get past this issue.
basically, the rom uprgrade wont work because my device is apparently disconnected form the computer and the install times out.
someone please help! PLEASE!
im sorry if this is a simply fix and im being a noob, but i just am stuck real bad!
thanks in advance guys
ryan
start with HSPL!!!
ryan whitmore said:
I have upgraded my rom previously and it worked fine. i just did the telstra one off the htc website.
Click to expand...
Click to collapse
Changing to a customized ROM is very different from upgrading through HTC website , and it starts by installing HSPL on your phone..
you should start here
http://forum.xda-developers.com/showthread.php?t=609477
but its probably easier to resolve your current "SW issues" than installing a customized suitable ROM for you at this stage.. so why dont you post what the SW issue is instead.. (unless your phone does not boot at all now..)
rgds
just quickly, sw issues?
SW issues
ryan whitmore said:
I am now tryign to upgrade once more because im having software issues with my current set-up, hoping a rom upgrade will solve it.
Click to expand...
Click to collapse
software issues = SW issues
Depending on what your Software problems are you could try to post them and try to solve it.
The fastest ways is to install the right HSPL you can use the link in the post of "ugguggh" which has a good manual about how all works. You also can read through the 1st two posts in de threat displayed below. Here you cna find which HSPL you need for your version.
CLICK HERE!
After installing the right HSPL its just a matter of choosing your desired ROM and install it.
I'm currently working with the Artimis V27 ROM NL and i'm not experiencing any problems it runs very smooth. Just format your SD card and try to download Task29. First run "Task29" before installing the ROM. It cleans up old stuff from your old ROM install. After Task29 finished press volume down before it reboots your phone so you enter the bootloader. Now you can start the CustomRuu application and install your desired rom. (if you enter a blanc HTC screen after Task29 (thats normal because there is no OS to load anymore) just remove the battery and hold volume down while putting the battery back or using the power on button)
ryan whitmore said:
i am using CustomRUU.exe as the host program for running the .nbh files. i have tried artemis's latest rom, radio uprgrades, andriod ports, maxsense cooked roms, everything! and i cant get it to get past this screen.
so the issue. i hook up my HTC HD2 to my computer connect via activesync, i then drag the chosen .nbh file on to CustomRUU.exe
Click to expand...
Click to collapse
dont do that, put customruu and the nbh in a folder on their own, then right click customruu and choose run as administrator (do this even if you are logged in as administrator)
and run the file and the rom upgrade, im doing everything they say and my htc is hooked to the computer with the arrow things confirming. i do the acceptance steps, and it gets to the progress bar and sits a 0% (on my laptop) while my HD2 works through it.
it goes to the red green blue screen, says USB down the bottom, goes black and displays a HTC loading screen with a progess bar at 0%
this is where the issue is.
it stays at 0% for about 5-10 minutes, on BOTH the hd2 and the laptop, than the computer gives me an error code [262] : UPDATE ERROR...(i am aware that this is a connection error and should resolve with restarting for the computer and the device and a new usb port used)... but this has not solved my problem. as soon as my HD2 restarts and goes to the red green blue screen i lose connection with the computer and it times out. My HD2 just loads the htc progress bar screen and does nothing
i dont even get 1%!!!!
i have tried installing HSPL but it says i need sspl 1.42.000 (i think), so when i try to install that via a rom or whateva it is, it gives me the no connection freezing issue.
im stuck in a violent circle and get get past this issue.
basically, the rom uprgrade wont work because my device is apparently disconnected form the computer and the install times out.
Click to expand...
Click to collapse
use a usb port around back of the pc, not in the front case.
the 'you need 1.42.0000...' is wrong, its old info. Use hspl3 and choose 2.08.hspl
THANKYOU! but here are my sw issues
hey guys thankyou for all ur help, i downloaded hspl3 and it worked and i have tested a few different roms,, and i installed Miri_HD2_WM65_21908_Sense25_V17.0_WithSwype, which is working quite well right now and i am pretty damn happy with it so far.
i installed S2U2 and since then it started to play up a lil..
the issues are that in general the whole entire system is slow. not neccesarilly windows but sense... :\
messages are sometimes unusable, frozen very laggy, and occasionally needs a soft reset. phones is unusable, can make calls, just cant hear dialtone, microphone sender and recevier isnt working, NO SOUND! shortcut calender viewer on the sense homescreen takes mins to hours to load appointments and sometimes doesnt for days. and in saying sometimes is lightning quick...???
besides that i am not experiencing many other issues YET...i will have to wait a few more days. though i would really like a solution to the phone issue if that is possible
would love to beable to use a android port (a very good, everyday use version), and if anyone has any info on it, would u beable to post some for me please
i have tried haret and it wont work. i load clrcad then haret it runs through the first stuff, then the screen starts to fad and i get lines on the left then it slowly goes black and nothing happens. requires a soft reset to get the phone working again..
I AM JUST FULL OF ISSUES! sorry guys
anyways thankyou EVERYONE for all your help u have been great so far
thanx
ryan

[Q] Htc hd2 won't boot windows mobile

Hello!
I use android with the htc hd2 for about 1 year ago, and the i want to back to windows mobile. I came from android, and when i finished the rom install the phone is stop when the windows mobile (orange color installer,please wait while your device is starting for the first time...) installer is finished it's always power off or just do nothing. I try to install a custom too. Neither the original and neither the custom din't work. The android work great, but i want the windows mobile 6.5.
If you have an idea please tell me.
Sorry for the bad english.
First of all, congratulations to your first post.
How have you tried to install WM?
Have you removed HSPL?
Have you changed RADIO?
Maybe you will have a look on this thread: http://forum.xda-developers.com/showthread.php?t=1421179
uli71 said:
First of all, congratulations to your first post.
How have you tried to install WM?
Have you removed HSPL?
Have you changed RADIO?
Maybe you will have a look on this thread: http://forum.xda-developers.com/showthread.php?t=1421179
Click to expand...
Click to collapse
I find my problem:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
What can i do?
somebody have the same problem?
The touchscreen isn't work in windows mobile, but if i install android or windows phone 7 the touchscreen is working
Mene44 said:
I find my problem:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
What can i do?
somebody have the same problem?
The touchscreen isn't work in windows mobile, but if i install android or windows phone 7 the touchscreen is working
Click to expand...
Click to collapse
I changed the radio the spl,hspl, rom(custom,orginal)... but nothing
bear with me here, guys, as i am new to not only this site, but to the world of htc and smartphones all together...i apologize in advance!
so my friend had this htc lying around and said i could have it since my previous phone took a crap. it's on tmobile so i was going to have it flashed over to at&t.
however, the phone seems to be a brick....it will not boot past the initial "stick together" screen.
yes, i tried the hard reboot...pressing and holding volume up+volume down+power button. it takes me to the screen asking if i want to reset the device..i hit volume up to confirm. it goes through the reset. i hit volume up to boot the device. it gets to the "stick together" screen, vibrates 7 times, and freezes.
well, it was doing that anyway...but only when plugged in. the little orange light used to turn on when i connected the charger--now nothing.
and now it won't let me into the hard boot screen again. just...black. removing the battery and replacing it does not work.
i had taken it to the gentleman to flash it to at&t, not knowing this problem existed. he called me (because i left the phone there, since he had a line of people) to tell me the phone was freezing on that screen. i gave him the ok to do what he called a "hard wipe". i went back for the phone this morning and he said he did the hard wipe, and it was still freezing--told me the phone was only good for parts at this point.
so i took it home. i plugged it in, and i did what i described above.
what the heck do i do?! i would love to be able to rescue this phone! like i said, i'm totally new to all of this so if you're going to throw terms at me like RUU (which i saw all over this site), i have no idea what you mean so please post a link to another thread or something that can explain these things to me, if you do not want to do so yourself.
oh, my friend also said she had put an at&t sim card into the phone (unflashed, still on tmobile) before and tried to turn it on...but nothing happened. could that be what caused the problems?
UPDATE: took the battery out for approximately 10 minutes. put it back in, and the phone turns on again...one short vibration while the screen is still black, then the "stick together" screen pops up and the phone vibrates 7 more times....annnnnd freezes again. its also starting to get very hot on the bottom, backside...

[Q] HTC Titan Fully Unlocked (DFT Freedom ROM V1 Eternity 24 Langs Pearl Edition)

Hello. My HTC Titan is fully unlocked as I installed a custom ROM, right? That gives me the right to download XAP's from the inbuilt browser on my phone. I have installed Supermusic, XAPhandler and Devstore7 on my phone. Now, when I turn the phone off, and try to turn it back on, it stops at the HTC boot logo and the red mini-light on left-top corner is on. The only way to use my phone again is to go to SPL mode and factory reset everything. I have been doing this for a week now and Iam getting so irritated.
Does anybody have any idea what it could be?
Also, when installed a custom rom, the apps on your phone get access to your full device. Does this increase the usage of RAM? I know that my phone is morevulnerable for malware because it is running a custom Rom. Is there any sort of antivirus app or software I can install to reduce the chances of getting infected?
I would be very greatful if somebody who knows about fully unlocking a device could answer my questions.
Thanks
I recommend flashing the ROM again.
Remember, when flashing a ROM, your computer should be doing nothing else but that. Close off processes if you have to in order to free up RAM before flashing.
It isn't uncommon to get a "Bad" flash or even a bad download before the flash. So re-download and then re-flash from a Flash-ready computer.
Hope this helps ya, let us know.
Tabbii said:
MOD EDit: Quote removed
Click to expand...
Click to collapse
I really REALLY REEEEALLY hope that it doesn't work for you.
The custom ROMs were awaited hopefully so that we could support our homebrew community that make some fantastic functionalities available on our phones. If you want to pirate stuff, kick developers' balls and then expect other developers to help you when pirate xaps f*** things up on your phone - I think every second anyone helps you, a cat dies somewhere in this world.
Please pay for the apps and support the developers instead of stealing their hardwork. It costs them their normal lives, eyes and hours of football matches.
MOD Notice​
Do not discuss obtaining paid for apps for free, we do not support piracy on XDA. Support the developers, purchase the Apps!!​
I am sorry
Right. I am sorry. I will buy these apps from now on
Pardon me for my bad behaviour, it wasn't meant to offence anybody.
Sorry once again.
And Btw, can I install things like homebrew apps now, because I have fully unlocked my ROM? What about Devstore7 and such? Any good idea how to tweak my phone with the registry editor? I am trying to set the WIFI to always on, is that possible?
I am only wondering, no offence to anybody.
Thanks,
Tabbii
Did you solve the reboot hanging problem? I'm not using any shady apps, hell I'm not using many apps at all at this point. Waiting for the HSPL fixed (mine is one of those stuck on 2.5 and can't flash HSPL or custom ROM).
Any way. Mine just started doing some weird ****. Some of my zune content can't be synced successfully (meaning it syncs and when I look for it on my phone it is a black box only. Some pics and music are just black icons, no labels and not there.) I connect to zune again and it says do more with a zune pass. I have a zune pass. Any way. I reboot the phone thinking that was gonna help and when it came back up, it had done a half ass hard reset (meaning nothing was there and had to go thru the motions of setting it up again, but in settings/about only 3GB was free)
So I flashed the stock ROM again from RUU not gold card (last time I did it thru gold card) upon completion, I set it back up, sync a couple songs and pics to it and I reboot it, no problem. So I sync some more to it, no problem after reboot. so I'm thinking it's good. So I do a FULL sync and install a few apps, then reboot. all good!
Then I install a few more apps and all have a problem and say needs attention, click here. I do and retry, but failed on all of them. so I reboot the phone (knowing what was gonna happen) well, this time it sat on good bye forever, never completely shut down, so I take the battery out and put it back in and start it up and for the first time it hangs on the HTC screen. So I go into SPL mode then try to boot again, hangs still. So I go back to SPL and so factory reset and now Im setting my phone up for the 3rd time today!
Any ideas?
I didn't want to give every app access to my phone so I installed Ultrashot's ROM. It has a root manager application to choose which apps have root access. Since you're gonna reflash anyways, I suggest trying Ultrashot's. I think it has more features than the DFT ROM, but you can decide that.
Good luck!
GreenGrenadez said:
Did you solve the reboot hanging problem? I'm not using any shady apps, hell I'm not using many apps at all at this point. Waiting for the HSPL fixed (mine is one of those stuck on 2.5 and can't flash HSPL or custom ROM).
Any way. Mine just started doing some weird ****. Some of my zune content can't be synced successfully (meaning it syncs and when I look for it on my phone it is a black box only. Some pics and music are just black icons, no labels and not there.) I connect to zune again and it says do more with a zune pass. I have a zune pass. Any way. I reboot the phone thinking that was gonna help and when it came back up, it had done a half ass hard reset (meaning nothing was there and had to go thru the motions of setting it up again, but in settings/about only 3GB was free)
So I flashed the stock ROM again from RUU not gold card (last time I did it thru gold card) upon completion, I set it back up, sync a couple songs and pics to it and I reboot it, no problem. So I sync some more to it, no problem after reboot. so I'm thinking it's good. So I do a FULL sync and install a few apps, then reboot. all good!
Then I install a few more apps and all have a problem and say needs attention, click here. I do and retry, but failed on all of them. so I reboot the phone (knowing what was gonna happen) well, this time it sat on good bye forever, never completely shut down, so I take the battery out and put it back in and start it up and for the first time it hangs on the HTC screen. So I go into SPL mode then try to boot again, hangs still. So I go back to SPL and so factory reset and now Im setting my phone up for the 3rd time today!
Any ideas?
Click to expand...
Click to collapse
Geez, it seems that 98% of people who have the ATT Titans are having problems. I guess I must've lucked out when everything went A ok for me. I haven't been reading lately, so I am assuming you tried to debrand the device first by flashing the Euro stock rom? Did you try to upgrade the SPL to 2.6 from the HTC website?
Anyway, alright you said you flashed back to stock ROM -this is the ATT rom I'm assuming right? If so, try flashing BACK to the EURO rom. And do it through goldcard. After flashing the Euro rom...do a hard reset and see if it boots normally. Then I would try to upgrade the SPL again? to 2.6. If that doesn't work. Try to flash BACK to the ATT rom...do a hard reset and see if it works.
Wow, I must say that this is the craziest thing I've ever seen! It just reset again! This time. I was syncing an auto playlist (And I knew it was gonna be jacked up when the device summary screen had this "just removed from device (1 item)" and upon opening that up to see what was in it, it was blank!) and my wife sent me a text, I tried to unlock the screen, and it wouldn't unlock, in fact it seized the device up. The lock screen was partially slid up and stuck. So I waited with no luck.
I unplugged from PC and took battery out, then booted it back up. It took forever to boot up and was presented with setting up device for first time use (I figured). When I did and I get that same new device setup text, I noticed that there were still texts from yesterday in there and went to home screen and all my tiles from apps were still there but I when I tried to launch any of them, the screen just started to animated as if it were about to launch the app, then stopped. So couldn't launch anything.
I'm thinking that there is something with my zune setup doing this. So this time, I am booting my PC into Windows 8 and installing zune and try to sync the same content and see what happens!
Now before Mango, sometimes when I downloaded albums with zune pass on my HD7, some songs would lock up the phone. Meaning that the music would suddenly stop playing and if I hit play, skip, next or even played new playlist, it would seize the phone and force a reboot. I still have those songs on my PC and they play fine on the PC and the phone now since Mango, but zune did freak out a few months ago and created this random playlist named ".rcszasdfaskl23" some weird name starting with a ".rcs" and in that playlist were those songs that caused the phone to seize. The weird thing about this playlist is, it is in zune as content, but it is not listed in the playlist folder in windows explorer.
Any way, I'll report back after syncing with Win 8.
GreenGrenadez said:
Wow, I must say that this is the craziest thing I've ever seen! It just reset again! This time. I was syncing an auto playlist (And I knew it was gonna be jacked up when the device summary screen had this "just removed from device (1 item)" and upon opening that up to see what was in it, it was blank!) and my wife sent me a text, I tried to unlock the screen, and it wouldn't unlock, in fact it seized the device up. The lock screen was partially slid up and stuck. So I waited with no luck.
I unplugged from PC and took battery out, then booted it back up. It took forever to boot up and was presented with setting up device for first time use (I figured). When I did and I get that same new device setup text, I noticed that there were still texts from yesterday in there and went to home screen and all my tiles from apps were still there but I when I tried to launch any of them, the screen just started to animated as if it were about to launch the app, then stopped. So couldn't launch anything.
I'm thinking that there is something with my zune setup doing this. So this time, I am booting my PC into Windows 8 and installing zune and try to sync the same content and see what happens!
Now before Mango, sometimes when I downloaded albums with zune pass on my HD7, some songs would lock up the phone. Meaning that the music would suddenly stop playing and if I hit play, skip, next or even played new playlist, it would seize the phone and force a reboot. I still have those songs on my PC and they play fine on the PC and the phone now since Mango, but zune did freak out a few months ago and created this random playlist named ".rcszasdfaskl23" some weird name starting with a ".rcs" and in that playlist were those songs that caused the phone to seize. The weird thing about this playlist is, it is in zune as content, but it is not listed in the playlist folder in windows explorer.
Any way, I'll report back after syncing with Win 8.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1386926 this sounds like the problem you're having. There might be something useful on there!
Good luck!
I was just about to update this and say I think that it is a memory capacity issue! That's exactly it. Thanks eeeelliott
Sent from my PI39100 using XDA Windows Phone 7 App
xconomicron said:
Geez, it seems that 98% of people who have the ATT Titans are having problems. I guess I must've lucked out when everything went A ok for me. I haven't been reading lately, so I am assuming you tried to debrand the device first by flashing the Euro stock rom? Did you try to upgrade the SPL to 2.6 from the HTC website?
Anyway, alright you said you flashed back to stock ROM -this is the ATT rom I'm assuming right? If so, try flashing BACK to the EURO rom. And do it through goldcard. After flashing the Euro rom...do a hard reset and see if it boots normally. Then I would try to upgrade the SPL again? to 2.6. If that doesn't work. Try to flash BACK to the ATT rom...do a hard reset and see if it works.
Click to expand...
Click to collapse
Hey xconomicron,
What were your exact steps that you followed? This is the first time that I heard an ATT Titan owner installing a Euro ROM first. I ordered all of the parts to install using y-cable but I'd rather install via software only.
Never mind. found the answer I was looking for. Sry.
@xconomicron
Thanks for reply. Upon receiving my y-cable and having my gold card all ready to go with the DFT SPL (2.05) on it. It did that first (just as all the directions said to do) after success, I tried the HSPL. The PC screen said success, but the Titan said otherwise. It comes back to SPL2.5 (really 2.05 but showing 2.5), This SPL will not allow ANY other ROM other than US Cingular 1.10 to be flashed (I've tried them all Gold Card method or RUU method). I've tried the HTC SPL 2.6 and it too says success, but the phone says NOPE!
So, I'm stuck with this AT&T crapy ROM that is locked out and the only thing I can do is force update it to 8107 (which only keeps the keyboard from disappearing as far I can tell). And now only to find out that my phone also has this memory capacity problem (when I fill it beyond 70% the phone freaks out and must do a hard reset to remedy).
I know that Cotulla is working on the SPL thing (asked for testers last week) and if I can, I plan to hold out to see if a custom ROM fixes this memory problem.
Thanks
You have to install HSPL to flash custom ROMs. Its in the Windows Phone Development forum as DFT HTC Second Gen HSPL or something
Sent from my TITAN X310e using XDA Windows Phone 7 App
I realize that, but for whatever reason, mine and a few other AT&T Titans will not accept the HSPL. The SPL 2.05 will not downgrade back to 1.10 or accept HSPL or OSPL or custom ROM or EUR ROM. I've tried all by gold card and RUU.
Sent from my PI39100 using XDA Windows Phone 7 App
So you're having an issue flashing the compatible SPL with GoldCard?
There have been many problems with that. Make sure you made your GoldCard correctly and the cable configuration is correct. Y USB cables usually have one thinner wire, and usually carries only power, so it's most likely that the power will go there. Then the SD card (or flash drive) and phone go in the other two. Mine worked with the power on the thin wire, phone on the middle port that's connected to both, and the flash drive on the other end. This wasn't the configuration in the GoldCard thread, so the guide's might not work. Really, there's I think 6 possible configurations so it wouldn't hurt to try them all.
Good luck!
Sent from my TITAN X310e using XDA Windows Phone 7 App
GreenGrenadez said:
I realize that, but for whatever reason, mine and a few other AT&T Titans will not accept the HSPL. The SPL 2.05 will not downgrade back to 1.10 or accept HSPL or OSPL or custom ROM or EUR ROM. I've tried all by gold card and RUU.
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I believe that this issue with AT&T Titan arises for those who directly flashed (through goldcard) DFT spl 2.05. Once the DFT spl 2.05 rom is installed there is no way of going back to stock cingular rom spl 1.10 or ability to debrand phone to euro version (even goldcard method will not work). Debranding At&t Titan to Euro rom v2.5 first before flashing the DFT spl2.05 is the best route to take, it also ensure that the phone is fully compatible with all the known custom roms, except for nhathoa rom, all are based on euro rom and radio version.
rgencarn said:
Hey xconomicron,
What were your exact steps that you followed? This is the first time that I heard an ATT Titan owner installing a Euro ROM first. I ordered all of the parts to install using y-cable but I'd rather install via software only.
Never mind. found the answer I was looking for. Sry.
Click to expand...
Click to collapse
It would be in your best bet to go and read the other threads. One in particularly...
http://forum.xda-developers.com/showthread.php?t=1693334
Basically, MOST ATT branded devices are having problems installing the DFT 2.5 SPL+HSPL. In fact, those that have tried to directly flash DFT's 2.05(2.5) SPL -without debranding the device to the EURO rom listed in the link- are usually stuck on the 2.5 SPL without being able to flash anything else at all. -Which means, no installing roms, upgrading/downgrading SPL's.
The steps I used are on that thread. Habnzrot has also listed the steps he used to successfully debrand his device and install DFT's HSPL/Custom Rom.
Follow the steps carefully...Debranding your device is your number one priority BEFORE doing anything else!
If you need any help just ask.
Okay guys. I think somebody should post a thread that explains how to install the original OSPL and stock rom to their device. Many are having issues. I have this memory capacity issue myself. I hard reset my phone at least 3 times a day.
Could anybody WHO knows how to install stock OSPL and rom post a guide for that? I would be very glad if somebody could.
I have started this thread "Install OSPL(and original rom) after installing any custom rom with HSPL." in Titan windows phone development. I hope you guys will participate in that thread.
Thanx

Categories

Resources