I have upgraded my SPV M3100 Orange to official HTC WM6 with SPL-2.10.Olipro. I have radio 1.47. I try to upgraded to radio 1.50 or 1.51 but when i push button Autodetect i hace this message: "Unknown version. You must select SSPL".
Can i select Force Using SSPL and continue without problems? Or must I select SPL 2.02/2.10 New Bootloader? Or i have any other problem that i have to solve before upgrading radio?
Another question: I think that IMEI has changed with the WM6 upgrade, is it possible? is possible that it has an IMEI with Orange ROM and another one now with HTC ROM? if yes, is there any problem?
False problem with IMEI
Excuse me. Probably i make a mistake when i write my IMEI first time, because the IMEI that i have it is the same that the one in the battery stick.
So, it is no problem with IMEI
Related
Hy at all,
I have one MSPV M3100 and i upgrate this to WM6 Xda-Live 0.20.1 ROM. This rom woek perfectly but my telephone run very bad.
Y have this version:
ROM: WM6 Xda-Live 0.20.1
Radio ROM: 1.16.0.0
Bootloader: SPL 1.06
I want upgrade my Radio Rom to 1.27 version, but not it with himself. I have tried 4 times, and always the same error. ERROR 114= Upgrade error.
I have followed these instructions:
Upgrade instructions
1. Extract the contents of the compressed file you've just downloaded
2.Run MaUpgradeUt_noID.exe
Description for Radio 1.11 shows ver 0.70, but don't worry about it, it is really 1.11
3. The Hermes screen will turn white and show "Upgrade Radio Stack Please wait........."
4. If you get a "ERROR 120: COUNTRY ID ERROR", do not disconnect the device, run MaUpgradeUt_noID again.
5. The upgrading process will start and MaUpgradeUt_noID.exe will end up saying "ERROR 114: Upgrade Error", but the radio ROM will be flashed anyway, don't worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
that I have done badly?
as I have it to do?
Sorry for my english, is very bad.
Thanks a lot of for your answers.
By.
You need to prep the bootloader. I will go find the link.
Here is the wiki link. This should get you started. I am in the process of downgrading from 1.35 to 1.27 right now. lol
I have the Oliman 1.10 and ipl is 1.01. Search for hard spl and you will have it all.
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Before you flash the radio it is a good idea to use Hard-SPL so if the flash goes wrong the phone can be recovered.
pardon, but what is Hard SPL??
Is a program??
how I prepare the bootloader??
thanks
You Need to use SSPL. Look for Radio Files with SSPL in the WIKI.
Hello,
I must make downgrade to a ROM with the version SPL 1.04 to be able to
change to my radius ROM?
That is what me say?
Thanks.
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
LegolasTheElf said:
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
Click to expand...
Click to collapse
Hello,
Pardon. It does not form well my profile. I have two mobile. One Hp 6815 with Movistar and one SPV M3100 with Orange.
Pardons but I do not understand.
How I can obtain superCID?
I want to put the RADIO ROM 1.27.0.0 SSPL that this here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
What I must do first?
Downgrade to a ROM with SPL 1.04 or Change to SuperCID.
Thanks for reply.
By.
Hey Meodio_99, sorry but you are a classical case of someone who is going to end up with a bricked (dead) phone. You have a disadvantage as your English does not appear to be very good but you need to both read AND understand otherwise sooner or later you will end up with a bricked phone.
I suggest you read all the WIKI sections talking about upgrading and also http://forum.xda-developers.com/showthread.php?t=296722 and http://forum.xda-developers.com/showthread.php?t=286755
It might take you an hour or so but it might also prevent you from crying yourself to sleep at night because you killed your Hermes!
Hello all,
unfortunately, my prophet has been broken by the well known ROM update SPL 3.08. The exact name of this file is: Jesterzs_Aku2.20_with_3.08IPL_and_2.20SPL_ONLY_FOR _G4_
So the current situation is:
IPL 2.09
SPL 3.08.0001
I am looking for a solution. The ideal one would be:
upgrading again with a valid SPL but greater version number (such 3.09).
The second step is to unlock the CID (No problem for that),
and finally downgrading everything to ROM 2.20 (Easy).
By now, I create a modified 2.20 SPL to 3.09. Please check attached.
But the ROM update seems to not work. Indeed at the end of the operation, the prophet shows a wonderful screen with degraded green and the following words:
IPL 2.09
SPL 3.08.0001So, I can conclude that the first step is not sucessfull.
When the ROMUpdateUtility_G4.exe check the version number, the version of the prophet seems to be empty...
Does anyone have any idea?
thank you for your comment.
cheers
Andre
do u think this is possible ??
and waht is the difference betwen the towo verssion ??
well, what can you do with a prophet upgraded to 3.08? nothing.
my problem would be dissambling the SPL and IPL for changing the version.
Modifying directly the binary doesn't work.
seeya
hi
I have a phone brought from ebay and flashed it with schaps newest rom, upgraded the radio and installed hard spl and used it for 4 weeks before it was barred. T mobile said it was a bad flash and to reflash it with the official firmware. I have done this numerous times. My imei has changed. It now says it is a number with a lot of 0's that doesnt match the back of the phone or it says 'failed', when i type *#06#. What has changed the imei and how can i get it back?
please help
thanks in advance
flashing will not change the imei at all, whether its hardspl or a rom
Check with *#06# if your imei has changed to 35519500000001701. This is a default imei, and usually happens when the security area of the device is damaged.
great
the mighty pof!!!!
Mr POF
can u help us unbrick the hermes with spl 2.03 ipl 1.04 NO GSM NO KITL NO CID????
yeh thats what its changed too. Is there anyway i can fix the security area? Please help and thanks
which radio version are you running?
1.41.00.10 i used the upgrade tutorial on mrvanx's htc site for the schaps rom
should i try a radio upgrade then do you think? if so what to? thanks
Hi,
i must sent my hermes to repairs. so i have to restore it to wm5 and old bootloader.
i have some problems with the gsm module. sometimes i get "no gsm" in the bootscreen and after boot no phone functions. Some time i the radio shows up in boot and i get phone functions. the problem did not appear after a flash. the last flash a month ago.
it seems that the hardware that there is a loose connection. when i make a test call and knock the phone (softly) the phone connection is lost. the "end call" button does nothing and after a while the whole os freezes.
has someone another idea than faulty hardware?
OS is restored to original with the help of mrvranx guide.
whats left is the bootloader and the shipped radio rom.
Bootloader screen shows:
Herm 300
IPL-1.04
SPL-2.10Olipro
Radio Rom is 1.47.30.10
Im a little concerned about mrvranx warning: "If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error"
but on the next page is a guide to flash the bootloader back step by step to the original. is this method save? and does anybody know which one was the shipped one (t-mobile germany).
last the radio. i can't remember which was the shipped version.
and can i flash whithout problems back to the original? somewhere i read about problems because of the bootloader.
and the last question
in what order must i do this. first radio then the bootloader is right?
many thanks in advance.
washi
just today I had to get my old TYTN ready for warranty/repair.
I followed mrvranx's guide to downgrade my bootloader and it worked flawlessly. I did it all from an XP computer as I was having issue on my Vista machine. Follow it to a T and you should not encounter trouble.
As for the order, I don't think it matters. I did my radio last if you just wanna follow my lead.
As for determining the radio and boot loader version - I'm with Rogers in Canada, they send me my replacement device before I send them the faulty one. I just go into bootloader mode (power on the right side+ok on the left side+reset button at the bottom) and verify the version.
just checked my radio bootloader version. its 108.
so i wont be able to flash a radio < 1.3x?
which is unfortunate because the t-mobile germany never actually offered an official update :/
i just hope the handy will pass with the old os and old bootloader but newer radio.
Is this really needed?
I have to send my phone in as well and didn't know if it was really necessary to do all the downgrading and stuff? i guess can't hurt to be safe though huh
Hey Guys,
I am in the same boat as you all, I am with Rogers and unfortunately MRVANX guide is not online at present, can any one help. Also if you can tell me if it is at all possible, my IPL is 1.04, SPL is 2.10.OLIPRO and Radio version is 1.54.07.00 I am using FARIA.32 ROM
please help.
Thanks
Himanshu
Hi.
I recently got a wizard a9100, now i'm having problems with the signal.
when signal is lost (ie. when in a basement or tunnel) and i return to a signal spot, the signal indicator keeps showing the "searching" dots and never get the signal bars.
I have to insert the sim card in another phone, get signal in the new phone and then reinsert it into the wizard.
I'm sure it's not the sim card because it never happened with my old phone.
Should I update the radio firmware?
where could I find the radio update? (my network is Colombia)
the wizard config is:
IPL: 2.26.0001
SPL: 2.26.0001
GSM: 02.25.11
OS: 6.1.0.0
Thank You
bump
i think the main question is can we flash any radio in that g4?
i have one with me with an old radio 2.07.10
can i upgrade it safely?
anyone??
thx
evildarknight said:
bump
i think the main question is can we flash any radio in that g4?
i have one with me with an old radio 2.07.10
can i upgrade it safely?
anyone??
thx
Click to expand...
Click to collapse
Yes, I did Upgraded to 2.69.11 and 2.47.11 and downgraded to 2.19.11 (originally had 2.25.11)
That did not solve my problem, but answers your question
To flash it, I had to generate a rom with Extension Rom, OS and GSM
(about 79Mb)
maybe you need to flash the original official rom that came with it to solve your problems on the niki forum they always advise to do that after some reflashing