Hy at all,
I have one MSPV M3100 and i upgrate this to WM6 Xda-Live 0.20.1 ROM. This rom woek perfectly but my telephone run very bad.
Y have this version:
ROM: WM6 Xda-Live 0.20.1
Radio ROM: 1.16.0.0
Bootloader: SPL 1.06
I want upgrade my Radio Rom to 1.27 version, but not it with himself. I have tried 4 times, and always the same error. ERROR 114= Upgrade error.
I have followed these instructions:
Upgrade instructions
1. Extract the contents of the compressed file you've just downloaded
2.Run MaUpgradeUt_noID.exe
Description for Radio 1.11 shows ver 0.70, but don't worry about it, it is really 1.11
3. The Hermes screen will turn white and show "Upgrade Radio Stack Please wait........."
4. If you get a "ERROR 120: COUNTRY ID ERROR", do not disconnect the device, run MaUpgradeUt_noID again.
5. The upgrading process will start and MaUpgradeUt_noID.exe will end up saying "ERROR 114: Upgrade Error", but the radio ROM will be flashed anyway, don't worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
that I have done badly?
as I have it to do?
Sorry for my english, is very bad.
Thanks a lot of for your answers.
By.
You need to prep the bootloader. I will go find the link.
Here is the wiki link. This should get you started. I am in the process of downgrading from 1.35 to 1.27 right now. lol
I have the Oliman 1.10 and ipl is 1.01. Search for hard spl and you will have it all.
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Before you flash the radio it is a good idea to use Hard-SPL so if the flash goes wrong the phone can be recovered.
pardon, but what is Hard SPL??
Is a program??
how I prepare the bootloader??
thanks
You Need to use SSPL. Look for Radio Files with SSPL in the WIKI.
Hello,
I must make downgrade to a ROM with the version SPL 1.04 to be able to
change to my radius ROM?
That is what me say?
Thanks.
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
LegolasTheElf said:
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
Click to expand...
Click to collapse
Hello,
Pardon. It does not form well my profile. I have two mobile. One Hp 6815 with Movistar and one SPV M3100 with Orange.
Pardons but I do not understand.
How I can obtain superCID?
I want to put the RADIO ROM 1.27.0.0 SSPL that this here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
What I must do first?
Downgrade to a ROM with SPL 1.04 or Change to SuperCID.
Thanks for reply.
By.
Hey Meodio_99, sorry but you are a classical case of someone who is going to end up with a bricked (dead) phone. You have a disadvantage as your English does not appear to be very good but you need to both read AND understand otherwise sooner or later you will end up with a bricked phone.
I suggest you read all the WIKI sections talking about upgrading and also http://forum.xda-developers.com/showthread.php?t=296722 and http://forum.xda-developers.com/showthread.php?t=286755
It might take you an hour or so but it might also prevent you from crying yourself to sleep at night because you killed your Hermes!
Related
Japanese ROM from DoCoMo hTc Z has been uploaded to XDA-Developers FTP and added to the Hermes wiki, you can find it under the Available Original Shipped ROM Versions.
Notes on this ROM:
ROM Version: 1.23.731.2 06/24/06
Radio Version: 1.06.00.10
Bootloader: 1.04
Language: JPN (Japanese)
CID: DOCOM801
As you can see this is nothing new, but I guess it will be useful for people with this CID to be able to downgrade to bootloader 1.04.
Enjoy
Hi pof,
Thanks for that. I tried this to flash my X01HT after unlocking it with imei-check but with no luck. RUU went successufully till the last screen and I hit the upgrade but it returned an error saying something like this RUU cannot be used for the device. Bootloader is now 1.04 and the device should be SuperCID with imei-check. The only thing I can think of is that I upgraded the radio to your 1.2. Would that screw SuperCID? I appreciate your advice in advance.
Thanks,
harryk
harryk1372: If you are in 1.04 bootloader just run the upgrade utility again without disconnecting the device or start the upgrade in bootloader mode to bypass CID checking.
If it is really SuperCID then you shouldn't have seen this error.
Hi pof,
Thanks very much for getting back to me so quickly.
I ran the upgrade in the bootloader mode. I thought that I don't have to run it twice if the device is already at the SuperCID state and didn't run the update twice. I'll try it again when the device is fully charged as the battery is now down to like 30%.
I'll post the result again when I am done. Thanks again for your prompt advice. You're the man and I really appreciate your efforts taking us thus far in cracking Hermes.
Regards,
harryk
Hi pof,
The device looks like it was not in the SuperCID state and RUU went fine with the second run with no error. However, the upgrade failed when it hit exactly 47% no matter how many times I tried it. Lucky that I did not brick my device but of course it seemed to lack some of the components and it did not even have the Connections setting to set up the Internet access. Also, AutoRun and cabs in the ExtRom didn't take any effect either although the cab files were there.
I decided to flash the TyTN ROM instead and that was successful. That is fine as I only use Japanese occasionally and I didn't really want the Japanese MUI so I will keep it as is. Perhaps I will tweak it a little to be able to use Japanese with loading the Chinese nls, Japanese font, Japanese IME and so forth just like I did with my Universal.
Thanks again.
harryk
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
fyi...
http://forum.xda-developers.com/showthread.php?t=283177&page=2&highlight=qtotter
I always downgrade my JASJAM using I-Mate shipped ROM
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
i use the docomo rom on my x01ht. it's ok. i have no problem with it at all.
a friend of mine uses a sim-unlocked x01ht (/w the original s/b rom) with sb_usim, but she does not get such a msg at all. do you use a s/b sim?? if yes, i suppsoe you did something wrong...
X01HT Unlocking Problem
I've got this X01HT a few days ago from S/B shop but when I tried unlocking it the result was no good using my cable. I read from other site that X01HT released from December 2006 cannot be unlocked. Please give me some clarifications on this and also, is FLASHING on lower rom version even in english version can resolve the problem...? Your response will so much appreciated.
Thanks in advance.
At the moment it's not possible to unlock X01HT devices wich where bought after 12/1/2006 and have bootloader version 1.09 and RadioROM version 1.14.0.10! Please be patient.
To the experts, I need some advice. I intend to get a X01HT, already unlocked and flashed with the dopod 838 pro firmware. However, I intend to flash back the Japanese shipped rom :
RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip
What are the requirements esp where :
Bootloader (SPL)
Latest Radio Bootloader (HTC_BOOT)
Or since its unlocked, do I just go to the bootloader mode and flash direct? Any side effects if I do so, since its changing from an english rom of another clone (Dopod 838 pro, WM6)?
I am not even sure if the RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip rom is WM5/6. Please advice, thanks..
Hi Guys,
I am not that sure do I post in wrong platform, since here is for upgrade stuff.
Actually I have upgraded my device to WM6 last week but it 's working not so nice for me. My Service Provider doesn't recognize my device as a 3G mobile, it thought my X01HT is a 2G mobile, so it doesn't show up what it should be when I am connecting to their front pages.
And WM6 always hangs even I do not install any programs (but only the keyboard fix)
Also, I was not able to receive incoming call when my X01HT enable HSDPA, I hope it could be fixed after radio and ROM upgrade however it could not actually.
Therefore I am thinking to downgrade to WM5 Eng ROM. And i have read both mrvanx guide and some from other forums. There are couple things which make me confused.
1. Some people said we must have Hard SPL v7 and SuperCID ready for downgrade but mrvanx 's guide only mention the HardSPL v7.
2. when we use dutty's tool to make the nbh file, do we need to type in "device" (eg. HERM100 or HERM 200) and "CID Type" (say, SuperCID)?
Many Many Thanks!
kinghung said:
Hi Guys,
I am not that sure do I post in wrong platform, since here is for upgrade stuff.
Actually I have upgraded my device to WM6 last week but it 's working not so nice for me. My Service Provider doesn't recognize my device as a 3G mobile, it thought my X01HT is a 2G mobile, so it doesn't show up what it should be when I am connecting to their front pages.
And WM6 always hangs even I do not install any programs (but only the keyboard fix)
Also, I was not able to receive incoming call when my X01HT enable HSDPA, I hope it could be fixed after radio and ROM upgrade however it could not actually.
Therefore I am thinking to downgrade to WM5 Eng ROM. And i have read both mrvanx guide and some from other forums. There are couple things which make me confused.
1. Some people said we must have Hard SPL v7 and SuperCID ready for downgrade but mrvanx 's guide only mention the HardSPL v7.
2. when we use dutty's tool to make the nbh file, do we need to type in "device" (eg. HERM100 or HERM 200) and "CID Type" (say, SuperCID)?
Many Many Thanks!
Click to expand...
Click to collapse
http://www.mrvanx.org
walshieau said:
http://www.mrvanx.org
Click to expand...
Click to collapse
I have read it couple times, and that's why I have these 2 questions.
(Q1. HardSPL v7 already have SuperCID? Q2. Using Dutty's tool, is it needed to Type "Device" and CID Type"?)
Thanks anyway!
I have a jasjam
i was upgrading it using the telstra WM6 rom.
during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
it the first splash screen it shows no gsm
it only shows the bootloader menu
IPL 1.04
SPL 2.03
i read the wiki on how to unbrick a bricked hermes but there is no sulotion
plzzzzzzzz
anyone can help me??????
koorosh_bsboys said:
I have a jasjam
i was upgrading it using the telstra WM6 rom.
during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
it the first splash screen it shows no gsm
it only shows the bootloader menu
IPL 1.04
SPL 2.03
i read the wiki on how to unbrick a bricked hermes but there is no sulotion
plzzzzzzzz
anyone can help me??????
Click to expand...
Click to collapse
Did you also read the wiki to see how to install hardspl to protect your device BEFORE flashing ?(here: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )? Are you using Olipro hardspl?
Try to use the SDCARD method (Format a sdcard in FAT32. Copy the nbh file on it and rename it HERMIMG.NBH. Insert the card and HR : OK/POWER/Soft reset. Follow the instructions)
i tested that but didn't help
does anybody have any suggestion??
Try solution to reeboot ( sometimes helps)
1. get out SIM and SD card
get mtty http://forum.xda-developers.com/download.php?id=9864
2. Make BL mode on Hermes
2a on PC ActiveSync - coonection properties untick allow to connect by USB
3. start mtty on PC , choose USB and enter.
4. next enter.
5. type set 14 and enter
6. type task 8 and enter
OS have to boot if no go to 7
7. enter
8 type set 16 and enter
9. type task 8 and enter
Hope that will boot
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Pretty much all the info on unbricking is in this table by Pof. If this doesn't sort you out then you're have to send it off to imeicheck etc for repair.
The history so far
I have bricked my jasjam while updating to telstra wm6
I have not super CID my device before upgrading to telstra wm6
Now my device freezed at second splash screen
IPL 1.04
SPL 2.03
NO GSM
when i used the info 6 command on mtty it says NO CID
i can not upgrade my device from SD CARD (memory stick)
i used these command on MTTY.exe but no improvement
set 14
task 8
set 16
task 8
when i tried to rom upgrade using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
any suggestions????
I hope you understand this, Basically if
1. You have a "No GSM"
2. Your CID is corrupted
3. Your OS has no KITL mode
4. You didn't use HARDSPL...
Then your phone is screwed, and you need to buy a new one or send it to repair.
Hope you have better luck with your next phone. (you seem to be collecting bricked phones!)
Wam7 said:
4. You didn't use HARDSPL...
Click to expand...
Click to collapse
That's the BIGGEST mistake u ever made with ur Jasjam, bro
try to send to repair centre, if repair cost is too much. Than u have to decide try but new gadget. Kaiser looks flirt to me
yep im glad i waited to upgrade from the proper wm5 to the proper wm6
st3v3 said:
yep im glad i waited to upgrade from the proper wm5 to the proper wm6
Click to expand...
Click to collapse
Did u mean, u stay at proper WM5 or already Flash to WM6 ?
I think everything is save IF we read carefully the disclaimer from the author
ermenzegna said:
Did u mean, u stay at proper WM5 or already Flash to WM6 ?
I think everything is save IF we read carefully the disclaimer from the author
Click to expand...
Click to collapse
The offical I-mate telstra Jasjam rom for WM6 came out recently previous to that i just kept the original WM5 rom that it came with much to the dismay of my peers, actually considered it a few times but decided against it till the official rom came out.
yeah if you follow the instructions for the WM6 rom you use it should be ok however the "Murphys law" of programming tends to suggest there will always be an error that they dont allow for.
st3v3 said:
The offical I-mate telstra Jasjam rom for WM6 came out recently previous to that i just kept the original WM5 rom that it came with much to the dismay of my peers, actually considered it a few times but decided against it till the official rom came out.
yeah if you follow the instructions for the WM6 rom you use it should be ok however the "Murphys law" of programming tends to suggest there will always be an error that they dont allow for.
Click to expand...
Click to collapse
This has NOTHING to do with only using official Roms! One has pretty much the same chance of bricking their phone evening using an official WM6 as a cooked variant from Schaps et al..
Simply put if you don't use HardSPL then you're asking for trouble no matter what the ROM. You should also use the MicroSD wherever possible as it is much more reliable.
imei check use jtag to fix this
imei check use jtag to fix this ,CAn we use jtag to fix this in hermes. need help to resovle spl 2.03 cid locked no gsm.
I Have read allot of data, unbrick tutorials and upgrades suggestions...
but I Still haven't found what is the correct upgrade stages.
As far as I have read from the unbrick suggestions, I've reached to the following order:
1) Upgrading SPL (Enabling KITL)
2) Unlocking
3) Upgrading radio
4) Upgrading Windows
Can someone confirm or recommend/add other steps ?
During the upgrade steps, will the HERMES be usable ?
Unlock first THEN hard spl.
DONT mess with your radio if it works fine, as this is part that can COMPLETELY brick your phone(you may be able to use as a PDA but not gonna be a phone EVER again.)
Load an os(either a stock one OR one of the cooked roms our TOP chefs cook up.), most come as OS only, no radio.
Hope this helps.... Cheers
It is useless for me, I cannot unlock the phone, due to different locking technique.
there are few posts about a locked Jasjam, with no olutions.
all the unlocking process went well, 3 times...
after the unlock process, when I insert the sim, it connects to the network, (indicated with 5 lines) and after about 5 seconds, it disconnect and says :
"The system detected an invalid SIM card"
and asks for unlock code.
now I have the following versions:
IPL 1.01
SPL 1.40.Olipro
Radio 1.16
any ideas ?
The Solution
To unlock Cellcom (Israel) JASJAM, As weird as it sounds, you should disable/deactivate/uninstall/whatever the EYRON Multi language support, which comes pre-installed.
I'll let the experts explain it.
I Dont know if it works for Orange-il Tytn too.
please consider note this in unlock guide ?
Now, which version of HARD-SPL with KITL should I Install... (Link will be helpful)
Please note that I Only Unlock the SIM, and not SuperCID, the .BAT file of the unlocker says:
"CID Unlock: will make your phone SuperCID forever, don't check this if you are unsure. HardSPL will do same effect without loosing warranty."
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
ultramag69 said:
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
Click to expand...
Click to collapse
I have upgraded to Olipro V7
When I Boot into bootloader, I see:
IPL-1.04
SPL-2.10.Olipro
But I Still not get any sign of KITL according to this threat (Step 5).
The Device is booting normally, as if I'm not holding any bottons.
How can I check if KITL enabled ?
Do I need KITL while using OLIPRO V7 ?
Orenk,
Have you read the Mr Vanx guides or the wiki? Here are the links:
http://www.mrvanx.org/cms/
http://wiki.xda-developers.com/
WB
hi I am a new consumer and I have an orange spv m3100.. you excuse my English but I am Italian..
my problem is that this telephone always shows no gsm and there is no way to resolve it. if I try to put a radio it jams to the 0% I don't have guarantee the only possible thing it is flashiarlo it is the part of the operating system...
orange spv m3100
ipl 1.04
spl 2.10 olipro
no radio thk
uuuppp hheellpp me!!!
Try to flash the Shipped rom - the rom it originally came with. You can also try just the radio rom (I'd try after the shipped rom though). If these 2 things don't work then it is because the radio rom area of memory has been corrupted... Long story short, flash an os only rom on and you have a PDA you can use but you wont EVER be able to use as a phone again.... Sorry...
Make sure you have Hard SPL installed first as flashing the radio rom is the riskiest thing to do, & if you want any chance of recovery, you should have this installed...
Cheers...& good luck...
thanks for his/her answer even if I have understood few being Italian.... cmq I have already put above a hard spl and I don't succeed equally to perform the flash