Hi Guys,
I am not that sure do I post in wrong platform, since here is for upgrade stuff.
Actually I have upgraded my device to WM6 last week but it 's working not so nice for me. My Service Provider doesn't recognize my device as a 3G mobile, it thought my X01HT is a 2G mobile, so it doesn't show up what it should be when I am connecting to their front pages.
And WM6 always hangs even I do not install any programs (but only the keyboard fix)
Also, I was not able to receive incoming call when my X01HT enable HSDPA, I hope it could be fixed after radio and ROM upgrade however it could not actually.
Therefore I am thinking to downgrade to WM5 Eng ROM. And i have read both mrvanx guide and some from other forums. There are couple things which make me confused.
1. Some people said we must have Hard SPL v7 and SuperCID ready for downgrade but mrvanx 's guide only mention the HardSPL v7.
2. when we use dutty's tool to make the nbh file, do we need to type in "device" (eg. HERM100 or HERM 200) and "CID Type" (say, SuperCID)?
Many Many Thanks!
kinghung said:
Hi Guys,
I am not that sure do I post in wrong platform, since here is for upgrade stuff.
Actually I have upgraded my device to WM6 last week but it 's working not so nice for me. My Service Provider doesn't recognize my device as a 3G mobile, it thought my X01HT is a 2G mobile, so it doesn't show up what it should be when I am connecting to their front pages.
And WM6 always hangs even I do not install any programs (but only the keyboard fix)
Also, I was not able to receive incoming call when my X01HT enable HSDPA, I hope it could be fixed after radio and ROM upgrade however it could not actually.
Therefore I am thinking to downgrade to WM5 Eng ROM. And i have read both mrvanx guide and some from other forums. There are couple things which make me confused.
1. Some people said we must have Hard SPL v7 and SuperCID ready for downgrade but mrvanx 's guide only mention the HardSPL v7.
2. when we use dutty's tool to make the nbh file, do we need to type in "device" (eg. HERM100 or HERM 200) and "CID Type" (say, SuperCID)?
Many Many Thanks!
Click to expand...
Click to collapse
http://www.mrvanx.org
walshieau said:
http://www.mrvanx.org
Click to expand...
Click to collapse
I have read it couple times, and that's why I have these 2 questions.
(Q1. HardSPL v7 already have SuperCID? Q2. Using Dutty's tool, is it needed to Type "Device" and CID Type"?)
Thanks anyway!
Related
Hy at all,
I have one MSPV M3100 and i upgrate this to WM6 Xda-Live 0.20.1 ROM. This rom woek perfectly but my telephone run very bad.
Y have this version:
ROM: WM6 Xda-Live 0.20.1
Radio ROM: 1.16.0.0
Bootloader: SPL 1.06
I want upgrade my Radio Rom to 1.27 version, but not it with himself. I have tried 4 times, and always the same error. ERROR 114= Upgrade error.
I have followed these instructions:
Upgrade instructions
1. Extract the contents of the compressed file you've just downloaded
2.Run MaUpgradeUt_noID.exe
Description for Radio 1.11 shows ver 0.70, but don't worry about it, it is really 1.11
3. The Hermes screen will turn white and show "Upgrade Radio Stack Please wait........."
4. If you get a "ERROR 120: COUNTRY ID ERROR", do not disconnect the device, run MaUpgradeUt_noID again.
5. The upgrading process will start and MaUpgradeUt_noID.exe will end up saying "ERROR 114: Upgrade Error", but the radio ROM will be flashed anyway, don't worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
that I have done badly?
as I have it to do?
Sorry for my english, is very bad.
Thanks a lot of for your answers.
By.
You need to prep the bootloader. I will go find the link.
Here is the wiki link. This should get you started. I am in the process of downgrading from 1.35 to 1.27 right now. lol
I have the Oliman 1.10 and ipl is 1.01. Search for hard spl and you will have it all.
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Before you flash the radio it is a good idea to use Hard-SPL so if the flash goes wrong the phone can be recovered.
pardon, but what is Hard SPL??
Is a program??
how I prepare the bootloader??
thanks
You Need to use SSPL. Look for Radio Files with SSPL in the WIKI.
Hello,
I must make downgrade to a ROM with the version SPL 1.04 to be able to
change to my radius ROM?
That is what me say?
Thanks.
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
LegolasTheElf said:
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
Click to expand...
Click to collapse
Hello,
Pardon. It does not form well my profile. I have two mobile. One Hp 6815 with Movistar and one SPV M3100 with Orange.
Pardons but I do not understand.
How I can obtain superCID?
I want to put the RADIO ROM 1.27.0.0 SSPL that this here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
What I must do first?
Downgrade to a ROM with SPL 1.04 or Change to SuperCID.
Thanks for reply.
By.
Hey Meodio_99, sorry but you are a classical case of someone who is going to end up with a bricked (dead) phone. You have a disadvantage as your English does not appear to be very good but you need to both read AND understand otherwise sooner or later you will end up with a bricked phone.
I suggest you read all the WIKI sections talking about upgrading and also http://forum.xda-developers.com/showthread.php?t=296722 and http://forum.xda-developers.com/showthread.php?t=286755
It might take you an hour or so but it might also prevent you from crying yourself to sleep at night because you killed your Hermes!
Hello all,
I Eb'd an HTC wizard (cingular 8125) running Wizard Love/NBD WM 6.
On the load screen I get:
AKU 2.3;
IPL and SPL:2.25.0001;
radio:2.25.11;
rom: 6.0.0.0.
My carrier is Tmobile.
Question 1: If my phone has this newer ROM and it takes calls on the Tmobile network it has been CID unlocked and SIM unlocked...right?
I wanna update my rom and think that I am competent enough to do so but there is alot to learn and this is not my full time gig...right.
Question 2: So, if I am correct in Q1 I should be able to flash roms right?
However when I attempt to do so the RUU gives me [error 224]. Active sync and or WMDC says its connected. (I installed the AS drivers in WMDC)
Question 3: Where do I go from here?
Question 4: The wi-fi is currently not working will a new rom potentially clear this up?
Thanks in advance for the time and advice..
grazie
hmmmm,
Well,did you updated to NBD wm6 yourself ? and how did you updated ? which method you adopted ? SoftSPL or HardSPL ?
You say its SIM unlocked as it takes calls on the Tmobile network .Did you SIM unlocked with lokiwiz03a ?
yes ! a G4 can be SIM unlocked but it can not be CID unlocked,however,it can be upgraded to wm6 rom,but with method either 'SoftSPL' or 'HardSPL'.With your present ipl/spl 2.25.0001 and you say its NBD wm6 running,then it must have been upgraded through 'SoftSPL' method,as it uses patched ipl/spl and Cid unlocks the phone temporarily,but it never permanently CID unlocks the phone.But with 'HardSPL' ,it changes the ipl/spl to a patched ipl 2.21.0001 and spl 2.21 olip.So everytime you want to upgrade,you'll have to upgrade using 'SoftSPL' method.
could you elaborate a little more about this.
Cheers!
Hey thanks for the correspondence zabardast_1, I have been getting frustrated and I have many times contemplated going for the brick or bust approach here.
So, I have done none of the updating on this rig. I rec'd it and I wanted it primarily for wifi however I can't get the wifi card/ (sdiowlan I believe) to even recognize an AP (... I posted in the networking forum but no response.) Thus my own reasoning leads me to believe I should start from scratch with a new rom unless you know of something else.
So, I am not the most savvy and thought that all of the info I had led to SIM and CID unlocked. I just read otherwise last night and in your reply. The info I have provided is accurate the IPL, SPL, radio, although I don't know which NBD release it is; just says 6.0.0.0 and release date: 2/2/07.
I am trying to get the new rom on the my device however and I would've probably already bricked it if I could get an RUU to communicate with my wiz. I always get [Error 224] when I run it and my phone is connected through active sync. I am running vista but have installed the AS drivers for WMDC. I also tried it at work the other day with XP same situ. I then tried flashing from the bootloader screen with an NBD, Wizard Love ( w/ Italian installer?), and T-mob (226102_22610105_022511). The only one that says it will update is the Tmob ROM, however I got cold feet at the update button and canceled.
Other funny stuff I have observed that may or may not be related to the problems I am having are:
Can't install cab files ie (enable rapi or Cert SPCS) and Wiz Sys Tools couldn't read my CID block and hard_SPL G4 gives me REXX error ( SPL_Version has no value).
So, any wizdom you or anybody can drop is much appreciated and needed at this point.
Whew...
Listen carefully. G4 Wizard cannot be CID-unlocked without paying money. (And yes, you are using a G4).
What you need now is to Flash your original stock carrier ROM (Or wizard love) to get your OS back. Then either use SoftSPL or install HardSPL and flash WM6 ROM.
Thanks Starkwong,
I will try installing wizard love tomorrow at work and if that don't work I will attempt a Cing ROM (will all of these work or do I need to mind my G3's and G4's for these???)
Grazie
So, It worked using Wizard Love at work and out of the bootloader window. Now I need to:
1.) Get wifi working.
2.) Get a newer ROM
I put a post up in the networking thread, I am a tool so far as these devices are concerned so be easy on me.
http://forum.xda-developers.com/showthread.php?t=372811
So do I get the wifi issue resolved before I reflash???
Thx again
I don't know what you mean by "wifi not working".
Maybe it is the wifi AP doesn't allow 11Mbps (802.11b) connections?
However, going to any of the WM6 ROMs should already set the registry to allow Wizard connects to G-Only APs. Just use HardSPL/SoftSPL and flash a WM6 and you will see.
OK so "wifi not working" may indeed be a general statement...
What I mean to say is that I am not able to connect to any wireless networks for internet not home (Linksys WRT 54G v5 with ddwrt firmware) or school (university wide) or my city's wifi network. It won't even detect them at least none that Ive seen since I've rec'd this phone. So, that is what I meant by the ambiguous statement.
So, being as your last post was a success I will try as you say and post the results tomorrow. Thanks again starkwong!!!
1 quick thing however, to be sure, I can now try the hard spl or soft spl method of tricking my phone to run an upgrade to WM6?
Still not able to get wifi APs????
OK although I have been successful at reinstalling the Mfg ROM and then Hard SPL'ing my wizard thanks to ya'll I still am unable to connect to a wireless network (see one even). I have the Olip on my SPL and I installed a TNT version of WM6 and I am still at work (drunk but still here). Anyway I can't see my wireless AP and I am beginning to think its a hardware issue if thats possible, i dunno the dynamics of this system maybe thats why it was for sale. In any event as usual I am willing to try what ever you guys throw at me as you're my only hope obi wan. Alright Im gonna go home for the night and try getting on to my home network.
Thanks again for all the help guys.
Is your device a original one from phone operator? I suspect your device is a China Dopod 838 with replaced casing, because the China version has the wifi hardware removed, so wifi can't be started even if an English ROM is used.
Looks to be authentic 8125
Starkwong, the Cingular logo and the 8125 model # are on the phone case where they have been when I've seen them before in pics. Therfore, I dunno I guess it looks like every other 8125 I've seen. Can I check the SN, IME or anything to be sure?
Thanks Again!!!
Starkwong,
I am getting all the options for wifi on my phone the LHS LED flashes green when I enable it and alternates blue green when BT is enabled. So, could it still be that its a dupod? I dunno but I am going home for the night... Thanks for your help. I will try connecting to my home network when I get there.
Hi everyone,my name's Larry and I just registered to the forums. Please forgive my newness but I am in a bit of a pickle here.
I have a MDA Vario II, aka Hermes 300, that I bought s/h off ebay. Works fine,no worries, but I upgraded to WM6 because i felt browsing was a little slow and the screen graphics werent as good as I expected. The upgrade was from the T-mobile site itself and all went fine. Only thing is I dont believe this phone can handle it(needs more RAM really) and after being online a while it gets really slow,like steerig a cow through treacle at times so I came to the conclusiong it was a bad move! Now I've noticed a link on here about downgrading to WM5 but is it that easy for one with no specialised tools or knowledge(tho i did build my own PC, or should I say ahem WE did)
Also a problem the phone has developed since the upgrade is it keep deleting my email settings, even tho on the 'desktop' screen it tells me i have so many unread emails in each account! So now i cant check emails from it either!
I do hope I can sort this out cos it is really frustrating having a PDA and not being able to browse properly!
Many thanks
Larry
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
scousemartin said:
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
Click to expand...
Click to collapse
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Hermes300 said:
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Click to expand...
Click to collapse
all your question answered here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I have looked thru the wiki and cannot find the advice I need.
My device has the following on it and what I would like to know is if I can actually drowngrade the device back to WM5.
The rom version is 3.60.110.4 (T-mobile UK)
The radio version is 1.50.00.00 so I assume that it is boot 0108.
The IPL is 1.04 and the SPL 2.03.
The protocol reads as follows 32.83.7020.20H
I have come across a guide that states if the radio is above 1.27.00.00 then downgrading may not be possible.
"(NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.)" -http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
The other question I would like to ask is this - it is possible to put another verion of WM6 on with this radio version?
Thanks for any advice!
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Hermes300 said:
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Click to expand...
Click to collapse
I think you might not have gotten help 'cause it doesn't look like you've read what people pointed for you to read. Hopefully this'll help you get over the jargon hump and make progress. Having upgraded from the Offical T-Moble rom and swapped ROMs, it's definitely worth taking the time to learn how to do.
SIM unlock & CID unlock aren't the same.
If you've had you phone with T-Mobile for at least 3 month they will let Unlock you SIM (at least they do in the US). Contact them directly, you'll need an active account & phone number with them. This is free.
CID unlocking allows flashing ROMs onto your PDA. For some reason the folks at T-mobile, etc want you to have to look at their stuff every time you use a machine you bought through them. Using a cooked rom is like reinstalling XP without having AOL on your computer, makes life much better.
(flashing = installing to a PDA's Read Only Memory)
(ROM = OS + Radio + other stuff = basically everything thats on the PDA after a hard reset)
Flashing can be a dangerous thing, you don't want to 'brick' your PDA so you install an escape hatch. Hard SPL is that escape hatch.
(Brick = peice of baked clay = your PDA if a ROM install fails and you didn't install Hard SPL first)
The Hard SPL protects you if the ROM you installs fails 'cause power went out, ROM was bad, you bumped the cable, etc
http://forum.xda-developers.com/showthread.php?t=296722
Read & Follow the directions.
Select a ROM from here
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I have the same model & just installed Custel V2.5, seems to work well so far (day 2).
http://forum.xda-developers.com/showthread.php?t=364617
Good Luck
Thanks gt, and we have read advice on here but a lot of seems to be conflicting plus we seem to be just going round and round. Yep, ben there, yep read that etc.
I know the diff. between SIM and CID unlock but all I want to know is is it necessary to SIM unlock the phone to update a ROM?
I wont be using another network but will be staying with T-mobile W n W.
I did it!
Well I did it. flashed the phone with Schaps WM6 4.30 WWE.
Have noticed it runs faster than the previous T-Mobile WM6 and has some really neat features-you can adjust a lot more settings on the phone than before,quite impresed! Thanks for everyones help!
I Have read allot of data, unbrick tutorials and upgrades suggestions...
but I Still haven't found what is the correct upgrade stages.
As far as I have read from the unbrick suggestions, I've reached to the following order:
1) Upgrading SPL (Enabling KITL)
2) Unlocking
3) Upgrading radio
4) Upgrading Windows
Can someone confirm or recommend/add other steps ?
During the upgrade steps, will the HERMES be usable ?
Unlock first THEN hard spl.
DONT mess with your radio if it works fine, as this is part that can COMPLETELY brick your phone(you may be able to use as a PDA but not gonna be a phone EVER again.)
Load an os(either a stock one OR one of the cooked roms our TOP chefs cook up.), most come as OS only, no radio.
Hope this helps.... Cheers
It is useless for me, I cannot unlock the phone, due to different locking technique.
there are few posts about a locked Jasjam, with no olutions.
all the unlocking process went well, 3 times...
after the unlock process, when I insert the sim, it connects to the network, (indicated with 5 lines) and after about 5 seconds, it disconnect and says :
"The system detected an invalid SIM card"
and asks for unlock code.
now I have the following versions:
IPL 1.01
SPL 1.40.Olipro
Radio 1.16
any ideas ?
The Solution
To unlock Cellcom (Israel) JASJAM, As weird as it sounds, you should disable/deactivate/uninstall/whatever the EYRON Multi language support, which comes pre-installed.
I'll let the experts explain it.
I Dont know if it works for Orange-il Tytn too.
please consider note this in unlock guide ?
Now, which version of HARD-SPL with KITL should I Install... (Link will be helpful)
Please note that I Only Unlock the SIM, and not SuperCID, the .BAT file of the unlocker says:
"CID Unlock: will make your phone SuperCID forever, don't check this if you are unsure. HardSPL will do same effect without loosing warranty."
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
ultramag69 said:
Olipro ver 7(Hard SPL) This is considered the best for the layman, if you want to develope roms/ programs then you should use ver 9. However, ver. 9 does throw up an error after flashing. There is no problem and olipro said he'd get around to fixing it, BUT.......
Hope this helps...
Click to expand...
Click to collapse
I have upgraded to Olipro V7
When I Boot into bootloader, I see:
IPL-1.04
SPL-2.10.Olipro
But I Still not get any sign of KITL according to this threat (Step 5).
The Device is booting normally, as if I'm not holding any bottons.
How can I check if KITL enabled ?
Do I need KITL while using OLIPRO V7 ?
Orenk,
Have you read the Mr Vanx guides or the wiki? Here are the links:
http://www.mrvanx.org/cms/
http://wiki.xda-developers.com/
WB
I'm trying out my first-ever ROM-flashing exercise, on my ageing Hermes.
I've read the excellent tutorials by Mr Vanx and OliPro; and I'm certain I'm following them correctly.
I've checked that my phone has SPL 1.11.
I've checked that my phone is recognised on my Vista Mobile Device Centre.
But...
I can't load HardSPL.
Here's what I've tried and what happens:
a) I've tried renaming the HardSPL-V7 .ndh file as HERMIMG.ndh and then copying to my SD card's root folder; and then initiating bootloader. After 30 minutes, soft-resetting; and then checking bootloader: still SPL 1.11
b) I've tried running via RUU wrapper; and, each time, I get as far as "this is from an unknown publisher..." [I select "yes"]; and a few seconds later, my pc shows a dialogue message: "Error 260... the update utility cannot connect to your PDA/phone". Yet everything is connected as it should be.
Can a wise soul out there suggest what I need to do? Thanks in advance.
I think you first need to unlock your phone. It's too long ago when I did it to my Hermes...
http://forum.xda-developers.com/showthread.php?t=293665
Thanks for coming back so swiftly. Yes, the blimmin' obvious didn't cross my mind....
Thanks for the link as well; I'll give it a go in an hour's time and I'll update this thread with results either way. Fingers crossed it does the trick.
Pants - I spoke too soon...
The unlocking process completed successfully on the pc and also on my Hermes. As per instructions, I turned off the phone for 10 seconds, then rebooted it.
I tried running HardSPL via the RUU wrapper - but I get the same result as mentioned in point b) above.
Any other suggestions gratefullly received and I'll let you know how I get on
Ignore me - I had 1.40 OliPro bootloader and I successfully flashed a stripped-down WM6.1 ROM.
So all's well and I like this new ROM. But I've seen some gorgeous catering by you master-chefs out there - and I like your WM6.5 main courses...!
Thanks.
Mate, its better to have Hard SPL V7 on your Hermes... Try renaming the .nbh file to hermimg.nbh, NOT .ndh.... Small mistake, BIG problem...
SPL 1.40 is an older, not so safe version of Hard SPL, Its better to put V7 (2.10 oli) on...
Cheers...
ultramag69 said:
Mate, its better to have Hard SPL V7 on your Hermes... Try renaming the .nbh file to hermimg.nbh, NOT .ndh.... Small mistake, BIG problem...
SPL 1.40 is an older, not so safe version of Hard SPL, Its better to put V7 (2.10 oli) on...
Cheers...
Click to expand...
Click to collapse
Hi
Newbie so apologies whilst I get used to the site and issues.
Already have a problem with my (bought unlocked) SPV M3100 running on UK "Three" Network
The mic does not work with calls but the headset is OK.
Mic (and headset) works when Recording Notes.
(So probable Software Problem)
Soft Reset has not worked.
Just going thru great (including size !!!) site to learn to Flash, HArd SPL etc.
(Can someone post a link to HardSPL v7 !)
To come back to this thread what are the issues (bugs etc) with WM6.5 & are they fixed yet ?
I am also thinking of getting a TouchPro2 as well.
Does it come with WM6.5 installed.
If 6.1 is anyone here running both devices and can comment on speed stability of Common ROM if installed.
(I suppose limiting factor will be the Hermes/TyTn)
(My Hermes acquired mainly for use in Third World Environments (Aid Work), where it is tougher & now quite common. Touch Pro 2 used in the UK but need to Synch. Prefer a stable good looking ROM (Not too Flashy !!). Speed not that important)
Any help/Advice in Flashing ROMS much appreciated.
Also link to HardSPL v7
Many Thanks in advance
Link to Hard SPL V7, try the 1st page of this thread.....