Related
Appologize for posting the thread twice... I wasn't sure if this goes to the Hermes or the Herald forum...
Hello All,
I recently got an ATT 8525 and I'm trying to use it with my T-Mobile (US) SIM. I was able to successfully unlock the SIM and CID with an util/rom I found on this site (I think the post was from Pof). And I also re-flashed the phone with the latest ROM available.
But after about 5-10mins of usage the signal dies and when I reboot it says No GSM. Looks like the Radio ROM gets corrupted. I tried just re-flashing the Radio ROM and that doesn't help either. It works for short while and again the signal dies.
And also, I'm unable to install any of the generic ROMs (Fantastic Mobiz, PVET 40005) Although I'm connected to Active Sync when I run the Step 1 (ROMUpdateUtility_NV_G3.exe), I get a ERROR [222] : DEVICE NOT RESPONDING. And when I run the step 2 directly (update_rom.bat) I get an cannot update itsutils.dll maybe in use error.
As you can tell I've been messing with phone a lot for a couple of days with no luck and my frustration level is kinda high
As of now here’s where I stand. I re-flashed the phone (Image: 3.62, Radio 1.50) and it’s on the “Tap the screen to set up your windows based mobile device” screen. I plan on leaving it on this screen until I can a good solution.
I would like to get rid of the ATT ROM and install one of those hybrid generic ROM that is not Carrier specific. Any help will be much appreciated. Share your ideas, I’m very experimental
Phone Details…
ATT 8525
HERM100
IPL: 1.04
SPL: 1.40.0 lipro
ok ur going all over the map here.. did u hardspl first? also pvet 40005 isnt a hermes rom.. um try hardspl first THEN flash to a new rom maybe once you successfully do that then try a new 3.62 rom.. i run austinsync buts its naked..just like i like my women. ha. but if ur looking for a full blown try fun_key's rom or blinkys.. these arent carrier dependent
hey man jakeypoo, Thanks for your reply. I kinda figured that I was all over the map.
Okay first appologize my ignorance. What is a HardSPL? I did a search on this forum and I found Hard-SPL-V7.zip. Is this a good version to use? Also when I run the exe, All options are grayed out except for "Force Using SSPL" and "Is it Hard-SPL". What do I select.
Thanks!
Hardspl v7 is the latest version out there, its the one for you to use so that you're safe from future mishaps.
I also have an 8525 on T-mobile... so no worries.
Hope this helps.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
still problems (no gsm)
Thanks whistler4ever. That link was really a great help.
Here's what I did...
1. Installed the Hard SPL version 6
2. Installed the latest ATT ROM (ver 3.62 radio: 1.54) I had to do this because the radio on the phone was corrupt (says "no GSM" on the start screen) and couldn't install just the radio rom. kept giving connection errors.
3. Installed Schap's WM6 Pro 3.57 hoping this would get ride of the ATT ROM and my intial problem (no GSM) will go away.
Everything was fine for like 15 mins, then my phone just froze. I reboot the phone and sure enough the radio ROM was gone (no gsm). ;(
Running out of ideas.
1. Could this problem be because I'm using a TMobile SIM on a ATT's radio ROM?
2. Is the radio ROM specific to the phone type and provider(ATT, TMO..)? Is there a generic WM 6 radio rom? If yes, where can I find the latest version?
3. Any bright ideas?
Thanks again!
Current phone details...
ATT 8525
HERM100
IPL: 1.04
SPL: 2.10
ROM 3.62
Radio: no gsm
I was able to flash just the radio ROM - version 1.51. But again after a few hours the Radio got currupted. I also tried to follow the instruction ( http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5 ) to use the mtty.exe utility, but I don't get a USB prompt. I get Cmd prompt and if I still enter the password, it says invalid password. please help!!!
And how do I do the USB monitor capture? I could post more details that way. I'm using my girl friend's old razr now and it's painful!
I have used my t-mobile sim on AT&T rom's and other roms with no problem. I would try going back to a factory rom and then changing back to a cooked rom just to confirm its all a clean install. also, try downgrading your radio to a 1.47 or 1.48 (those have been proved pretty reliable across many cell providers).
Thanks Whistler. I'm going to start with the 1.48 version and if that doesn't work I'll try the 1.47 version. Not giving up on this.
I found 1.47 to work very well with t-mobile even when traveling...
Thanks Galaxys. I just installed the 1.47 radio. I have fully signal and the 'E', but I can't receive or make calls.
It almost looks like my TMO SIM is not compatible with the 8525. It always works for the first few minutes after an install and then stops working.
I'm very certain the phone is in good condition.
Should I try an older radio version.. like a 1.24 or something ?
Can I install just the tmobile radio rom?
I'm also going to install TNT 2.0 pro so I have the exact same set up as you and see if that makes a difference.
no luck!!!
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
try the way i posted in this thread http://forum.xda-developers.com/showthread.php?t=337125
ajjus said:
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
Click to expand...
Click to collapse
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Try to flash the entire UK T-Mobile ROM, then remove the internet settings and install the correct CAB for T-Mobile.
UK ROM here: http://forum.xda-developers.com/showthread.php?t=337163
PROVIDER SETTINGS CAB: http://forum.xda-developers.com/showthread.php?t=311446
a-h-t1, Junner2003 and galaxys - I'll try all your suggestions.
a-h-t1 - The first 2 steps went through fine. While I install the radio ROM as part of step 3, the installation doesn't go past 0%
I'm going try Junner2003 idea now. I'll keep everyone posted on my progress.
install stops at 11%
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
galaxys said:
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Click to expand...
Click to collapse
Hi Galaxys,
I don't think the IMEI is blocked. Or maybe it is, how do I find out? I don't have any of the symptons listed on the link you sent (don't hear the beeps or anything).
I originally had a T-Mobile wing. The LCD screen cracked (don't know how). And ofcourse TMo won't replace it.
http://forum.xda-developers.com/showthread.php?t=335346
I got 8525 from my company. It's almost new. Only used for a day on an AT&T SIM. This phone is free, and so I really don't have much to lose... so all out experimenting
Tried insalling from the micro card, even that stops while installing GSM. pissed!!! Why would the darn Radio not update???
this may sound stupid but if all else fails, why not...
my mda use to have signal then it would just disappear as well after 15 min or less..
turns out the sim card wasnt pressed in properly.. so i just put a piece of paper on top of the sim card to make it thicker and get the battery to press it down harder. and it solved all my problems...
just a suggestion..good luck
ajjus said:
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
Click to expand...
Click to collapse
See this post here for a possible reason (and technical explanation/theory) for your device stalling during radio update. The fix suggestions at the bottom of the page may help you - in particular :
Try cooling the device down a bit before flashing as the PIC chip (where your radio ROM is held) may flash more reliably/easier when cool. Don't ask why - that's from it's datasheet ;-)
The paper on the SIM card is a good idea too to rule out dodgy SIM connection - Great idea r0mmel
Hello all,
I Eb'd an HTC wizard (cingular 8125) running Wizard Love/NBD WM 6.
On the load screen I get:
AKU 2.3;
IPL and SPL:2.25.0001;
radio:2.25.11;
rom: 6.0.0.0.
My carrier is Tmobile.
Question 1: If my phone has this newer ROM and it takes calls on the Tmobile network it has been CID unlocked and SIM unlocked...right?
I wanna update my rom and think that I am competent enough to do so but there is alot to learn and this is not my full time gig...right.
Question 2: So, if I am correct in Q1 I should be able to flash roms right?
However when I attempt to do so the RUU gives me [error 224]. Active sync and or WMDC says its connected. (I installed the AS drivers in WMDC)
Question 3: Where do I go from here?
Question 4: The wi-fi is currently not working will a new rom potentially clear this up?
Thanks in advance for the time and advice..
grazie
hmmmm,
Well,did you updated to NBD wm6 yourself ? and how did you updated ? which method you adopted ? SoftSPL or HardSPL ?
You say its SIM unlocked as it takes calls on the Tmobile network .Did you SIM unlocked with lokiwiz03a ?
yes ! a G4 can be SIM unlocked but it can not be CID unlocked,however,it can be upgraded to wm6 rom,but with method either 'SoftSPL' or 'HardSPL'.With your present ipl/spl 2.25.0001 and you say its NBD wm6 running,then it must have been upgraded through 'SoftSPL' method,as it uses patched ipl/spl and Cid unlocks the phone temporarily,but it never permanently CID unlocks the phone.But with 'HardSPL' ,it changes the ipl/spl to a patched ipl 2.21.0001 and spl 2.21 olip.So everytime you want to upgrade,you'll have to upgrade using 'SoftSPL' method.
could you elaborate a little more about this.
Cheers!
Hey thanks for the correspondence zabardast_1, I have been getting frustrated and I have many times contemplated going for the brick or bust approach here.
So, I have done none of the updating on this rig. I rec'd it and I wanted it primarily for wifi however I can't get the wifi card/ (sdiowlan I believe) to even recognize an AP (... I posted in the networking forum but no response.) Thus my own reasoning leads me to believe I should start from scratch with a new rom unless you know of something else.
So, I am not the most savvy and thought that all of the info I had led to SIM and CID unlocked. I just read otherwise last night and in your reply. The info I have provided is accurate the IPL, SPL, radio, although I don't know which NBD release it is; just says 6.0.0.0 and release date: 2/2/07.
I am trying to get the new rom on the my device however and I would've probably already bricked it if I could get an RUU to communicate with my wiz. I always get [Error 224] when I run it and my phone is connected through active sync. I am running vista but have installed the AS drivers for WMDC. I also tried it at work the other day with XP same situ. I then tried flashing from the bootloader screen with an NBD, Wizard Love ( w/ Italian installer?), and T-mob (226102_22610105_022511). The only one that says it will update is the Tmob ROM, however I got cold feet at the update button and canceled.
Other funny stuff I have observed that may or may not be related to the problems I am having are:
Can't install cab files ie (enable rapi or Cert SPCS) and Wiz Sys Tools couldn't read my CID block and hard_SPL G4 gives me REXX error ( SPL_Version has no value).
So, any wizdom you or anybody can drop is much appreciated and needed at this point.
Whew...
Listen carefully. G4 Wizard cannot be CID-unlocked without paying money. (And yes, you are using a G4).
What you need now is to Flash your original stock carrier ROM (Or wizard love) to get your OS back. Then either use SoftSPL or install HardSPL and flash WM6 ROM.
Thanks Starkwong,
I will try installing wizard love tomorrow at work and if that don't work I will attempt a Cing ROM (will all of these work or do I need to mind my G3's and G4's for these???)
Grazie
So, It worked using Wizard Love at work and out of the bootloader window. Now I need to:
1.) Get wifi working.
2.) Get a newer ROM
I put a post up in the networking thread, I am a tool so far as these devices are concerned so be easy on me.
http://forum.xda-developers.com/showthread.php?t=372811
So do I get the wifi issue resolved before I reflash???
Thx again
I don't know what you mean by "wifi not working".
Maybe it is the wifi AP doesn't allow 11Mbps (802.11b) connections?
However, going to any of the WM6 ROMs should already set the registry to allow Wizard connects to G-Only APs. Just use HardSPL/SoftSPL and flash a WM6 and you will see.
OK so "wifi not working" may indeed be a general statement...
What I mean to say is that I am not able to connect to any wireless networks for internet not home (Linksys WRT 54G v5 with ddwrt firmware) or school (university wide) or my city's wifi network. It won't even detect them at least none that Ive seen since I've rec'd this phone. So, that is what I meant by the ambiguous statement.
So, being as your last post was a success I will try as you say and post the results tomorrow. Thanks again starkwong!!!
1 quick thing however, to be sure, I can now try the hard spl or soft spl method of tricking my phone to run an upgrade to WM6?
Still not able to get wifi APs????
OK although I have been successful at reinstalling the Mfg ROM and then Hard SPL'ing my wizard thanks to ya'll I still am unable to connect to a wireless network (see one even). I have the Olip on my SPL and I installed a TNT version of WM6 and I am still at work (drunk but still here). Anyway I can't see my wireless AP and I am beginning to think its a hardware issue if thats possible, i dunno the dynamics of this system maybe thats why it was for sale. In any event as usual I am willing to try what ever you guys throw at me as you're my only hope obi wan. Alright Im gonna go home for the night and try getting on to my home network.
Thanks again for all the help guys.
Is your device a original one from phone operator? I suspect your device is a China Dopod 838 with replaced casing, because the China version has the wifi hardware removed, so wifi can't be started even if an English ROM is used.
Looks to be authentic 8125
Starkwong, the Cingular logo and the 8125 model # are on the phone case where they have been when I've seen them before in pics. Therfore, I dunno I guess it looks like every other 8125 I've seen. Can I check the SN, IME or anything to be sure?
Thanks Again!!!
Starkwong,
I am getting all the options for wifi on my phone the LHS LED flashes green when I enable it and alternates blue green when BT is enabled. So, could it still be that its a dupod? I dunno but I am going home for the night... Thanks for your help. I will try connecting to my home network when I get there.
Is there anyway that is 100% safe to upgrade or is there always some amount of risk that a unit will end up a brick ?
I've read so much here and on other forums my head spins lol. I was like all set to just do it and then I got the phone lol, now I'm getting cold feet because I read so many people have bricked their phone.
Also can the SPL be done by SD card or does it need to be done with a computer ? I know some will say do a search, I have and man there are so many choices is there just a page or link with a simple idiots guide ?
Its better to do all the upgrading through a PC. Its more safer than SD Card upgrade.
Simple way
Do the HardSPL first then do anything you want. Try to look for Mr.Vanx guides
I agree with beastfellow, install hardspl first then you can flash any hermes rom you like. I have flashed my heremes over 50 times,i even flashed it 12 times in a week as long as the roms you have have no radio or spl in them then they should be fine to flash. Just make sure they hermes roms you are flashing.
hardspl can be downloaded from here http://pof.eslack.org/hermes-unlocker/
guide to how to do it is located here
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
other guides and there links can be found here
http://forum.xda-developers.com/showthread.php?t=299462
anyway my advice is to go for it. I have only ever bricked one device and that was a wallaby back in the day.
good luck and make sure you read EVERYTHING ,twice if you have to
Dalork,
I felt exactly the same way as you a couple of years back. What I did was to read every scrap of info I could find, constantly assessing the risk, while looking for a stable rom.
Key criteria for my rom search was what other people were saying about that rom (good and bad) and the developers willingness to resolve issues. In the first instance this led me to Schaps and his brilliant roms. For my rom history see my signature.
Read the following threads very carefully, then read the threads on one rom from Schaps and, say, a rom from Kin0ken. Look at the 6.0 roms, NOT the 6.1 versions...
http://www.mrvanx.org/thg/
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes.
Also use these search tools:
wiki - http://www.google.com/advanced_search?q= +site:http://wiki.xda-developers.com&hl=en&lr=&as_qdr=all
forum - http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
entire xda site -
http://www.google.com/search?q=site:xda-developers.com
Once you are fully genned up then prepare your kit carefully, e.g. make sure your phone batttery is fully charged, then upgrade your rom as you logically and carefully work your way step by step through Mr Vanx guides.
First time I upgraded I had the Mr Vanxguide open on my desktop PC whilst I ran the rom upgrade off my laptop. Using the laptop meant that in the unlikely event of a power cut (does happen where I live) I wouldn't instantly end up with a bricked phone.
Good luck and PM me if you need help/any further info.
Cheers
WB
Thanks for the help folks, I'm just worried I'll brick it as I have a friend who tried this and his is a nice paper-weight now.
I must be getting confused as I thought doing the flashing direct frm the SD card was the safest ?
Anyways, I'm not certain at this point which is the best or safest ROM to go with. I was going to do the Hard-SPL-V7 (2.10 Olipro) and was think of the Schaps_WM6Pro_Hermes_4.31_WWE_Full.
ATM the unit has ROM 1.30.707.4 8/22/06 and Radio 1.20.31.10
I don't think it's ever been flashed as yet as the bootloader is IPL-1.01-SPL-1.06
ask your mate if i can have his paper weight i have a nice rock to swap for it
scousemartin, lol I had already asked him that before I bought my dopod as I was hoping to come here and find out if it could be fixed.
Another point, after upgrading the phone to say WM6 or whatever can you still recover/reload the original factory WM5 system/set-up ?
I guess I'm in-fact quite happy with how the phone is already I just really want to be able to use a 8GB Micro SDHC card so I can load more programs and music. I don't know if any of the radio ROM's will improve my signal as such but battery life seems to be ok already. Used the phone quite a bit today, started off with 80% battery and finished off tonight with still having 70%.
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
ultramag69 said:
Then why not search for the wm5/6 sdhc fix instead of potentially bricking your phone. Try this - http://forum.xda-developers.com/showthread.php?t=344338
Also, I still reckon, and I believe I'm not alone, that flashing via the sd card is safest....
Direct quote from Wam7's posts -
Flashing your ROM without HARDSPL is like going to a South African brothel without any condoms...
and not using a MicroSD Card is like walking into a prison, dropping your pants and yelling "come and get it boys!"
I rest my case...
Click to expand...
Click to collapse
Thanks heaps for that, and I agree I did think flashing from a SD card would be safer as there is no risk in USB/sync problems, no cable to bump...etc..etc... But then I'm a total newbie, what I think doesn't always make sense lol.
If I just do the Hard-SPL-V7 and then something like Schaps_WM6Pro_Hermes_4.31_WWE_Full and don't do the radio ROm is there really much chance of bricking the Dopod ?
While I say I'm not bothered with upgrading the OS and everything else, it's mostly because I'm **** scraed of bricking it lol. I guess it would be silly to say I wouldn't like the better features of a decent upgrade, I just have to get my head around it somehow. But I WILL need more space as I really like to put lots of music on it and some games/apps. Hence the SDHC, I'd like 4GB but would love 8GB as I doubt I'd ever run out of room then.
As it is with my current phone I have 3 x 1GB cards which I just swap around and I hate having to do that and I'm always losing/misplacing the damn things.
If you are SERIOUSLY thinking of upgrading, Hard SPL your phone. You can find the thread "Hard SPL or how not to brick your Hermes" in the upgrading section. Its best to do this as it is the safest we thing you can do. It won't prevent a brick but it makes it a lot more fixable. I have never bricked a phone that I couldn't fix (yet) with Hard SPL on it.
Its fairly difficult, I find bricking the hermes when using the sd card method, as long as you make sure you have Hard SPL, Unlock your Hermes(if needed, did this as wasn't sure) and make sure your battery is charged.
Unlock before putting Hard SPL on though as it downgrades the SPL to 1.10 olipro.
Also use Hard SPL ver.7 (should say SPL 2.10 olipro after upgrade) as ver 9 is the developers SPL (says SPL 2.60) and throws up error messages (if done from the pc) after flash.
As for the rom, no-one can say what is best... What is suitable for me may not be for you. If you ask this questiopn on a thread you'll be inundated with "This rom is best..." remarks. Search and you will see.
Hope this shines some light on the subject (forgive me if this seems scattered, too much caffeine and not enough sleep), anyway,
Cheers....
Thanks for the info and it does help/shed light on it. I have read heaps of info about most everything here, maybe more than I should have even to sart off with lol. I would normally not have been so concerned except that I have a friend close by who tried this exact way of flashing and still somehow bricked phone. Though he did say with folks help here he did get the unit working again but the radio never worked again I think he said.
I already downloaded a copy of Hard-SPL-V7 and Schaps_WM6Pro_Hermes_4.31_WWE_Full.
Not certain if this is the right one for me or not but seems alot of people like it and find it stable. I also grabbed this HER_DopodAsia_AUS_1.30.707.4_1.20.31.10_WWE_Ship though I'm not certain if it's any good or not. I haven't grabbed the unlocking file, not sure I need it or not. With flashing the Hard-SPL-V7 by sd card am I right in what I have read that all I need to do is rename the nbh. file and not the RUUWrapper_exe.
I am finding it difficult to get the Dopod to use 3G for web browsing/email though. But someone told me that the original set-up/ROM wasn't much good for the Optus/Virgin 3G network.
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
ultramag69 said:
Yes you do only have to copy and rename the .nbh file. Don't forget to run the sspl.exe file from the phone however if you upgrade Hard SPL from the sd card. I ran the unlock tool as a precaution. I DID use the pc for this. I also used the pc to install Hard SPL. Hard SPL takes about 2 secs to install so no real trouble there but the unlocker will change your radio rom. I'd probably install the official Telstra rom to get your tradio back to 154.30.10 after unlocking (it changes to 150.00.00). Also, if you need to search for CircAU's roms as they are made for us Aussies and have a little tool that allows automatic setup of MMS/SMS. You just pick which carrier you have and press start.
You might be able to find a cab file for it on the forum. Do a search for"CWW Enterprises Aus Operator Con.cab". This can then be loaded into ANY rom and used to fix your setup for MMS/SMS. Make sure you also run the ARCSoft MMSComposer cab file first...
Cheers...
Click to expand...
Click to collapse
You got me really confused now lol, I thought I only needed to run the Hard SPL and then whatever ROM I liked (was looking at ones without radio ROM's). Also do you think it would be wsie to flash it with a radio stack for Telstra when I'm using Virgin as it seems Virgin is using the Optus network.
Sorry if I sound daft just the more I read the more confused I'm getting. Also it seems that everyone does have a different opinion on how and what is best. Just want to work out what is best for me before I have a go at bricking my phone lol. I've not found setting up SMS/MMS hard at all. Seeed pretty easy, having most my trouble setting it up for Virgin's 3G access for web browsing. Just can't seem to get it to work, got it set-up for wifi at home no drama but don't really need web access from the phone when I'm at home and have several computers.
Sorry, Information overload...
1. CWW Enterprises Aus Operator Con.cab - this cab file does a quick loading of sms/mms setting on the phone. You can use ANY rom and then setup your messaging with this. First however, install 2.
2. ARCSoft MMSComposer cab - This allows the use of mms on your phone properly. Some roms don't seem to set up your mms properly. If you have this installed then run 1. it will fix it all up.
I believe it should fix up ALL settings (including the 3g ones) as when you flash a rom, no native settings are kept and I've never had trouble using 3g after installing 1. and 2. then running 1. (will be in programs). It will soft reset your phone after setting it up.
Confused...
Really, just find the rom you want, check in settings as some have an auto network wizard to set this up. I just like CWW Enterprises Aus Operator Con.cab as it was made by an Aussie to use here. Its good when you don't have the network setup wizard (lite roms generally don't come with the frills)
Hope this clears it up....(preferably like glass and not like mud)
Cheers...
I am intrested in buying a Hermes, most likely the unbranded HTC tytn that I believe comes all unlocked.
For that one the procedure is the same still, right?
Hard spl install and choose rome you like
I have seen eithe Schaps 6 or the newer 6.1 with diamond stuff in it
So would I have the same procedure. To find the hard spl (not sure which version to install) and then find the rom w/out a radio?
es_bih, yes. Its the same procedure. Instyall Hard SPL ver 7(ver 9 is the developer one. It tends to throw up an error after upgrading via pc, no problem though).
As for the rom, make sure its a hermes rom. Any you find on this forum are for the Hermes BUT if you go to the other forums (herald, kaiser, etc....) the roms will brick your device as it isn't compatible with your device. Cooked roms are good but until you get to know the vagaries of wm6.1 I'd suggest to stick with wm6. Its more stable than wm6.1. Play with that and then when you are confident enough to try, then go for wm6.1.
Most if not all cooked roms come without a radio rom.
Cheers...
Tried doing the Hard-SPL-V7 on Vista x64 computer and get error 260 problems.
Tried on a XP laptop and got a different option. The first screen that comes up after running the RUUWrapper.exe not only give me the choice of "Force SSPL" but also allows me to tick "Is this Hard SPL ? "
In the guides I've been reading it says you should only get the "Force SSPL". So my question is seeing as I have the option of ticking "Is this Hard SPL?" should I ?
Installing Hard SPL? Tick SSPL. After that you can pick either.
Hmmm, can't seem to get it to do it. Sounds so simple I must be missing something somewhere. No matter what I try I stillget the ERROR 260 (update error)
I am trying to unlock my gps and have found lots of nice builds but i am confused as to which provider rom i should use. dcd's build looks the best to me. from what i have read about what i want to accomplish.
here is my data
software 2.17.557.0
firmware 1.61.00
hardware verson 0003
activation date mar 31 2008
device info.
rom version 2.17.557.0
rom date 11/20/07
radio version 1.64.00
i can read and i am not affraid to get my hands dirty but i didn't know which rock to start looking under.
thanks
nick
xbeergogglesx said:
I am trying to unlock my gps and have found lots of nice builds but i am confused as to which provider rom i should use. dcd's build looks the best to me. from what i have read about what i want to accomplish.
here is my data
software 2.17.557.0
firmware 1.61.00
hardware verson 0003
activation date mar 31 2008
device info.
rom version 2.17.557.0
rom date 11/20/07
radio version 1.64.00
i can read and i am not affraid to get my hands dirty but i didn't know which rock to start looking under.
thanks
nick
Click to expand...
Click to collapse
I have US Cellular also. Read the thread on how to unlock you phone. You will need to update your radio also. DCD 4.1.2 is the one I run and it is very good.
Start by going here
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Or this post is more orientated to USCC
http://forum.ppcgeeks.com/showthread.php?t=24511&highlight=uscc
Howdy,it's a breeze, just a bit scary at first but well worth it. Holla out if you need some step by step. 1. get good unlocker, 2. update radio to the latest dcd's offered. 3. upload carrier (uscc, right!) it will say cellsouth but dont worry, its just a name we can fix later, then load dcd's 4.1.2 rom. Set your GPS com to 4 and baud to 4800, dont let window automatically manage, too slow.
I was wondering how your coming with all the reading. I just ran accross your post and reminds me of doing this to my uscc titan last weekend. Always write ALL of your information from EPSt (##778 send) save it as a text on your computer, easy access....If you lose any info, I've got it here on mine. Let me know how it goes, really hard to mess up, dont worry....KC
xbeergogglesx said:
I am trying to unlock my gps and have found lots of nice builds but i am confused as to which provider rom i should use. dcd's build looks the best to me. from what i have read about what i want to accomplish.
here is my data
software 2.17.557.0
firmware 1.61.00
hardware verson 0003
activation date mar 31 2008
device info.
rom version 2.17.557.0
rom date 11/20/07
radio version 1.64.00
i can read and i am not affraid to get my hands dirty but i didn't know which rock to start looking under.
thanks
nick
Click to expand...
Click to collapse
Hi friends ..
I have a problem hopefully can help me, is the following.
I have a 6800 Titan U.S. Cellular and try to upgrade the ROM DCD 3.2.6 but made the mistake to put the ROM in the SPL 1.07.000 or blocked. When completed the installation of the ROM, my phone restart but it did not run the windows just stays on a black screen that says HTC Smart Mobility and no more progress is just there. in the bootloader (3 colored screen) shows that the SPL is 1.07.0000 and even more I've tried the stick olipro 2.40 to unlock the SPL and will not let me.
When you start appearing in small red letters that said R 1.64.00, D 3.2.6
Please help me no longer do that, I think it broke. !
Copoernico64 said:
Hi friends ..
I have a problem hopefully can help me, is the following.
I have a 6800 Titan U.S. Cellular and try to upgrade the ROM DCD 3.2.6 but made the mistake to put the ROM in the SPL 1.07.000 or blocked. When completed the installation of the ROM, my phone restart but it did not run the windows just stays on a black screen that says HTC Smart Mobility and no more progress is just there. in the bootloader (3 colored screen) shows that the SPL is 1.07.0000 and even more I've tried the stick olipro 2.40 to unlock the SPL and will not let me.
When you start appearing in small red letters that said R 1.64.00, D 3.2.6
Please help me no longer do that, I think it broke. !
Click to expand...
Click to collapse
Try updating it via the micro sd card. I believe this happened to me once and that is what I had to do. Just follow the instructions in one of the previous links.
And the radio is to old for that rom.
cmf04 said:
Try updating it via the micro sd card. I believe this happened to me once and that is what I had to do. Just follow the instructions in one of the previous links.
Click to expand...
Click to collapse
when told by the method of the microsd card, refer to NueSPL 2.47? because if so, for that is required to synchronize the phone with active sync so to put the exe in any folder of NueSPL and then format the card in fat32. The problem is that my phone can not synch with the active zync, that otherwise can have a flash card 2GB believe that this affects the flasheo through titaimg.nbh because all that I have just run is the gray screen with the legend that says "Loading ..."
I too have a USCC 6800 with 2.17.557.0 and 1.64.00 on it. I am new to the whole phone flashing scene, and have spent literally all day today on these forums searching and reading. Did you get yours working, and if so, what did you end up using? The main things I am looking for are GPS support and windows mobile 6.1 instead of 6.0, if that is possible. Any help would be greatly appreciated!!!
Would the upgrade for the Alltell/Sprint versions of the 6800 on the HTC site work with the USCC version? From what I can tell they are the exact same handset, just with different software features by their respective service provider.
i just put wm6.5 on my phone, its running...OK but too slow, I'm gonna go back to dcd 3.3.4 or maybe try a different one.
I am still hesitant of changing anything with mine. I guess I am too afraid of choosing the wrong thing and bricking it. I think I have a pretty good handle on how to do it, but not so much on the various files. If anyone has a good (tested) setup, please share the links to the various files.
Just wondering, are any of you who are having problems with flashing from the Kenosha, Racine, or Milwaukee Area of WI?
If so, I may be able to help you. I go to school in downtown Milwaukee and have flashed USCC roms on my phone many times before. I could unlock your phones and flash them for you as long as you payed me for the time to do so.
Thanks
Dave
I'm over at Fennimore on the southwest.
chrialex said:
I'm over at Fennimore on the southwest.
Click to expand...
Click to collapse
Are you serious...what are the odds of finding someone on a board like this from Fennimore. I live in Fennimore.
LOL, maybe the same as finding someone you know from Fennimore, it's Coulman
No ****. how are you doing. haven't seen you in a long time. i know this is off topic. hit me up on myspace www.myspace.com/sevendust4556
This guide help me get the gps going on a us cellular 6800. I thought i broke my phone at first. just read the instructions before doing it.
http://forum.ppcgeeks.com/showthread.php?t=24511
Hi all
I've had a search through the re-developed ROM's and to be perfectly open, I don't understand much about them.
I recently had a plain HTC HD2 and very happy with it for what I use it for, I don't need any fancy add on's and bits etc, just my Co-pilot and keeping my contacts and notes upto date.
That handset was lost and the insurance didn't have any HD2 replacements in stock. The Desire they sent instead has been sold, and I've purchased a T Mobile version of another HD2.
Is it a simple case of downloading and installing the official HTC ROM for the handset and doing a ROM update?
Apologies if this is a simple query etc!
Cheers, Dennis!
no, no no nonono.
assuming you mean a tmobile us model (1024 rom, green send key) then no, if you flash a non tmous stock rom (any stock rom that isn't for the tmous) onto that phone it will die. brick. dead, because of the ..51.. radio they include.
You may get some cooked roms that are on a base of lower than 2.x, but have been tweaked for the 576ram , and they will work on your phone, but its a very risky game to play.
Far better to follow the two rules..,
only ever flash tmous stock roms,
and
cooked roms that SPECIFICALLY say tmous compatible in the title and post 1 of that roms thread..
Hiya
Samsamuel, thanks for the info there. I'll update with more information! I'm technical, but not with smartphones to the level some of you guys here!
I'm in the UK, and it's a UK TMobile handset that I bought. I've already had the handset 'unlocked' so that I can use my O2 SIM, which is working etc.
From the handset
OS Version - 5.2.21889 (21889.5.0.87)
Manila Version - 2.5.20121429.0
ROM version - 1.72.110.4 (86525) WWE
ROM date - 04/02/10
Radio Version - 2.07.51.22_2
Protocol version - 15.32.50.07U
So, would it be ok to update to the normal HTC ROM?
Cheers, Dennis!
Ah ok in that case there is no need to mention that it is a t mobile phone, just confuses the issue.
Yes the regular update will work fine once happy is applied.
Thanks once again SamSamuel,
However, what's meant by 'once happy is applied' ?
Is that one of these hacks or special ROM things?
When I do a search, so many results come back containing the word 'happy' I have no idea where or what to look for!
Is there a thread which explains how to apply 'happy'?
Apologies for the vagueness!!
Cheers, Dennis!
lol, thats the android spell correction and me not proof reading before i post. should be HSPL
Hiya
To me, anything that's typed up 'could' potentially be what I need to do! I wouldn't know the difference!!
So, I've had a search for HSPL - I see it mentioned, but alas, I have no clue what it is, where to get it from, what to do with it when I get it!
Is there any straightforward points on what and where to get this HSPL, how to use it ?
I know I can download the HTC official ROM from their website, so that part I think I know what to do as I upgraded my last HD2.
Cheers, Dennis!
ok, hspl. Get HSPL2_RUN.zip from HERE, (you can follow instructions that say hspl or hspl3, theyre all the same, except for what phones they support, , hspl2 is teh most usefull for regular hd2 owners)
phone into bootloader and connect usb, (when you read 'get an active sync connection', , forget that, it doesnt mean actual active sync, just a usb connection)
get hspl2, run it, in the dropdown is a list of spl and hspl versions. if it ends .0000 its stock, if it ends .hspl its,,,,,, hspl.
choose 2.08.hspl, follow the prompts. if it doesnt work, run the hspl prog again, if it still doesnt work (timeout/connection errors) change usb ports and try again. no need to touch teh phone, just leave it in bootloader all the time.
once bootloader says spl 2.08.hspl you are good to go.
BUT
if you are planning to flash the 3.14 rom, , , you can't do it this way.
3.14 wont work on any spl/hspl except 3.03.0000 and there is no way to get 3.03.0000 except goldcard.
Hiya
Samsamuel - seems you're the only one willing to help me here! so I really appreciate it !
I know i've got to do 'things' from what you've said there, but I have no idea on how to do it! - give me some financial IT related stuff I'm good! ask me to do bootloaders and potential goldcard and run files and connect - I'm lost! I don't want to try things in case I 'brick' the handset!
The ROM I want is listed on the HTC downloads section for the HD2. It's dated 25th January 2010
Details are
ROM Version:
Norway:1.66.409.1, Spain :1.66.412.1, Denmark:1.66.403.1, France :1.66.406.1,
Sweden:1.66.413.2, Italy:1.66.408.1, WWE:1.66.405.2, France Bouygues: 1.66.483.0
So, if I somehow manage to do this HSPL thing, will I not be able to install the HTC ROM? I have no idea where or what the '3.14' ROM is?
Apologies for sounding really vague - I've never got into all the modified ROM's and stuff for smartphones. I've only ever needed to switch on, use the phone, install my GPS software and keep my contacts and notes syncronised. I'm just used to the HD2 I had as it was a case of straightforward use. This T mobile version is 'different'!
Anyone else able to help alongside everything SamSamuel has kindly provided so far? please?!!
Cheers, Dennis!
warning
Its best for you if you do not try to update your phone. Either get used to it or just sell it. There are rom update tutorials on this site. Just search for rom update tutorial, if you must try. The official htc software is not for this phone, if you install it, your phone will no longer work, and you wont be able to fix it.
No, its ok so long as you have a regular hd2 locked to t mobile as discussed in earlier posts.
Just to double confirm, if your phone has green send key,then STOP DANGER
But I think we're dealing with white send key, so normal hd2, and the target Tom isn't 3.14
So,,,
assuming white end key.
Phone backed up and off
Press hold keep holding volume down
Tap and release power keep holding volume down
When striped coloured screen appears
Plug in USB
On PC run hspl2
In dropdown choose 2.08.hspl
When it completes and phone starts to reboot immediately hold volume down again to return to stripey screen (bootloader)
When says USB at the bottom and split at top says 2.08.hspl run the .exe you downloaded from HTC
If you get connection errors, timeouts, leave the phone and just swap USB ports. When running hspl.exe right click it and "run as administrator"
(That's the last time I'm gonna write those out in full, there must be 500 identical step by steps and half as many YouTube vids. )
If your send key is green DO NOT DO THIS