I am trying to unlock my gps and have found lots of nice builds but i am confused as to which provider rom i should use. dcd's build looks the best to me. from what i have read about what i want to accomplish.
here is my data
software 2.17.557.0
firmware 1.61.00
hardware verson 0003
activation date mar 31 2008
device info.
rom version 2.17.557.0
rom date 11/20/07
radio version 1.64.00
i can read and i am not affraid to get my hands dirty but i didn't know which rock to start looking under.
thanks
nick
xbeergogglesx said:
I am trying to unlock my gps and have found lots of nice builds but i am confused as to which provider rom i should use. dcd's build looks the best to me. from what i have read about what i want to accomplish.
here is my data
software 2.17.557.0
firmware 1.61.00
hardware verson 0003
activation date mar 31 2008
device info.
rom version 2.17.557.0
rom date 11/20/07
radio version 1.64.00
i can read and i am not affraid to get my hands dirty but i didn't know which rock to start looking under.
thanks
nick
Click to expand...
Click to collapse
I have US Cellular also. Read the thread on how to unlock you phone. You will need to update your radio also. DCD 4.1.2 is the one I run and it is very good.
Start by going here
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Or this post is more orientated to USCC
http://forum.ppcgeeks.com/showthread.php?t=24511&highlight=uscc
Howdy,it's a breeze, just a bit scary at first but well worth it. Holla out if you need some step by step. 1. get good unlocker, 2. update radio to the latest dcd's offered. 3. upload carrier (uscc, right!) it will say cellsouth but dont worry, its just a name we can fix later, then load dcd's 4.1.2 rom. Set your GPS com to 4 and baud to 4800, dont let window automatically manage, too slow.
I was wondering how your coming with all the reading. I just ran accross your post and reminds me of doing this to my uscc titan last weekend. Always write ALL of your information from EPSt (##778 send) save it as a text on your computer, easy access....If you lose any info, I've got it here on mine. Let me know how it goes, really hard to mess up, dont worry....KC
xbeergogglesx said:
I am trying to unlock my gps and have found lots of nice builds but i am confused as to which provider rom i should use. dcd's build looks the best to me. from what i have read about what i want to accomplish.
here is my data
software 2.17.557.0
firmware 1.61.00
hardware verson 0003
activation date mar 31 2008
device info.
rom version 2.17.557.0
rom date 11/20/07
radio version 1.64.00
i can read and i am not affraid to get my hands dirty but i didn't know which rock to start looking under.
thanks
nick
Click to expand...
Click to collapse
Hi friends ..
I have a problem hopefully can help me, is the following.
I have a 6800 Titan U.S. Cellular and try to upgrade the ROM DCD 3.2.6 but made the mistake to put the ROM in the SPL 1.07.000 or blocked. When completed the installation of the ROM, my phone restart but it did not run the windows just stays on a black screen that says HTC Smart Mobility and no more progress is just there. in the bootloader (3 colored screen) shows that the SPL is 1.07.0000 and even more I've tried the stick olipro 2.40 to unlock the SPL and will not let me.
When you start appearing in small red letters that said R 1.64.00, D 3.2.6
Please help me no longer do that, I think it broke. !
Copoernico64 said:
Hi friends ..
I have a problem hopefully can help me, is the following.
I have a 6800 Titan U.S. Cellular and try to upgrade the ROM DCD 3.2.6 but made the mistake to put the ROM in the SPL 1.07.000 or blocked. When completed the installation of the ROM, my phone restart but it did not run the windows just stays on a black screen that says HTC Smart Mobility and no more progress is just there. in the bootloader (3 colored screen) shows that the SPL is 1.07.0000 and even more I've tried the stick olipro 2.40 to unlock the SPL and will not let me.
When you start appearing in small red letters that said R 1.64.00, D 3.2.6
Please help me no longer do that, I think it broke. !
Click to expand...
Click to collapse
Try updating it via the micro sd card. I believe this happened to me once and that is what I had to do. Just follow the instructions in one of the previous links.
And the radio is to old for that rom.
cmf04 said:
Try updating it via the micro sd card. I believe this happened to me once and that is what I had to do. Just follow the instructions in one of the previous links.
Click to expand...
Click to collapse
when told by the method of the microsd card, refer to NueSPL 2.47? because if so, for that is required to synchronize the phone with active sync so to put the exe in any folder of NueSPL and then format the card in fat32. The problem is that my phone can not synch with the active zync, that otherwise can have a flash card 2GB believe that this affects the flasheo through titaimg.nbh because all that I have just run is the gray screen with the legend that says "Loading ..."
I too have a USCC 6800 with 2.17.557.0 and 1.64.00 on it. I am new to the whole phone flashing scene, and have spent literally all day today on these forums searching and reading. Did you get yours working, and if so, what did you end up using? The main things I am looking for are GPS support and windows mobile 6.1 instead of 6.0, if that is possible. Any help would be greatly appreciated!!!
Would the upgrade for the Alltell/Sprint versions of the 6800 on the HTC site work with the USCC version? From what I can tell they are the exact same handset, just with different software features by their respective service provider.
i just put wm6.5 on my phone, its running...OK but too slow, I'm gonna go back to dcd 3.3.4 or maybe try a different one.
I am still hesitant of changing anything with mine. I guess I am too afraid of choosing the wrong thing and bricking it. I think I have a pretty good handle on how to do it, but not so much on the various files. If anyone has a good (tested) setup, please share the links to the various files.
Just wondering, are any of you who are having problems with flashing from the Kenosha, Racine, or Milwaukee Area of WI?
If so, I may be able to help you. I go to school in downtown Milwaukee and have flashed USCC roms on my phone many times before. I could unlock your phones and flash them for you as long as you payed me for the time to do so.
Thanks
Dave
I'm over at Fennimore on the southwest.
chrialex said:
I'm over at Fennimore on the southwest.
Click to expand...
Click to collapse
Are you serious...what are the odds of finding someone on a board like this from Fennimore. I live in Fennimore.
LOL, maybe the same as finding someone you know from Fennimore, it's Coulman
No ****. how are you doing. haven't seen you in a long time. i know this is off topic. hit me up on myspace www.myspace.com/sevendust4556
This guide help me get the gps going on a us cellular 6800. I thought i broke my phone at first. just read the instructions before doing it.
http://forum.ppcgeeks.com/showthread.php?t=24511
Related
All rite here we go, in advanced i thank u guys for trying to help me out here.
First, i'm a n00bie compared with the most of u guys.
My Device:
Tytn Herm 300
OS: Schaps Purple 3.30c
SPL: Hard-Spl 2.10 oli
Radio: 1.16.00.00 !Hmzz...that's the problem!
My phone functionallity sucks...some how it keep loosing connection while i see the phone indication bar up to 3 bars. So i decided to do something about it.
Beeing a noob i thought it got to do something with the OS. So i upgrade it to Schaps's wonderfull purple WM6 Hermes 3.30c and loaded the Hard SPL 2.10 oil V7. All went great, and my Hermes never looked so cool before.
But now i'm trying to upgrade my radio, which is still version 1.16.00.00, to what ever better version. I tried every radio upgrade possible from this list:
http://wiki.xda-developers.com/index...actedRadioRoms
Every single one starts well. passed the information retrieving from my phone. Confirmed the update, and then there was the installation progress bar....
All versions of the radio roms i downloaden get stuck in here. It doesn't even start..0% and error... And really i dun have any idea why.
So after re-flashing a gazillion times, i decided to ask help to the allmighty XDA community. So pls, if anybody there got a suggestion or the solution...i would be so thankfull and will slaughter a goat to worship you
If you've got schaps Rom and HardSPL on your phone then you obviously don't have problems flashing or with PC/phone comms.
When you try flashing the radio, how long do you wait before deciding it doesn't work? I've found that some of them can take what seems like a really long time and I'm tempted to unplug and start again.
Maybe try again, then go make yourself a cup of tee/coffee or get a beer then come back 10 minutes later. If the upgrade still hasn't worked we'll have to look a bit deeper
RaDeNRFX said:
- I am so sorry posting this twice in the wrong sections, it seems that i'm a really noobie forum user - But i finally found the rite section. So my humble excuses.
All rite here we go, in advanced i thank u guys for trying to help me out here.
First, i'm a n00bie compared with the most of u guys.
My Device:
Tytn Herm 300
OS: Schaps Purple 3.30c
SPL: Hard-Spl 2.10 oli
Radio: 1.16.00.00 !Hmzz...that's the problem!
My phone functionallity sucks...some how it keep loosing connection while i see the phone indication bar up to 3 bars. So i decided to do something about it.
Beeing a noob i thought it got to do something with the OS. So i upgrade it to Schaps's wonderfull purple WM6 Hermes 3.30c and loaded the Hard SPL 2.10 oil V7. All went great, and my Hermes never looked so cool before.
But now i'm trying to upgrade my radio, which is still version 1.16.00.00, to what ever better version. I tried every radio upgrade possible from this list:
http://wiki.xda-developers.com/index...actedRadioRoms
Every single one starts well. passed the information retrieving from my phone. Confirmed the update, and then there was the installation progress bar....
All versions of the radio roms i downloaden get stuck in here. It doesn't even start..0% and error... And really i dun have any idea why.
So after re-flashing a gazillion times, i decided to ask help to the allmighty XDA community. So pls, if anybody there got a suggestion or the solution...i would be so thankfull and will slaughter a goat to worship you
Click to expand...
Click to collapse
ach2 said:
If you've got schaps Rom and HardSPL on your phone then you obviously don't have problems flashing or with PC/phone comms.
When you try flashing the radio, how long do you wait before deciding it doesn't work? I've found that some of them can take what seems like a really long time and I'm tempted to unplug and start again.
Maybe try again, then go make yourself a cup of tee/coffee or get a beer then come back 10 minutes later. If the upgrade still hasn't worked we'll have to look a bit deeper
Click to expand...
Click to collapse
I waited till the Program says connection error...and send me to recovery proces. And i've been making hella tons of coffee after trying to flash that many Radio Roms. Any other suggestions? I'm so desperate
Ok, maybe some more info...
Do you see 'NO GSM' during the phone boot process?
Do you have no radio at all or just intermittent reception?
Are you running Vista?
What is the connection error number?
If you've lost the radio but have hard SPL it may just be a case of re-flashing an original manufacturers ROM (which will include the radio) then start your upgrading again afterwards. Don't forget to back-up data before flashing.
If you do flash a manufacturers shipped rom - check that you still have HardSPL afterwards.
ach2 said:
Ok, maybe some more info...
Do you see 'NO GSM' during the phone boot process?
Do you have no radio at all or just intermittent reception?
Are you running Vista?
What is the connection error number?
If you've lost the radio but have hard SPL it may just be a case of re-flashing an original manufacturers ROM (which will include the radio) then start your upgrading again afterwards. Don't forget to back-up data before flashing.
If you do flash a manufacturers shipped rom - check that you still have HardSPL afterwards.
Click to expand...
Click to collapse
Well the weird part is "No GSM" appeared occasionally...some times it shows it sometimes it's not showing it.
No...i'm a Vista hater. And dun have the original manufacturers ROM. I've got the "T-Mobile Vario II" from The Netherlands..so if anybody got a link for the original version i'd be thankfull.
The Radio it self is intermittent and very inpredictable...for example:
Radio indicator says i got full recieve:...but i can't call or recieve any.
Connection error: 262 (which is, if i'm not mistake a connection error.) Which is bull cuz i'm re-running every other ROM's upload with the same way and succeded/
Radio indicator says no reception and shows an exclamation mark:...and my GF just called me to hurry up and pick her up :/
But the weird part is...it seems that my radio ROM is locked somehow. I can upgrade or downgrade SPL's and OS ROM's but not the Radio ROM.
I've tried to use MTTY by now and followed the manual bellow: (Problem 5)
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
But it began with invalid password. Procede as written and it didn't helped.
More suggestions are welcome
My bad...i didn't looked well enough. It is saying No GSM the whole time.
More information:
I've checked the Device information on the Hermes now some information are blank:
Radio: Blank
Protocol version: Blank
IMEI: Blank
All other information field are filled. Been spending hours reading tutorials and manuals...and nothing. HELP!
OK,
This isn't a problem I've had myself, but loads of other people have and there are quite a few threads on how to unbrick from here... you're going to have to do a bit of reading.
This page shows the different combinations of OS/radio/brick type etc and should point you in the right direction for the correct course of action http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Then read through this thread http://forum.xda-developers.com/showthread.php?t=286755 . It's got really long but read the beginning where POF describes the types of problem and also the solutions. Then it's probably best to jump to somewhere near the end and pick someone who has a similar problem.
It sounds to me as though you need to just flash a radio in nbh format, but please do some more reading before you do this to check my advice - as I said at the beginning, I haven't had this problem so I'm only giving advice from what others have written.
ach2 said:
It sounds to me as though you need to just flash a radio in nbh format, but please do some more reading before you do this to check my advice - as I said at the beginning, I haven't had this problem so I'm only giving advice from what others have written.
Click to expand...
Click to collapse
I am really thankfull of ur post. Unfortunately, i've been doing some reading. Including the link u gave me. The problem is that i can't upload/flash Radio in nhb format.
As i described in the first place, i can't load a nhb format radio in RUUWrapper.exe properly. It can start the proces..but it always end up with a connection error code 260/262 during the installation progres bar (0%).
The solutions some ppl tried in ur link is often not my case. And the similar cases i have tried where i end up with the same grumpfy situation.
have you tried to flash the radio using the SD card method? I too have a cable connection problem but I fear mine may be hardware failure.
Yap...and no luck
Hi all,
New to this forum. Actually, new to the device (so PLEASE be gentle ). I have an AT&T/Cingular 8525 I got two nights ago (14 Aug) and am trying to upgrade to the latest release version for Cingular. I've downloaded and installed the RUU file on my desktop computer.
When I execute it, I go through the steps as indicated, and when it gets to the point where it starts to push the update - my ActiveSync on the desktop shuts down. I then get the failure message and am left in the cold.
My device came with:
ROM 1.34.502.1
Radio: 1.16.00.00
Protocol: 32.53.7018.01H
I'm running ActiveSync v4.5.0 build 5096.
What am I doing wrong?
Thanks,
Joe
edit: I've been reading the upgrading notes on this forum, and haven't seen anywhere the problem with ActiveSync closing down. Also, didn't find this forum until AFTER I started looking at ROM upgrades. I'm surfing around now so I don't brick my phone.
What OS you running? Vista? XP?
Keep reading as you are doing now - good work.
Desktop OS is XP MCE
My desktop is running XP Media Center Edition, and I'm up to date with the service packs and other High Priority and Optional updates (via Windows Update).
I am able to ActiveSync with the Desktop without a problem. It remains connected and data is passed. I can browse the device.
When I try to execute the RUU file, I hear the "device disconnect" sound, the ActiveSync window closes (I've been leaving it open on the desktop), and then the upgrade times out.
WTFO.
I continue to read, but may end up keeping the unit on the original software (not my optimal solution). Anyone else experienced the ActiveSync termination problem on the desktop?
Thanks again,
Joe
Well, have you upgraded anything? Like upgrading the SPL to HardSPL?
What I would do, is this:
1. Read Mrvanx.org upgrade guides.
2. Put HardSPL on there. (If you have the disconnect problem, just put the phone in Bottloader mode, then plug into USB, then run the RUU.)
3. Upgrade to whatever ROM. Try the normal way, if that doesn't work, try the "start in bootloader" method described above or try the SD Crd flashing method.
I personally, take apart any ROM that I want to flash (use winrar to extract the exe and dutty's good nbh tool to extract and rebuild the nbh) and use the most recent custom_ruu and flash that way. I never use whatever RUU is packaged with the ROM. I don't have communication problems. Give it a try, don't give up. If you need to find stuff, try the google search link in my signature - the best way to find stuff on the forums.
Todd,
Thanks for the replies. I just downloaded HardSPL, and will try that when I get home tonight. I also downloaded "Hermes_WM6_WWE_vp3G_v3[1].0.0_ATT.rar" to upgrade to WM6.
To answer your question, no, I haven't upgraded anything (yet). I have been able to put a couple of programs on the device (Battery Pack Pro, Photo Contacts Pro, and Conversions in Hand), and they all work fine.
I'll try the bootloader method if I can't get ActiveSync to make it happen.
Stand by for my (hopefully happy face) post(s) tonight.
Joe
Well, I'm wearing my smiley face 'cause I was able to successfully flash an update into my 8525 last night. While I didn't do it on this machine (my desktop - didn't try), I was able to install Hard-SPL and upgraded to WM6 from a different computer.
I am still running radio version 1.16.00.00, but will try to update that over the weekend. I figued that since I haven't BRICKED this thing yet, I'll keep working on it until I do .
Thanks to all (especially the over 970 postings in the Hard-SPL thread - I read through ALL the pages). This is a great site and I'm looking forward to customizing the H3LL out of this phone.
Joe
marinerjoe said:
Thanks to all (especially the over 970 postings in the Hard-SPL thread - I read through ALL the pages).
Joe
Click to expand...
Click to collapse
Reading through the pages is why you are wearing your smiley.
Glad you got it going. Since you are on AT&T, I would suggest you start with Radio 1.50 or 1.48. Those are the ones I have had the greatest success with. 1.48 was shipped with a Cingular update and 1.50 is the newest. I don't know what carrier it shipped with, but it has worked well for me and others I know who are on Cingular.
Good luck and have fun!
todd_jg said:
Since you are on AT&T, I would suggest you start with Radio 1.50 or 1.48. Those are the ones I have had the greatest success with. 1.48 was shipped with a Cingular update and 1.50 is the newest. I don't know what carrier it shipped with, but it has worked well for me and others I know who are on Cingular.
Good luck and have fun!
Click to expand...
Click to collapse
Thanks. I'm thinking about 1.48 as I've seen a number of folks with it in their profile. Since I loaded Hard-SPL on the device, I should be able to safely update just the radio, right?
Any benefits to going all the way to 1.50?
Joe
Edit: I upgraded to radio 1.48 (using MrVanx guides). The step-by-step procedure was absolutely OUTSTANDING! I have tested the phone, and IT WORKS! Only difference is now I connect via Edge (shows an E), before it was GPRS(?) (it showed a G). Does it really matter which connection method it uses?
marinerjoe said:
Thanks. I'm thinking about 1.48 as I've seen a number of folks with it in their profile. Since I loaded Hard-SPL on the device, I should be able to safely update just the radio, right?
Any benefits to going all the way to 1.50?
Joe
Click to expand...
Click to collapse
Yeah, you can do just the radio. No problems.
Regarding 1.50, I personally get better battery life. Reception seems about equal to 1.48 for me. Performance is highly dependent on your geographic specifics. Personally, I would put 1.50 on for a few days, then try 1.48 for a few days. Then you can pick whichever one works best for you.
Thanks. As you can see from my edit, I successfully updated to 1.48. I'll use this as my baseline and then see about going to 1.50 in a bit.
Thanks again,
Joe
marinerjoe said:
Well, I'm wearing my smiley face 'cause I was able to successfully flash an update into my 8525 last night. While I didn't do it on this machine (my desktop - didn't try), I was able to install Hard-SPL and upgraded to WM6 from a different computer.
I am still running radio version 1.16.00.00, but will try to update that over the weekend. I figued that since I haven't BRICKED this thing yet, I'll keep working on it until I do .
Thanks to all (especially the over 970 postings in the Hard-SPL thread - I read through ALL the pages). This is a great site and I'm looking forward to customizing the H3LL out of this phone.
Joe
Click to expand...
Click to collapse
Hello marinerjoe,
I have tried to upgrade my friend's Hermes and experienced the same problem. Instead, I can flash Hard-SPL on it but fail at upgrade (being kicked out by the Activesync).
May I know if you just complete the upgrade with a different computer with nothing else? Could you advise me your path of success?
t1tough said:
Hello marinerjoe,
I have tried to upgrade my friend's Hermes and experienced the same problem. Instead, I can flash Hard-SPL on it but fail at upgrade (being kicked out by the Activesync).
May I know if you just complete the upgrade with a different computer with nothing else? Could you advise me your path of success?
Click to expand...
Click to collapse
I did not attempt to do the upgrade from the same desktop machine upon which I had my problems. Instead of trying some troubleshooting suggestions I read on this site, I took the easy way out . I went to a different machine that I had administrator priveleges on, and did it there.
The difference between the two machines? My desktop has Symantec Antivirus and the Symantec firewall. The other machine (that worked) doesn't have the firewall. There are other differences also, but I'm thinking the firewall might have been a contributing factor.
Others on this board with WAY MUCH more experience with me can tell you if I'm full of SH!T or not (there are some here who aren't shy or afraid to FLAME SPRAY those less ed-ju-ma-cated).
Sorry I couldn't be of more help. GOOD LUCK!
Joe
Appologize for posting the thread twice... I wasn't sure if this goes to the Hermes or the Herald forum...
Hello All,
I recently got an ATT 8525 and I'm trying to use it with my T-Mobile (US) SIM. I was able to successfully unlock the SIM and CID with an util/rom I found on this site (I think the post was from Pof). And I also re-flashed the phone with the latest ROM available.
But after about 5-10mins of usage the signal dies and when I reboot it says No GSM. Looks like the Radio ROM gets corrupted. I tried just re-flashing the Radio ROM and that doesn't help either. It works for short while and again the signal dies.
And also, I'm unable to install any of the generic ROMs (Fantastic Mobiz, PVET 40005) Although I'm connected to Active Sync when I run the Step 1 (ROMUpdateUtility_NV_G3.exe), I get a ERROR [222] : DEVICE NOT RESPONDING. And when I run the step 2 directly (update_rom.bat) I get an cannot update itsutils.dll maybe in use error.
As you can tell I've been messing with phone a lot for a couple of days with no luck and my frustration level is kinda high
As of now here’s where I stand. I re-flashed the phone (Image: 3.62, Radio 1.50) and it’s on the “Tap the screen to set up your windows based mobile device” screen. I plan on leaving it on this screen until I can a good solution.
I would like to get rid of the ATT ROM and install one of those hybrid generic ROM that is not Carrier specific. Any help will be much appreciated. Share your ideas, I’m very experimental
Phone Details…
ATT 8525
HERM100
IPL: 1.04
SPL: 1.40.0 lipro
ok ur going all over the map here.. did u hardspl first? also pvet 40005 isnt a hermes rom.. um try hardspl first THEN flash to a new rom maybe once you successfully do that then try a new 3.62 rom.. i run austinsync buts its naked..just like i like my women. ha. but if ur looking for a full blown try fun_key's rom or blinkys.. these arent carrier dependent
hey man jakeypoo, Thanks for your reply. I kinda figured that I was all over the map.
Okay first appologize my ignorance. What is a HardSPL? I did a search on this forum and I found Hard-SPL-V7.zip. Is this a good version to use? Also when I run the exe, All options are grayed out except for "Force Using SSPL" and "Is it Hard-SPL". What do I select.
Thanks!
Hardspl v7 is the latest version out there, its the one for you to use so that you're safe from future mishaps.
I also have an 8525 on T-mobile... so no worries.
Hope this helps.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
still problems (no gsm)
Thanks whistler4ever. That link was really a great help.
Here's what I did...
1. Installed the Hard SPL version 6
2. Installed the latest ATT ROM (ver 3.62 radio: 1.54) I had to do this because the radio on the phone was corrupt (says "no GSM" on the start screen) and couldn't install just the radio rom. kept giving connection errors.
3. Installed Schap's WM6 Pro 3.57 hoping this would get ride of the ATT ROM and my intial problem (no GSM) will go away.
Everything was fine for like 15 mins, then my phone just froze. I reboot the phone and sure enough the radio ROM was gone (no gsm). ;(
Running out of ideas.
1. Could this problem be because I'm using a TMobile SIM on a ATT's radio ROM?
2. Is the radio ROM specific to the phone type and provider(ATT, TMO..)? Is there a generic WM 6 radio rom? If yes, where can I find the latest version?
3. Any bright ideas?
Thanks again!
Current phone details...
ATT 8525
HERM100
IPL: 1.04
SPL: 2.10
ROM 3.62
Radio: no gsm
I was able to flash just the radio ROM - version 1.51. But again after a few hours the Radio got currupted. I also tried to follow the instruction ( http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5 ) to use the mtty.exe utility, but I don't get a USB prompt. I get Cmd prompt and if I still enter the password, it says invalid password. please help!!!
And how do I do the USB monitor capture? I could post more details that way. I'm using my girl friend's old razr now and it's painful!
I have used my t-mobile sim on AT&T rom's and other roms with no problem. I would try going back to a factory rom and then changing back to a cooked rom just to confirm its all a clean install. also, try downgrading your radio to a 1.47 or 1.48 (those have been proved pretty reliable across many cell providers).
Thanks Whistler. I'm going to start with the 1.48 version and if that doesn't work I'll try the 1.47 version. Not giving up on this.
I found 1.47 to work very well with t-mobile even when traveling...
Thanks Galaxys. I just installed the 1.47 radio. I have fully signal and the 'E', but I can't receive or make calls.
It almost looks like my TMO SIM is not compatible with the 8525. It always works for the first few minutes after an install and then stops working.
I'm very certain the phone is in good condition.
Should I try an older radio version.. like a 1.24 or something ?
Can I install just the tmobile radio rom?
I'm also going to install TNT 2.0 pro so I have the exact same set up as you and see if that makes a difference.
no luck!!!
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
try the way i posted in this thread http://forum.xda-developers.com/showthread.php?t=337125
ajjus said:
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
Click to expand...
Click to collapse
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Try to flash the entire UK T-Mobile ROM, then remove the internet settings and install the correct CAB for T-Mobile.
UK ROM here: http://forum.xda-developers.com/showthread.php?t=337163
PROVIDER SETTINGS CAB: http://forum.xda-developers.com/showthread.php?t=311446
a-h-t1, Junner2003 and galaxys - I'll try all your suggestions.
a-h-t1 - The first 2 steps went through fine. While I install the radio ROM as part of step 3, the installation doesn't go past 0%
I'm going try Junner2003 idea now. I'll keep everyone posted on my progress.
install stops at 11%
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
galaxys said:
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Click to expand...
Click to collapse
Hi Galaxys,
I don't think the IMEI is blocked. Or maybe it is, how do I find out? I don't have any of the symptons listed on the link you sent (don't hear the beeps or anything).
I originally had a T-Mobile wing. The LCD screen cracked (don't know how). And ofcourse TMo won't replace it.
http://forum.xda-developers.com/showthread.php?t=335346
I got 8525 from my company. It's almost new. Only used for a day on an AT&T SIM. This phone is free, and so I really don't have much to lose... so all out experimenting
Tried insalling from the micro card, even that stops while installing GSM. pissed!!! Why would the darn Radio not update???
this may sound stupid but if all else fails, why not...
my mda use to have signal then it would just disappear as well after 15 min or less..
turns out the sim card wasnt pressed in properly.. so i just put a piece of paper on top of the sim card to make it thicker and get the battery to press it down harder. and it solved all my problems...
just a suggestion..good luck
ajjus said:
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
Click to expand...
Click to collapse
See this post here for a possible reason (and technical explanation/theory) for your device stalling during radio update. The fix suggestions at the bottom of the page may help you - in particular :
Try cooling the device down a bit before flashing as the PIC chip (where your radio ROM is held) may flash more reliably/easier when cool. Don't ask why - that's from it's datasheet ;-)
The paper on the SIM card is a good idea too to rule out dodgy SIM connection - Great idea r0mmel
Even after reading this forum all nite, I am still soooo confused, maybe too much new info in m'head. At any rate, I am trying to UG from WM5 to WM6 and am having a heck of a rough time. Everything goes good until it actually starts the process, at which time I get the 260 Connection Error. After plenty of research on here, I decided to try to "flash" the ROM, to no avail, for nothing happened. I can get into bootloader mode but then nothing else happens (perhaps I'm not waiting long enough? How long should I wait?) and I never see the screen pictured here - http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing - so I just give up and reset. I am currently downloading the HardSPL utility so I can try flashing after the IPL and SPL ugrades. But I do have some questions still --
(1) Does my phone need to be "unlocked" to do this and how can I tell if it is or isn't?
(2) Can I just use the ROM that I downloaded from the HTC site or must I use one found somewhere on this forum?
Any other advice? All will be appreciated. Thanx.
Oh, yeah -- I'm working with a Cingular 8525 Hermes [HERM100 model number] Pocket PC. It's specs are:
ROM version 2.15.502.3
ROM date 04/09/07
Radio version 1.40.30.00
IPL 1.03
SPL 1.11
Have you read this http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeForBeginners ?
Re:
Yes, I have, plus all the links branched from there. After about 3 hours of reading, I felt ready to try flashing, but it didn't work. The HardSPL utility is done downloading, so when I get home I'll try that and hope I finally get a successful upgrade. If not, I'll be back to the forums. Thanx!
What ROM are you upgrading to? The official AT&T ROM? I'd try that first if you're not already.
BDsBabyGirl said:
Even after reading this forum all nite, I am still soooo confused, maybe too much new info in m'head. At any rate, I am trying to UG from WM5 to WM6 and am having a heck of a rough time. Everything goes good until it actually starts the process, at which time I get the 260 Connection Error. After plenty of research on here, I decided to try to "flash" the ROM, to no avail, for nothing happened. I can get into bootloader mode but then nothing else happens (perhaps I'm not waiting long enough? How long should I wait?) and I never see the screen pictured here - http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing - so I just give up and reset. I am currently downloading the HardSPL utility so I can try flashing after the IPL and SPL ugrades. But I do have some questions still --
(1) Does my phone need to be "unlocked" to do this and how can I tell if it is or isn't?
(2) Can I just use the ROM that I downloaded from the HTC site or must I use one found somewhere on this forum?
Any other advice? All will be appreciated. Thanx.
Oh, yeah -- I'm working with a Cingular 8525 Hermes [HERM100 model number] Pocket PC. It's specs are:
ROM version 2.15.502.3
ROM date 04/09/07
Radio version 1.40.30.00
IPL 1.03
SPL 1.11
Click to expand...
Click to collapse
What operating system are you using? If its Vista you MUST use Mr. Vanx's guide to get past the connection problem. The standard Vista HTC driver is wrong when we want to flash rom's in bootloader mode and vista WMDC. Get it here:
MR VANX's VISTA GUIDE
Hard SPL is great after that. Just remember you warranty may be void if you have to go to AT&T for repairs and the see that bootloader. You shouldn't need Hard SPL to flash the standard AT&T rom or VP3G's or other AT&T based ROM's, but better safe than sorry.
Be sure to close EVERYTHING in the taskbar! Don't start any programs, allow any updates to mess around with the computer while its flashing..In fact, I disable my AV program and internet connection totally when I flash ROMS. (My Kaspersky started updating and virus scanning during my 1st flash..sucker froze and freaked me out!)
Once I dealt with unlocking and connection issues, I flashed the standard AT&T ROM, performed a hard reset immediately and then connected via WMDC and synced everything. I tested it for a few hours then decided to flash VP3G's excellent AT&T based ROM v3.62.3..I like to do a hard reset immediately after flashing to burn everything in...I've seen others in this forum do the same.
Another ROM I've found fun is S64's(Starbase64) 3.62 WWE v9 - It's not AT&T based but you can get WPBEAR's Config files to set your Medianet and proxy. There are other At&T settings CABs out there like Dr. Puttinghams. S64 ROM also includes Advanced Config 1.1 to set your keyboard to Cingular mapping.
Good Luck!
re:
My desktop PC is running Windows XP...
After trying the HardSPL method - which upgraded perfectly - I continue to have the above-mentioned problems; 260 Connection Error and inability to move beyond the tri-color screen to the one pictured on the page which instructs how to flash via SD card.
Thanx for the list of ROMs I can try. For the record, I have been using the "official" one I downloaded from the HTC website. *sigh* I guess I'll next look for the tutorial I saw somewhere around here on how to upgrade from the tricolor screen [or something like that, I think it was], as well as your advice.
But I do have another question -- how do I format the SD card? The tutorial I used on flashing with it mentioned formatting so I'll retry it with the card newly formatted (I didn't because it said I could just delete everything off the card OR format it).
I'll let you know how it goes...
Ahhh...Sorry for your troubles...I didn't have luck catching an upgrade from the SD Card method on my 8525 either.
I know it seems a bit much but, is your active sync working correctly? Upgraded to 4.5 and all that? Can you sync and Backup all your data then try uninstal, reboot, re-installing AS?
I wonder what would happen if one tried Mr Vanx's instructions on a Win XP box?
I also had heard somewhere about messing around with when Active sync is started. Also as a last ditch, maybe try this from the HTC Wiki:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
Good luck
BDsBabyGirl said:
My desktop PC is running Windows XP...
After trying the HardSPL method - which upgraded perfectly - I continue to have the above-mentioned problems; 260 Connection Error and inability to move beyond the tri-color screen to the one pictured on the page which instructs how to flash via SD card.
Thanx for the list of ROMs I can try. For the record, I have been using the "official" one I downloaded from the HTC website. *sigh* I guess I'll next look for the tutorial I saw somewhere around here on how to upgrade from the tricolor screen [or something like that, I think it was], as well as your advice.
But I do have another question -- how do I format the SD card? The tutorial I used on flashing with it mentioned formatting so I'll retry it with the card newly formatted (I didn't because it said I could just delete everything off the card OR format it).
I'll let you know how it goes...
Click to expand...
Click to collapse
Just another tip... Try a different usb port. I've found that sometimes certain usb ports behave differently during the upgrade procedures. So, far I've upgraded three 8525's on Win XP and only one gave me the problem you've described and connecting the sync cable in another port corrected the problem.
Re: my Post
shihayadreamer said:
...I also had heard somewhere about messing around with when Active sync is started. Also as a last ditch, maybe try this from the HTC Wiki:
http://www.htcwiki.com/thread/667087/ActiveSync+and+Rom+8525?t=anon
Good luck
Click to expand...
Click to collapse
OMG! SHIHAYADREAMER! That was JUST the TICKET! I read it and realized that I'd been doing it right all along, I just didn't realize I was! THIS time, I hooked up my cable at the very beginning and let it go. Before, I'd started waiting to hook it up until the instructions asked if I had because I'd gotten to the tricolored screen (the bootloader?) the 1st time and figured I did something wrong. Thanx to that forum, I returned to what I did the very first time and got victory! *falls down sobbing and weeping with joy* I wasted 25 hours because of fear! OMG! *dances around, singing* I've got WM6! I've got WM6!
I know that being reminded to turn off my firewall and stop all the programs in the taskbar played a big role, as well. But I just give a big "Thanx" (on Thanksgiving! *LOL*) to everyone who answered this board because you all helped me so very very much.
Hi everyone,my name's Larry and I just registered to the forums. Please forgive my newness but I am in a bit of a pickle here.
I have a MDA Vario II, aka Hermes 300, that I bought s/h off ebay. Works fine,no worries, but I upgraded to WM6 because i felt browsing was a little slow and the screen graphics werent as good as I expected. The upgrade was from the T-mobile site itself and all went fine. Only thing is I dont believe this phone can handle it(needs more RAM really) and after being online a while it gets really slow,like steerig a cow through treacle at times so I came to the conclusiong it was a bad move! Now I've noticed a link on here about downgrading to WM5 but is it that easy for one with no specialised tools or knowledge(tho i did build my own PC, or should I say ahem WE did)
Also a problem the phone has developed since the upgrade is it keep deleting my email settings, even tho on the 'desktop' screen it tells me i have so many unread emails in each account! So now i cant check emails from it either!
I do hope I can sort this out cos it is really frustrating having a PDA and not being able to browse properly!
Many thanks
Larry
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
scousemartin said:
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
Click to expand...
Click to collapse
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Hermes300 said:
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Click to expand...
Click to collapse
all your question answered here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I have looked thru the wiki and cannot find the advice I need.
My device has the following on it and what I would like to know is if I can actually drowngrade the device back to WM5.
The rom version is 3.60.110.4 (T-mobile UK)
The radio version is 1.50.00.00 so I assume that it is boot 0108.
The IPL is 1.04 and the SPL 2.03.
The protocol reads as follows 32.83.7020.20H
I have come across a guide that states if the radio is above 1.27.00.00 then downgrading may not be possible.
"(NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.)" -http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
The other question I would like to ask is this - it is possible to put another verion of WM6 on with this radio version?
Thanks for any advice!
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Hermes300 said:
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Click to expand...
Click to collapse
I think you might not have gotten help 'cause it doesn't look like you've read what people pointed for you to read. Hopefully this'll help you get over the jargon hump and make progress. Having upgraded from the Offical T-Moble rom and swapped ROMs, it's definitely worth taking the time to learn how to do.
SIM unlock & CID unlock aren't the same.
If you've had you phone with T-Mobile for at least 3 month they will let Unlock you SIM (at least they do in the US). Contact them directly, you'll need an active account & phone number with them. This is free.
CID unlocking allows flashing ROMs onto your PDA. For some reason the folks at T-mobile, etc want you to have to look at their stuff every time you use a machine you bought through them. Using a cooked rom is like reinstalling XP without having AOL on your computer, makes life much better.
(flashing = installing to a PDA's Read Only Memory)
(ROM = OS + Radio + other stuff = basically everything thats on the PDA after a hard reset)
Flashing can be a dangerous thing, you don't want to 'brick' your PDA so you install an escape hatch. Hard SPL is that escape hatch.
(Brick = peice of baked clay = your PDA if a ROM install fails and you didn't install Hard SPL first)
The Hard SPL protects you if the ROM you installs fails 'cause power went out, ROM was bad, you bumped the cable, etc
http://forum.xda-developers.com/showthread.php?t=296722
Read & Follow the directions.
Select a ROM from here
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I have the same model & just installed Custel V2.5, seems to work well so far (day 2).
http://forum.xda-developers.com/showthread.php?t=364617
Good Luck
Thanks gt, and we have read advice on here but a lot of seems to be conflicting plus we seem to be just going round and round. Yep, ben there, yep read that etc.
I know the diff. between SIM and CID unlock but all I want to know is is it necessary to SIM unlock the phone to update a ROM?
I wont be using another network but will be staying with T-mobile W n W.
I did it!
Well I did it. flashed the phone with Schaps WM6 4.30 WWE.
Have noticed it runs faster than the previous T-Mobile WM6 and has some really neat features-you can adjust a lot more settings on the phone than before,quite impresed! Thanks for everyones help!