For the past 6 hours I have been trying to make the No GSM error message on my Cingular 8525 go away. I cannot use the phone to make any calls whatsoever. I originally unlocked the phone to work with T-Mobile which worked for about 2 months and now this error message. The last and only ROM image that I can load to this phone is the Schaps_WM6Pro_WWE_3.60a-0823_Full.exe. Any other ROMs I try to load either does not pass 0% or goes to 12% and freezes. I tried to follow the unlocking steps again but it ROM upgrade part would not pass 0%. So, I loaded the Schaps_WM6Pro_WWE_3.60a-0823_Full.exe again and checked the Device information. In there I do not see any radio version. The other ROM it loads also is Schaps_WM6Pro_WWE_3.54b-0804_Full.exe. NO other ROMS will load. And even if I load the 3.54b or the 3.60a ROM from Schaps and check the Device Information. It only shows the ROM version and the ROM date. Theres no info for Radio version: or Protocol version. What can cause this and also I think that is the reason why my phone is not recognizing the SIM card. I need a way to put a radio version on this phone. Also, I tried 3 different SIM cards and none works. So if someone can point me in the right direction I would really appreciate it. Thank you.
Well, here would be a good place to start... you should try posting your message there.... do some reading...
Intensefactor,
How much reading and research did you do before you attempted to upgrade the ROM on your phone? Can't be that much else you would know that Schaps ROMS don't have a radio built in.
Have you looked at the mrvanx guides and the other info availableon here?
WB
I read as must as possible yesterday and I still cannot flash any ROM with a Radio version in it. Any ROMs that does not include a radio version like the original ones I flashed can be flashed to the phone. Other than that no other ROMs can be flashed to the phone. Or even flash a radio version separately. I even tried following http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=62&Itemid=26. How can I flash a radio version to the phone? Any help would greatly be appreciated. Thank you once again.
Is there anyone that can at least point me in the right direction?
thanx god there's someone facing the same exact problem i do have ,
now XDA guru's can you please help a little bit me and this man ??? coz i've spent the past week reading this forum and the wiki to figure out a solution with out luck , frankly i was shy to ask so i wont be called a noob .
please help me to solve this problem in my hermes , now i have installed "GM360Gold-WWE_Final" and the phone is working but no radio at all and the device halts sometimes .
the main reason of this problem i guess was when i upgraded to this rom "RUU_Hermes_TMO_UK_3.60.110.4_6275_1.50.00.00_108_T est.exe"
in this thread http://forum.xda-developers.com/showthread.php?t=328626
plz at least tell me whats the problem to avoid me breaking this device
thank you all
I am in a very similar situation !!! POF or somebody please answer
Guys,
Will these threads help?
http://forum.xda-developers.com/showthread.php?p=1515122
http://forum.xda-developers.com/showthread.php?t=325748
http://forum.xda-developers.com/showthread.php?t=322231
WB
Maybe i'm the unlucky one out of the bunch. Now myphone is stuck on the tri-color screen with HERM100 IPL-1.04 on the top left and HERM100 SPL-2.03 under it. The only way I can get my phone to come on is with the 3 key soft reset. If I hit the power button on the phone all it does is show the green light on the top of the phone. So, I cannot even hit the power button to get the phone on no more. I have to Hold the Power, OK and the Soft reset buttons just to get to the tri-color screen now. If I try to flash any ROMs without a radio, it goes to 1% then the phone reboots and goes to a blank screen again. If anyone have any other ideas. Please reply to this post. Reading and reading hasn't really gotten me anywhere. Maybe some explanation from someone might help now. So, please if someone help give me some advice, I would appreciate it. Thank you.
intensefactor said:
The only way I can get my phone to come on is with the 3 key soft reset. If I hit the power button on the phone all it does is show the green light on the top of the phone.
Click to expand...
Click to collapse
I have exactly the same problem, someone must be able to help us
Can you contact me via MSN messenger at: [email protected]
or if you don't have MSN let me know what you have so we can chat
What exactly were you flashing onto the hermes when the problem of the blank screen and green light began?
Related
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
Touch Pro Bricked
Ok so I am a noob and at least I admit it!!! I had been having problems with the display scrambling on my flashed to cricket sprint touch pro so what I did was install Hardspl 37 and tried to do a new flash. I last saw my display say that a problem occurred while flashing to the new rom and now I get nothing when I power up. I have tried hard reset I have tried soft reset I have tried about a million different key combos and I get nothing just the backlight pops on and nothing beyond this point. I get nothing when it powers up ...no startup sounds nothing...Just the backlight pops on and then nothing PLEASE HELP!!!!!!!!!!!!!
IS THIS PHONE A 300.00 paper weight???
Ok so Heres what I have done.... I started the flash from my pc but it didn't take so then I put hard spl 37 on my sd card along with raphimg.nbh and since then I get nothing like I stated above??? also bootloader wont come up the phone powers up but doesnt vibrate like it used to and I get just the backlight??? Some one on another site said to try to manually get into bootloader but I don't know how any suggestions would be greatly appreciated.
Should try pressing volume down button while reseting till you get to bootloader. If not, then...
Oh, and hardspl you want to use is ver 1.90 by Oli Nex. Not sure which one you used.
see bellow
http://wiki.xda-developers.com/index.php?pagename=Raphael_HardSPL
Another thing that might have caused this is flashing gsm rom on cdma device (which is your case I suppose - Fuze). Make sure that rom you are flashing is for your device (either raphael (gsm) or fuze(cdma) ).
To get into boot loader hold down the vol down key while turning on the phone.
Best way for you to try is to take out the battery, put it back in, hold down the 'volume down' button on the side and press the power button.
Sorry that's all i can help you with. Hopefully someone else has had this happen and knows a way out of it
lindenny50 said:
Touch Pro Bricked
Ok so I am a noob and at least I admit it!!! I had been having problems with the display scrambling on my flashed to cricket sprint touch pro so what I did was install Hardspl 37 and tried to do a new flash. I last saw my display say that a problem occurred while flashing to the new rom and now I get nothing when I power up. I have tried hard reset I have tried soft reset I have tried about a million different key combos and I get nothing just the backlight pops on and nothing beyond this point. I get nothing when it powers up ...no startup sounds nothing...Just the backlight pops on and then nothing PLEASE HELP!!!!!!!!!!!!!
IS THIS PHONE A 300.00 paper weight???
Ok so Heres what I have done.... I started the flash from my pc but it didn't take so then I put hard spl 37 on my sd card along with raphimg.nbh and since then I get nothing like I stated above??? also bootloader wont come up the phone powers up but doesnt vibrate like it used to and I get just the backlight??? Some one on another site said to try to manually get into bootloader but I don't know how any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
Step 1. Take a deep breath
Step 2. Search and read... sounds frustrating buts lots of devices have been brought back from the dead.
Step 3. Get the phone to bootloader mode (three horizontal color bars)
Step 4. Read some more or read other posts on what to do because I can't help past this!
I think you may have used the wrong SPL so start looking there.
I saw what Bauerpavel just posted... good stuff
If you can get to bootloader mode you should be able to start all over again from here
http://forum.xda-developers.com/showthread.php?t=448008
If you're running a Sprint Touch Pro, most of the roms here are not for your phone. May want to try ppcgeeks.com
bauerpavel said:
Make sure that rom you are flashing is for your device (either raphael (gsm) or fuze(cdma) ).
Click to expand...
Click to collapse
Just to be clear, not to be confused with the AT&T HTC Fuze, which is a GSM device!
But you're with Sprint, so assuming you're in the US, you have a CDMA device. Check the CDMA forum at the top level of the Raphael forums. There will be lot's of good advice there on the specifics for that hardware.
Good luck!
bauerpavel said:
Oh, and hardspl you want to use is ver 1.90 by Oli Nex. Not sure which one you used.
see bellow
http://wiki.xda-developers.com/index.php?pagename=Raphael_HardSPL
Another thing that might have caused this is flashing gsm rom on cdma device (which is your case I suppose - Fuze). Make sure that rom you are flashing is for your device (either raphael (gsm) or fuze(cdma) ).
Click to expand...
Click to collapse
Fuze=AT&T=GSM
Sprint TouchPro = CDMA
If you tried flashing a GSM ROM to a CDMA phone you may be up the creek!
i just bought my hd2 fromt-mobile and naturally couldn't resist but to modify it
So i installed and flashed the HSPL2 with no problem it worked perfect and very fast and easy....and i installed Mesus Rom and love it did my registry tweeks got the phone running awesome!!!
Now i woke up early was browsing on htcpedia and glanced at the new DOPOD version radio.... well..... it installed fine no errors but when it got to 100% to reboot BLACK SCREEN. I've tried getting the phone into bootloader mode nothing, tried a master reset holding down the volume up and down at the sometime and press power nothing, i've tried to plug it in the computer it recognizes it my computer makes the connected to a device noise but when it goes to initialize the hd2 i get this driver error:
Qualcomm CDMA Technologies MSM failed.
i've also read once u have hspl or hspl2 installed it can not be bricked can someone please help me on some step by step and some links
the radio i flashed that caused this was 2.051.03(DOPOD)
poulosjr said:
i've also read once u have hspl or hspl2 installed it can not be bricked can someone please help me on some step by step and some links
Click to expand...
Click to collapse
I hope so for your sake, however... When you say you have a HD2(T-Mobile), do you mean the US one?
Flashing guide for TMOUS HD2 states:
mskip said:
PLEASE READ ALL THE INFORMATION IN THIS GUIDE BEFORE INSTALLING HARDSPL OR FLASHING A ROM/RADIO. IF YOU FLASH AN INCOMPATABLE ROM OR RADIO ON THE 1024LEO THEN THERE IS A POSSIBILITY OF BRICKING YOUR DEVICE SO PLEASE BE VERY CAREFUL!!
Click to expand...
Click to collapse
poulosjr said:
the radio i flashed that caused this was 2.051.03(DOPOD)
Click to expand...
Click to collapse
Is that this one (2.09.51.03)?
Says in the post there it doesn't support 576MB RAM. That would probably mean it's not compatible with the TMOUS HD2. I vaguely remember that being the case for any version with 51 in it.
Sorry to be completely unhelpful here, but I wouldn't have a clue on how to revive your HD2.
Perhaps people in the TMOUS HD2 Flashing guide thread might know something?
----
meptik
chalk another non-starter up to a ..51.. radio on a tmous phone.
still not seen a fix
is the tmobile us hd2 recoverable or is it bricked out?
sorry, not sure. see other threads HERE (post three) and HERE , , it's also mentioned in the mtty and the HSPL (regular HSPL and tmous HSPL) threads.
As far as i can gather so far, roms below 2.10 cause not to boot, but can recover from bootloader, radios with a ..51.. in them cause it not to start at all. (because ..51.. radios don't support the 576mb, presumeably)
Best of luck.
I am having the same problem...I can boot in to bootloader mode and in to restore mode but there is no display on the screen the computer detects it and everything and I can flash the phone, but nothing ever comes up not the tmobile screen or anything...I had this problem when I first got the phone only the backlight would come on, but I took the battery out for a few minutes and then it worked fine until the battery died then the problems started again, then I flashed it with the with the latest tmobile us official rom I could find and it worked until I turned it off and then I could not get it to turn on again. I somehow through some voodoo or something after trying the restore feature like 20 times got it to come on, the I had to take the battery out to put in the sim card and now nothing...The thing I can't understand is why windows recongizes the phone and I can flash it but nothing changes nothing just a blank screen with the backlight on I can attach to it with mtty and everything I ran a task 28 and task 29 and reflashed it nothing I have tried cooked roms and everything still no display...Someone please help...I plan on returning it for a new one except there are none in my entire state, I have called every tmobile store in the phone book and none know when they will get more in...
brandon2004 said:
I am having the same problem...I can boot in to bootloader mode and in to restore mode but there is no display on the screen the computer detects it and everything and I can flash the phone, but nothing ever comes up not the tmobile screen or anything...I had this problem when I first got the phone only the backlight would come on, but I took the battery out for a few minutes and then it worked fine until the battery died then the problems started again, then I flashed it with the with the latest tmobile us official rom I could find and it worked until I turned it off and then I could not get it to turn on again. I somehow through some voodoo or something after trying the restore feature like 20 times got it to come on, the I had to take the battery out to put in the sim card and now nothing...The thing I can't understand is why windows recongizes the phone and I can flash it but nothing changes nothing just a blank screen with the backlight on I can attach to it with mtty and everything I ran a task 28 and task 29 and reflashed it nothing I have tried cooked roms and everything still no display...Someone please help...I plan on returning it for a new one except there are none in my entire state, I have called every tmobile store in the phone book and none know when they will get more in...
Click to expand...
Click to collapse
sounds more like a dodgy phone than a bad flash. wait for stock and get it exchanged.
bricked
I have the same problem. I just wanted to go back to stock rom and i downloaded this bull crap rom
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship.exe
BRICKED MY TMOBILE USA HD2!!! DO NOT LOAD THIS ROM!!!!
took it to the tmobile and i now have to wait till tomorrow for them to get more in stock... im pissed!!!
sk8er982 said:
im pissed!!!
Click to expand...
Click to collapse
i really hope you mean pissed at yourself, that rom is about as far away from compatible as they get for the tmous.
Cannot believe we don't have a sticky warning about xx.51.xx radios and TMOUS HD2s yet!
i am...
samsamuel said:
i really hope you mean pissed at yourself, that rom is about as far away from compatible as they get for the tmous.
Click to expand...
Click to collapse
i am pissed at myself. anyway i got a new phone now.
how do i go back to original firmware if i flash a cooked rom?
they need to remove the .51 versions, i just bricked mine and all i saw really was to not install it, not that it would completely brick it. I'm really upset.
donalgodon said:
Cannot believe we don't have a sticky warning about xx.51.xx radios and TMOUS HD2s yet!
Click to expand...
Click to collapse
I hope that was sarcasm LOL
sk8er982 said:
i am pissed at myself. anyway i got a new phone now.
how do i go back to original firmware if i flash a cooked rom?
Click to expand...
Click to collapse
That info is still in the same thread that y'all should have read before bricking your HD2's. Many (and I mean many) of us flash our HD2's all the time, run ROM's custom built to even let us run the latest and greatest Android builds available.
When you and the OP (iirc) get some fresh HD2's, read the info and links in the stickies here. There's enough info in those to get you well on your way to mastering your HD2's destiny.
Best of luck.
So true. ALL chefs always warn ab NOT flashing .51 radios on TMOUS HD2 or they posting links to HOW TO FLASH TMOUS HD2.
Dont rush with first flashing! Thats the best way to brick ur phone!
Always read the forum! Thats the bast way to make ur phone happy
htc hd2 after installing andriod
hey everybody.... I have a big problem with my phone which is when the fixer tried to install android on it it become freezing (black screen and just vibert)
so he told me that he has no idea and my phone will not fix ...so please help me out..
sherko_bax said:
hey everybody.... I have a big problem with my phone which is when the fixer tried to install android on it it become freezing (black screen and just vibert)
so he told me that he has no idea and my phone will not fix ...so please help me out..
Click to expand...
Click to collapse
it is tmous yes? it sounds like he flashed a bad radio,
If that is the case, i would be MAD AS HELL and demand they pay for the replacement of teh motherboard.
hello folks,
first off thanks to all the people who help make this forum better and better.
have used you're help a few times especially trying to flash a rom. but now there's a problem... I've installed artemis Rom a couple of times but I wanted the newest so I've downloaded it, flashed my hd2 with task29 like always. pressed vol. down button it restarted until white boot screen. ok, possible, so I reset it and press vol. down again. but still white boot screen. after trying it for 70(!) times. I used the forum. saw that maybe hooking it up to pc and starting custom rom .exe should work. but no. wont even start when hooked to a computer. so please help!
Info:
Cotulla hspl 1.42.00
Task29 by dooloop performed( got stuck after that)
Rom Artemis. 31.5 (current) 35.1 (wanted to install.
Thanks In Advance
Maajelvv
Two possibility's;
Tray to do a hard reset,
Ore tray to install Stock Rom!
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
I'm out off Idea; tray to send Sir Sternas a PM with your question, maybe he get some Ideas; ore tray to ask this question on the Artemis Thread, there are also helpful peoples out there!
Edit; I just add your question on the Artemis thread!
http://forum.xda-developers.com/showthread.php?p=8450678#post8450678
you haven't made hard reset. if you wont to do hard reset you have to press both volume buttons and then pres power buton ( or press red button near batery ).
also try to make a goldimage ( search the forum ).
regards
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
As Luka1111 said, you haven't done a hard reset. Check this out:
http://www.smartphonegurus.com/forums/topic/8829-hd2-how-to-soft-reset-hard-reset-and-place-in-bootloader-mode/
Dmm;
That I didn't see/read it correctly the way he did a hard reset??
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
What´s the size of your SD-Card? Flashing from SD works only with max. 8 GB - Card, 16 GB or more won´t work! (Own experience!)
Can you connect your device to ActiveSync? Or otherwise stated: What happens when you connect your device to your PC? Does ActiveSync or Windows Mobile Device Center even startup?
BTW, what happens when you start your device now? Does it hang or just load your old Artemis version??
regards, Kuzibri
uli71 said:
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Click to expand...
Click to collapse
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hey guys,
maybe you haven't read my whole posting: Have you tried to get access to tricolor bootloader without pluged in SIM and SD?
If you had trouble with your answer button before flashing, is it possible your volume button is also without function? Therefore it seems to be a hardware problem.
Sorry, if this is not the answer you would like to read, but the advise to test without pluged in SIM and SD is my last. Entering bootloader is a basic system feature, as far as I know.
Best regards,
Uli
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hi,
I have send you a PM. Please read this ASAP!!
regards, Kuzibri
Hey Uli,
I've tried both. with and without sim or SD cards. still no functioning....
I've thought about the fact that it might be broken but it worked right before flashing....
thanks for your efforts though..
Maajelvv
As I already mentioned, this poor guy has a major problem with his device, which seems to be hardware related (either volume down button does not work or the on/off key). After having extensive contact with him by phone, the only solution seems to be to bring it back to the store to let it repair. Unfortunately, he will have a great chance to loose his warranty, because HTC probably will be able to found that there is another ROM installed. Whish Maarten good luck with his problem!! Also very sorry I could not help you to solve your problem. I'm personally very disappointed by that!
regards, Kuzibri
Hello guys i have a problem with my HTC HD2.
I have searched a lot on this site before posting my problem.
This is what happens and what i did:
The phone doesn't pass the white HTC screen with the RGD letters below.
What i have tried:
HSPL 2.08.HSPL, 1.66, 1.42, 2.08.000
Radio: Leo_RADIO_2.08.50.05, Leo_RADIO_2.15.50.14
Roms: Stock Vodafone (Dutch) rom, Energy rom
Hard reset (vol up +down on startup).
Tried task 29 and started everything all over again
I went to the a phone store, they couldnt help me. Afterwards i went to the official store but i don't have my receipt anymore so i don't have a warranty..
So i think i have tried everything i could find on this forum. Tried most of the HSPL versions with diferent roms. But all of them stay on the startup screen (white htc start screen)
If someone can help me please, this is really my last chance
Thanks,
Issam
ps. i hope this is the good section to post this problem.
Well the phone starts up now (it actually works for a few minutes!). I haven't changed anything, the only thing i did is leave the battery out for like 1 hour. But everytime i start up the phone it freezes and / or turns of after 1 min or something. Sometimes it doesn't even boot up like the usual problem, but then i remove the battery for 10 minutes and it boots normal again.
So i really don't have a clue
i was experimenting all day again with my htc.
What i found out was, the longer i keep my battery out of the phone the longer i can use it.
For example: I had the battery out of the phone for about 2 hours, when I put it back in i could use it for like 10 minutes.
But when i keep the battery out for 10 minutes it freezes within 1 minute.
Maybe this will help me get the solution to this problem.
I would format the sd card just in case, also make sure you have the correct versions of what you need, rom raido ect, because theres two types of HD2s, hope this helps!!
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
IssamRazza said:
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
Click to expand...
Click to collapse
You should remove hspl , and after that install the latest rom available on htc site for your device (download the rom from htc site, with your serial number ) . Official roms have included radio inside of them. If HSPL is removed and you have again problems with your device with an official rom installed, then you have a hardware problem. You could try to boot up without sd card installed, to see if the card is the problem.
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
IssamRazza said:
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
Click to expand...
Click to collapse
I see that you are on t-mobile network , so you should download your rom from here: http://www.t-mobile.com/wmupgrade/ . Just enter your imei and download the update. Remove HSPL and then install the official rom. Perform a hard reset after that , and see if is all ok . Keep us informed pls.
Hi, yes i have a T-mobile contract, but my phone is Vodafone branden so i'll have to download the Vodafone version I think.
But what i just did is this:
I had HSPL 2.08.HSPL and a Custom ROM on it. So I was planning on maybe sending it back. Thats why I performed a task 29 to delete all the previous (parts of the) Roms. After that i changed my HSPL to 1.66.000, the original spl I had on it.
But now the phone does vibrate when i hold the power butten (with vol down), but there is no picture, so i cant get into the phone or the Red green blue screen. So i think the phone will not boot because I deleted the Rom on the phone and also returned the spl to original.
Is there a solution for this problem? omg this phone just doesn't seem to be working for me (maybe it's me that is not working for the phone).
It is normal since you did a task29. Verify if you did it correctly here http://forum.xda-developers.com/showthread.php?t=644781
Yes i have read that thread thank you, but the question is:
How can i get the phone to connect with my PC, so I can install original ROM. Because the Boatloader screen won't start up, to make connection with my Computer. I press the power button and vol down butten at the same time. Tried it at least 20 times
Thanks you all. But i sent this phone back to HTC. The board was replaced and they sent it back, so it works again! finally my phone back