Hi All
Need help ! Any program that can allow to view chinese character as well as input chinese character? Have tried CE Star but it always hang my SMS screen (will get blank white screen). Wanna try Monster but no crack. Can anyone please help??
Also, any good place to download games??
Thank You !!
Lemz
Ce-star has no problem. You are using a cracked version so it GIVES you problem.
check this one out. it works.
http://www.studiokuma.com/wm/?section=support
yingfsu said:
http://www.studiokuma.com/wm/?section=support
Click to expand...
Click to collapse
Ya! that's right! Stark Wong is the man! I've tried Youzii's EVOen with "IMonly", Gullum's V7, Crystal V1 and Claudyfa's Transformer V1 with both ime-mingliu and ime-msjh aleady. The result is one step from perfect --the automatic word-suggestoin fails after installing the cabs above. Other than that, everything works like a charm!
yingfsu said:
http://www.studiokuma.com/wm/?section=support
Click to expand...
Click to collapse
It only support Chinese Traditional ,Does any .cab support Chinese Simplified.
Thank you!
leeleeguo said:
It only support Chinese Traditional ,Does any .cab support Chinese Simplified.
Thank you!
Click to expand...
Click to collapse
View simplified Chinese by setting Chinese China on the page of Local Settings ('m not sure whether the needed nls has been changed in your device^^)
Hi Story
I did not use the crack version. Mine was a registered version. but some how it cant load the sms page.
Thanks all. The solution above does not support simplified chinese. Is there any other software beside this?
Hi lemzjo,
Have you tried the latest CE-Star?
I only encountered some errors when using older version.
BTW, don't just verify v2.8r3 - it often shows "v2.8r3" but has different build I think.
Also, both Simplified / Traditional Chinese I used.
You're eligible to email to Mobem support and ask for the latest one.
Hi Mewwoo
Thanks. I tried using the latest CE-Star however I can't seem to register. I used my old Serial and key that was given to me previously but it can't be registered. My software will keep saying its unregistered, not sure why. Any Idea?
Thanks
楼主也是国人啊！
那么down个雅黑安装包吧。要不上xbeta上，很多学习的。
lemzjo said:
Hi Mewwoo
Thanks. I tried using the latest CE-Star however I can't seem to register. I used my old Serial and key that was given to me previously but it can't be registered. My software will keep saying its unregistered, not sure why. Any Idea?
Thanks
Click to expand...
Click to collapse
Yes, it always happened - That means you actually using different version of CE-Star.
Don't worry about the regestration - I always ask Mobem to send the valid serial no when I encountered kinda problem.
You've bought their product and you're eligible to do this.
Cheers,
Related
Dear all,
Does anyone know how to make Window Media Player recognize Chinese Characters. I have tons of Chinese songs and none of the titles can be read.
Thanks in advance
I have the same question too.
On the other hand, Ken, do u have solution to display chinese in WM5 (not WMP10 and PIE). I have installed a chinese pack for 2003 on the WM5, it is OK to display chinese filename but makes mess on showing Date and Time even on Today screen. And, as I know, CE star has been verified not to work on WM5.
Any suggested solution.
Knife Chinese is working generally but not for WMP and PIE still. Monster Chinese SIP is ok for Chinese text input.
Thanks Chris. I will try those.
Hi, Chris,
Knife seems not to be able to install on WM5. I have tried several times, but failed. What is the version you could install?
Hi, Chris,
Knife seems not to be able to install on WM5. I have tried several times, but failed. What is the version you could install?
Knife chinese ->
www.gismosoft.com
v 3.20
Monster Chinese is a famous software. You should be able to find it. Can only install SIP, not the core system of monster chinese.
Make sure that they are install on the device, not storage card.
See the pictures.
chris_khho said:
Knife chinese ->
www.gismosoft.com
v 3.20
Monster Chinese is a famous software. You should be able to find it. Can only install SIP, not the core system of monster chinese.
Make sure that they are install on the device, not storage card.
Click to expand...
Click to collapse
I can't fine the v3.20 at the website. Could u give a link?
finally, I have found knife v3.2 & v3.7. but whichever I installed, it failed.
Oh, I got a version 3.7 on www.penpower.com.hk, it's ok. Together with Monster Chinese SIP, it can display and input chinese on WM5 now. But there is still mess display in PIE and Email.
Thanks for buddies!
Where to download
Hi Chris and negatong
Where can I download MonsterSIP and KnifeChinese? I follow the link above, but not result.
Thank in advance.
Ric
Chinese
hi, i am japanese in china and i used try to make WM5 to chinese/japane machin, but as you know, the important file of wince.nls in windows folder, cant replace to another one. this wince.nls can make encode china and japane. Monster chinese/Cinese Star/Knifes also replace this.
(actuary, it can replaced, but cant effect)
But the old version of wince.nls cant efect in WM5.0. we have to wait chinese/japanese WM5 SDK to get wince.nls.
without effective this, no way to IE/e-mail
(in the inbox,UTF-8 can use for chinese.but not all the time)
So many encoding Softwares such like you tried, cant install or cant encode to chinese complietly.
following a my site to dicribe chinese/japanese input and encode on WM5
http://asukal.seesaa.net/pages/user/search/?keyword=Windows+Mobile&blog_id=18554
Re: Where to download
rmhtoh said:
Hi Chris and negatong
Where can I download MonsterSIP and KnifeChinese? I follow the link above, but not result.
Thank in advance.
Ric
Click to expand...
Click to collapse
Dear,
Thanks to negatong, here is the link http://www.penpower.com.hk/
lol i can acess the link but i cant seem to download
technician-2s said:
lol i can acess the link but i cant seem to download
Click to expand...
Click to collapse
those links help you!!!
http://www.mobem.com/products/cestar2003.php
http://www.hi-pda.com/forum/viewthread.php?tid=215892&sid=pzcAoc
CEstar2003
Asukal said:
technician-2s said:
lol i can acess the link but i cant seem to download
Click to expand...
Click to collapse
those links help you!!!
http://www.mobem.com/products/cestar2003.php
http://www.hi-pda.com/forum/viewthread.php?tid=215892&sid=pzcAoc
Click to expand...
Click to collapse
Can CEstar work on WM2005?? I don't think so.
Between, I have already downloaded MonsterSIP 4.02 and knief V3.7. But after I installed, it don't seem to work. I still see ???? for received chinese sms. I can sent chinese sms out.
Any idea what happen?
Thanks
Ric
Re-CE Star or any other chinese plat form softrware.
PLS see my post up above! dont work, just SIP can work.
http://asukal.seesaa.net/article/2615541.html
this can see the pictures of SIP working on my WM5
Instead of Knife Chinese system, you could just install a Chinese Pack (I tried to upload to FTP but failed). With that, Chinese can be displayed but still mess in Pocket IE, Word and Email. That may only be solved by an updated Wince.nls captured from a chinese version WM5 device in future.
negatong said:
Instead of Knife Chinese system, you could just install a Chinese Pack (I tried to upload to FTP but failed). With that, Chinese can be displayed but still mess in Pocket IE, Word and Email. That may only be solved by an updated Wince.nls captured from a chinese version WM5 device in future.
Click to expand...
Click to collapse
i agree that, i tried many versions of wince.nls, ppc2002/2003/wince.net, also i edited previous wince.nls by binary editor and hexeditor, but still no use. just wait for becomming one!
Simple chinese/Japanes e-mail in inbox, can be displayed if it was sent with encode of UTF-8(sorry no test for Traditional Chinese)
You can see the captureed screen.
http://asukal.seesaa.net/article/3006810.html
also tried to edit registry for encoding, the "encoding to Japanese" in pIE can be seen, but no work.
just Date display of Today Screen, i got it by editing registry.
My be cant display following registry correctly in this site,
please see the capture screen at
http://asukal.seesaa.net/article/2624425.html
Japanese sitebut screen capureded can see.
[HKEY_LOCAL_MACHINE\nls\overrides]
"STime"=":"
"ITLZr"=dword:00000001
"ITime"=dword:00000001
"STFmt"="HH:mm:ss"
"LCID"=dword:00000411
"S1159"="AM"
"S2359"="PM"
"SLDte"="yyyy'年'M'月'd'日' dddd"
Found here
http://forum.xda-developers.com/showthread.php?t=401679
anyone got this working on the touch dual? I've tried to install but get an error - NOT COMPATIBLE WITH YOUR PHONE. i'm running 6.1 on my dual!
Any help is much appriciated.
weird i get the same message
i have it working on my niki. there is a modified cab available which has been de-certified.
you must then patch the meta file for each map so the map is authorised for use on your handset! it only works with v7 maps!
its pretty quick, not much has changed. the type face is a little too big for qvga, but it works.
EDIT:
there is now a QVGA version, see link in post #7 in this thread.
Minty, can you link it, I can't see it in the other thread. Cheers.
Have a look HERE....
Maybe it could work.....
thanks flavio
im not sure if that is the modified one for QVGA screens, if not, try this one
http://www.megaupload.com/?d=MJRRV63O
(not my work, so dont credit me)
minty1978 said:
im not sure if that is the modified one for QVGA screens, if not, try this one
http://www.megaupload.com/?d=MJRRV63O
(not my work, so dont credit me)
Click to expand...
Click to collapse
This one works for me
ok guys i got tomtom working on my touch dual, however cant download any maps. I installed tomtom7 on my tytn ii and managed to download the free map - it is currently working ok on the tytn. when i port this map over to the touch dual, i get an error saying that the map is not compatible?
winwiz said:
ok guys i got tomtom working on my touch dual, however cant download any maps. I installed tomtom7 on my tytn ii and managed to download the free map - it is currently working ok on the tytn. when i port this map over to the touch dual, i get an error saying that the map is not compatible?
Click to expand...
Click to collapse
You need version 7 maps, available at all good online outlets ;-) and you need to run a keygen on them to make them work with your device. I have tomtom 7 working from a straight install cab on my Niki and my Artemis, and UK map 7.20 (latest one, google for it! Or PM me, I suppose) which then needs a different keygen running on it for each device you're going to install it on, ie the activation key for the map is tied to your device, which is why you can't copy the map over from one device to another.
official purchased maps do not require a 'keygen'.
i tried to install the TomTom_Navigator_7.450.9028_repack2.cab but the setup doesn't start... i come to the questio where i want to install it but then it stops without error
Hi guys, I installed the new tomtom 7 on my dual and when I try to start the APP appair a windows that say unable to start. not enough memory is avaiable. What's the problem? I think to have a good level of free memory.... sorry for my english and thanks
fyase said:
Hi guys, I installed the new tomtom 7 on my dual and when I try to start the APP appair a windows that say unable to start. not enough memory is avaiable. What's the problem? I think to have a good level of free memory.... sorry for my english and thanks
Click to expand...
Click to collapse
which version did you install?? this one TomTom_Navigator_7.450.9028_repack2.cab ??
gatto79 said:
which version did you install?? this one TomTom_Navigator_7.450.9028_repack2.cab ??
Click to expand...
Click to collapse
yes I installed this one
it worked fine on mine, try running it after a soft reset...or makesure all your programs are closed before running it.
what ROM are you running? mine is a HTC standard one from AUS.
as for not installing..not too sure, try the above also.
I also try to install and start the app after a Hard reset but nothing.... I have always the same error... my ROM is the original TIM italy
minty1978 said:
it worked fine on mine, try running it after a soft reset...or makesure all your programs are closed before running it.
what ROM are you running? mine is a HTC standard one from AUS.
as for not installing..not too sure, try the above also.
Click to expand...
Click to collapse
i have installed this RUU_Nike_HTC_DE_1.31.407.09_Ship
it does run no problem on my dual i have black repack3, v7 maps and it works great. you must have done something wrong some were. Try it again etc
.............
Hi all,
This is my first ROM it's the stock ROM for devices shipped in Egypt. I have followed the process as in the kitchen thread but I don't know how to make sure if this ROM is working properly or not. So hope one of you guys can test it and tell me.
By the way I don't encourage anyone to use this one except those looking for warranty as the GPS is disabled in this ROM.
http://rapidshare.com/files/185914134/WWE_ruu_signed_1_90_485_3.part1.rar
http://rapidshare.com/files/185885890/WWE_ruu_signed_1_90_485_3.part2.rar
Finally I would like to thank jcespi2005 and karimartine for their support. Wish you all good luck.
thanks
Thank you very much...i am downloading the ROM right now...i am very angry yet from HTC for doing such deceving for us in egypt...by the way what u did for the arabic support hadve u contact them or downloaded it from somewhere ?
Please our heros we need help to varify the ROM is Ok.
massoh said:
Thank you very much...i am downloading the ROM right now...i am very angry yet from HTC for doing such deceving for us in egypt...by the way what u did for the arabic support hadve u contact them or downloaded it from somewhere ?
Please our heros we need help to varify the ROM is Ok.
Click to expand...
Click to collapse
Yes, check this thread and my discussion with taiseer, he is really a nice guy and made a good job.
By the way if you are not intending to use arabic interface (i.e just reading and writing I encourage you just to use Mobidiv 416 and the keymapper to support the Hardware Keyboard.
http://forum.xda-developers.com/showpost.php?p=2752605&postcount=22
http://forum.xda-developers.com/showpost.php?p=2815285&postcount=33
Cheers,
thanks man...u r great...
microfox said:
Hi all,
This is my first ROM it's the stock ROM for devices shipped in Egypt. I have followed the process as in the kitchen thread but I don't know how to make sure if this ROM is working properly or not. So hope one of you guys can test it and tell me.
By the way I don't encourage anyone to use this one except those looking for warranty as the GPS is disabled in this ROM.
http://rapidshare.com/files/157208769/WWE_ruu_signed_1_90_485_3.part1.rar
http://rapidshare.com/files/157210046/WWE_ruu_signed_1_90_485_3.part2.rar
Finally I would like to thank jcespi2005 and karimartine for their support. Wish you all good luck.
Click to expand...
Click to collapse
Just a kind request to check out the links of the two parts as they are no longer working, and have this message "This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times." "This limit is reached" and I urgently need this ROM.
Hope to help me.
Thanks in advance
nqbu said:
Just a kind request to check out the links of the two parts as they are no longer working, and have this message "This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times." "This limit is reached" and I urgently need this ROM.
Hope to help me.
Thanks in advance
Click to expand...
Click to collapse
Links updated in the first post.
THANKS...
microfox said:
Links updated in the first post.
Click to expand...
Click to collapse
Many Thanks,
The connections through RapidShare is not allowed in my work. So, I'll dowload it once I get home then I'll let you know the result.
Thanks again
That's it
Works Great, Thanks a lot
Hi microfox,
Could you please provide us "What you did to enable the GPS"?
I get my Jade "Touch 3G" from Egypt and want to enable GPS.
Thanks a lot
I thought Jade had no GPS ship installed. Please correct me if I'm wrong. If it exists the only thing to do is to download the middle east rom from HTC site, it will be enabled by default 9again if GPS exists). Just go to support page, choose either the arabic or wwe rom, put your serial number and download. The rest is easy: connect to activesync, have more than half battery full, double click on the exe file you downloaded, follow the steps, and voila!!!
knox203 said:
VitaPSG,
You would be more likely to get help by starting a new post, rather than piggy-backing someone else's post.
Just a tip!
- Adam
Click to expand...
Click to collapse
Here it is !
(I'm french and I live in Paris, please forgive me for my bad english !)
Hello everyone !
I'm a new user of the HTC Touch Pro.
I've successfully cidunlocked my phone. (When I'm going into the bootloader, i can read "1.90 olinex")
I'm currently using this rom : "|RAPH|6.5|ROM|WWE| ★ EnergyROM 3.0 'Phoenix' (21812) ★ || Build date 2009/6/12 ||"
I'm also using "Raphael Radio 1.14.25.35"
I've got several problems with my phone :
First of all, I'd to change the hardware keyboard in order to put it in french :
Rottis said:
FOUND IT!!
I tested this myself on an swedish raphael, and it works perfectly!
1. Install a Registry Editor program if you already don't have one. I use PHM Registry Editor found here: http://pocketland.de/util/getdownload.php?regedit.Mrln_ARM.cab&id=22357
2. Go to HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD
3. Search for Curlang
4. Change the value of Curlang to 1044 (means Norwegian-bokmål)
5. Soft-Reset
6. Enjoy!
Hope this helps you guys out there to finally install those cooked roms without keyboard issues
I almost gave hopes on this one, after many many hours of googling and testing it worked, how relieved i am now!
Click to expand...
Click to collapse
I've tried : i've changed the value of Curlang to 1036 in order to put my keyboard in french but nothing has changed !
Please help me !
Black C5 said:
You may find some help on this thread...
http://forum.xda-developers.com/showthread.php?t=425045
Click to expand...
Click to collapse
I've tried this way but with no results ...
Help please !
Hattori_Hanso said:
Hello everyone
The rom turned out very well, only that trouble of mine with him, how it does not distribute the level of a battery properly. I see the good level after a reset always only. This is enough serious error because of that. Please help me.
Click to expand...
Click to collapse
We've got the same problem here ...
I'm also forced to do a phone's soft reset when i'm connecting it to my laptop (usb connection) or when i'm charging my battery's phone !
I was also wondering if you'd be king enough to indicate me a substitute for WMP, that could read videos with an "avi extension" (.avi) ?
(I've tried a cracked version of the "Pocket Player" but it wasn't functionning well on my phone ; actually it was crap ...)
Hope you'll understand what i'm trying to tell you all !
And again i'm apologizing for my bad english !
Best regards,
Thanks !
Anyone, please ?
VitaPSG said:
Anyone, please ?
Click to expand...
Click to collapse
not really sure what the issue(s) are but I think you need a FRENCH ROM.
The thing is i'd like to stay with the energy rom because it's a great rom ... but i'd also like to have a french keyboard ...
I really don't want to put a french rom on my phone, because i think there is no french rom which is as great as the energy rom.
I have another issue with my phone : sometimes when i've just end the connection with my laptop i get this message : ""nameoftheapplication".exe is not a vaild pocket PC application"
Whan can i do about it ?
I have a Dakele 3, and can not install anything from Google . Also the ROM seems Chinese, even after updating from needrom.com
I want it all to change to English and be allowed to use not China as home location.
Can anybody help? ( I have no experience at all! )
Thx!
I found that tutorial to root it. It works!
Now I am trying some other ROMs. Let you know what I can find out
androidground. com/how-to-root-on-micromax-a190-canvas-hd-plus/
Got now all the google stuff running, with installing the Dakele ROM over the posted software. And then I installed the google pack from the app section as well. Also over that rooting software. Works well! :good:
How do you like the phone so far? How are the 3G/4G networks? Are they working? Also, what country are you using it on? I would be happy if you could post some photos.
Best regards,
So far so good. It is fast and nice looking. Unfortunately I can not test 3g or 4g because Canadas network bands are not supported by the phone.
Here some pictures:
and some others
Thx, and another question about the Dakele3
suuuunto said:
and some others
Click to expand...
Click to collapse
Thanks for your reply about the ROM; you mentioned it is available on the Dakele Forum. Unfortunately the forum itself is in Chinese. Is there an official English forum?
I managed with help of the vendor to install a ROM from 2009 form needrom.com, and now most of the phone is English. I still have some chinese icons in the dialer.
Not disturbing, but If there is a way to make this all English, please let me know. If there is a recent complete Englis ROM , I'd appreciate info or a link.
One thing that IS irritating: if I just click on a number of my dial history when I want to call that number, the country code +86 is added as a prefix. Does anyone know how to remove this setting?
Thanks!