Just upgraded to WM 6 Official. But found that the bluetooth cann't receive and send files to other devices. is there any registry that I missed?
or cab for fixing the bluetooth?
Greatdane said:
Just upgraded to WM 6 Official. But found that the bluetooth cann't receive and send files to other devices. is there any registry that I missed?
or cab for fixing the bluetooth?
Click to expand...
Click to collapse
I am facing the same problem after upgrade to WM6 official. Previously in WM5, transferring file was flawless. Anybody have a workaround?
-Red-
On my T-Mobile Ameo, I had to return it as faulty as I couldn't activate the bluetooth radio after I upgraded to WM6... I've heard that there may be a batch of T-Mobile devices with problems with the Microdrives and bluetooth radio...
Luckily, I got mine replaced under warranty... thought they might kick up a stink about the OS...
I don't think its a hardware problem.
its a software problem i think....
Dear seniors.. need help here..
I have the same pb with my P3600. It is impossible to have any bluetooth services associated to it... HELP ??
Greatdane said:
I don't think its a hardware problem.
its a software problem i think....
Dear seniors.. need help here..
Click to expand...
Click to collapse
Which device do you have? Ameo, x7500, x7501, u1000?
Can you use BT headsets with it?
Have you tried to use a BT mouse?
I know it's probably a silly question, but have you gone into Start...Settings...Connections...Beam and ticked the box that says Receive all incoming beams?
I wasn't able to receive files until I ticked that box.
I am, using Dopod U 1000.
I can use bluetooth handsfree without any problem.
just file sharing make me headache. and my desktop computer also can easily send file to my U1000. but just won't receive from "himalaya" ( xdaII).
and won't sent any file out of it.
To all seniors, don't you have any prob. with WM6 in Dopod U1000?
WM6 And Bluetooth Problem
Hi all
I had the same problem sending and receiving files after upgrade. Now i resolved the problems with following steps
1. Pair those devices
To send a file
1. Set to accept without confirmation on receiving device.
2. then send the file from athena
Receive a file
1. In beam accept all incoming beams
2. In bluetooth settings>> Mode tick on Make this device visible to other devices ( if you use a BT headset this option untick itself, May be on mine)
3. Then send the file from other device it works
Make sure the send device paired with athena as "active device(OBEX)" not the "Audio enhancement"
I hope this may resolve the problem sending and receiving. May be something else contributed to this solution. If this not works then remove the today plugin which is associates with bluetooth and try send and receive.
Good luck
Thanks mate!
Indeed I faced this problem accidentally yesterday after flashing a new rom on my trinity!
The problem with me was that I had turned the beam off - which i thought was only for infrared!!!
To add my two cents let me say that there's also in the registry a place where the key says 'obexenabled' or something similar. check for that (there is found in two places) and set it to 1. If you search for 'obex' you cannot miss it.
cheers and thnx for the assistance.
sabes143 said:
Hi all
I had the same problem sending and receiving files after upgrade. Now i resolved the problems with following steps
1. Pair those devices
To send a file
1. Set to accept without confirmation on receiving device.
2. then send the file from athena
Receive a file
1. In beam accept all incoming beams
2. In bluetooth settings>> Mode tick on Make this device visible to other devices ( if you use a BT headset this option untick itself, May be on mine)
3. Then send the file from other device it works
Make sure the send device paired with athena as "active device(OBEX)" not the "Audio enhancement"
I hope this may resolve the problem sending and receiving. May be something else contributed to this solution. If this not works then remove the today plugin which is associates with bluetooth and try send and receive.
Good luck
Click to expand...
Click to collapse
inspectorgadjet said:
I know it's probably a silly question, but have you gone into Start...Settings...Connections...Beam and ticked the box that says Receive all incoming beams?
I wasn't able to receive files until I ticked that box.
Click to expand...
Click to collapse
thought this was for IR only !!!!
file transfer via BT is working now !!!
thanks
Just want to know if there is any Cab for
Mouse Mode in WM6
i saw a video - HERE
Related
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
1) I dont think that was ever a default thing? Did you install something and forget? have a cooked rom? There are A2DP solutions in this forum, "Use the Search luke."
2) No, its shagged. I installed the windowslive50.cab file I had on universal, it works now.
3) No idea, mine works fine. Hard reset? Check your sim?
I can get online with my WLM but it does sometimes take a resync of the whole account to do it.
Skype did say (unless changed recently) that they were still working on transferring calls to bt headsets. Which means, currently, that it does not work through anything other than headphones and the mic on the phone.
Comm Manager
Hello,
It is possible to change the green color from the Comm Manager ?
Thanks
French Keyboard
I have upgraded my french Advantage and all is OK apart for keyboard layout. On my old Universal (also french keyboard) I had changes the registry for hklm/software/oem/qwerty layout to 1040C (hex) and it had worked.
On the advantage this does not seem to change anything, any ideas?
Also has anyone got integrated VoIP working? I have used a CAB file from Universal to activate it and SIP Config Tool to do the set up but it does not allow me to select VoIP from today menu.
Anyone got this set up and working? Integrated VoIP is the reason I upgraded to WM6!
Messenger Etc....
Live Messenger stops working correctly after a soft reset. Initially it works fine. Contacts show as offline, although they are still able to contact me and vice-versa.
As far as I can ascertain push email still functions correctly.
I cannot confirm whether this is related to MS's side (rather than the program) as I haven't had chance to check if anyone else experiences the same problems.
Have tried installing the separate CAB file but I am subsequently told that I do not have the necessary permissions (or something like that).
This comes from tests on a T-Mobile branded Ameo (not the brand new one I'm selling, if anyone decides to cross-check!)
I haven't come across any other problems. Seems a bit less laggy than the original T-Mobile ROM, loads up web pages slightly faster too it seems.
No other issues as yet.
Ive had no probs at all since installing the messenger cab.
Still using it now.
Do we know what version of WLM is on this new ROM?
I've pulled \windows\wlmmessenger.exe to desktop and looked at the Version tab...10.6.28.2700 is what comes out.
Pyrofer - can you do the same on your cabbed version and let me know what the version number says? Not always an accurate guide but worth a shot. Also the digital signature is 3rd May 07.
Cheers
Ant
EDIT - never mind, just seen ur post in general Athena tab...10.6.0026.1400
I wonder what is different? If anything? I also wonder whether this is actually a final release of the ROM that's just been leaked early, as WLM is a pretty central component to web using Athena owners (myself very much included) and for it not to work after a soft reset...hmm.
Hi royalmail,
I've got exactly the same problem you mention about the phone.
I was unable to answer calls.
So I belive you've use the second file to upgrade to WM6 (HTC001 ... with ipl...).
You have to go back to WM5 WWE using the last ROM posted in the Athena upload folder in the XDA FTP. After flashing your Athena to WM5, Use the first ROM posted (the one with a readme file included).
And voila! No problem at all since I've done it this morning, everything works fine!
Hope this helps!
Hi Thibale,
I flashed with the t-mobile version. the phone dead only once so far, though i am not sure it's caused by WM6. Anyway, thx for sharing your info.
royalmail said:
1. A2DP icon missing
I want to re-direct skype audio to my bluetooth earphone. How can I do that?
2. I can not login MSN/windows alive though skype can login without any problem via WIFI. Seems MSN try to get online through different connection setting? how/where can I define the connection setting for MSN?
3. Phone module die without any sign. All incoming call is diverted to voice mail automatically until soft reset. As if the phone is switched off.
(I am not sure whether this is WM6 related)
this means you might miss important call without any sign!
Does anybody have same experience?
Click to expand...
Click to collapse
See if this helps
http://www.silentservices.de/btIO.html
Also, read through the forum regarding some of your other issues.
Try to disable your GPRS and see if your calls start coming through.
Pyrofer said:
Ive had no probs at all since installing the messenger cab.
Still using it now.
Click to expand...
Click to collapse
Thanks for all the input.
@Pyrofer, could u upload yr WLM5.cab here? thanks in advance.
Hi there,
Everytime when i use the PDAViet 40005a Cross or Fantastic Mobiz v2.0b4 roms my s200 can't receive files through bluetooth.
But i can send files through bluetooth without any problem.
Is there a solution for this problem?
yes there is sollution,start/settings/connections/beam/recieve incoming beams
beams??? is this a IR only setting or work it on blue tooth too??
zeroed said:
yes there is sollution,start/settings/connections/beam/recieve incoming beams
Click to expand...
Click to collapse
Receive Incoming beams is for Infra red ! I have the same problem with bluetooth.
not only for infrared,it is for bluetooth too,when it is switched on phone automatically recieves via bt,why don't you people first try,then write????
zeroed said:
yes there is sollution,start/settings/connections/beam/recieve incoming beams
Click to expand...
Click to collapse
lol smartass.. incoming is also activated...
the other bluetooth devices that want to transfer te files can see the s200 as available through bluetooth.
zeroed is correct thou that setting is needed for BT not just IR
NetrunnerAT said:
beams??? is this a IR only setting or work it on blue tooth too??
Click to expand...
Click to collapse
bluetooth too when you beam files via bt phone first recieves it,then asks you if you whant to save them or not,and all without need to pair first and then to send,try for yourself when beam is turned on,phone recieves everything from everywhere.
u need a HTC BT FTP!!
i once have the same problem with BT, especially on receiving a file via BT (sending a file is not a problem). Then i read threads in this forum (sorry i forgot so i can't give u the link) and i found a solution for my problem (and of course your problem too).
u need a program to install called "HTC_BT_FTP.cab". it's some kind like add-on on your BT settings, with this program installed like zeroed says, it's turn on the beam and BT icons, then we can receive a file via BT
zeroed said:
bluetooth too when you beam files via bt phone first recieves it,then asks you if you whant to save them or not,and all without need to pair first and then to send,try for yourself when beam is turned on,phone recieves everything from everywhere.
Click to expand...
Click to collapse
That has newer been the case for me.. Either if its ticket or not, i can get files from everywhere without beeing paired.
Try HTC BT FTP
it's working just try it
sorry, thread flush only~~
I recently installed DCD's new GPS enabled ROM for Verizon. Everything has been working well even the GPS !!EXCEPT!! Bluetooth OBEX. When I try to send / beam any type of file my XV6800 stops responding and I am forced to soft reset.
I don't know if this only affects the Verizon ROM or all carriers for that matter. Is there any one here that has a fix or know's of a fix to resolve this issue? Has DCD released any news on this? I would Gladly appreciate it, as all the people with this issue.
UPDATE
I have revised the registry and IR and OBEX are enabled.
[ I also read on another thread that a Verizon user has the same issue. Only he has came to a conclusion that this issue only arises when he installs any new app in the DCD beta ROM. I havent tried hard reseting. I am waiting for this fix because other than that my XV6800 is close to perfect after all my modz.]
EDIT: I am on DCD 2.2.0 with other ROMS mixed and it has been working for me for a while already ( previous software was buggy ). You should enable beam through the bluetooth settings and on the comm manager also.
I get a "failed" message when I try to send files from one titan to another via bluetooth. Does anyone know how to fix this?
liemydude said:
I get a "failed" message when I try to send files from one titan to another via bluetooth. Does anyone know how to fix this?
Click to expand...
Click to collapse
Make sure the other Titan has Beam enabled.
Both titans have beam enabled. It still says "pending" for like 2 secs then it says "failed"
liemydude said:
Both titans have beam enabled. It still says "pending" for like 2 secs then it says "failed"
Click to expand...
Click to collapse
Do any of them have the authentication enabled? Both of them are discoverable via bluetooth right?
If they do / dont try to pair them and then try it again. For some reason they act weird at times and you have to do this in order to send something.
Hello,
I setup my voip on the PK3.0 rom, its dialing and it almost works. Except that I can not hear anything, I can speak and the other party hears me just fine, but I can not hear them, anyone came across this? What can you recommend to fix this?
bump, still no resolution to this, it works fine one way. But I can't hear anything the other person is talking....
Anyone?
marek101 said:
Hello,
I can speak and the other party hears me just fine, but I can not hear them
Click to expand...
Click to collapse
This isn't going to help much but .... sounds like the perfect setup to me.
Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together
salasbg said:
Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together
Click to expand...
Click to collapse
I would be very much interested, how would you go about by debugin' this ?
salasbg said:
Hi Guys,
I am trying to run VoIP on my device (which is not athena by the way) and have absolutely the same issue. I have very good knowledge in the voip networks and very good experience and this thing makes me crazy (believe me)
As what i already found is there shouldn`t be any issue:
the RTP is going between the end points without any troubles on the correct ports and everything looks just perfect - i.e. there is no any network issue, SIP communication (SDP related) issue or whatever like that
The possible problems for me are as follow:
- codecs issue - actually if you can make a call and the other side pick it up without the line to be dropped, then this is not the case (at least the codec on windows mobile is working)
- the audio output device - the audio is trying to go out trough a device which is not present on your system - so you are not hearing anything.
I will be glad to chat to anyone who have the same issue and can help me to debug the problem and find the permanent solution. I don`t have big knowledge on windows mobile devices (but at least know how to install cab files and modify the registry settings - hehe) so to anyone who is in deep relationships to this system and can help me -- give me your msn/icq/skype/jabber contact and lets pray together
Click to expand...
Click to collapse
Hi!
I start by stating that I finally got it "working"! Yeahh! This "thing" costed me a hard reset and a lot of frustration. Let me write down what I think is the issue/"solution".
I say "working" because it is almost impossible to get the sound out of the Athena, unless you use a bluetooth headset (I haven't tried the wired one) and the supplied Voice Dialer.
To keep it short, for the Athena X7501 here is what you need to do to have "native" VoiP working partially as thought:
Connect the BT headset
Leave the Voice Dialer activated (Cyberon Dialer, provided in the original ROM). That means that the relevant entry in the registry shouldn't be set to '0': HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\LaunchAPEnable
Connect to your VoiP Servce and launch the phone. Now you should see your VoiP provider as agent. Dial the number (Good luck with the ipdialplan.xml) and you see that the Voice Dialer pops-up! Ignore it. The relevant communication port is happily already taken by the VoiP. You hear the sound on your bluetooth Headset. If you like, you can now transfer the sound to the speaker!
To my understanding, after having spent hours on this issue, I think that this is due to a DLL modified by HTC. Don't ask me which one. There is NO registry entry you can play with to solve it, unless you 're really lucky with the DLLs provided. It seems that there was some kind of agreement to make life very difficult to those trying to communicate through VoiP. I personally use VoiP only at home and don't bother too much. Maybe all this is history in the cooked ROM. Let's see.
If you don't need the Voice Dialer, then I suggest you use Fring. It works well both ways. However to use a Bluetooth Headset, you need to deactivate the Voice Dialer in the registry.
I hope this helps.
Rgds
Dod
P.S. The above are applicable to the original US Rom of X7501
There has been a discussion at Skype with respect to 6.1 and Skype failing to work correctly http://forum.skype.com/index.php?showtopic=112059
Maybe this might be of help.
Strange problem. Maybe you can try with software like fring.
Ran it on pk3 without any trouble and now running it with the 6.1 rom and still working fine
hello, I am new here, sorry for bad english, I never pass my english lesson in school.
My phone is Huawei U8510 (Ideos X3), it has a bluetooth problem.
the bluetooth is discoverable but I can't send / receive a data, even a very small size data (tried a to send / receive picture about 68kb).
I've tried to install bluetooth file manager & still doesn't work.
It can be paired but can't do anything at all, I've tried 4 different devices but it has the same result. Can't send / receive a data, can be discovered, can be paired (paired but not connected).
someone says it always say "paired but not connected" but it actually working, but for me it isn't.
can any one help me please?
Try sending it to the device manufacturer
The Android Manual said:
Try sending it to the device manufacturer
Click to expand...
Click to collapse
it's a good idea, I am frustrated with this phone..