Please help.
I need the latest ROM for XDA2, is it 1.72 ?
Can someone ple send it to me (or a link) ASAP.
thanks in advance.
Cheers
i dont think the o2 rom is out and the 1.72 roms from tmobile, qtek and imate are urled to all over this forum
so why should people mail it to you ?
i even think many peoples mail box would mess up sending soo larger attachments
Hi all,
since there are that many operatorid's compared to the language id..
i'm wondering if one of you guru's has successfully got the Qtek 2020 upgraded to WM2K3SE with the caller id Qtek and language id WWE
since i want to give it a try on my own 2020 i have been reading a lot of info on this board.
unfortunatly i'm loosing track on the various roms available..
it looks like that the 'sin' rom is currently for the 'english' the most stable.
however i'm missing a couple of things in his instruction which are being mentioned in the dcs- rom ..
therefor i'm a bit too scared to start updating my 2020,hoping there is someone who can has upgraded his 2020 with the roms and is willing to tell me which steps to take and which areas to be carefull about..
thanx in advance
yup without any problem. Surething I'm not a guru.
Regards,
Mark
Hi guys,
I'am a newbie here, especially with ROM upgrades... Recently, I have just upgraded my O2 XDAII from WM2003 t0 WM 5.0. After a few days of using WM 5.0, It's mass software incompatibility cools me off and I'm deciding to downgrade back to the ROM which I'm originally used.
So guys, is anyone of you has the original WM2003 ROM image from O2 for XDAII? If you have, please kindly provide me a link, so that I could download it.
Other than that, is anyone of you also have the original WM2003SE 2.20 CHS ROM image from O2 for XDAII, as well? If you have, please also kindly provide me the link, as well.
However, original WM2003 & WM2003SE ROMs from non O2 is also acceptable... But I think I would prefer the one originally for O2.
Thank you very much.
Caesar
look around the forums
for 2003SE translated from chinese
http://forum.xda-developers.com/viewtopic.php?t=18287
http://forum.xda-developers.com/viewtopic.php?t=15342
org roms look here
http://www.slipstreamsolutions.co.uk/support/rom_updates.htm#Siemens
Rudegar said:
look around the forums
for 2003SE translated from chinese
http://forum.xda-developers.com/viewtopic.php?t=18287
http://forum.xda-developers.com/viewtopic.php?t=15342
org roms look here
http://www.slipstreamsolutions.co.uk/support/rom_updates.htm#Siemens
Click to expand...
Click to collapse
Cheers mate! I'm saved! Phew!!
Thank you so very very much!
By the way, do you know how to flash the rom from http://forum.xda-developers.com/viewtopic.php?t=18287 by mamaic ? If you don't mind, could you teach me with the detail procedure, please? Thank you.
Caesar
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....
Hi,
I've upgraded my qtek 2020 from wm2003 to a wm6 rom ( several from the forum: efsane; shekhar; tofclock), and in all of them i got the same problem:
The phone doesn't make call's, the phone button doesn't work, the phisical one (the green one) and the software phone program.
When i reset it, it appears "no gsm", and the rom version (if this helps)
Probably it's a very simple thing, but i can't figure it out, some help please.
I would try another radiostack
Thanks Rudegar!!!
Thats it!!!
I've installed a differente radiostack, and now works great!!
Thanks
Guide to do same upgrade
Hi setekecas,
Is there any possibility of you providing me a guide of how I can upgrade my Qtek 2020i to WM6..
I've been searching and reading but never seen anythig that has been soo well succieded in making this upgrade..
Thank you for your help or anyones help..
Jonathan Cunha
Abraço
Hi
Im from spain, sorry because my english level is low. I can upgrade my Qtek to windows mobile 6.1, Windows mobile 5.0?
Thanks but if possible in spanish.