I could use some help. I am well and truly hung.
I've tried reading several threads.
The device was upgraded to the "Black Shadow Version 4" ROM
It now hangs at the Windows Splash Screen
CID unlock has not previously been done.
Soft, Hard Reset and Taking out the battery have been tried and failed.
Hermes SPL1.11
CID
cmd > info 2
HTCSROGER001ùìHTCE
I am assuming I should be able to
I extract the .nbh image file from the HTC WM6 official release (
HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe
-> "RUU Signed.nbh"
And that I should be able to install this with
RUUWrapper.exe
I am able to get into the bootloader Power-Okay-Reset
When I select the 1.11 Load Option it results in:
Error 294: INVALID VENDER ID
or "Force using SSPL" results in a
Error 260: Update Error
How do I bring this brick back?
Thanks,
Robert
No Bad Blocks...
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x18B00
Partition[3], type=0x4, start=0x1BC00, total=0x1EC00
CE Total Length(with sector info) = 0x385E000
CE CheckSum Length(without sector info) = 0x3780000
Cmd>
You may be making this far more harder for yourself than you need to. If you're able to get into the bootloader, then just flash your standard carrier ROM from there while attached via USB.
I just found my standard carrier ROM here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
Am downloading now.
That doesn't work it is a collection of 3 .raw files.
The advice "apply a standard rom" is harder than it might appear.
Where do I find a Rogers HTC Hermes ROM? erk!
I am now at trying to reconstruct an NBH using the following: (tell me I am being silly and there is an easier way!)
http://wiki.xda-developers.com/index.php?pagename=Trinity_HowtoReconstruct
Related
Hello,
My HTC blocked on the white screen where htc is written.
I do a soft or a hard reset it doen't go after the logo screen...
info 8 :
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x1E7(487) is BAD block !!!
Block 0x1EA(490) is BAD block !!!
Block 0x1F3(499) is BAD block !!!
Block 0x207(519) is BAD block !!!
Block 0x209(521) is BAD block !!!
Block 0x21C(540) is BAD block !!!
Block 0x22A(554) is BAD block !!!
Block 0x22C(556) is BAD block !!!
Block 0x381(897) is BAD block !!!
Block 0x387(903) is BAD block !!!
Block 0x389(905) is BAD block !!!
Block 0x390(912) is BAD block !!!
Block 0x391(913) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19800
Partition[3], type=0x4, start=0x1C800, total=0x1E000
CE Total Length(with sector info) = 0x39E4000
CE CheckSum Length(without sector info) = 0x3900000
What are those BAD block ???
USB>checkimage
IPL CRC checksum = 0xB11BA471
SPL CRC checksum = 0x3BF03635
CE CRC checksum = 0xC0E1751A
ExtROM CRC checksum = 0x4F9844B0
Radio Image CRC checksum = 0x724875C8
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
Somebody can help me ???
Have you tried flashing HERMIMG.nbh from SD Card?
Instructions here, let me know if you need more help:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Hi pof,
In bootloader I don't see this menu you mentionned on the link but only the three colors (red, green and blue)...
What am I doing wrong ?
Regards,
Giuseppe
Try formating the miniSD card in FAT32, if it doesn't work try in FAT16.
It works for the FAT32.
It say upgrade completed but when I reset it still stay blocked on the white htc screen...
Any other advices ?
Regards
Bootloader command "task 28" formats NAND flash (Storage). I don't know if the bad blocks you have are in NAND or not, but you may give it a try... output should be something like this:
Code:
USB> task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 462
Storage Total block: 474
Total Bad Block in CE: 0
NeedToEraseBlockStart: 475
Storage format success
Hi had the exact same problem about an hour ago. All I did was a hard reset and my phone came back to life, luckily every night my phone is synced with my pc so I had all my contacts and calender etc for messages.
i have same problem on my Dopod 838pro(HK ver),
my 838pro shows "No GSM" when booting..
i tried the solution from http://wiki.xda-developers.com/index...blems#problem5,
i download 838pro rom(HK ver) to SD card and boot it, just shows "Checking....." message, i wait for long times still no respons.......
all upgrade programes (e.g. ROMUpgradeUt.exe,MaUpgradeUt_noID.exe) can't connect with 838pro.....
when i open mtty.exe and i try to type below command
------------------------------------------------
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x3FB(1019) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x1EB00
Partition[3], type=0x4, start=0x21B00, total=0x18D00
CE Total Length(with sector info) = 0x446D800
CE CheckSum Length(without sector info) = 0x4360000
===============================================
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
============================================
but another command(task32, info 2,info 3....etc ) is no respone and hang......
any expert can help me?thanks
You can get your 838Pro to SIS(Dopod International Hong Kong Authorized Service Centre) to repair.
I have the same problem(No GSM).They said my 838Pro's mainboard damaged......need to change(but need to wait coz no board to change..... )
compuman said:
You can get your 838Pro to SIS(Dopod International Hong Kong Authorized Service Centre) to repair.
I have the same problem(No GSM).They said my 838Pro's mainboard damaged......need to change(but need to wait coz no board to change..... )
Click to expand...
Click to collapse
needs any charge? ...............
Could you run mtty and run the "checkimage" command.
Post the results here for us??
go to the wiki, recover using the KITL method.
Please do not open new threads for bricked devices, use this thread:
http://forum.xda-developers.com/showthread.php?t=286755
btw, you have bootloader 1.04, your problem is easy to fix. READ.
while updating to XDA live frm Schaps, my JASJAM stuck at 51%, now it's showing tri-colour screen
i did mitty here are the details
Cmd>info 2
HTCSSuperCID HTCE
Cmd>info 3
HTCSH
Cmd>info 4
HTCS Lœ3ÆHTCE
Cmd>info 6
HTCST ÚÈÒHTCE
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.60d
Device Name: HERM100, Bootloader Version : 1.40.Olipro
Built at: Mar 30 2007 15:10:47
Copyright (c) 1998-2007 Modified By Olipro - Hard-SPL
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x1E500
Partition[3], type=0x4, start=0x21600, total=0x19200
CE Total Length(with sector info) = 0x43CB000
CE CheckSum Length(without sector info) = 0x42C0000
pls help me to bring my JASJAM to life..
Yes Did It! Yey!
i finally able to bring back my JAMJAM to life by this procedure!
1. Disable Activesync: connections -- settings -- uncheck "Allow USB Connections"
2. Take out battery, sim, and sd card
3. Look at your phone for SPL version. Mine was 1.40
4. Run RUUWrapper.exe on a ROM that you know would work. I used Scahps. Choose -2.02 bootloader option on the phone bootloader option.
5. Wait, don't hook up USB cable to your phone yet. Check the box where you're agreed to upgrade then hit Next
6. Now hook your phone to activesync and let RUUWrapper picks it up.
7. That's all. I guess if it didn't recognize your device at step 6, then I would try again if i were you."
and my JASJAM was working again!
Hi All,
I got a weird problem on my 8525 recently.
Two days ago, in a sudden, my 8525's radio stops working, and the system turned very slow on every actions.
In fact, there are some mal-functions recently, like my email account disappeared itself, and phone signals is not goot, etc. But i did not pay attention to that, coz too busy. But I think that's some signal for some problem now.
After I got home, i tried to re-flash a new radio rom, but it failed, error 262.
Also, I can not flash hardspl v9, but v7 is successul.
I can flash any OS ROM, they are all working fine.
Now when starting, there is no radio at all.
Checking of nand flash returns some bad blocks, i tried to use task 2a and task 28 to repair. But no matter how i tried, there are still on bad block can not be removed. output as below
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x33F(831) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x21700
Partition[3], type=0x4, start=0x24800, total=0x16000
CE Total Length(with sector info) = 0x4A24000
CE CheckSum Length(without sector info) = 0x4900000
Cmd>task 2a
Check block : 831 - Bad
Task 28 always return a success.
So anyone here faced similiar problem with me？ Any suggestions? Thanks a lot in advance.
dustmud said:
Also, I can not flash hardspl v9, but v7 is successul.
Click to expand...
Click to collapse
use V7 then
yes, i can use v7 now.
but i am wondering the reason that i can not flash v9 is same as that i can not flash my radio..
my radio rom can not be flashed, no matter with which version.
hey,
ich got the same problem too. i don't know any answer...my hermes radio didn't work since 1 month...i tried so much but i can't flash the radio. but i have no bad blocks on info 8.
Hi,
i have a similar problem.
Tried to use task 2a but without success.
I tried to upgrade the radio but it doesn't work.
Os is updatable instead. I flashed schaps rom without problem.
Wiki only says to flash the radio rom..
Any help?
Try flashing one of the official roms as they tend to include the radio in them. See if that fixes it.
markafreeman said:
Try flashing one of the official roms as they tend to include the radio in them. See if that fixes it.
Click to expand...
Click to collapse
I don't remember if i already did it..
I'll try again and let you know.
Thanks by now.
acr80 said:
I don't remember if i already did it..
I'll try again and let you know.
Thanks by now.
Click to expand...
Click to collapse
Ok.. did it.
Nothing to do, it stucks on 12%.
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x1F1(497) is BAD block !!!
Block 0x277(631) is BAD block !!!
Block 0x370(880) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1A900
Partition[3], type=0x4, start=0x1DB00, total=0x1CD00
CE Total Length(with sector info) = 0x3C4D800
CE CheckSum Length(without sector info) = 0x3B60000
and..
Cmd>task 2a
Check block : 497 - Bad
Check block : 631 - Bad
Check block : 880 - Bad
Any suggestion?
Hi,
I have been working for days and nights through wiki (you guys do a great job) and reading forums on the issues of bricked hermes, and wanted to know am i wasting my time with mine as follows;
Dopod 838 pro (Hermes100)
IPL-1.01
SPL-1.09 (BEFORE 1.04)
Corrupted CID, IMEI, RADIO (NO gsm)
USB>task 32
CID: Wait interpreter timeout
Level = FF
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a S024
Device Name: H, Bootloader Version : 1.09
Built at: Nov 7 2006 22:59:17
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>info 4
HTCSDOPOD001Û<wHTCEUSB>
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xD(13) is BAD block !!!
USB>checkimage
IPL CRC checksum = 0x24C42773
SPL CRC checksum = 0x91BDD7D5
CE is None.
ExtROM is None.
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
spl-1.04 which allowed me to flash original roms but hung at 14%, i guess this is when the rom installs the radio part of the rom which mine was corrupt when trying in the first instance to update radio rom 1.54.30.10 which got me in this mess.
So its looking like service center i guess?
Were you flashing it at the time it stopped working? What is the history?
history i had a crc10.2 version rom, flashed supercid, flashed hardsplv7, then flashed original dopod shipped 3 rom 3.54.707.4 radio 1.47.30.10 worked great. Then flashed upgraded radio 1.54.30.10 and then bricked. Downgraded spl to 1.01mfg using mtty and then it corrupted my cid and imei. so now i left with a corrupted imei,cid and radio.
Did you use the "task 2a" command to fix bad blocks?
Might help....
task 2a command only works with mfg bootlooder eg spl-1.01 MFG, i cant go back to mfg 1.01 because your cid needs to be supercid. so my is answer no regrettably. iam thinking with spl-1.09 i could flash the factory rom via sd card? but where do you get factory roms from not upgrades considering my cid is locked.
There were a heap of roms on the wiki (dont know if they're still available) both cooked and stock roms. Who you with? Might be an idea to let people know as they might be able to supply links... Just a thought...Cheers
i am currently with 3, but i bought the phone used not sure who it was prior.
only a thought but are using a usb hub,if so stop and connect directly,dont know if my problems were exactly the same but 4 days of frantic flashing and stomach ulceration were instantly relieved by doing the above,good luck,btw the 3 rom from dopodasia is still available online and used with a mod wrapper would allow a card intall
i have tried hut..3 roms via flashing usb and by sd get error via sd not allowed. i guess the roms online are upgrades where i need the factory wm5 rom.
wm5 rom is a good idea and there are plenty stock wm5/6 roms floating around,but use the modded wrapper to install via usb,no hub,many people swear by at&t roms to get them out of trouble
thanks Stevie boy for your ideas and comments, still having problems i have tried all the dopod roms on xda developers using the custom RUU wrapper so i can select my spl which is spl-1.09 and i get invalid vendor id. if i had SPL-1.04 it has a bug where i leave the phone connected to USB and run the wrapper twice and it updates but this is not working now on spl1.09 bummer.
i feel your pain man,all i can say is that the wiki saved me,there is so much info there its a bit hard to see your way thru but you should be able to work it out.i assume you can still force bootloader is so it seems all is not lost try pm to mr vanx to get more specific advice
.....
I'm with the same problem...
can anyone give more advices...
_______________________________________________
Spv m3100
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a S024
Device Name: H, Bootloader Version : 1.09
Built at: Nov 7 2006 22:59:17
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>task 32
CID: Wait interpreter timeout
Level = FF
USB>checkimage
IPL CRC checksum = 0x24C42773
SPL CRC checksum = 0x7725B228
CE is None.
ExtROM is None.
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
USB>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0xD(13) is BAD block !!!
how to install???
hello guys,, since i am new with smartphones,, just bought a htc touch,, but don't knowq how to install the T9 pad,,
can anyone help me???
Is the HTC touch even a Hermes???
Me too, this posts seem no one able to fix it.
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x15E(350) is BAD block !!!
Block 0x184(388) is BAD block !!!
Block 0x1CF(463) is BAD block !!!
Block 0x1E8(488) is BAD block !!!
Block 0x2EA(746) is BAD block !!!
Block 0x2F3(755) is BAD block !!!
Block 0x311(785) is BAD block !!!
Block 0x364(868) is BAD block !!!
Block 0x3C6(966) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1700
Partition[2], type=0x25, start=0x3000, total=0x19E00
Partition[3], type=0x4, start=0x1CE00, total=0x1DA00
CE Total Length(with sector info) = 0x3AA7000
CE CheckSum Length(without sector info) = 0x39C0000
anyone can help ?
Try "task 2a"... Thats the command to fix bad blocks.
ultramag69 said:
Try "task 2a"... Thats the command to fix bad blocks.
Click to expand...
Click to collapse
Thanks for the reply, I tried tat too. nothing happend.
I tried almost everything, like cid unlocker, flash radio, flash back to original rom, flash from sdcard...etc..
Now trying to get the window platform builder.
You need to downgrade your SPL to 1.10 for those commands to work. If you haven't, nothing will work...
ultramag69 said:
You need to downgrade your SPL to 1.10 for those commands to work. If you haven't, nothing will work...
Click to expand...
Click to collapse
The problem is, I can't flash any of the rom. radio, hard spl, or others.