Can not flash HardSPL v9 and Radio - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi All,
I got a weird problem on my 8525 recently.
Two days ago, in a sudden, my 8525's radio stops working, and the system turned very slow on every actions.
In fact, there are some mal-functions recently, like my email account disappeared itself, and phone signals is not goot, etc. But i did not pay attention to that, coz too busy. But I think that's some signal for some problem now.
After I got home, i tried to re-flash a new radio rom, but it failed, error 262.
Also, I can not flash hardspl v9, but v7 is successul.
I can flash any OS ROM, they are all working fine.
Now when starting, there is no radio at all.
Checking of nand flash returns some bad blocks, i tried to use task 2a and task 28 to repair. But no matter how i tried, there are still on bad block can not be removed. output as below
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x33F(831) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1800
Partition[2], type=0x25, start=0x3100, total=0x21700
Partition[3], type=0x4, start=0x24800, total=0x16000
CE Total Length(with sector info) = 0x4A24000
CE CheckSum Length(without sector info) = 0x4900000
Cmd>task 2a
Check block : 831 - Bad
Task 28 always return a success.
So anyone here faced similiar problem with me？ Any suggestions? Thanks a lot in advance.

---

dustmud said:
Also, I can not flash hardspl v9, but v7 is successul.
Click to expand...
Click to collapse
use V7 then

---

yes, i can use v7 now.
but i am wondering the reason that i can not flash v9 is same as that i can not flash my radio..
my radio rom can not be flashed, no matter with which version.

---

hey,
ich got the same problem too. i don't know any answer...my hermes radio didn't work since 1 month...i tried so much but i can't flash the radio. but i have no bad blocks on info 8.

---

Hi,
i have a similar problem.
Tried to use task 2a but without success.
I tried to upgrade the radio but it doesn't work.
Os is updatable instead. I flashed schaps rom without problem.
Wiki only says to flash the radio rom..
Any help?

---

Try flashing one of the official roms as they tend to include the radio in them. See if that fixes it.

---

markafreeman said:
Try flashing one of the official roms as they tend to include the radio in them. See if that fixes it.
Click to expand...
Click to collapse
I don't remember if i already did it..
I'll try again and let you know.
Thanks by now.

---

acr80 said:
I don't remember if i already did it..
I'll try again and let you know.
Thanks by now.
Click to expand...
Click to collapse
Ok.. did it.
Nothing to do, it stucks on 12%.
Cmd>info 8
Block 0x0(0) is Reversed block
Block 0x1(1) is Reversed block
Block 0x2(2) is Reversed block
Block 0x3(3) is Reversed block
Block 0x4(4) is Reversed block
Block 0x5(5) is Reversed block
Block 0x6(6) is Reversed block
Block 0x7(7) is Reversed block
Block 0x8(8) is Reversed block
Block 0x9(9) is Reversed block
Block 0xA(10) is Reversed block
Block 0xB(11) is Reversed block
Block 0xC(12) is Reversed block
Block 0x1F1(497) is BAD block !!!
Block 0x277(631) is BAD block !!!
Block 0x370(880) is BAD block !!!
Partition[0], type=0x20, start=0x2, total=0x18FE
Partition[1], type=0x23, start=0x1900, total=0x1900
Partition[2], type=0x25, start=0x3200, total=0x1A900
Partition[3], type=0x4, start=0x1DB00, total=0x1CD00
CE Total Length(with sector info) = 0x3C4D800
CE CheckSum Length(without sector info) = 0x3B60000
and..
Cmd>task 2a
Check block : 497 - Bad
Check block : 631 - Bad
Check block : 880 - Bad
Any suggestion?