THANX BEFORE ANY THING
i have o2 xda mini s locked g4 iwas trying to upgrade it i used shell tool bug fixed
but it hang on imate
i enter bootloader it show usb i tried to use any official rom from imate or any other rom it reached 100% but still hanging
i left it for about 15 min.
when return i tried so many times to open it or enter boatloader but no thing happen it seem useless
i changed battery but no thing happen.....
now it open for just seconds then close
i want it to enter boatloader and i will repair it
IS THERE ANY HOPE OR I LOST IT FOREVER???????
1. You should use O2 stock ROM or Wizard Love ROM for OS restore, not i-mate
2. Your battery may be flat. Plug your wizard into wall charger, wait for it to fully charged, then enter RUU again.
1. You should use O2 stock ROM or Wizard Love ROM for OS restore, not i-mate
2. Your battery may be flat. Plug your wizard into wall charger, wait for it to fully charged, then enter RUU again.
Yesterday 08:28 PM
Click to expand...
Click to collapse
it is no problem to use o2 roms i just want it to enter bootloader and i will deal with it
i changed the battery but no change
thanx in advance
I had similar experience a while back.
WIZARD LOVE did it for me.
Good luck.
Try following this thread to get it back into bootloader mode. Once you have it there and it is connected to your PC again, flash your latest O2 Rom. Not an I-Mate Rom or anything else until you are able to bring it back to life again.
http://forum.xda-developers.com/showthread.php?t=294107
can any one give me the link to latest O2 Rom
i failed to get it from wiki
http://www.o2online.de/nw/support/downloads/software/xda/older/xdaminis/index.html
here you go
Related
My Atom stucks in Update Utility mode ! I flash almost roms available ! I can complete but still stuck ! Any idea ? Please help me !!!
1 Remove your sim and sd card.
2 Press "Power" + "Action" + "Soft Reset" to enter the BootLoader
3 Connect to the pc via usb cable
4 Run Atom Upgrade utility again.
don't work
i have the same problem..did you solve your problem? if you did, please tell me how to fix this problem...stuck in update utility screen...
You have only one choice. And that is to return your Atom for repair. Mine was actually replaced with a new one 8)
See here http://forum.xda-developers.com/viewtopic.php?t=50749
xda ii s boot loader mode
Hi iam lok,
Is there any updates on the Boot loader problem.
Regards
Lok
IamGuest said:
1 Remove your sim and sd card.
2 Press "Power" + "Action" + "Soft Reset" to enter the BootLoader
3 Connect to the pc via usb cable
4 Run Atom Upgrade utility again.
Click to expand...
Click to collapse
Guys, dont worry. You have to be patient.
I had the same problem and following O2 Support suggestion
I returned it to their service center .
Now forty (40) days later I a still waiting for something that had a max turnaround of five working days.
take battery out - start update utility and stop at screen before it starts to install.
put battery in and connect to pc and then click continue
worked for me a while ago... i was just listing steps from my memory so i couldve written something wrong there
The steps are not clear :roll: Do you take battery out and connect atom to pc before starting update utiliy?
you take the battery out so the atom shuts down completely
and then you turn it on/plug it in and immediately run the rom upgrade
if you want to solve this problem use anther pc to upgrade your O2 ATtom
because the problem in your PC not pocket ( A atom) .
i had the same problem before i solve it when i change pc
I tried on three different laptops and it still did the same...would not finish flashing radio rom and now stuck in utility update black screen...any other ways to repair this problem?
ok had this happen to me a few times, seriously cant tell u what worked but keep trying to do soft boot and boot loader, and battery removal and reboot the computer, then try update again...
Each time it happened to me i had to try and try and after a while (maybe its a time thing) it worked amazingly enuff.......i was told to take it back to store, but perserverance won out!!.....
i figured if i have to take it back i have nothing to lose so i tried all the solutions and eventually it responds........
Good luck..
I hope this helps.
I've been fighting with my Atom for a few days and found a fairly reliable solution for the failure to complete the upgrade. I take out my SD card remove the Battery and the SIM, replace the battery and the unit goes into Update Utility. I then connect it to my PC and the USB connected appears on the Atom screen.
I am then able to run the upgrade utility at which point my Atom was previously running. In my case the upgrade that was released in February Xda-Atom-ENG-20060123.exe, this runs through without issue and my Atom is installed cleanly again.
Running a subsequent upgrade, it hangs again in the Update Utility again, but I can restore to the previous version successfully and have done repeatedly.
NeilB said:
I hope this helps.
I've been fighting with my Atom for a few days and found a fairly reliable solution for the failure to complete the upgrade. I take out my SD card remove the Battery and the SIM, replace the battery and the unit goes into Update Utility. I then connect it to my PC and the USB connected appears on the Atom screen.
I am then able to run the upgrade utility at which point my Atom was previously running. In my case the upgrade that was released in February Xda-Atom-ENG-20060123.exe, this runs through without issue and my Atom is installed cleanly again.
Running a subsequent upgrade, it hangs again in the Update Utility again, but I can restore to the previous version successfully and have done repeatedly.
Click to expand...
Click to collapse
Hello neilB. Could u, or anybody, tell me where I could find ROM such as yours? I wanna try it to my Atom. Perhaps, God helps me, I could "cure" my Atom which is stuck at "Update Utility" and when I flash its ROM, never pass stage 5.
Thanx in advance. i really appreciate it.
helllo everyone...
i have a same problem..my atom is stuck on update utility screen..
dunno wat to do... i'm tryin to reflashed again..but it stooped at step five..'burn radio stack"..
i've been tested flashed it with another rom..
really appreciate any help..
kubo_yosiharu said:
helllo everyone...
i have a same problem..my atom is stuck on update utility screen..
dunno wat to do... i'm tryin to reflashed again..but it stooped at step five..'burn radio stack"..
i've been tested flashed it with another rom..
really appreciate any help..
Click to expand...
Click to collapse
Please go through this I had the same problem, but remeber to follow the instructions precisely as if u do not follow the same procedure u will not be able to correct the problem:
http://forum.xda-developers.com/showthread.php?t=358442
dear all friends
i have wiza200 k-jam it was work with love rom then i try to flash e it with shelltoll with RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship
and then phone hange in phone screen ibl and sple it can go to boot mode
but how can reflash it. it cant accepte update so please help me how can i revive it please tell me .
iam waiting help .
put the device in bootloader mode and flash the latest rom from your carrier quick!!!! before the battery drains out.
holding down the camera button then press the soft reset whole..
that should bring you to bootloader.. then flash!
Faria
Greetings,
Faria if in this case the battery drains totally the phone wont revive?
Thanks.
samy.3660 said:
Greetings,
Faria if in this case the battery drains totally the phone wont revive?
Thanks.
Click to expand...
Click to collapse
Yes if the battery drains and the phone has no OS it is not capable of recharging the battery as this is controlled by software not hardware, an external charger would be needed to charge the battery and then flash the phone.
i charge battry with power suplly nd phone goes into flash mode but whats tool can i flash it with the update not work i have usb cable without charger .iam waiting steps to riveve it please give me link for any tool and flash files and steps .
and very thanks for all replay
waleed2 said:
i charge battry with power suplly nd phone goes into flash mode but whats tool can i flash it with the update not work i have usb cable without charger .iam waiting steps to riveve it please give me link for any tool and flash files and steps .
and very thanks for all replay
Click to expand...
Click to collapse
the tool you need to current revive your device is the latest official rom from your provider.....t-mobile- orange ?
link for wizard love rom
here is a link for the wizard love rom you will be able to flash your device using it get most people out of trouble the once charged can use the shell tool again
http://rapidshare.com/users/EXGZ7T you will find it a the bottom of the page
i have the love rom but i cant flash it i see this errore
so what can i do iam waiting it was love rom isdie it it before hange with shelltool
thanks to all the wizard now back to live but i have same problem it has simlock ans isee in the screen you have tried 9times please retry
so how can i slove this probem
My Wizard
I tryed to change the rom of my wizard do WM6. Now i can see the Bootscreen with T-Mobile but then nothing more comes. So i tryed to role back an older Rom vor my MDA. But i get the same error-message like the guy before.
So what can i do?
worker2000 said:
I tryed to change the rom of my wizard do WM6. Now i can see the Bootscreen with T-Mobile but then nothing more comes. So i tryed to role back an older Rom vor my MDA. But i get the same error-message like the guy before.
So what can i do?
Click to expand...
Click to collapse
I got it. Its working again. But I want Windows Mobile 6. So if someone can give me a clou how to change the rom and where I can find a ROM for G4 that would be great.
THX
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
hello to all xda-dev's.my t-mob mda compact got stuck at bootscreen while doing a upgrade to wm6.i tried to install many rom's in it.but only & only wizard loverom worked to get a today sreen.but(no volume+0%battery even if battery is fully charged coz i tried the battery in a different wizard).plz tell me exaxt rom which should work with my following configuration.
ipl-2.06.0001
spl-2.06.0001
these r the errors i got with different roms i tried to flash
1)T-MOB COMPACT OFFICIAL(TM-PHONEDOWNLOADS.COM)-error120 COUNTRY ID ERROR.the rom image u r trying to use is not made for ur mobile.
2)FARIA'S ROM-after flashing through shelltool method it 1nce again stuck at bootscreen mode.
3)VLODECK'S ROM-ur battery is lower than 50%.even when it is 90% charged.
now plz guys i couldnt have explained it more.plz help me.I will be thankfull to the person who helps me.
Battery problem is related to Radio ROM, try to upgrade it.
but when i tried to upgrade radio rom it says low battery(coz its showing 0%)is there any other method to upgrade radio rom(ie may be in bootloader mode).plz guys tell me coz iam satisfied with wizard loves rom if it works flawlessly(ie no battery issue & volume error
Shut down the device completely, then you can charge your Wizard through AC adapter.
After the device is fully charged (Red LED changes to Green), Enter bootloader (Press Power, then hold Camera button) and run RUU to upgrade it.
now i had upgraded my radio rom to 2.66.but still both the prblm's are persisting.no loudspeaker sound & always 0 % battery.plz plz helpme
actuall i think i need to download the official t-mobile rom from t-mobile.com(us) but its not getting downloaded(coz it needs a valid t-mobile no. or something like that.can anybody help me in this.iam from india.
well it will be a paper weight.take it back to the store
I tried to upgrade ny Orange SPV M 600
IPL 2.10.0001
SPL 2.10.0001
with wm6_smart1_v1.3 using ROMUpdateUtility_Wizard_NoID.zip and now its not booting up it stuck up with the three color boot loader screen and i tried hard to hard reset but even after keep pressing the camera and communication button together and pressing the soft reset button with stylus for more than one minute it gave no response plz help its my friends phone and I am doomed if I cant make it up working.
If you disable the connect through USB option in ActiveSync, and then put the SPV in bootloader. Then flash it with a AKU2.2 ROM (Any will do including PV temp), then follow this: http://forum.xda-developers.com/showthread.php?t=310452.
How do i put SPV in boot loader????
AKU2.2 ROM where do i find this the link(rapidshare) which is given in thread u told is not working and plz tell me if I will have to download a new rom after that or this wm 6.0 by smart1 will work
Hold the Camera button, and insert the stylus into the larger of two holes on the edge of the SPV with the power connector.
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hardreset_bootloader
ya i tried this by reading the thread u mentioned but it puts me back on the same three color screen however I have been able to hard reset and after I press send it said formating FAT something like this
You must enter the bootloader (three colour screen), Then set ActiveSync to not connect through USB (ActiveSync->Settings->connection Settings), Plug the phone into your computer through USB, Then run any of the RUU's from any Part One of here: http://forum.xda-developers.com/showthread.php?t=308755.
Using the AKU2.2 ROM Update Utility, you should get a basic WM5 ROM. You MUST flash an AKU2.2 ROM before you flash a WM6 (AKU3.5) ROM.
Right now i am downloading this original roam from this link
ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/Original-Shipped-ROMs/OrangeUK/
will this do????
Can I directly install AKU 2.20 after downloading or will I have to do anything more like putting some file in boot loader which u just said???
I dont want WM 6 anymore plz just advice in steps what I should do to get my phone up and running..............
Put the phone in bootloader, change the active sync settings, and then run the upgrade program!
Good Luck!
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
absharaslam said:
ok i am trying let see what happens hoping for the best................
though I am scared!!!!!!!!!!
Click to expand...
Click to collapse
It will do no harm, and there is a high chance it will work.
The RUU is fairly self explanatory-Double click on it and do what it says. The battery charge level is not a problem, so long as there is some charge.
Thanks a lot dude it worked I am relieved now
Thanks again boss
Salute!!!!!!!!!!!!!!!!!!
Glad to hear it
If you now feel experienced enough to upgrade properly, read this thread very carefully http://forum.xda-developers.com/showthread.php?t=310452 (or at least the first post) and then this post: http://forum.xda-developers.com/showthread.php?t=308755
atleast for now i dont have courage.............
This phone belongs to my bro and currently he is out on vacation and when he will come back i thought it will be a surprise that his phone become so good anyways no risk anymore..........
may be next time on my phone only
Well atleast he shouldn't notice the change.
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
absharaslam said:
Finally I have been able to upgrade to WM 6.0 using PDAViet Rom 4.0.0.0.5 and its working like charm. I checked everything including IR Bluetooth WIFI all are working fine no problem at all.
Battery consumption rate is a bit high but not alarmingly high.
Thanks Boss without your advice it would not have been possible at all
Click to expand...
Click to collapse
No problem. Glad to make a difference