Hello gurus,
I have spent a few hours first looking around in the wiki for help. None found yet. Please diagnose and help me get my display working so it does not fade when I release finger pressure from the tmobile logo area. To operate the unit constant pressure need be applied to that spot for the display to bleed through. Otherwise it fades to white. Please advise. Thanks. G
I have the same problem, I have to keep it squeezed on the left hand side.. I read a thread about it before and everyone was saying that its a loose/crap connection for the screen..
It sounds like a loose connection in your upper slide. I would recommend finding locating the Wizard Service Manual and following it to dis-assemble your device and "tighten" up that loose connection.
KEEP IN MIND TAKING APART YOUR DEVICE WILL VOID YOUR WARRANTY
If you find that it is not a loose connection and that there may be a more serious issue, then I recommend sending your device back to HTC to have it repaired.
EDIT:: Found it:
http://forum.xda-developers.com/showthread.php?t=333715&highlight=wizard+service+manual
It's for sure a connector problem. This happened to me 3 months ago. I dropped the phone and it went white. so i dissembled the phone and the film connector that is used to connect the mainboard with the screen was loosen. i put the connector back in place and everything was ok.
Related
hi to all,
i have this O2 XDA2 when i powered on the phone it begun to hang up then i can't press or use the PDA...even i removed the the battery and put it back always hangs...so i tried hard resseting it but after that always ALIGN SCREEN now apprears on the screen...
hope that anyone here has a solution to this problem...thanks and merry christmas
this problem is same as the problem i posted is the WALLABY section...
o2 xda2 always start with screen align
please pleasE help me
my o2 xda¡¡ always start with align screen
Happened to mine too. The touchpad was busted, you can't get past the align screen as the touchpad isn't accepting any input.
same problem here,are there some one can help?
make sure you press the + sign perfectly in middle
omg try to understant the ques.
the same prob happens to me..... the align screen appears many times to me and it wil reinstall new OS. so then it looks new ans lost all old settings & mess, contacts.
how to stop this bug?
yeap i now have the same problem, dont know what happen to my touch screen.. i can press the upper section windows bar, signal and all kind that is on top
can anyone help please?
Like it was said before, your touchscreen is busted ... in my case, i've change my lcd and touchscreen with one bought on ebay. But before to change your lcd, you can try to align your screen with your finger, not with your stylus.
Just put an empty welcome.not file in your SD card.
It should bypass the alignment screen.
If it doesn't, then do one alignment run,hit the power button, and turn it back on. It should work then.
Beware, though, that the screen will be unaligned. Manage to get to the alignment again, and repeat the process (hitting power button thing). Then it'll be aligned correctly (at least in my case it does...)
As Huefu posted the touchpad is dead my friend. There is another topic about the touchscreen being dead that I have posted on. You can buy one on ebay but beware there are two different screen types. So dismantle first to check the connectors on the back of your screen to make sure you get the right replacement.
Your looking around £30 and some patience. It's tricky to take the phone apart and reassemble. You can google for the XDA/MDA service manual, this will show you how to take it apart
Good luck
2 Years Ago i´ve got the Same Problem....I opened my Himalaya
and there was a bigger Piece of Tobacco (I´m Rolling my Cicarettes by myself)between the Screen and the Housing- you couldn´t see it from Outside.
...for my case this was the solution !
and this Year my Himalaya is getting 5 Years old
I would try this first before Buying a new Screen
...but ...as honosuseri mentionened before
There different Models with different Connectors
(i think 2 or 3 different Connectors)
watch out ! DOOD!
Hi,
My HTC is giving me problems. The screen has become yellowish.
Earlier the screen used to become yellowish for 5-10 mins and it used to occur in two weeks or so. But now the phone has permanently become yellowish. I am also attaching a picture along with this thread. As you can see, the areas in the pic which are bluish is showing the true color of the background. Rest of the screen is all yellowish.
Can someone help me with this problem.
Best regards,
MOhit Goyal
Looks like a faulty contact from your Motherboard to your screen (bad connector, bad flex-strip or something like that)
IMO you need to send it in for repairs.
I have had the same with my p3300, but was able to fix it myself (connector was not completely pressed down, had come loose)
Hardware problem?
Do you think this is a hardware problem?
Why I doubt that is because:-
1. Whenever I touch any place on the screen for opening an application, the area shows the actual color, but if I just touch the screen the colours doesn't change.
2. Usually the phone starts displaying the correct colours after a restart
Should I take chances and reset my phone or something?
I'm having the exact same problem every now & then (often occurs when I keep the phone in my jeanspocket) A light tap on the screen often helps. Had it in for repairs earlier, but they only re-flashed it (!) So the problem is not solved
What to do now?
I am not able to play any game. I hate looking at my phone. It makes me so angry.
How do I get it fixed. Its the fourth consecutive day with the wrong colours.
Someone please help.
Performed a hard reset but still not working properly
This is not happening. I performed a hard reset thinking that it might just work but it did not.
Can someone please help me here.
Of course it is a hardware fault. Send it in for repair - or repair it yourself
I think is a virus or something else, because has happened to many people lately.
I also had the issue as pictured above.....and exactly as described in the first post.
It began to occur about three weeks....and gradually was getting worse.
Its getting worse
Again I am doubtful that its a hardware problem.
Now, I am not even able to open anything on my phone. I keep getting thrown back to the main screen. No matter what I open, what application I am using, it just keeps throwing me back to the main menu.
In addition to that, even when I am not using the phone, it just keeps flashing. I lock it and the screen turns on again. Its like the phone is getting used every second.
I think its a virus. Does anyone know any anti virus solutions for HTC HD2?
Thanks,
Mohit Goyal
i got exactly the same problem - check my photos here http://forum.xda-developers.com/showthread.php?t=716002&page=2
i donth think it is a virus - why? - becase if it so the virus should go when you reflash the rom or flash a new rom - i douubt also about the virus but when install new rom the color issue still existig.
i sent my device to the dealer for repair and i will apdate you about the real reason when i got the answer from the dealer.
however, the same issue happened before to one of my friends and the device was out of warantee - he took it to a repair shop and they told him it is a kind of default in the mother board.
this time we will get dealer answer so lets wait.
thanks
a member in other forum advised me to use the attached cab which solve a similar issue in Blackstone.
but it is too late for me because i returned the device to the dealer
however- other member faced a similar issue and the dealer told him it a default in the motherboard.
Send in for repair......
accessmohit said:
Again I am doubtful that its a hardware problem.
Now, I am not even able to open anything on my phone. I keep getting thrown back to the main screen. No matter what I open, what application I am using, it just keeps throwing me back to the main menu.
In addition to that, even when I am not using the phone, it just keeps flashing. I lock it and the screen turns on again. Its like the phone is getting used every second.
I think its a virus. Does anyone know any anti virus solutions for HTC HD2?
Thanks,
Mohit Goyal
Click to expand...
Click to collapse
Listen to the others... You need to send phone in for repair... My phone use to flicker on and off to the point where I couldn't call or use.... I sent to be repaired and they replaced the mother board, but didn't fix my other problems (phone will not turn off and when u put in battery phone turns on on it's own)..... I would send in for repair.......................
htc contacted me an inform me that the reason was the motherboard
yea its the motherboard isue i droped mind and d screen has changd its colour to yelow blue and sometimes wnt wake up aftr remvng 4m poket.gave it htc repair center they said a socket or conector has a problm whch cnt be repaired and so mothrboard needs to b changed.motherboard cost 8000rupees/190dolars whch is **** expensive for repairing
I had this same problem and read on some other forum that you're supposed to "flex" the phone. So I bended my phone a little (the top and bottom backwards, be careful the screen also has glass in it) to try to get a bit of a curve in it and by god ...it worked!!!!! The screen flickered and then the yellow screen was gone!!! I'm so glad because I mailed Htc two days earlier and I still don't have a response from them. I hope it works for you
Just to confirm... The same thing happen to me its either (A) the cable from MOBO to Screen came loose usually by flexing or bending the phone which can happen in someones pocket. (B) the cable connector came loose by same methods (C) MOBO went bad usually by same methods. Either way one should it in for repairs or crack it open and see for your self.
I got same problem before, it happened when the screen is moist. it looks like there is an absorbent layer behind the screen which got damped. try drying it.....found article to contained the unit in a seal container with rice overnite for drying electronic gadgets, and see the result.remember to take off the battery. good luck.
so, i just got this phone about a week ago, and its already seen several near death experiences with all the flashing ive been doing. but this one takes the cake. all i did was put the phone in my back pocket, with the screen facing in, sat down for half a second, and when i took it out, the screen had been pressed so hard that the top layer of the resistive screen was stuck to the bottm, and not registering anything. i knew the first step to fixing it was getting it unstuck. but it still wounldnt work. did a hard reset. and now im stuck at my initial tap screen to set up phone screen, and i cant do anything. this is clearly a hardware problem. can anyone help me out?
lemme be the first to say it man, ouch lol
sorry about your screen, i fear the only way to fix would be to find another screen assembly, if you search the threads for the cdma raphael(herman) i beleive there is a detailed teardown of the phone that may or may not help you resolve your problem. here is a quick link to something along the lines of what your looking for but not really too detailed : http://www.ifixit.com/Teardown/HTC-Touch-Pro/787/1
ive done that, but usually break the screen completely. i have an extra us cellular tp that has a bad keyboard and front panel buttons but screen and touch works. i just use it as a extra battery charger. has some scratches, but works. ill send it to you if you send me your old one. the screen has a double-stick tape that holds it to the frame around the edges. let me know if your able to tear it down and think you can put it back together again. its a pretty straight forward process though.
Apply packing tape to the screen and pull as hard as you can.
A week ago, I dropped my Note 2 on the sidewalk and smashed the screen (the phone itself functioned, but the screen was blank)
I took it to a local, reputable repair shop for fixing, and received the phone today, with a working screen.
I realized upon arriving home that both the Wifi and Bluetooth functions will not turn on.
They both do the following:
They will be grayed out, then allow you to turn on after about six seconds
When I press to turn on, it sits in the "on" position for five seconds, then slides back to the "off" position
After perusing the forums, I have done the following to try and determine the problem.
1) Took the battery out to restart the phone
2) Factory reset and flashed back to stock (had been on Jelly Beans)
3) I opened up the casing to see if any hardware had been dislodged that I could see (not an expert eye, mind you...I consider myself more of a tinkerer (I have been kicking myself for shelling out the dough for the repairs when the screen replacement looks so fun...)
Attached is a pic of what I think I should be looking at, after watching a few disassembly videos: (red rectangles).
--Note that the other side of the casing (which has what looks like tape over what is the wifi antenna(?) is not damaged as far as I can tell.
Possible explanations? Was the antenna damaged when the phone fell (face down)? Was damage done during screen replacement?
Thanks for reading! And apologies that my first post, after lurking for a while now, is a "take" post rather than a "give" one!
update? did you fix it?
I have the same problem (not working Wi-Fi - Bluetooth)
One morning I woke up and the bottom half of my Samsung galaxy avant (SM-G386T) had a grid of white lines going across it. First time I restarted my phone it went away.
But they keep coming back and now it's more permanent, Sometimes it goes away briefly but they come back. I tried factory resetting. That worked the first time for a few hours but then it came back. and I tried it again and 2nd time there white lines where there during the factory reset.
The lines even show when I turn the phone off and charge the phone. So I believe this means it is w hardware issue
I tried taking the back planel of the phone off. I disconnected and reconnected the lcd connector latch on the left side. But the problem still persists. I haven't pulled up the screen with a suction cup. So Idk if there is a cable that could be loose on the front end or not. But Idk want to go buy suctions cup if I dont need to you.
Should note that I do have a good sturdy rubber case on my phone. but it has hit the floor a few good times.
One other thing that seems to aggravate or sometimes even make the lines go away is putting my phone to sleep and waking it up repeatedly or adjusting my brightness to max.
What do you guys think? is this fixable or do I need to replace the lcd screen.
man its simple
just press the wires of display which are providing it power & ur problem will be gone.
Its due to lack of sufficient current to display!!
Rustamveer said:
man its simple
just press the wires of display which are providing it power & ur problem will be gone.
Its due to lack of sufficient current to display!!
Click to expand...
Click to collapse
What wires are you speaking of exactly. cause like I said I have taken the back off and disconnected and reconnected the LCD flex cable but nothing changed. Are there wires behind the LCD I need to get to? which means I need to removed the screen with a suction cup?