I have a Palm Tungsten W"Tungsten_W" I need to unlock it, will some1 tell me where to find something related to that or how to do it?
I found this article but is there a way easier than this ?
'Unlocking Tungsten W is possible!'
Dear Friends,
I have bought my first palm almost 4 months ago... I never used it in Mobile Mode, because it was locked to AT&T... I'm from Italy, and in Italy AT&T does not exist! So... I was very sad, I have paid 517€ (600$) for nothing useful for me (I have bought it for internet surfing and chatting).
By the way, about a week ago, I have found a TIP in SIMEMU site, when it tells about sim cloning to overcome sim locking.
If you use a Smartcard to clone your SIM (Tim is, old Vodafone is, Wind is NOT clonable) you could unlock mobile features of Tungsten W, creating an account on the Smartcard that have the exact IMSI of the SIM card you have had, boundled with your palm!
This is the path:
1) Buy a SmartCard and a SmartCard Ripper/Writer (about 30$)
2) Download latest version of SIMEMU at http://simemu.cjb.net/
3) Download programs to clone your SIM at http://www.mfgware.com
4) Create your Multisim card as described in the SIMEMU site and docs
5) Extract IMSI and KI of your clonable SIM (you will not be able to find KI of NON clonable SIMs!)
6) Extract IMSI of AT&T card boundled with your Palm
7) Insert the account of your clonable SIM in the position 0 of SIMEMU
8) Insert the account of your AT&T SIM in te position 1 of SIMEMU (use IMSI extracted, fake KI, and choose a PIN you have to remember)
9) Insert the now ready MultiSIM Smartcard in your Tungsten W
10) Turn on the mobile of palm inserting the PIN of account 1
11) Registration to the network is not possible, just wait the error
12) Go to SimTools of your Palm, use it to change the active number to account 0(see SIMEMU docs)
13) Go to Mobile function, then Options, then Network, choose the network of your cloned SIM
14) Registration now... is SUCCESSFUL!!!
Now you are able to use all the mobile features of your Tungsten W, with any carrier that have a clonable SIM!
Beware: Do not turn on TWO mobiles with the same Number, the network will found You as a SIM Cloner, and will call you to give some reasons... So, be Clever!
Good Unlocking!
Hi,
I have a HTC p 3400 which was bought in India, Once I moved to Uk, started using it with a Vodafone UK SIM and had no issues. In between I have flashed the mobile with WM6 and was able to succesfully continue using the same on Vodafone UK.
Now I have a T- mobile SIM and am unable to get the network at all, the mobile keeps on searching for the network and wouldnt allow me to search for networks manually
Gives me the following error
"Cannot read settings from the network, try viewing settings later or disconnect data connection and try again"
Pls advise
This may help you out
Hi,
You may go through followings, even i did
1. if you have your backup of wm5 with sprite-backup then get it on your sd card.
2. Now open the backup file
3. there is an option to restore asking you to check on the folders which you want to restore.
4. ONLY CHECK ON FOLLOWINGS (YOU CAN FIND IT UNDER WINDOWS)
A. REGISTORY
B. FILES CANTAINING SPRITE IN THE FILE NAME
5. Now restore the files
6. restart your gene
7. you can find network wizard under Settings>>Connection.
8. configure your gene with the same and enjoy full network
Hello!
I've updated to the latest version of MIUI a couple of days ago and I have just realized that I cannot use portable hotspot anymore.
I can switch on the option, other devices can connect to the newly created network, but none of these devices have any type of Internet Connection, while the phone has a 4G connection.
Has anybody else had this problem?
Any solutions?
Thanks!
I think I may have found a solution here (https://en.miui.com/forum.php?mod=viewthread&tid=603550&highlight=Redmi%2BNote%2B4%2Bhotspot), post 9:
1) Settings-->SIM cards & mobile networks-->your provider (Vodafone for me)-->Access point names-->GPRS web(internet)
2) scroll down, to "Bearer", tick all net types available in your country
3) change MVNO type to GID
4) change MVNO value to ffffffffff (should be pre-set after step 3)
This is a guide to help everyone who bought the N9700 (HK) version and is not living in Hong Kong, in this way you can activate all the bands you want and remove the band aggregations natively create for HK.
BEWARE I TESTED THIS ONLY ON THE N9700 (HK) (DON'T TEST IT ON ANY OTHER VERSION) and it worked for me also without root or without unlocked bootloader. (Even if I strongly prefer to be ROOTED and with unlocked bootloader when doing this kind of mods)
I'm not responsabile for any damage you will do to your smartphone using this procedure. if you do it you are taking all the risks.
NOTE: This change is not persistent and must be done after every OTA update that touch the modem
REQUIRMENTS
1) QSPT version 2.7.474 or above
2) QXDM 3.14.594 or above . (BEWARE NOT USE A LOWER VERSION)
3) Qualcomm QD Loader driver
4) Samsung driver
PROCEDURE
-1) Do a full backup of your data
0) Activate the USB Debugging (there are plenty of guides on XDA I will don't explain it here again)
1) change the USB mode using one of this 2 codes *#0808# and select RNDIS + ACM + DM and reboot
2) attach the smartphone to USB the system should find new devices without driver (use the qualcomm one or lets windows finds the drivers alone)
4) find out which COM number has been attributed to your device and note it (e.g. COM8)
3) open QPST configuration if you find already a port configured go to the point 5 (sometime you will find everything already configured by his own)
4) Otherwise click on ADD NEW PORT there will be 2 field : Port (put the port you found at the point 4) (e.g.COM8) , Port Label : write whatever you want (e.g. MyPort)
5) In the menu of QPST configuration select "Service Programming" and click OK to every confirmation windows that will appear
6) Leave QPST open and open QXDM Professional
7) In the menu of QXDM Professional click "Options" --> "Communication"
8) Select the port you configured in QPST and under Communication - Target Port enable it and click OK
if everything is going as expected you will see that QXDM enable all the options that at the beginning are grayed out
9) At this point select "NV Browser" in the View DropDown
10) check MULTISIM checkbox (it is important)
11) In the "Category filter" select "LTE"
12) Find the item 06828 (LTE BC Config) - click on it and click the read button
13) you should see the a decimal number that is the current bands enabled
14) Install on you device LTE Band Calculator app on your smartphone and insert that number in it to see what bands are enabled, add the bands you what to add and note down the new number in notepad . (e.g. 17592186044415 this enable all the bands from 1 to 44)
15) go back to QXDM and past the new number in the field where you have found the original one click WRITE (wait 10 sec) - click WRITE again and wait 15 sec)
OPTIONAL PART - AGGREGATION
1) Close QXDM
2) close "Service Programming" in QSPT (don't close QSPT) - don't save when it requests it
3) under the menu Service in QSPT open EFS Explorer and confirm with OK (without touching nothing)
4) wait until you will not see the filesystem tree appear
5) Navigate to the "folder" nv --> Item_files -->modem--> lte
6) there will be few folder under LTE find a file named "ca_band_combos" or similar
7) make a copy on your PC of the file "ca_band_combos"
8) delete "ca_band_combos" file in find there (this enable any aggregations possible)
HOW TO TEST IT:
[IF YOU ARE ROOTED]
You can use Network Signal Guru
[IF YOU ARE NOT ROOTED]
you should see 4g+ icon (in Italy for example)
or test with a speed tester before and after to see if the aggregation works as expected (in my case before this procedure my test was 15 Mbits download / 12 Mbits upload, after the procedure 80 Mbits download / 30 Mbits upload )
HOW TO REVERT IT
[IF YOU ARE ROOTED]
adb shell 'dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1'
adb shell 'dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst2'
adb reboot
[IF YOU ARE NOT ROOTED]
The best way is to flash with ODIN the full stock firmware and do a full wipe
Sorry if I didn't add any attached file to download or image (no more time left ) .. (you can find it on XDA or google it)
_P3dr0_
Nice!!
Thank you for the guide! This is needed!
Sent from my God Mode 8
p3dr01978 said:
This is a guide to help everyone who bought the N9700 (HK) version and is not living in Hong Kong, in this way you can activate all the bands you want and remove the band aggregations natively create for HK.
BEWARE I TESTED THIS ONLY ON THE N9700 (HK) (DON'T TEST IT ON ANY OTHER VERSION) and it worked for me also without root or without unlocked bootloader. (Even if I strongly prefer to be ROOTED and with unlocked bootloader when doing this kind of mods)
I'm not responsabile for any damage you will do to your smartphone using this procedure. if you do it you are taking all the risks.
NOTE: This change is not persistent and must be done after every OTA update that touch the modem
REQUIRMENTS
1) QSPT version 2.7.474 or above
2) QXDM 3.14.594 or above . (BEWARE NOT USE A LOWER VERSION)
3) Qualcomm QD Loader driver
4) Samsung driver
PROCEDURE
-1) Do a full backup of your data
0) Activate the USB Debugging (there are plenty of guides on XDA I will don't explain it here again)
1) change the USB mode using one of this 2 codes *#0808# and select RNDIS + ACM + DM and reboot
2) attach the smartphone to USB the system should find new devices without driver (use the qualcomm one or lets windows finds the drivers alone)
4) find out which COM number has been attributed to your device and note it (e.g. COM8)
3) open QPST configuration if you find already a port configured go to the point 5 (sometime you will find everything already configured by his own)
4) Otherwise click on ADD NEW PORT there will be 2 field : Port (put the port you found at the point 4) (e.g.COM8) , Port Label : write whatever you want (e.g. MyPort)
5) In the menu of QPST configuration select "Service Programming" and click OK to every confirmation windows that will appear
6) Leave QPST open and open QXDM Professional
7) In the menu of QXDM Professional click "Options" --> "Communication"
8) Select the port you configured in QPST and under Communication - Target Port enable it and click OK
if everything is going as expected you will see that QXDM enable all the options that at the beginning are grayed out
9) At this point select "NV Browser" in the View DropDown
10) check MULTISIM checkbox (it is important)
11) In the "Category filter" select "LTE"
12) Find the item 06828 (LTE BC Config) - click on it and click the read button
13) you should see the a decimal number that is the current bands enabled
14) Install on you device LTE Band Calculator app on your smartphone and insert that number in it to see what bands are enabled, add the bands you what to add and note down the new number in notepad . (e.g. 17592186044415 this enable all the bands)
15) go back to QXDM and past the new number in the field where you have found the original one click WRITE (wait 10 sec) - click WRITE again and wait 15 sec)
OPTIONAL PART - AGGREGATION
1) Close QXDM
2) close "Service Programming" in QSPT (don't close QSPT) - don't save when it requests it
3) under the menu Service in QSPT open EFS Explorer and confirm with OK (without touching nothing)
4) wait until you will not see the filesystem tree appear
5) Navigate to the "folder" nv --> Item_files -->modem--> lte
6) there will be few folder under LTE find a file named "ca_band_combos" or similar
7) make a copy on your PC of the file "ca_band_combos"
8) delete "ca_band_combos" file in find there (this enable any aggregations possible)
HOW TO TEST IT:
[IF YOU ARE ROOTED]
You can use Network Signal Guru
[IF YOU ARE NOT ROOTED]
you should see 4g+ icon (in Italy for example)
or test with a speed tester before and after to see if the aggregation works as expected (in my case before this procedure my test was 15 Mbits download / 12 Mbits upload, after the procedure 80 Mbits download / 30 Mbits upload )
HOW TO REVERT IT
[IF YOU ARE ROOTED]
adb shell 'dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst1'
adb shell 'dd if=/dev/zero of=/dev/block/bootdevice/by-name/modemst2'
adb reboot
[IF YOU ARE NOT ROOTED]
The best way is to flash with ODIN the full stock firmware and do a full wipe
Sorry if I didn't add any attached file to download or image (no more time left ) .. (you can find it on XDA or google it)
_P3dr0_
Click to expand...
Click to collapse
Awesome post. But one question, I bought Note 10+ from ebay (N9750/DS) with SD chip and calling is not working with Freedom mobile but I can text and browse internet. Any chances I can make the changes to get this working with Freedom mobile? Help would be greatky appreciated as I don't want to go thru the hastle of returning it.
If I'm not wrong n9750 is HK version In that case it should work.
thaper0007 said:
Awesome post. But one question, I bought Note 10+ from ebay (N9750/DS) with SD chip and calling is not working with Freedom mobile but I can text and browse internet. Any chances I can make the changes to get this working with Freedom mobile? Help would be greatky appreciated as I don't want to go thru the hastle of returning it.
Click to expand...
Click to collapse
You have that ebay link handy? Looking for places to purchase the same model. Is the "sdcard" an option that needs to be specified?
Thanks!
Sent from my God Mode 8
Here is the kink Ebay
What do you mean bh SD card option?
thaper0007 said:
Here is the kink Ebay
What do you mean bh SD card option?
Click to expand...
Click to collapse
You mentioned SD Chip in your post....
Sent from my God Mode 8
---------- Post added at 09:59 AM ---------- Previous post was at 09:58 AM ----------
[/COLOR]
louforgiveno said:
You mentioned SD Chip in your post....
Sent from my God Mode 8
Click to expand...
Click to collapse
That's Snapdragon ?
thaper0007 said:
---------- Post added at 09:59 AM ---------- Previous post was at 09:58 AM ----------
[/COLOR]
That's Snapdragon ?
Click to expand...
Click to collapse
Ah, makes sense....so one question is the secondary slot a sim/sdcard slot or is an extra sim tray needed to be purchased that will hold an sd?
Never had a dual sim smartphone, so some of the details are beyond me.
Sent from my God Mode 8
louforgiveno said:
Ah, makes sense....so one question is the secondary slot a sim/sdcard slot or is an extra sim tray needed to be purchased that will hold an sd?
Never had a dual sim smartphone, so some of the details are beyond me.
Sent from my God Mode 8
Click to expand...
Click to collapse
No. You don't need to purchase anything extra. How sim tray works for dual sim phone is that either you can use sim card 2 slot or SD card. If you use SD card, then you can't use second sim. But I don't think SD card is needed as it's memory is already 256 GB. And trust me, dual sim phones are just awesome.
thaper0007 said:
No. You don't need to purchase anything extra. How sim tray works for dual sim phone is that either you can use sim card 2 slot or SD card. If you use SD card, then you can't use second sim. But I don't think SD card is needed as it's memory is already 256 GB. And trust me, dual sim phones are just awesome.
Click to expand...
Click to collapse
Thank you! Just placed my order.
Now i gotta bunch of reading and re-learning to do....i know much has changed since the note 8 and nougat, looking forward to making mods etc.
Thanks again for the answers
...i may have more sooner than later ha!
Sent from my God Mode 8
louforgiveno said:
Thank you! Just placed my order.
Now i gotta bunch of reading and re-learning to do....i know much has changed since the note 8 and nougat, looking forward to making mods etc.
Thanks again for the answers
...i may have more sooner than later ha!
Sent from my God Mode 8
Click to expand...
Click to collapse
No worries. Enjoy your new phone. Did you order the same that I mentioned from Veitnam? And are you from Canada? If yes, then you have to pay $74 custom charges. Still it's way cheaper then what you pay in Canada. ?
thaper0007 said:
No worries. Enjoy your new phone. Did you order the same that I mentioned from Veitnam? And are you from Canada? If yes, then you have to pay $74 custom charges. Still it's way cheaper then what you pay in Canada. ?
Click to expand...
Click to collapse
Thanks. No i ordered from another link that ships from new jersey (im in the u.s). No custom charges
Many thanks for the link and advice!
thaper0007 said:
No worries. Enjoy your new phone. Did you order the same that I mentioned from Veitnam? And are you from Canada? If yes, then you have to pay $74 custom charges. Still it's way cheaper then what you pay in Canada. ?
Click to expand...
Click to collapse
Sent from my God Mode 8
can anyone share what bands are enabled after this mod? I am using N9700 in US, and works great so far with all Carriers including Verizon, and VoLTE out of box. from what I gather, N9700 lacks several bands for T-mobile, i.e. 66 and 71. it would be a great that this mod enables them
this mod should enable all the bands that the chipset is able to support. However you have to calculate the right value to put in the NV RAM #6828 LTE Configuration since the number I wrote (17592186044415) doesn't include the band 66 and 71
Please look on google or XDA how to calculate the #6828 value for the bands you want to activate
hhspiny said:
can anyone share what bands are enabled after this mod? I am using N9700 in US, and works great so far with all Carriers including Verizon, and VoLTE out of box. from what I gather, N9700 lacks several bands for T-mobile, i.e. 66 and 71. it would be a great that this mod enables them
Click to expand...
Click to collapse
p3dr01978 said:
this mod should enable all the bands that the chipset is able to support. However you have to calculate the right value to put in the NV RAM #6828 LTE Configuration since the number I wrote (17592186044415) doesn't include the band 66 and 71
Please look on google or XDA how to calculate the #6828 value for the bands you want to activate
Click to expand...
Click to collapse
I'm having trouble finding the info for those 2 specific bands as well.
Would i be able to read the value from my T-mobile branded Note 8 and use that value to plug into the Note 10?
Sent from my God Mode 8
Hi,
In theory Yes you can. But I don't know if you can read this value from your note 8 SD T-Mobile. You can try since reading a value is not invasive and if it doesn't work in the note 10 you can write again the original value. Otherwise you can ask to the LTE Bands Calculator developers to add these bands and wait...
my 2 cents
I need qxdm activation code, please help.
I cannot help you on this .... sorry. Google is your friend!
Great Job. Thanks. I've managed to enable missing Bands for Vodafone UK in my N9750.
Good news for anyone having the Wing fall Back to 3G when making a call. You can activate VoLTE using a mix of the two following guides:
Guide:-How To Activate VoLTE,ViLTE,VoWIFI&ViWIFI LG Devices-LG Velvet 5G
Hi Guys Am Baljeet From India There Is A Path To Force Enable VoLTE On The"LG Velvet 5G LM-G900" Specifically Your Version Which Is The "LM-G900". By Default This Feature Is Disabled On This Model. Follow These Steps Given Below: A). Go To The...
forum.xda-developers.com
and
Lg g8x,g8,v60 Volte enable for all carriers, unlisted countries also
I will try to keep this post as small as possible. This will enable Volte for Phone ranging from Lg g8x, g8 and V60 without root or modifying the system files. Many have posted ways to get it, Iam only trying to help out the small bits missing...
forum.xda-developers.com
To make it as short as possible:
1) Create an empty directory named "enable_ue" in the root of the phone's main storage, using you prefered file explorer (like for exemple Cx Explorer or ).
2) From the LG Phone dialpad and with your SIM card inserted, type #*462633*#100# (for european LG Wing - LM-F100EMW) to get into the Hidden Menu. From there enter Field Test, then Universal Enabler -> Create New Config. Click on the four last check boxes VoLTE, ViLTE, VoWIFI and ViWIFI to enable these options. You won't be able to enter this setting if you haven't created the empty directory under point 1).
Go back to Field Test and enter Modem Setting to enable 5G if you haven't already -> RAT Selection -> SIM 1 Mode - > select GSM/WCDMA/LTE/5G or whatever you need + 5G. Go back and do the same with SIM 2 after, if you use it. Network mode in the network settings will then not show "5G prefered", but a number, like "26" in my case.
3) Go back to Field Test menu and enter IMS Stting. If you have Slot - 0 : OPEN / EU and Slot - 1 : OPEN / EU (or something else on each side of the / ), then you did everything right to this point. Exit the Hidden Menu and get your SIM out of the phone.
4) Enter th Hidden Menu again without the SIM inserted. Go back to IMS Setting and click on Slot - 0.
Under Subscriber enable IMS,ISIM & USIM.
Under Xcap\Ut. -> General, enable UT & USSD Over IMS
Under ETC, enable Check IMS Registration, Use rule-ID from responsem& Query on bootup
Under GPRI VoLTE/VoWIFi, enable VoLTE, ViLTE, VoWIFI & VIWIFI
Under Test, Preference Operator can be set as OPEN (what I did), or your carrier short name, or your County. Apparently does not make difference for some operator but some do require it to same name as theirs.
Preference Country this is important as this decides if VoLTE gets enabled, Find your country short code example USA is US , India is IN. Europe is EU. Find and try different short codes, I put EU.
Enable Support Volte AT command, VoNR, UAC Enabled & VoLTE Setting Enabled
You can now exit the Hidden Menu & insert your SIM back in. If everything went well, you should see the VoLTE icon showing up on the left of the network in the task bar, on the (my) Wing it's a small lifted phone headset with wave coming out of it. If you don't have it, check under the phone network settings - Mobile networks, if you got the VoLTE option and if it's activated. You might have to repeat some of the steps above with the SIM card inserted (as I had to) to make it work. Don't forget to check the settings for both SIMs if you use two. Not sure if all setting are kept if you reboot or reset the phone. You might have to repeat the preocess or part of it on each reboot, as for enabeling the 5G option.
Was tested on Android 12, as my phone didn't get Android 13 yet. But it's also working on my Velvet 5G that is on A13.
Many thanks to Baljeet Khairwal and johndaniel for their guides + all other persons who helped in the two threads.