Related
i installed the XDA Windows mobile 6 about 3-4 months ago on my SPV M3100,
everything worked fine untill just lately it started displaying just a plain white screen, not bricked because if i rapped on the power button a few times it would display everything normally?
problem is it has started doing it more and more often untill lately it decided to completely go white - i found out the phone still works just a blank screen? also some of the mounted buttons stopped working at times and would work othertimes?
ive fully charged it, turned it on and plugged it into my pc but im not sure what to do?
is it something to do with XDA, maybe some kind of virus or should i literally re-install the orange windows mobile 5 and send it back?
any help would be great! - im in a bit of a pickle here
thanks -Edd
wm6 spv m3100 white screen
hi there
if anyone is following this thread, i too upgraded first to 4.01 as good as gold, then to 4.30, Schaps ROM's. all fine but then the white screens started in 4.3, in the end about 10-14 days i had to remove the battery to boot the unit, and only thrn with PSU/USB plugged in, so power issue?
anyway i pushed thorugh to 4.31 alls currently well, keep you posted
cheers in all others senses great work all round
cheers pete
Yep, I've got this issue with my HTC Hermes but it only manifested itself after the upgrade to WM6?!
Can you ALL please tell us what bootloader you are running?
I followed the online instructions for getting Schaps WM6 ROM on board for my SPV. I shall dig them out.
mrvanx said:
Can you ALL please tell us what bootloader you are running?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=352857
Hi Folks
My Hermes/Tytn is an Orange M3100. Recently it has begun dropping calls, or rather, ignoring them. The caller could hear a ringing tone but the phone wouldn't switch on, show me an incomming call or anything. A short while later, usually after I'd switched it on (I mean, the screen, "off" is that it's on standby) I'd get the notification of a missed call. More often than not it would come through after I had made a call.
This reached a "point" on the weekend where I missed about 17 calls from the Agency to get work for me as I was the only one available
So. I upgraded as reccomended on here. Up to HardSPL 2.10, Radio version 1.41 and then upgraded to Schaps 4.22 WM6 Rom.
Now, I made sure that ActiveSync has connected and synchronised, and all my contacts and PIM info is in Outlook. However, A/S won't transmit the information to the PDA, even though it tells me it's synchronising.
The only way I have managed to get my PIM data/address book back onto the PDA was by running a custom SPB backup file to restore the calender, sms and phonebook.
This is where the fun starts. My PIM and Tasks then go "read only" merely by having a warning telling me I have no memory and to go and close other programs down. But there isn't anything else running!
Fine. Right. Ok. Obviously I've done something wrong. I did a hard reset this evening. It wiped all the data internally and reset it. I changed the details to match the username that was already stored in A/S and plugged it in.
It tells me "Connecting" and the green thing swirls around but doesn't actually do anything.
I have heard mention of the MTTY software, so I've got that here. But it won't allow me to connect on USB, only Com1, 2 or 3.
So I've a pretty useless phone at the moment. It's got none of my files on there, the satnav is rendered useless merely because I can't install the sod and all the other problems to go with it.
Short of screaming abuse at it and throwing it across the room I'm a bit stuffed. And I can't spend anymore time on it as I've got to be getting up for work at 4am (only finished tonight at 8pm ) for another full day
I've read the wiki, I've gone through the pages and pages and, er, pages of posts but I'm hitting a brick wall somewhere. I'm not as bright as you guys, but I get by.
TIA. Elwyn
Click to expand...
Click to collapse
The device is no longer worthwhile for me and have spoken to Mike Channon over it. If you can change that or help me change it I would be grateful
Mikechannon is the main man when it comes to the hardware side of things, if it was an early bootloader issue (related to bad NAND blocks) then thats what i was questioning your SPL version about.
If mike is confident it is the hardware problem then id take his word for it, the guy rocks
/me has to get his mikechannon ass kissing back into shape again hehe.
mrvanx said:
Mikechannon is the main man when it comes to the hardware side of things, if it was an early bootloader issue (related to bad NAND blocks) then thats what i was questioning your SPL version about.
If mike is confident it is the hardware problem then id take his word for it, the guy rocks
/me has to get his mikechannon ass kissing back into shape again hehe.
Click to expand...
Click to collapse
Not entirely sure what it is yet. If WM6 wrote to the 'wrong' part of the memory, would reflashing back to WM5 fix this?! Is there a way of repairing NAND issues?
MrVanx, I looked in the original thread that I posted in about this issue and followed you're link. Not sure whether I did or didn't at the time, but I can see there are instructions for downgrading the ROM from 6 to 5. However I am now in the situation that I can't use the USB cable as it causes it to white screen, but probably could if I did it via memory card....
white screen continued
hi there
sorry about lack of info i installed olipro 1.4 as per the instructions at the wiki i think. mine doesnt boot white, it turns white/fades to white when in use, or more commoinly i will press off after use, then later turn the unit on, and it will come white. first few times it si normal after 2nd on/off, then it stops completly requiring a hard boot, then that stops and it requires a battery off, then that stops. however it always seems to repsond when power connected, even if 100% charged or just off.
it feels to me like a power issue, still there in 4.31, wasnt there in 4.01, going back now to see if its hardware.
i will give as much info as you guys need, i got my phone from orange in may 2007
pete
white screen update
hello again
still on 4.31 activesync isnt playing at teh moment but anyway.
on the screen thing, if i leave the unit standby itself and then power back on it seems fine, so far 3 hours of good, no white screens.
thanks pete
hi there i face this problem with my imate jasjam sorry to tell you that but this problem is a hardware problem you be confirm that it hardware by push by your 2 fingers below the screen and above the keys like you catch"hold" something bush the power key again the white screen will be disappear .sorry if you don't understand me because of my English.
Hi everybody.
Anybody solved problem with white screen?
I have the same truble as EddTQ - White blank screen & also some of the mounted buttons stopped working rarely 2 week before white blank.
same problem here.
Maybe a radio problem?
Folks,
The problem you are describing sounds like the flex connector.
http://forum.xda-developers.com/showthread.php?t=321163&highlight=white+screen
This thread should give you some details. I had the same problem but phoned Orange who sent me out a new one in 9 hours!
exactly
What happes is exactly the problem explained by alkizmo ...
thanks.
OK, so I have an Atom exec and I tried to install a new ROM on it.
The process was going along quite well until the thing booted up for the first time and I had to 'align' the screen.
The problem is my old Atom Exec has a horizontal crack about two thirds down the screen and while this does make it hard to type on using the stylus the thing as a whole still works and I was hoping to use it as an alarm clock (OK, a stupidly overpowered alarm clock with wi-fi, bluetooth and a touch screen).
Does anyone know of a ROM that won't need me to align the screen?
Willing to try pretty much anything as at the moment is might as well be shiny paperweight.
U should search first. Now don't tell me that I am pissing u of as the same thing is avail on these forums somewhere, I have seen it.
OK U search for "MSP Remote Alignment" on the net and download the prog and it will automatically do the alignment for u. That is all I know rest u do and also explain here for others for future reference please.
Also read this:
http://forum.xda-developers.com/showthread.php?t=490245
OK, so the assumption that I haven't searched for this is a little rash. I have. I even found that program you are recommending (sure, I may have found it after my original post but I found it none the less) the problem is that as far as I can tell it can bypass the screen alignment but then I am left with a touchscreen that is totally useless..... any touch results in a 'top left' response.
Yes, this program will (accoring to it) inject the screen alignment information into the phone but as far as I can tell all it does is fire up the screen alignment program again.
Also you may have noticed that this program requires a soft reset of the phone and th epopular ROMs I have seen here require the installation process to go from start to finish without a reset.
So I was asking if anyone had had a similar problem before and could recommend a way for me to proceed.
Thanks
(and tjkhattak61, while it may not soundlike it I really appreciate your reply)
Wow......am I that harsh, lol. OK what I did is I made my self do this for u so u don't think we here at XDA don't help .
I tried it with a hard reset and after the calibration and soft reset I started of with the normal customization and every thing went well. Hope u satisfied now and sorry if u felt that I am harsh, meeeeee and harsh no way.
Thanks very much for you efforts, I will give it a go tonight.
ok, so I have hit a small problem.
The WM 6.5 rom installs fine (thanks!) but I still cannot align my screen and I have managed to lock the screen. The slider to unlock it will not work and I can't even update the ROM to start from scratch.
Any suggestions?
Also my experience with the MSP remote alignment is the same, the part where it skips the alignemnt works a treat but I cannot get it to align the screen for me.
I have read that there are applications out there that will let me remotely control the phone but so far I cannot find one that works (or that I am able to get to work)
Help much appreciated.
Thanks
OK can u try by pressing hard button for the windows key and going to settings and then with the help of the hard keys going to the System and then go for Screen. I did it once and I never used the Stylus please try it u may get to carry out the alignment.
Not all is going according to plan, I might just give up and invest in a new touchscreen (not that they are expensive).
I managed to get 6.1 back on it but functionality is low with out some semblance of touchscreen usage.
Oh well,
Thanks for all your help.
my girlfriends heros touch screen has stoped responding for instance if i press menu i can press scenes but while im in scenes and select a new one i cant press done i have to use the scroll ball... anyone had anything like this??
any help greatly appreciated
thanks
It happened to mine, the only thing you can do is send it back. It sucks but the screen is faulty.
Send her round with it........... I'll see if I can help
Seriously though, buggered screen I'm afraid..
Had the same problem. Sent it in for a repair and got it back in 10 days.
I've got the same problem!!! I used to say that it was the best phone I've ever used but my mind is changed! :S
Same problem here. I can type with the top and middle of the screen, but the bottom is less responsive/sometimes non-responsive, and backspace doesn't work. Dave Hagenaars: Did you have to pay for the repair?
Aslong as it's under warranty HTC will repair it for nothing. It seems it's a fairly common fault. It come's back with a sticker asking you not to leave the phone in your pocket whilst sat down. Bless them.
liam08 said:
Aslong as it's under warranty HTC will repair it for nothing. It seems it's a fairly common fault. It come's back with a sticker asking you not to leave the phone in your pocket whilst sat down. Bless them.
Click to expand...
Click to collapse
same problem here, i need put it back everything to stock before going to t-mobile shop. did u go to t-mobile shop or u just called them? thanks in advance
My touchscreen works fine when holding it upright, but when the phone is laying down it gets really unresponsive. Anyone else having this issue?
Since it works sometimes, I'm guessing it must be software issue...
Hey,
Sometimes my HTC Hero acts weird.
Sense starts to jump between 2 screens (as if I'm constantly giving it input) when I'm doing nothing.
Also sometimes a press anywhere on the screen makes the phone think I'm pressing something at the bottom.
And last but not least, sometimes when I try to type something I lose the function of both the bottom left and right part of the screen, meaning I can't use backspace, the L, P, A and other various keys that reside there.
Does anyone also have these problems?
Is this hardware related or can I hope that this problem is solved with the 2.0/2.1 update?
Mine does the same
It happens to me as well, and i bought it abroad so no repair for me
Also - mine does the CRAZIEST thing - i can move the screen without touching it!! This is crazy - i just hover the finger above it and i can move the desktop left to right ("feature" only available when teh screen starts to jerk around)
I have no idea what to do - it drives me crazy - all my presses are wrong, and some dont work at all!!
I have figured a "way" to make it normal for a while, i just press the end key to close the screen and then turn it on again and it kinda, kinda, works again.
anybody there knows whats is the fault? if its software or hardware?, anyway i sent mine for repair and still waiting.
It's a hardware issue, no doubt. I have experienced all the issues described in the last 3-4 posts. Will have to send it in for repair after christmas - but I'll probably have to get back to the original firmware first.
percypogi said:
same problem here, i need put it back everything to stock before going to t-mobile shop. did u go to t-mobile shop or u just called them? thanks in advance
Click to expand...
Click to collapse
Got it from phones4u mate. Took it in.
if you have a screen protector sticker try changing it, I did so and did make real difference
msehome said:
if you have a screen protector sticker try changing it, I did so and did make real difference
Click to expand...
Click to collapse
well i took off the screen protector, and still pretty the same issue. anyway but now atleast it's under repair. so waiting for the phone i hope to get it before xmas.
I have a dead spot around the O and L key when typing messages in the landscape position.
Should I back-up my phone and remove all private data when getting it repaired?
had a sticker - same thing
i removed mine as well - and same thing.
talked to HTC - but they dont have a repair place in Israel - so i will have to send it abroad to the UK maybe for repair.
I still dont understand - if this is a hardware issue - how does it fix it for a short while when i press the "end" key, and re-open the phone.
if the hardware was defective it should always happen and wont be "fixed" for a short while.
Same problem, dont believe it is hardware
Got the same problem when i update to another rom LOX or Hikari.
Wiping and going back to Modaco 3.0 and everything is perfect again. Have the feeling that it has also something to do with the radio images
Maybe also something to do in which order the roms and radio's are updated. Still testing but got the same problem. Reverting back to my modaco 3.0 nandroid and everything works again.
For me this is the stable version where the bottom line works:
Firmware: 1.5
Radio: 63.18.55.06EU_6.35.06.18
Kernel:2.6.27-mck-teknologist-1.9
Build:Modaco Custom Rom 3.0 Core, SSH
Softwareversion:1.0.0A6288
Gdoll said:
Got the same problem when i update to another rom LOX or Hikari.
Wiping and going back to Modaco 3.0 and everything is perfect again. Have the feeling that it has also something to do with the radio images
Maybe also something to do in which order the roms and radio's are updated. Still testing but got the same problem. Reverting back to my modaco 3.0 nandroid and everything works again.
For me this is the stable version where the bottom line works:
Firmware: 1.5
Radio: 63.18.55.06EU_6.35.06.18
Kernel:2.6.27-mck-teknologist-1.9
Build:Modaco Custom Rom 3.0 Core, SSH
Softwareversion:1.0.0A6288
Click to expand...
Click to collapse
I have a similiar problem on my Hero. Did you find a solution to it?
What's weird is that it isn't constant. It comes and goes.
But when flashing the cya mod with 2.1 my phone was stuck on the enter sim card code screen.. Could not press OK to continue.
I have had problems with my HTC HD2 for a couple of weeks with things like the home button not working, the screen going to landscape all the time even without turning it side on, when I am making calls the speaker turns it self on and goes into landscape too. I have upgrade the o2 rom from HTC to 1.72.206.3 (86372) WWE and that fixed the problem for 2 days now its returned to doing whatever it likes. Please help as I love the phone but its driving me mad.
'stuck in car kit mode', , , hardware fault, the usb port is shot, save yourself weeks of trying to fix it and just send it for repair.
http://forum.xda-developers.com/showthread.php?t=619859
on the plus side, o2 replaced my screen too, and its much better than the screen it shipped with.
Would it worth doing a hardware reset 1st before sending it back?
only from the point of view of not sending them your contacts and data, , they will flash the latest rom anyway.
The big danger is if you have hspl installed, in which case you MUST remove it, else they will refuse to fix it.
Oh and if you have unlocked the network, you will need to get a new unlock code, cos the IMEI will change when they change the mo. board, and it will be locked again.
Great thanks will get it sorted out this weekend then. HTC said they would look at it to. Which is the best option. I dont know what hspl is so I dont think I have it on the phone
ahh well you would know if you had hspl'd.
O2 were fine for me, gave me a freepost address to use, and i got it back 6 days after posting.
Hey Com,
I got some problems with my u20i x10 Mini Pro. It was stuck in some boot loop like 1 month ago and I tried to reflash it with SEUS and this flaher App thing thousands of times. I did not have a little bit of success so i gave it up 3 weeks ago. Since then i had my phone laying under my desk without the battery. Today I decided to try it again and, GOD KNOWS WHY, it started up normally. So i finished the startup wizard and everything worked fine. Then i rooted it with superoneclick (my phone had A.0.6 FW), rebooted and everything worked just fine. Then I wanted to sign in to my wireless network and for some reason it did not work, but whatever. After like half an hour my phone started lagging really hard and suddenly the screen went black. I tried to push all the buttons and the screen went bright for a very little while and went black again. And this point it was like it was turned off. So i tried to turn it on and, guess what, its stuck in a boot loop! YAY! Now my phone is lying in front of me and all i can see is the only white SONY ERICSSON logo.
Seriously what has happened? Anyone knows how to fix that?
Thanks in advance, Martin.
UPDATE:
Now I am facing a new problem. My device turns "on", I can see the white SE logo, then the screen goes black but for some odd reason the touchscreen is reacting at the lower left and right parts of the screen. I can even dial a number (i hear the beeps) when I press twice at the lower left corner and then tapping at the display. But well, i guess thats not how the phone should work. So did any one also face this problem? Do you have a solution for that?
Anyway, Thanks in advance.
Kind Regards, Martin.
thing is..
Your posting skills are zero..
Using profanity is one thing, but using it in the topic? Surely a 99% ignore from most members!
Id go back and edit your posting if you are actually capable of using better language!
Nochances,
Wow, you must be one big loser, your first post is to criticise someone the way the lay out a question script.
nochances said:
thing is..
Your posting skills are zero..
Using profanity is one thing, but using it in the topic? Surely a 99% ignore from most members!
Id go back and edit your posting if you are actually capable of using better language!
Click to expand...
Click to collapse
I'm sorry if i offended you in any way but at the time posting this i was really stressed out. And i apologize for my bad English, I'm not a native English speaker since I'm from Austria.
Have a nice Day, Martin.