O2 EXEC WM6 AKU 7 - 'Standard' tone - iPAQ rw6828, XDA Atom Software Upgrading

standard tone in sounds and notification does not sound at all. Also, is there a way to get the programs without that grouping ???
Please fix the standard tone problems thats the only thing that makes it imperfect

you can use softaware Mring..it can play ringtones stored on storage and storage card....

Related

Volumes: system and phone

I went trhou the forum, but I couldn't find an answer...
I know that Journada 928 has a sligthly different volume management that allow you to set different volumes for system (when you use any software, including media player and so on) and phone (when it rings).
The XDA seems not to support such config. I saw that you can change the volume during a telephone call, but you cannot make anything on the ring volume. Is there any solution?
Regards,
Hi ...
It seems you have a PPC2002 ROM. You have to upgrade to any WM 2003 ROM. It has 2 sliders for the system and the phone volumes.

Some questons: radio and sound

Hi.
I`ve 2 questons...
1. Sometimes I miss calls because xda doesnt respond to call - even no missed calls... What to do ?
2. Very often sound disappear... I mean if I hear for mp3 music and somebody calls me - sound turns off in programs (including windows media player and other), but call signal works... What to do ?
ROM version - 3.17.03 ENG
Radio version - 4.21.00
PS: Sorry 4 poor english...
I don't know if I've had exactly the same problem as you, but I have had similar problems. I found if I leave an MP3 player open in memory this situation occurs. I use PocketMusic (or did until yesterday) and leaving PocketMusic open in memory caused all sound to disappear until I killed off PocketMusic.
Hmm... I dont need to open any players to problem occur
Even after restart when a call anyone after that sound disappear
Is it problem of XDA or Windows ?
Is anyone knows util for volume change ? Just like in any desktop windows ?
I`ve found a decision...
Sound works fine in windows ppc2003 - just upgrade your xda
And hold Phone program in a memory - and everebody can call u
I don't know whether this is the same problem but here goes...
I also use PocketMusic (marvellous player) and noticed that when I had incoming calls that the phone would just do the default system beep at me. I tried going to the sounds and notifications control panel to play the "Old phone" ring tone however it just beeped at me...
I then realised that I'd selected .wma in PocketMusic as one of the file types that were associated with PocketMusic. I un-ticked wma as a filetype to be used by PocketMusic and it worked again.
This may be what your problem is.

MP3 as ringtone, possible?

Hi,
Is it possible to get mp3s as ringtones to MDA2? For midis, it's only a little plugin, isn't there same kind of plugin for mp3?
edit: Subject updated
ms like to push their WMA so thats the easiest thing to use
you can use a program like CDex which is free to convert mp3 to
wma
Well that might be the easiest way. Anyone have an idea why wma is allowed only as ringtone? It can't be assigned as alarm for example...
yeah it's odd guess they made the addon for rings because people wanted to have odd phone ringtones
and maybe the demand was not big on normal notifications so they dident bother
maybe it'll be in CE 2005 if it's not already supported in 2003SE
It's not supported in 2003 SE, I have installed it on my pda. I was hoping that more formats would be supported but no.. :?
You ca use MP3 for ring tones but you need WM10, In WM2003SE just ver 2.20 have WM10 .
wm10
i have xdaIIi which i was pleasently suprised to find has wm10 - however i can't find a way to use mp3 as ringtone - how is this done?
mp3 set as ring tone
this cab file let you set the mp3 tone as ring tone in your xda just install in your xda and choose your mp3 from the explorer and press with hold you will see in the drop menu set as ring tone.
With the Himalaya device?
Regardless of OS version?
I use caller id version 1.20 (build 18567)... i can assign mp3 ringtone for my contact... but i don't know whether this is because i use wm2003se ver. 2.20 chs or just because of the caller id.
anyone else want to try?
mp3 as ringtone
you can download audacity software, you can edit your favorite mp3 files and set the same as your ringtone....
Can anyone advise?
I've installed EnglishMP3SetRingtone.CAB as recommended on another topic here but am having no luck adding ring tones.
Viewing mp3s stored on my storage card I don't get the option to install as a ringtone by holding down over it.
If I look in the phone settings under system, I can see all the mp3s I have placed in Windows/Rings but if I select one & then press play no sound is heard. The only tone that does work is the default tone? Even stranger the other default tones that were installed on the phone such as bass, old phone & 02 tone are still listed but in the actual win/rings folder have disappeared.
If I go into Phone Contacts & try to assign ringtones for individuals it won't display any mp3s. Is the EnglishMP3SetRingtone.CAB meant to enable this to display MP3s?
This is all happening on an XDA 2i running Win 2nd Edition version 4.21.
Any advice gratefully appreciated.
Re: mp3 set as ring tone
broadway said:
this cab file let you set the mp3 tone as ring tone in your xda just install in your xda and choose your mp3 from the explorer and press with hold you will see in the drop menu set as ring tone.
Click to expand...
Click to collapse
Thank you broadway. It worked very well.
Re: mp3 set as ring tone
broadway said:
this cab file let you set the mp3 tone as ring tone in your xda just install in your xda and choose your mp3 from the explorer and press with hold you will see in the drop menu set as ring tone.
Click to expand...
Click to collapse
works on all ROM version? XDAII only?
how to use the mp3setringtone file
hi,
the file mentioned is a zip file and when i unzip it on my laptop it has 4 files. where is the cab file and how can i install it.
thanks
Re: mp3 set as ring tone
keeping_sg said:
broadway said:
this cab file let you set the mp3 tone as ring tone in your xda just install in your xda and choose your mp3 from the explorer and press with hold you will see in the drop menu set as ring tone.
Click to expand...
Click to collapse
works on all ROM version? XDAII only?
Click to expand...
Click to collapse
i cant set mp3 as ringtone
i have execute cab file and add registry to wm registry
can u explaint how to install it ?
Phreakazoidz
O2XDAII
Rom XDA2JoJo+Sim Merged
The problem as I found is to do with either Pocket TV or pocket Divx. Can't remember which but if one of these is installed it stops MP3 as ringtones being displayed once you've installed the .cab.
Other than a hard reset I couldn't find away around it.

Ringtone problem with all WM6.1 Roms

I have been updating my G4 with all the WM6.1 roms here and it seems I get the same problem everytime, That is the ringtones work fine after flashing, but after sometime there is no ringtone and it automaticaly goes back to the default Windows 6 ringtone, Please can you assit me on this issue
prudy27 said:
I have been updating my G4 with all the WM6.1 roms here and it seems I get...
Click to expand...
Click to collapse
1. Where did you put your ringtone?
2. did you make any tweak to the ringtone path?
3. Which rom are you using?
4. did you try the "1d" ?
Strange... I have used a lot of the G4 ROMS here and I haven't had that problem. Make sure that you saved your ringtones in the correct folder, and everything should be fine from there...
I had the problem when installing an audio player and assigned the mp3s to this player.
Try to let windows handle the mp3 files and uncheck the file association in the player preferences. Then windows can play mp3s again...
I put the ringtone in the rings folder in the Windows directory, and which tweak are you talking about? Can you explain the tweak please maybe this will solve the problem
thanks
I have the same problem, with 6.0, I was able to use any mp3 ring on the phone. Now with 6.1 they don't work.
I moved the ring back and forth from the My ringtone folder, and the windows folder. I can use Audio Mgr to set the custom ring to the phone, and it works until I open the phone menu/options, it reverts back to the pre-loaded ring. The custom ring doesn't show up in the options list, but is still in the Windows folder, or My Ringtone folder.
There's another thread in the forum. WM 6.1 has a size limitation for mp3 rings, you have to cut them down to around 8secs of play
I pasted the link for the cab file for the trimmer app. Works fine on my Tilt
http://forum.xda-developers.com/attachment.php?attachmentid=91925&d=1213191106
megatec45 said:
There's another thread in the forum. WM 6.1 has a size limitation for mp3 rings, you have to cut them down to around 8secs of play
I pasted the link for the cab file for the trimmer app. Works fine on my Tilt
http://forum.xda-developers.com/attachment.php?attachmentid=91925&d=1213191106
Click to expand...
Click to collapse
Classic case of MS crippling their own products...

sprint Touch Pro help

Hi everyone.
I just got a used TP. I am thinking about flashing a new rom, when i enter the boot loader at the very top it says security unlocked. does this mean that this phone has been previously flashed? only other phone i have ever done is my mogul.
Tony
I dont think so
I believe that they all say that, what you have to look for is the SPL version... My Touch Pro (Unlocked) shows the following information...
Security Unlocked
RAPH800 MFG
SPL-0.25.CMONEX
MicroP-Raph (LED) v0C85
MicroP-Raph (KEY) v0685
PSOC-Raph STAGE_EVT v20
Serial
I think, as stated, that the main concern you should have is the SPL since that is what you have to flash to unlock the Touch Pro.
Hope this helps.
Yep I just unlocked the SPL so now the task is to find a good rom to flash.
T.
Now if I can just find a Rom that allows me to use MP3's for text messages as well as ring tones, this is my biggest heart ache with windows mobile.
arthoes said:
Now if I can just find a Rom that allows me to use MP3's for text messages as well as ring tones, this is my biggest heart ache with windows mobile.
Click to expand...
Click to collapse
I don't know about txt messages, but the ability to use mp3 for ringtones has been around since WM5. Simply get whatever you want as a ringtone to a folder called ringtones or my ringtones. Alternatively, the HTC music player will allow you to set whatever song you are playing as a ringtone.
Yes you can use any mp3 you want for a ring tone. However WinMo makes you use .wav files for system sounds such as SMS or MMS. This irritates the hell out of me. We can make our phones work as a car alarm remote, wifi hotspot and play Xbox 360 yet I can not seem to find a way to use the same mp3s that I have for ring tones for incoming SMS and MMS.
i do believe if you make a copy of an mp3 and put it in my docs/ringtones you will be able to select it for a tone for sms/mms. but it wont quit, it will play the whole song. (iirc) and mp3 trimmer will break it up to a short tone. it has been a while since i use the stock sounds now, but i believe it works that way. i have even had short wav vids that would show up in sellection list, but would only play the sound.

Categories

Resources