Hi everybody,
i've got a big problem with my s200 G4.
when i flash it ti wm6, it work about 1 day, and after it freeze.
since, i can't turn on it. When i plug the power supply, no LED :/
I try the battery on an other S200 (i've got 3 ) and the battery is ok.
Anyone got the diagram of the motherboard ?
Other idea ?
Hello
I have the same problem
Do you found the solution ?
lot of people have the same problem
Hi,
After open my S200, i think this is a capa out :/
Lot of people after upgrading the s200 have got the same problem. Freeze , reboot..freeze ....and never work again
Have you got a red led ? orange ?
charging ok ?
i had the same probleme
the solution is to remove the battery for 24 hour after plug it in the usb with ur computer until the charger leed appear
after change the rom to a wm5 rom and it will work perfectly.
i think the reason of this probleme is the ipl version must be 2.20 beafore upgrade to wm6
tried and failed :/
Hi,
I test your technic, but doesn't work. Now, when i plug the charger, i've got the red led 1 second, and ....nothing. it doesn't won't to switch on
i try the trick with the pins...but doesn't work
tried and failed :/
Hi,
I test your technic, but doesn't work. Now, when i plug the charger, i've got the red led 1 second, and ....nothing. it doesn't won't to switch on
i try the trick with the pins...but doesn't work
Hi,
Same problem, when I put the charger in I got one sec red led. But I can hard reset or enter bootloader, when on the charger, but there is no way to put USB when the charger is in. Which pins are + and - battery?
If any Prophet can enter bootloader, it can be recovered. See the wiki for a how to.
prophet with white screen and red led
hi everybody.
After trying again and again the pin trick, the s200 went to a blank screen, white with the red led.
I wish it reboot again...
if you got any idea to enter bootloader when i've got white screen ....
Can it enter bootloader? Hold down the camera button and soft reset.
the same problem
i have G4 with ipl and spl 2.20 and on switching on it freeses with white screen. it goes to bootloader, but except WWE ship 220 update others can't be loaded.
Sometimes it goes to screen "Windows mobile", but then freeses.
Is any solutions? Thanks
Jahn11 said:
i have G4 with ipl and spl 2.20 and on switching on it freeses with white screen. it goes to bootloader, but except WWE ship 220 update others can't be loaded.
Sometimes it goes to screen "Windows mobile", but then freeses.
Is any solutions? Thanks
Click to expand...
Click to collapse
Can you perform a hard reset?
no bootloader..just white screen
l3v5y said:
Can it enter bootloader? Hold down the camera button and soft reset.
Click to expand...
Click to collapse
I can't access to bootloader. :/
nyco said:
I can't access to bootloader. :/
Click to expand...
Click to collapse
Can you do a hard reset?
Yes i try again and again...but ...
white screen ( flashing )and red led :/
snif snif
Try to enter bootloader (soft reset and camera button), it doesn't matter if it shows nothing, disable activesync connect through USB, and try to flash a WM5 ROM.
Ok, i'm trying it this evening...
But when i plug the s200 on my PC, nothing show the phone is connected (USB mode on winXP or on the tel )
Well...i tell if your tips work tomorrow =)
The point of this technique is to reduce the number of points it could fail, and remove the requirement for the previous ROM to work. The RUU for shipped ROMs can establish a connection without activesync.
Well ...
But i forget to say ...the s200 can't power on when it's plug on USB...it power only with the charger
With USB, no LED, no screen ....
Have you got a tips to connect the phone with charger+USB cable ?
Related
Hey guys and gals,
In desperate need of help. Tried to upgrade my himalaya with the Asia O2 XDA II WM 2003 SE Upgrade.
Upgrade was unsuccesful; upon turning on the XDA there are only two things on the screen; near the top, it says 'Serial", and near the bottom, "v 1.06".
The xda will not respond to hard resets nor soft resets. What can I do to recover from this disaster? When cradled, it will not connect via usb to activesync.
If this is not user servicable, does anyone know a good place in Melbourne, Australia to fix the himalaya?
Any help is appreciated!
When it's docked in the cradle, does SERIAL change to USB?
Try this:
Take out the memory card (if you have one) and the battery. Not sure why the memory card, but mine had problems with it in when I tried to upgrade.
Wait 30 mins or so for the battery backup to flatten/wipe everything (You loose everything on a ROM upgrade anyway)
then plug the battery back in and recradle it and simply try starting the flash again.
I've had similar problems, but this has always worked here and we have different devices, but I feel confident that the same solution may work.
had the same problem... my solution was docking it in the cradle (it does not show connected) and reinstall the ROM
Failed upgrade of XDAII
Hello I was in the process of updating my XDA rom and after 50% was copied to the device it dropped out.
Now when I power on the XDA it hangs on the O2 screen and my rom flash program cannot talk to it.
I have tried taking the battery out and leaving it for an hour but this has no effect.
Any ideas?
Installing rom from the SD card on boot
Is it possible to do this and if so how would I go about it?
If I cant get an OS on it its going to have to go away for repair for 3 weeks.
Also have you done a few upgrades on your XDA2 and on the same PC?
I had the same issue with my XDA2 as I was upgrading to 2003SE (before getting a 2i) and I could not get any further than the USB 1.01 screen.
I installed Activesync on a laptop, put the USB in and put my 2i in to complete the installation. Then, I put the 2 in and tried rerunning the upgrade...worked first time! I'd spent 6 hours on my PC trying to get it working.
Worth a try, certainly!
Cheers
Anthony
screen shows USB at the top and v1.06 at the bottom. HELP !!
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
forgot to mention that I tried the things posted earlier !
I tried taking battery out for 1/2 hour and then the hard reset. Still nothing
Help !!!!
My wife is going to kill me because I just bought this XDA 2 and now it is dead ! (like me soon !)
disastrous xda upgrade
try consulting dr. stein or toenailed or xda jojo and zeroxtreme. these are the tech guys in southeast asia. they're very good! :lol:
Have you tried rebooting into Bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time), then trying to rerun the upgrade?
Re: screen shows USB at the top and v1.06 at the bottom. HEL
maij said:
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
Click to expand...
Click to collapse
When you started the upgrade did all seem to go as planned? Did you have the power cable plugged in whilst upgrading? Did you notice any strange messages when it started to upgrade, and how far roughly did it get before you started having problems?
Also, what was the software version before you upgraded? Any ideas?
Cheers
Anthony
Hi Anthony: Everything seem to be going ok and then..
the screen went blank. I did have the AC plugged in during the attempted ROM conversion from Chinese to English and I tried rebooting into bootloader mode and nothing.
Do you think my 02 XDA2 can be fixed ?
Thanks
downgrade XDAII failure
Pals ,
I also facing the same problems , now my XDA II is blanked and only
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ?
thanks
if the screen shows you something like serial1.something you're still okay. do a couple of hard resets; then put the unit back on the cradle. as expected activesync will not recognize the device BUT double click the upgrade file again.
this happened to me when i went to wm2003se; forgot to do a soft reset and proceeded with the upgrade. what i did was uncradled the unit, did a hard reset (screen still showed serial1.06), cradled her back (nothing happens here) then doubled clicked on the upgrade file. it proceeded accordingly until the entire process was completed.
dont' fret, as long as something's still showing on your screen you're still a-ok.
Thanks Robs..
I will try...
Yeah, after hard-resetting the unit, it seems that it did not reset because the serial/usb letters & v1.07 at the bottom of the screen is still there. But if you drain the battery, then put it back in the cradle & restart the ROM upgrade, it will work. At least it did for me.
As I've also said but seems to have been ignored, try running the upgrade on a different PC...you may be surprised!
Cheers
Ant
thanks Anton ...
I tried so many times in my pc until the sync wont work anymore , so i tried to do at my laptop ... still same .... should i change to another pc again ? pls advice , thanks man.
Dear O2inCN
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Re: Dear O2inCN
sbudiarta said:
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Click to expand...
Click to collapse
Hi, did you manage to downgrade to WM2003? Was your bootloader version 1.06? I had problem in downgrading from WM2003SE. Hope to hear from you. thanks.
Hey everybody !!
It's not the first time i upgraded my G4... everytime I followed RISIDOROS step by step tutortial and it worked fine (didn't modify the ipl/spl) thnx for that by the way !!
Well but since i wasn't using crossbow I decided to upgrade again. This time I tried to use Farias step by step guide for upgrading G4's
I got to step 3 (Shelltool) the problem was that my device showed an error message that it couldn't open some exe file. and stopped. while the shelltool said the ROM was written fine!
so I didn't hard reset, I simply disconected the usb cable and conected it again and tried again, but Shelltool would stop responding!!
The o2 mini s .. still showed the first splash screen but got stuck there. IPL and SPL unmodified!
I thought the best way to repair the phone would be to simply put the O2 original Rom on again.
but It showed a conection problem. So i took out the battery and turned it on again... again i got stuck on the splash screen!!
When pressed the soft reset the device turned itself off but didn't start again .. so one more time I took out the battery and it turned back on and got stuck on the splash screen
so I took the battery out for the third time and tried everything to force bootloader.
camera + on button
voice + camera + soft reset
camera + soft reset
but nothing ... after taht the phone is simply dead
since the phone started 2 times I don't think it\s totally bricked, could it be that the battery is just to weak ?? It doesn't charge when I plug it via USB .. please HELP
Have you the Dockingstation? Use them to Charge it or use a other Lithium Polymere Charger. I think it isnt Bricked only a damage OS Partition. After Charging ... you must only reflash with your Provider Firmware and try again to Flash a other Rom.
For now I only have the PC usb cable...
Is there some way to connect the battery directly to a AC adaptor that produces 13 VOLTS ??
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dioxda2 and claudy fa for such hard work Thank you guys,
crazy_luv said:
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dia_dxo and claudy fa for such hard work Thank you guys,
Click to expand...
Click to collapse
..
..
..
Please check you battery..
..
..
..
what do u mean by checking my battery it's fully charged 98%
crazy_luv said:
what do u mean by checking my battery it's fully charged 98%
Click to expand...
Click to collapse
1. How long have you been using your battery?
2. 100% charged is not equal to a healthy battery,
3. normally, the longer year the battery you use, the weaker the battery performs.
4. just .... if you have the other new battery, test the result, or
5. you can also check if the your problem will be the same if AC charger is plugged.
just wanna assist.
1. i have been using my battery for 2 years.
2. battery lifetime varies from 1.5-2 days.
i dont have my AC charger close, so do u know another way to check battery health ?
crazy_luv said:
1. i have been using my battery for 2 years.
2. battery lifetime varies from 1.5-2 days.
i dont have my AC charger close, so do u know another way to check battery health ?
Click to expand...
Click to collapse
1. you may connect the usb power to make a softreset, and to see you problem exists or not,
if no more problem, that means the battary MAY BE not healthy enough to bear the
high(for micro electronics) electric consumtion for prophet rebooting.
Good Luck. Just one of the ways to find your answer logically.
By the way, for monitoring your battery, you may use the battery status.
I can't help you with the boot issue, but your DTMF problem is already covered in the CE thread. Just open that thread and use "search this thread" from the top-bar using DTMF as keyword. Your answer will be presented within a split second.
SUCCES!
As for your dialog with dioxda2, I think you are talking about totally different things......
rondol1 said:
I can't help you with the boot issue, but your DTMF problem is already covered in the CE thread. Just open that thread and use "search this thread" from the top-bar using DTMF as keyword. Your answer will be presented within a split second.
SUCCES!
As for your dialog with dioxda2, I think you are talking about totally different things......
Click to expand...
Click to collapse
Dear rondol1,
He has 2 problems, I am helping only one of them (not rich enough..... )
and you, you had completed his answers.
dioxda2 said:
Dear rondol1,
He has 2 problems, I am helping only one of them (not rich enough..... )
and you, you had completed his answers.
Click to expand...
Click to collapse
Together we will manage... But you are talking about battery condition as a solution for his "stuck in bootloader" problem? I am under the impression that you misunderstood his question. But then again, it could also be me who misunderstood!
I think the 'battery' may be something to do with the power provided by the USB port.
Try entering bootloader with the AC supply in.
RE:1. am not able to send DTMF during the phone call
crazy_luv said:
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dioxda2 and claudy fa for such hard work Thank you guys,
Click to expand...
Click to collapse
About this "1. am not able to send DTMF during the phone call "
try to find in registry this key (EnableDTMF) and change it to 0
i know is very strange, but it works...
Hi all
I know that there's millions of threads about this but believe me I've read them all and nothing seems to work for me.
I'm trying to upload a new room in my prophet but as soon as the mobile reboot nothing else happens. I've got a black screen and nothing else.
I've tried all the key combinations to reach the bootloader I even tried to run bootloader.exe directly from the mobile but nothing.
At this moment I'm pretty stuck with the room I've got and I really want to change it , any advice ?
I've tried:
camera+softreset
Commanager+softreset
in both cases I kept press the camera and commanager botton .
I've also tried other combination but without the behaviour expected.
Thanks in advance
Look forward your reply
All the best
Pedro
Turn the device on, whilst it is booting try holding the comm manager button and do a soft reset.
Try performing a hard reset (hold BOTH the camera and the comm manager buttons and soft reset), to see if you get text displayed. Don't bother actually doing one.
What ROM do you have at the moment? Have you tried unlocking (sim) your device? Have you used hardSPL or SoftSPL? What numbers are shown after the device boots up (red text in the top left of the screen)?
I´m using Shadow_My_Edition_2_no_DualSIM.
I've used HardSPL
ipl 2.9.000.1
spl 2.g4.4pda
gsm 02.47.21
os 5.2.20.21
I've started facing this issue only after this room has been uploaded, other odd thing that my prophet is doing is that the prophet only reboot if it is connected to the usb port in my laptop or to the charger directly, otherwise it enters in a continuous reboot.
I'm trying to get rid of this room but I'm not able to ....
maybe solution
http://forum.xda-developers.com/showthread.php?t=292667
try my solution for that kind of problems connect it to charger as described and then do a flash of a basic rom.
possibly u flashed a wong rom
Hi
That was a great solution, fortunately I there was no need to get so far .
Guess what I've changed the USB cable and the flashing procedure went as expected.
It´s kind of strange the behavior that my was getting but now I'm track again , ready to flash and test some rooms.
Thanks all for your replies.
BR
Pedro
anyone help!!!
my HD2(Tmobile USA) wont turn on AND WHEN I PLUG IT TO THE WALL CHARGER THE LIGHT DONT TURN ON !!
YES I DID HSPL ALREADY EVERITHING HAS BEEN WORKING UNTIL I DOWNLOAD 2.09.51 Radio
THEN MY HD2 DIE...!
I HAVE DONE THE FOLLOWING
PRESSED RESET ON THE BACK
TOOK OUT THE BATT
ANY IDEAS ?
flash the stock rom
flash thru stock rom by sd card.....don't use radio 2.09...it's complicated as of now....
tmo stuck rom http://conflipper.com/shipped/Leo/RU....08_2_Ship.exe
HD2 DEAD
BladeKnight said:
flash thru stock rom by sd card.....don't use radio 2.09...it's complicated as of now....
Click to expand...
Click to collapse
it doesn't even turn on at all !!! cant go to bootload or anything to turn on
even i fyou took of your battery????????????
so your hd is out
I trie radio 2.09 with tmous 2.10 and with some roms no boot,just stay at white screen htc and with last energy start up but have some bugs
I have the same problem. Was fixed when i flashed back 2.08 radio
Gman25 said:
anyone help!!!
my HD2(Tmobile USA) wont turn on AND WHEN I PLUG IT TO THE WALL CHARGER THE LIGHT DONT TURN ON !!
YES I DID HSPL ALREADY EVERITHING HAS BEEN WORKING UNTIL I DOWNLOAD 2.09.51 Radio
THEN MY HD2 DIE...!
I HAVE DONE THE FOLLOWING
PRESSED RESET ON THE BACK
TOOK OUT THE BATT
ANY IDEAS ?
Click to expand...
Click to collapse
Remove the battery for 10-30 mins then try to enter bootloader again, I have experiecned some serious issues around the 2.09 radio also.
Regards
Flashmore
HD2 doesn't turn on(so i can get to bootloader)
vescobg said:
I have the same problem. Was fixed when i flashed back 2.08 radio
Click to expand...
Click to collapse
how did you get it to turn on !!! my HD2 wont turn on the screen is 100% off and even the light that shows when is charging won't turn on !!!
once i've instaled leopard and before that radio 2.09... it booted and worked ok till first reset... when it froze...
i did a hard reset... via key press.... and without reseting it i conected it ti active sync and changed the radio...
HD2 doesn't turn on(so i can get to bootloader)
ccezar2004 said:
once i've instaled leopard and before that radio 2.09... it booted and worked ok till first reset... when it froze...
i did a hard reset... via key press.... and without reseting it i conected it ti active sync and changed the radio...
Click to expand...
Click to collapse
But my HD2 won't turn on at all !!! so i can get to bootloader
Gman25 said:
anyone help!!!
my HD2(Tmobile USA) wont turn on AND WHEN I PLUG IT TO THE WALL CHARGER THE LIGHT DONT TURN ON !!
YES I DID HSPL ALREADY EVERITHING HAS BEEN WORKING UNTIL I DOWNLOAD 2.09.51 Radio
THEN MY HD2 DIE...!
I HAVE DONE THE FOLLOWING
PRESSED RESET ON THE BACK
TOOK OUT THE BATT
ANY IDEAS ?
Click to expand...
Click to collapse
dude 2.09.51 Radio is not for T-Mob Rom thats why not working lol
HD2 doesn't turn on(so i can get to bootloader)
turborider said:
dude 2.09.51 Radio is not for T-Mob Rom thats why not working lol
Click to expand...
Click to collapse
i went to the radio tread for HD2 (i guess Tmobile is special!!)
THATS SO [email protected]#@# UP i hope there is a fix !!! it wont power on at all or the light when is charging
Gman25 said:
THATS SO [email protected]#@# UP i hope there is a fix !!! it wont power on at all or the light when is charging
Click to expand...
Click to collapse
ok i will tell you how to do it,do you have in your device HSPL2 ' HSPL 2.08,if yes then do Task29 wich you can find in this thread http://forum.xda-developers.com/showthread.php?t=644781 and if you dont know how to use it watch this video http://www.youtube.com/watch?v=DtTDuc4V4cU it will show you,then get a Rom of Your Choice,i always recommend plp to Get Dutty's Rom for Base 2.10 T-Mob couse the Radio is Inside cooked,when you installed it do Hardreset and is all done,hope this will help you m8
Try to keep the phone with the battery out as pointed before. Then, in a few hours, try to put the battery back in and see if it starts in bootloader!
HD2 doesn't turn on(so i can get to bootloader)
turborider said:
ok i will tell you how to do it,do you have in your device HSPL2 ' HSPL 2.08,if yes then do Task29 wich you can find in this thread http://forum.xda-developers.com/showthread.php?t=644781 and if you dont know how to use it watch this video http://www.youtube.com/watch?v=DtTDuc4V4cU it will show you,then get a Rom of Your Choice,i always recommend plp to Get Dutty's Rom for Base 2.10 T-Mob couse the Radio is Inside cooked,when you installed it do Hardreset and is all done,hope this will help you m8
Click to expand...
Click to collapse
in the video it say i must get connect sync etc. my HD2 is like when you first get it (no life, it won't even show that is charging!!)
my HD2 wont turn on at all so my pc dont see it !!! i have a 100% black screen (no life)
Gman25 said:
in the video it say i must get connect sync etc. my HD2 is like when you first get it (no life, it won't even show that is charging!!)
my HD2 wont turn on at all so my pc dont see it !!! i have a 100% black screen (no life)
Click to expand...
Click to collapse
Maybe it's coincidental damage. It may have actually died when u were flashing or after. Otherwise you only chance is to remove battery press your power on buttons w/out the battery (helps discharge any remaining power) and wait awhile, then try to turn on with just power plugged in and no battery, then with battery. If that doesn't work, then take it back to wherever you bought it and exchange. They won't know the difference. Make sure you remove your stuff from the data card first. Good luck..
Talk to the pros.
I would contact GSLEON3 or jockyw2001 to see if they can help you with your problem.
Gman25 said:
it doesn't even turn on at all !!! cant go to bootload or anything to turn on
Click to expand...
Click to collapse
so no charging happens when you charge the phone?
Gman25 said:
in the video it say i must get connect sync etc. my HD2 is like when you first get it (no life, it won't even show that is charging!!)
my HD2 wont turn on at all so my pc dont see it !!! i have a 100% black screen (no life)
Click to expand...
Click to collapse
i think you had a broken HD2...better return your unit for warranty...and check your sd cards heheheheh..