Related
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
paperuccio said:
Hi there! I have an MDA II and a Parrot CK-3000 (with sw ver. 3.13) carkit. I read about the outcoming of this sw and I decided to install it on my MDAII. But, after a correct installing procedure, it simply doesn't work: my carkit remains mute like a fish!!! :shock: I'm asking you, guys already use successfully this sw, a hand of help to solve my trouble (if possible). Note that I downloaded it from this
http://bluetooth.i-networx.de/index_e.html
and I tried to follow all the instructions placed in there...
Thank you all!
pap
Click to expand...
Click to collapse
Why not email the author, he is most helpful.
Had the same issue with the Parrot. My Plantronics headset works a treat, but not the Parrot.
I mailed the author who confirmed there are some problems and a new release will be needed.
As the author is doing this work unpaid and the functionality is so good, I can wait.
@ mrg2003
I send an e-mail some days ago but still had no response.
Anyway, I agree with IanF and I'll wait for the new release.
I wish I read this bulletin board more often.
Yes, I have exactly the same problem with the CK3000 (v3.13) and PBT. HBH-35 works a treat but CK3000 does not bond (XDA thinks it does but there is no handshaking and CK3000 repeats request to bond).
Back to basics again ...
Incidentally, does anyone know if Tobias plans to engineer a way to trigger Voice Command and take input from the car microphone for voice recognition? Would be the dogs and well worth a major donation ....
Cheers
I've had some problems with pocket bluetooth. I have emailed tobias as follows and am awaiting a reply. Was wondering if anyone has faced similar problems:
Tobias,
Thanks for all the hard work in getting these tools working. I have just bought an XDAII with the latest 1.60.00 ROM using the 1.10.00 radio version.
At the same time, I have a WIDCOMM bluetooth dongle on my PC which supports numerous profiles including the headset profile, which allows me to use the PC's speakers and mic as a 'headset' with the XDAII.
I set up the XDAII with the PC, using the built-in bluetooth bonding and pairing application and managed to get it all working fine with the PC using the speakers and the mic as the headset, with the phone automatically transferring the call to the PC when the 'Bluetooth Headset mode is enabled' shows on the today screen. Furthermore, activesync also seems to work fine too.
After installing Pocket Bluetooth Tools, the headset stops working. Before installing it, I unpaired the device by deleting it from the list of paired devices. After installation and going through the process of pairing the device again, it correctly gives me the option to choose the Serial Port, ActiveSync, Modem, and Headset profile. I select all of these and click on OK. Once this happens, my PC gives me a message saying that the XDAII has connected with the headset. However, this doesn’t happen once but goes into a continuous loop giving me notifications every 2-3 seconds that this is the case. Furthermore, when making a call to see if the voice has been transferred to the PC< this stops working and the XDAII's speaker and mic continue to be used. The only way to stop the constant loop of connections is to switch off the bluetooth radio on the XDAII. Furthermore, when deleting the pairing from the XDAII this constant loop continues.
Have you faced this issue previously, as I think it may be a bug. The only reason I installed pocket Bluetooth is that my current b.tooth headset is a Nokia HDW-30 that supports the handsfree profile and your documentation states that Pocket Bluetooth tools supports this profile.
Let me know if there is a fix for this.
pap[/quote]
Why not email the author, he is most helpful.[/quote]
maybe just because he doesn't answer
i wrote a very long report some days after the long awaited new version came out in april, but haven't got any reply. (maybe my email got lost - who knows ...)
i have exactly the same problems. i also have a parrot ck3000 (tried with firmware 3.11 and 3.13) and an mda2 with rom 1.6.00GER and extROM 1.60.07. the two devices pair, and sometime i can even select the "headphone profile" afterwards. i even managed to make it work ONCE, after several hours, of installing, reinstalling, pairing, reparing, ect, ect ...
what did work once was making calls. but after the first call came in, i could answer it, the caller could hear me, but i couldn't hear anything. this happened twice and then i just turned off bt and used the mobile as always.
as i'm using my mda in my car for work and not for fun this is no solution for me . i went back to the original bt stack that works quite well. i can make and take calls w/o any problems.
one thing i'd like to see changed (as soon as parrot and mda work together) is, that ALL calls are made via the handsfree, as, as long i'm in the car it HAVE TO use the handsfree by law (and it's much more comfortable anyway). it's not practicle to dial with the mobile, and then by pressing the green button on the parrot to move the call to the handsfree. but that's the only way you can do it when using speeddial.
another thing i desperately miss is a way to change the volume of the handsfree. i could do this using the volume slider of my nokia 6310, but volume stays all the same when using the mda. and it's just too low when doing higher speeds on the autobahn
of course voice dialing would be a great feature to have ... but it's not that necessary.
please don't get me wrong .. i'm don't want to be ungrateful as i'm not paying for this software - i just want to help ppl by saying that they are not alone with their problem and they should give up wasting their time and better wait for a new release....
and of course i'm very willing to PAY for that software as well as soon as it is any improvement over the original bt stack (for me of course. for most of you it already is)
maybe TOWA could say some words here. that would be really appreciated.
thanks anyway a lot to all ppl that spend their free time developing software and providing it to the comunity!!! thumbs up !
regards ize|man
Bluetooth tools and ROM 1.72
Does ROM version 1.72 require TOWA's bluetooth tools? In this ROM, there are options for COM port selection etc under Bluetooth settings and the clubimate site mentions bluetooth improvements. Anyone with this info?
other com settings then
Inbound COM port com4
outbound COM port com5
??
if so what are they?
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
faisal said:
Rudegar
You are right. Inbound 4, outbound 5. Likely required for GPS devices, if i am not mistaken
Click to expand...
Click to collapse
These are the ports for BT beaming, as I understand! (not for BT GPS).
For BT GPS you do not specifically need BTHTools anymore (since 1.66) because WM can install a BT GPS com at first bonding.
Something is different however (vs BTHTools) since with 1 application (Alturion) I can not get the BT GPS working anymore, which can also not be solved by still installing BTHTools!! (while I have no problems with my other application TT. Figure that out?!)
Ronald
I now have the same problem, the parrot ck3000 was working until I insatlle dthe bluetooth tools, and now it doesn't.
Its a shame I did not see this thread before
Will the 1.72 rom work with both parrot and my emtac bluetooth gps?
Cheers
Justinp
justinp
have you tried uninstalling Bluetoothtools?
no not yet, I might give that a go, but then my gps wont work :?
justinp said:
no not yet, I might give that a go, but then my gps wont work :?
Click to expand...
Click to collapse
I think it will still work!
With my working application (TT3) I see the GPS on COM5 (installed by WM) + on COM7 (installed by BTHTools) + on the BT/SIRF interface!
If I uninstall BTHTools I only loose the selection for COM7. The other two selections still work!
Of course you must have acknowledged the WM com installation with first bonding (in any case for the serial operation)! My BT/SIRF connection always works in TT3 regardless of WM/BTHTools installation of serial ports.
Ronald
I'm also having that strange problem with the parrot CK3000. I did install the previous version of BT but I don't see any difference with or without BT. But when I de-install and want to go back to the original state, the same problem persist. Is there any way to download anyware the original Bluetooth stack without re-install everything (and loosing all my settings and software)?
Thanks for helping out.
Frank.
The Orange SPV M1000, same as a XDAii, does not allow 2 headset profile bluetooth devices to be connected
The phone works fine with my Motorla 810 bluetooth headset.
It will also work fine with the Parrot 3300 to take and make calls, run TomTom3 sat nav and Livewire Speedcare.
The problem is the software on Orange will not allow 2 devices to be paired and stored on the phone which have bluetooth headset profile recognised. When the second device is paired it stops recognisning the headset capabilities of the first device.
Orange do not have a care kit profile for the phone.
This brings significant problems in moving from car to foot as one has to repair the alternative device. All settings and voice commands are then lost for the previous device.
Can anyone direct me to somewhere I can have the O2 software installed or an alternative solution for allowing 2 Bluetooth headset profile devices being paired at one time. Only one device will be connected at a time.
Does the WM 2005 bluetooth work properly with handsfree profile or is it like 2003 and only work with head set profile :?:
Thanks
Jon
Works perfectly with my MR Handsfree headset. Until now I could not get it working in handsfree mode. With WM2005 it is working.
Own an AUDI with the factory installed Bluetooth handsfree kit and I have never been able to pair the XDAii with it so that it works properly - incredibly unstable and never could get to work completely... been lurking this forum and others and tried lots of solutions... upgraded the OS to WM5 today and first time paired and works perfectly - even displays caller ID on the Audi instrumentation!!! Most pleased - now if only I can get the o2 GPRS connection to work
Did notice the following problems with the Bluetooth
- Com ports not recognised - seemed to have something to do with the pairing... simple reset after pairing with Audi would then allow com port assigned to BT GPS (not fully tested yet)
- Multiple pairing - device seems to want to pair more than once not sure about this one but who cares it works now
916senna said:
Does the WM 2005 bluetooth work properly with handsfree profile or is it like 2003 and only work with head set profile :?:
Click to expand...
Click to collapse
I have Ericsson's HBH-65 and WM2005 uses it as Headset only. It doesn't even call-back when I press headset button :-(((((((
Motorola HS-850...
I have a Motorola HS-850 and it works perfectly with WM2005 in Handsfree mode.
Now if I can just get it to voicedial via bluetooth...
Jabra BT250 here and Handsfree works great!!!
WM2005 is the only OS that I have had where my Jabra does what i want it to do.
Craig.
The crux is can you activate your phone through your BT headset to call any number?
No good in a BMW
I loaded 2005 and tried to pair it with my BMW, although the pairing went well and the hands free profile was selected, its no better than Sins 2003 rom.
The microphone in the car doesnt work, the speakers do. The microphone on the phone is the active one. It wont connect a call unless you try twice and you have to answer call twice before they connect.
Bugger
Jon
In the devices list, tap and hold the car kit, and select handsfree, see if this helps.
Voice dialling
The thing I find most surprising with WM2005 (and the previous versions for PPC) is the lack of hands free/car kit voice dialling. That is one thing the P910 has over WM2005 phones that emphasises that full convergence has not happened in the mind of developers... the PPC is a PDA with phone connectivity, whereas the Symbian system has taken the approach that its a phone first and foremost. With the simple addition of hands free voice dialling, WM2005 could be the first really convergent OS.
(I'm kinda hoping someone will say they have a perfect voice-dialling system in place for the XDAII with WM2005, in which case I'll gladly eat my words)
I am still very grateful for ALL those here who have helped deliver three OS upgrades to my XDA in the space of 18 months!!!
Some people are using Microsoft Voice command with Magneto and they reported it to work well.
Cheers
Pat
List of working WM2005 programs:
http://forum.xda-developers.com/viewtopic.php?t=20727
scooter said:
Own an AUDI with the factory installed Bluetooth handsfree kit and I have never been able to pair the XDAii with it so that it works properly - incredibly unstable and never could get to work completely... been lurking this forum and others and tried lots of solutions... upgraded the OS to WM5 today and first time paired and works perfectly - even displays caller ID on the Audi instrumentation!!! Most pleased - now if only I can get the o2 GPRS connection to work
Did notice the following problems with the Bluetooth
- Com ports not recognised - seemed to have something to do with the pairing... simple reset after pairing with Audi would then allow com port assigned to BT GPS (not fully tested yet)
- Multiple pairing - device seems to want to pair more than once not sure about this one but who cares it works now
Click to expand...
Click to collapse
ditto with Merc 2003 E class.
same old problem with handsfree
i also have the Motorolla HS850 and though it did work for a while it seems to be back to mic and speaker working on the device and only speaker on the headset!
so though you can hear the call on the headset the mic dosn't work but the mic on the device is active as is the speaker
has anyone else had this with 2005?
have hard reset and re loaded 2005 but without success
hmm its working again.....
this is wierd!
headset battery was low yesterday so it may be to do with that. will keep checking and see if i can spot a pattern
Hey people,
I tried connecting my Jabra320 up to my Touch HD the other day. The headset should support A2DP for stereo bluetooth, which worked with my old Touch Dual, however, whenever I try adding the headset to my HD I can only see the hands free profile.
Anyone had any problems with A2DP or any ideas how to fix this?
I was thinking about getting a Sony Ericsson headset, but don't want to commit to the investment until I know that I can use the A2DP profile...
I'm using Dutty's v2.5 rom and the v1.12 radio.
Same problem with new duttys roms. It shows me both wireless stereo and handsfree but when i try only to connect A2DP it disconnects. Worked fine on older duttys roms.
I have Jabra 620s
tunppi said:
Same problem with new duttys roms. It shows me both wireless stereo and handsfree but when i try only to connect A2DP it disconnects. Worked fine on older duttys roms.
I have Jabra 620s
Click to expand...
Click to collapse
You're getting a little further than I - I domn't see the 'Wireless Stereo' option at-all. Well I believe Dutty is releasing a new ROM soon. Hopefully it'll be fixed then. If not I'll mention the problem when it comes out - hopefully Dutty or someone will find a fix.
Thanks though for confirming I'm not the only one with this problem!
Hope you guys has fixed your problem. if not, let me tell you how to fix it.
I had the same issue before. now it works.
1. make sure your headset is power off and delete the connection on your cellphone.
2. connect your charger to the headset for 4 seconds, then disconnect it.
3. repeat step2 4 times.
4. after that, your headset will be reset. then, reconnect to your cell phone and you will see wireless stereo function enabled.
What I have discovered on my A2DP headphones (Philips SHB7100) is that when I power them on it will automatically connect but only with wireless headset (phone calls only) functionality.
What I have to do is go to the touchflo settings tab, select Menu> Bluetooth Devices and disconnect then reconnect the headset. Once I do that it connects for both A2DP and phone calls.
I also have a Jabra "Dogtag" headset and it ALWAYS reconnects with both automatically unlike the Philips set, so I suspect this also has something to do with the headset itself and not just the OS/ROM.
Hi!
I've got a Jabra BT3030 headset which works great with the phone and media player in my opinion. It's just that I have problems connecting.
First connection went fine, but when the device already is paired with the phone and I attempt to connect again it fails. I get to input a pin code then (standard should be 0000 according to manual), but it just says failed to connect.
If I unpair and pair them again it works (it doesn't ask for pin then).
Saw a fix on the Sony Ericsson forum where someone had this problem for Xperia, and they posted some cab file (Cyberon_Voice_Speed_Dial_v1.2___BT_Fix.cab), but I'm doubting it's possible to use on my Hero, and if it is, I have no idea how to do that.
Any thoughts?
Thanks.
You can't use any .cab's in android. and i think that fix is a registry fix and android doensn't have a fix.
i also noticed that bluetooth doesn't work without errors i hope that it will be fixed with android 2.0 we have to wait. but i didn't had any problems with my BT headset it also pairs automaticly.
Yeah I thought it wouldn't work... Well hoping for a fix.
Same problem here.
Yes I got the same problem with it not reconnecing. You can get it to work evensually by turn you bluetooth off and on afew time but i find it quicker just to unpair then repair each time. But apart for that, it works and sounds great.
Isn't 1234 the correct standard code ?
Problems with Bluetouth Headset Jabra BT3030
I have the same probleme, for me Jabra BT3030 Headset works wery well with WM 5,and 6 but doesn't works with WM6,1 or WM6,5
Is anyone has a solution or tips.
HTC Touch Cruise (P3650)
WM6,5
Manila 2D v2.0 build 19191432.04
Thanks.
Jabra BT3030 Headset with HTC
Yes, good news for me .
I did finaly fix my bluetouth Jabra BT 3030 with WM6.5 when I upgraded my HTC Touch Cruise from this (Hotfix to enhance the security mechanism of Bluetooth service)
http://www.htc.com/europe/supportdownloadlist.aspx?p_id=59&act=sd&cat=0
Now it works very well., I was a good hotfix for bluetouth
HTC Touch Cruise (P3650)
WM6,5
Manila 2D v2.0 build 19191432.04
Had the same problem with the BT3030 but suddenly it's not doing it anymore!
Just works great!
i bought the same one ... guys how many hours it should take for charge ? also i am very confused with the lights red. yellow n etc etc is there anyone using the same one ?& can give me bit manual how to use it .? would be very grateful..
http://www.jabra.co.uk/sites/Jabra/.../BT3030/Documents/UM/BT3030_UM_UK_EN_3124.pdf
sadape said:
http://www.jabra.co.uk/sites/Jabra/.../BT3030/Documents/UM/BT3030_UM_UK_EN_3124.pdf
Click to expand...
Click to collapse
Thanks Manual is really awesome .. that works
I've also had some strange problems pairing. Try holding the call button in for 6-7 seconds(instead of the 2-3 seconds) till the device shine solid blue and then pair from other device. This is the method I used to pair to the PC. Goodluck