GO HERE
NOT FOR ATOM EXEC NOR HP6800 SERIES.
First of all this ROM is basically an extension over JIGGS AKU 0.7A ROM ..
Thanks to Jiggs (Thanks Mate!), abusalza for his kitchen and all the other community members
This new ROM is much faster than the old one thanks to some more tweaks and newer versions..
The Rom is 6MB PAGEPOOL.... and includes the following.. :-
1. HTC DIALER
2. Total Commander
4. HTC communication manager
5. HTC Action Screen
6. Network wizard
7. WM5torage 1.78
8. HTC keypad , HTC Keyboard(with T9 Input )
9. HTC CUBE , works AGAIN this time FASTER , MORE RESPONSIVE and as before the Installation is SEMI-AUTOMATIC..(Senses left-right movement ,Very similar to the real HTC TOUCH) Thanks to Kona_Mtbkr
11.HTC Audio Manager and the Plugin..
12.FINGER SCROLL CONTACTS , comes pre configured with default softkey etc..(icontacts )
13.Many other Misc. add-ons also included
14.X-Button
15.HTC calculator
16.HTC Windows Media Player SKIN
Removed
1.Photo Editor
The free RAM is about - 20 -22 MB(with cube ,and HTC HOME running)
Free Storage :- 35 Mb.
Known Bugs:-
1.Extended ROM does not get unlocked(looking for a solution)
2.A2DP problems
3.Disabling Or Enabling Home Plugins Requires Soft Boot now..
RAPIDSHARE
4SHARED
INSTALLATION
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable DSUU.EXE
4. Follow on-screen procedure
After installation is complete , on the first boot you will be asked to install programs , please dont skip any one of them as this may result in malfunction .. , and also install 1 ,2 ,3 ,4 ,5 ,6 ,7 .cab files on your phone memory when prompted ..
IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..(sry forgot to edit..)
PLEASE DONT SKIP ANY INSTALLATION..
After all the programs are installed and you have rebooted once ..
Go to Programs MENU and open SIM MANAGER ,copy all your contacts to phone memory .
NOW REBOOT AGAIN..
You might notice bit slowness during first few startup but dont worry ...it will only be for a few seconds after which everything works smoothly..
After this you are all set to go , the left softkey opens up Action Manager which gives you quick access to new messages etc.. , the right key opens up the new contacts application .
A DOWN TO UP MOVEMENT ON THE SCREEN WOULD RESULT IN OPENING OF THE CUBE.
WHEN THE CUBE IS OPENED YOU CAN CLOSE IT BY SNIPPING YOUR FINGER UP TO DOWN.
FURTHER NOTES :-
1. I have also included Flash Video Bundle in an seperate folder when you UNRAR the rom ... you can install it along with TCPMP player(also included.) to view sites like Youtube etc..
2. In the Previous ROM Slide to Unlock was included by default ,this time i have included it as an optional .cab setup so incase you are interested you can simply install it , Note - You don't need to change the skin as thats all preconfigured in a custom CAB
So i am now uploading and the link will be up soon also , will be posting some screenshots..
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
I am currently using, jiggs rom 0.7a. and i'd like to give a try on yours but where can i get that mate? Cpacubo...
Rapidshare mirror is up now..mate..
Please READ THE INSTALLATION INSTRUCTIONS CAREFULLY
MMS problem solved?
Does this ROM solve the MMS problem on the previous version?
In the previous version of this ROM, I am having problems receiving MMS even after I do Auto COnfiguration and a Soft-Reset. I did not have this problem when I was on JIGG's AKU070.
I can't really say...but i think it should..man coz nothing at all related to MMS has been touched from the AKU.7A ..so i guess it will..
Sorry i can not check as i dont hv MMS activated..
hi too all
Great work
Hope in this one UNknown contact problam has been sort out.
good rom.
but i have a few questions.
1. is it compatible with atom life?
2. after updating to this rom. can i still use the wisbar to make my phone look like an iphone?
3. does this rom include touchflo already?
4. if i am on the "iphone" theme of wisbar, can i still use touchflo?
thanks!
@t3dong
1.NO
2.Yes
3.Yes
4.-Dont Know-
Thanks , this one works very well..
Ok, thanks a alot. I've downloaded it and will soon reflash my atom with this one... Can't wait to see the cube on mine..
Remember to read instructions carefully, sorry for repeating again but this is very important..
...IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..
Thaks 4 quick replay mate. I will follow your instructions...
wow awesome! what a good-looking rom. i love it very much. You've done a great job mate... keep up the good work. so far there's no problem with this rom. the cube turn nicely to the left and right. the other htc application are good as well. Oh ya, one thing, after i install Audio Booster, the skin of audio manager return to blue not black anymore but it's functioning well. Once again thank you for giving a new look and life to black atom!
can't seem to make the cube work...also the icontacts show nothing...am I missing something?
Yes , you are ..did you care to read the instructions..........please read them
Icontacts works after you have copied all contacts to phone memory..
As for the cube i would suggest you to read the instructions carefully , install all application..in phone memory..
No need to reflash just to a HARD-BOOT(Power +RESET) and follow instructions..
Hope it works this time
Yeah I read them very much..before running the ROM anyway, I did try to do Hard Reset to redo the installation of the cab files but it always hangs up after the 4.cab installation...I'm doing a reflash of the ROM from bootloader to try..
Thanks responding..will let you know
I reflashed...I don't get it...I get the Quick Launch Soft Key on the left but as per instruction it supposed to be the Action Manager
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
cool!
now u become rom creater. hehe. power!!! must pass down ur skill to me.
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
yup..a few times..also I noticed it hangs so much..it only responds to up and down movements..not the left and to the right...
Related
Hello everyone !
Heres a new rom..
This rom is from taiwan made by Youzii.
- Build 18125
- No Cube, but TouchFLO and Touch Comm manager
- Including some tools and apps (Pocket RAR, psshutxp, pbar, and more!)
- Very stable and fast !
- Page Pool is 6 MB !
NOTE !
I have just updated this version and it works very well, BUT you might use the NVID WM5 rom before you flash this one, NOT the one which is included.. That made my phone start to boot loader..
Download Link:
Here
I have changed the files a little so they now look more like the ones we are used to..
http://da9l.4shared.com/
1. Under the EVO7 folder download both EVO7.part1.rar and EVO7.part2.rar
2. Begin with the extraction of part 1.. Run the exe thats the right for you
3. Now after flashing is done remain the pda unused and extract EVO7.part2.rar
4. Run Upgrade_Rom.bat and wait for its completion. Do as the utility tells you to
5. And now the rom should be installed !
Pictures in the bottom if the thread!
Thank You For ROM
All is OK
The page pool is 6mb.
Thank you ! will update it !
Thank you for sharing, Da9L!!
As in EVO7tw, Cube and HTCHome can be installed in EVO7en indepandantly with removable cab files later.^^
Visit http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en to download the long-waited Cube and HTCHome cabs now!!
Thank Support for the mirrors:
http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
-------------------------------------------------------------------
How to falsh your device to EVO7：
-------------------------------------------------------------------
1.Flash PV_TEMP (download PV_Temp http://tom-love.net/Rom/Prophet/WM6....et_PV_Temp.zip )
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
-------------------------------------------------------------------
Wanna try EVO7tw (with removable Cube and HTCHome)?? Here is the link to the original thread:
http://www.mobile01.com/topicdetail.php?f=224&t=385791&last=3478621
Tips: ---------------------------------------------------------------------
1. The default region is Taiwan which can be changed at "Start\Settings\System\Regional Settings\Region.
2. Support Far-East characters including troditional Chinese, simplified Chinese, Japanese, and Korea, etc,. To display the characters properly please set the region accordingly at the same path above.
3. It's strongly recommanded to update the new version of G4 SIP Tweak, a third party application incorporated in EVO7en, for a better dispaly to the app.
4. The blue lines on the uppermost screen is an application to show battery and memory status on the left and right part respectively. Disable it by deleting pwrstat.lnk at the folder of Windows\Startup if it is not right to your eye^^|||
5. If you prefer the original contacts, disable the built-in PocketCM by assing the right soft-button to Contacts with Soft Key at Start\Settings\System.
6. No higher than 264MHz over-clock is recommanded for stability, though 274MHz works fine for some devices.
7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)
8. Button 4 is yet to assign. Do it with Buttons at Start\Settings.
9. Edit the values of registry as below to modify the sensitivity of Touchflo (finger scrolling):
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings "SpeedHigh" (20 is recommanded) and "SpeedLow" (65 is recommanded).
10. To edit registry, you may like to run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
11. X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4. (my case is that there are always 20M or so left no matter how long the device runs)
12. For whom like to read Thai characters properly, please visit the EVO7en link to download EVO extFont.cab
13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).
Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.
OriginalIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48906&d=1188663728
PhonIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48907&d=1188663758
AdditionalDll >> http://forum.xda-developers.com/attachment.php?attachmentid=48908&d=1188663783
AllChiIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48909&d=1188663798
14. To get Chinese lunar calendar, change the value of the Dword, "ShowLunarCalendar", under "HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar" from "0" to "1"
15. The letters chopped on the setting pages can be sloved by editing the registry as below: (Note: not for Chinese users)
[HKEY_LOCAL_MACHINE\nls] "SystemLCID"=dword:404 << change dword from 404 to 409
16. Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.
http://forum.xda-developers.com/attachment.php?attachmentid=49966&d=1189363816
17. For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.
http://forum.xda-developers.com/attachment.php?attachmentid=49970&d=1189364038
18. Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)
--------------------------------------------------------------------------
Note: The Evo7 series supports devices listed as below:
* SPV M600
* Qtek S200
* i-mate JAMin
* Dopod 818 Pro
* Dopod 830
* XDA neo (O2 Germany)
* VPA Compact S (Vodafone Germany)
* TC 500 (T-Home Germany)
evo7 EN .....
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
dioxda2 said:
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
Click to expand...
Click to collapse
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
iiiox said:
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
Click to expand...
Click to collapse
Dear iiiox,
noted, set, enjoying now!! ^_^
Thai font display incorrect
Thai font cannot display on today screen, how can I solve this problem?
I already change regional setting to "Thai".
thanks
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
G4 SIP Tweak.cab
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
tb146 said:
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
Click to expand...
Click to collapse
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
mark_vip said:
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
Click to expand...
Click to collapse
Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.
How to falsh your device to EVO7：
1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
iiiox said:
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Click to expand...
Click to collapse
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
fungsaikit said:
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
Click to expand...
Click to collapse
Haha!! Brother fungsaikit, I'm here only because Youzii's out of sight at the time being^^" You know that I can solve few [email protected][email protected] Only if Youzii ansers calls in person here....
BTW, why don't you try EVO7en^^?? It's even faster (though fewer applications like removable HTCHome and Cube at this moment^^)
Hi, please follow the following steps:
1. Flash the PV Temp Rom;
2. Install the Cert_SPCS cab to your device;
3. Install the EnableRapi cab to your device;
4. Double the file name EVO7.1 Part 1;
5. Choose 3 on the cmd screen;
6. Wait 20 minutes at least;
7. Disconnect the USB;
8. Press the soft-reset button on the bottom. Then press the camera button and command manager button simutaneously. When you see a few lines of words on the black screen, press the phone-calling button. You will see "FAT Format is completed".
9. Enjoy!
tb146 said:
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
Click to expand...
Click to collapse
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Hehehe, I am a bit lazy recently. Maybe because I flashed my 818 Pro at least 3 to 4 times a day before. Now the EVO7.1 is really fantastic. It is very stable and fast. The new method of calling out the cube can't be better in elsewhere. Also, I am playing with my new BT headset Sony HBH-DS220 these 2 days. Hehehe.... forgive me being a bit lazy to flash new ROM.
iiiox said:
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Click to expand...
Click to collapse
So sorry, cannot wait to flash so i miss to read it.
Thank you guys....
This program is for those of you looking for HTC Cube program which -
1) Runs on O2 ATOM
2) Which works fully without using FlashLite or FlashPlayer
3) Which is low in memory requirement and does not increase battery consumption.
4) Has a Contact page on cube that is fully working and integrates with HTC Home plugin
5) Which is tested on ATOM and is considered relatively 'stable' code
THIS IS ONLY TESTED ON O2 ATOM
NOTE: All other PDAs can try but please test it at your own risk and feedback if it works for you.
HTC Touch Cube working on O2 ATOM(WM6 AKU0.7.0)!
================================================================================
LATEST UPDATE - NOV 18th 2007
+++++++++++++
Touchflo Alpha 2
+++++++++++++
PRE-REQUISITE: This program needs HTC Home Plugin, HTC Music Plugin, and HTC AudioManager to be fully integrated.
The latest Alpha 2 cab file is downloadable now!
(See one of the attachments here labelled - Touchflo alpha 2.zip)
Instructions
1) Install this cab file
2) Delete APL, Biotouch, and HUB from the /Windows/Startup first to avoid black screen problem.
3) Soft-reset
Features in this cab file -
1) Finger activation of cube
2) Efrost's 'activation icon' at the top bar is no longer visible.
3) All efrost's finger scrolling features available and functioning.
FOOTNOTE:
1) You must uninstall the old version of this cab first. Then soft-reset before installing this one.
2) This cab does not include Touch Settings - for this feature, you can still download the Touch Settings V1.22.cab attached below.
3) You can ignore all the other archive information below to avoid confusing yourself!
4) You can ask for help in this thread but don't expect me to help you troubleshoot unless you're using an O2 ATOM!
5) Please share your ideas and findings here on how to improve it further.
=====================================================================================
TO GET FULL CONTROL MOVEMENT OF CUBE
THIS CUBE WILL NOT BE COMPLETE WITHOUT MENTIONING THE BREAKTHROUGH THAT KONA MADE FOR THE HTC CUBE ON NON-TOUCH DEVICES LIKE THE O2 ATOM. THANKS KONA AND GANG FOR DOING THIS!
To learn more, visit Kona's thread here: http://forum.xda-developers.com/showthread.php?t=343583.
NOTE: Kindly donate(any amount, no matter how small) to these WONDERFUL DEVELOPERS who solve so many problems for us in O2 ATOM!!!
=====================================================================================
ARCHIVE INFO - from previous postings.
Hi guys,
I've managed to get the HTC Touch Cube working with jiggs's WM6 AKU 0.7.0. Not sure if anyone was previously successful in doing this. But unfortunately, at the moment, it is using the ButtonFlo method of turning the cube.
I dont have the expertise to get this thing working using the Finger or stylus to get the touchscreen to turn the cube yet.
Maybe one of you geniuses out there will be able to take this one step further and get it working fully! (I'm hoping)
To get the HTC Cube working with finger touch-screen capability (using eFrost's FTouchFlo) - just follow the steps in post #150 - http://forum.xda-developers.com/showpost.php?p=1598731&postcount=150
The files needed for this installation is also located in this post.
============================
ALTERNATIVE INSTALLATION METHOD
============================
ALTERNATIVELY, if you want to configure using the long-way; and using the attachments below, please follow the steps listed here:-
INSTALLATION STEPS -
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
PART 2 - Customizing Your Cube using Touch Settings!
Step 1: Install Touch settings V1.22.cab, then soft reset.
Step 2: Go to windows\startup and delete file called "Mediahubmini"
Step 3: Soft reset (I don't think it's neccesary though, but i do perform
this step.
Step 4: OH YES! Also install the missing ICON files for the APLauncher - AL_xx_Touch.zip into a separate directory (eg. \Touch).
Step 5: Copy the same ICON files(from Step4) into \Windows. (these files were missing in Part1).
Step6 - Soft-reset and you should see everything working!
CHECKLIST ON HOW TO AVOID BLACKSCREEN AFTER YOU INSTALL THIS APPS
1) Make sure that you have HTC Home, HTC Audio Mgr & Plugin installed and activated in Today settings.
2) Make sure you install all the missing AP_xx_Touch.zip ICON files.
3) If you have Touch Settings program installed -
a) Make sure you DELETE MediaHubMini.lnk from \Windows\Startup &
b) Start Touch Settings and click SAVE to save the settings once after missing icons are installed.
Once you have Steps 1-3 done properly, just do a SOFT-RESET and the cube should be working.
NOTE: Below is a photo of Touch Settings V1.22.
( and here's the official link from the author - http://ww2.fatattitude.com/software/software-item.aspx?appid=10 )
If you're happy with his work, you can buy him a beer - http://www.fatattitude.com/buybeer)
Additional info available here - http://forum.xda-developers.com/showthread.php?t=324556
(Pls note that this is still in Alpha testing stage so install at your own risk)
ADDENDUM - (POSTED on OCT 16, 2007)
TOUCHSCREEN ACTIVATION FOR TOUCH CUBE
Thanks to efrost's FTouchFlo (Alpha 3 version) with application launcher function, I can now use my finger to 'activate' the cube without using button!
For efrost's program FTouchFlo, please refer to his posting and donate if you're happy with his contribution! Here's the link - http://forum.xda-developers.com/showthread.php?t=334965
Pre-requisite - you MUST have a working Touch Cube on yr ATOM.
Step 1 - Install efrost's FTouchFlo ( and follow his instructions to calibrate and then try making sure u can scroll).
Step 2 - Replace the default FTouchflo config file under /Program Files/FTouchFlo_a3/FTouchFloConfig.txt with the one I've posted here.
Step 3 - Restart FTouchFlo - under Programs, select Start FTouchFlo and then u try to test the scrolling.
Step 4 - You're ready to test the activation -
a) You must first put Ftouchflo into launcher mode (IMPORTANT STEP) - swipe your finger from down-to-up-and-down again in one swift motion. (you will hear a *beep* on your PDA to let you know that you've toggled into launcher mode.
b) Just swipe your finger from LEFT to RIGHT and then it will automatically launch the cube on your screen!
Step 5 - Once the cube is on yr screen, you can then continue to swipe from LEFT to RIGHT and be able to turn the cube.
TO ENSURE RESPONSIVENESS IN YOUR DEVICE
To ensure responsiveness in your device, do not specify too many applications to launch using gestures - I've modified FTouchFloConfig.txt to only launch the cube.
The touchscreen functionality for this Touch cube will improve as efrost improves his program!
Thanks efrost!
(Pls note that this is still in Alpha testing stage so install at your own risk)
NOTE: NO OFFICIAL SUPPORT IS PROVIDED FOR ANY OF THESE SOFTWARE POSTED HERE!
That good news if it can work. Will try it out when i'm free.
http://forum.xda-developers.com/showthread.php?t=333163
this is the one ur asking right? same touchflo? the author of that program is on that thread. He visited there & u may ask some question to him.
Hi mikewtw. May i know the installation steps?
wonder12 said:
Hi mikewtw. May i know the installation steps?
Click to expand...
Click to collapse
please try to read http://forum.xda-developers.com/showthread.php?t=328010 i never try to me also..
Installation steps I used to get Touch Cube working.
Here are the steps I used:-
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
Everything should work beautifully when you press the button for the old O2 Media Plus ( which has now been mapped to Touch Flo program).
Everything in the Touch Flo Cube should work.
And I believe there's also a Touch Flo Cube Customizer program available. I will try to repost it here if I find it working well.
I'm hoping someone will get the touchscreen interface working so that we can swipe and activate the cube using our fingers or stylus! Thats what I'm waiting for!
The ultimate "O2 Touch" is coming!
Mike
I will stick with my Iphone look O2 Atom, much cooler must say
Phone goes missing / Touch Settings V1.22 not working on this Touch Cube yet.
PROBLEM #1
I notice that my Phone button is missing from the HTC Home Plugin after I installed this Touch Cube. So instead of 6 buttons on the Home Plugin, I'm only left with 5 button!
Luckily the Touch Cube (using buttonflo) works and I can put my 9 favorite contacts in the contact page on the cube
When I reinstall Home Plugin again and reset, the 6buttons comes back, but my Touch Cube blanks out Then when I reinstall Touch Cube again, my Home Plugin is missing the Phone button...Oh well...
PROBLEM#2
Also, when I install Touch Settings V1.22, my Touch Cube blanks out when I try to launch it.
Tried installing Touch Settings before Touch Cube and vice-versa, but that didnt help either
If anyone can get Touch Settings V1.22 working with this Touch Cube, please post your files and installation instructions. THanks.
this touchflo is still on demo version, alot of programs have conflict here.
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Ultimate Chicken said:
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Click to expand...
Click to collapse
You must have HTC Audio Mgr and HTC Audio Mgr Plugin installed and also HTC Home Plugin running first.
Then install Touch Flo(alpha).cab and lastly the JTButtonFlo.cab file. Map a O2 Atom button to Touch Flo and then do a soft-reset.
After that, it should work.
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Ultimate Chicken said:
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Click to expand...
Click to collapse
the CREATOR IF THIS program is BYKA.. he is on this thread
Try this in your ATOM..Touchflo...
http://forum.xda-developers.com/showthread.php?t=333163
Byka's Cool Touchflo 3D Cube
http://forum.xda-developers.com/showthread.php?t=328010
try to ask question on that thread..
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Ultimate Chicken said:
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Click to expand...
Click to collapse
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
gives black screen , will wait for touchflo rom ,if it is possible
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
Click to expand...
Click to collapse
I can't, because it blackscreens my device. <.<
I'll try again when I get home, tho, but don't expect a miracle. This needs to be worked on.
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Exellent
jiggs said:
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Click to expand...
Click to collapse
I can smell TouchFlo on our MightY AtoM soon
NOT FOR ATOM EXEC NOR HP6800 SERIES.
First of all this ROM is basically an extension over JIGGS AKU 0.7 ROM ..
Thanks to Jiggs() , medkid(wonderful tutorial) , Garmin (Thanks Mate!), abusalza for his kitchen and all the other community members
The Rom is 6MB PAGEPOOL.... and includes the following.. :-
1. HTC DIALER (comes pre-installed)
2. Total Commander
4. HTC communication manager(thanks ckaidi)
5. S2U2 (Thanks A_C ,Comes with Custom HTC theme again pre-installed)
6. Network wizard
7. WM5torage 1.78 beta 2
8. HTC keypad , HTC Keyboard(with T9 Input )
9. Some registry tweaks(basically copied from ckaidi's ROM )
10.Ok , now the BIGDEAL , as soon as you are over with installing all the Apps included in the ROM , THE HTC CUBE WORKS (WITH FINGER ACTIVATION ,NO NEED TO DELETE STARTUP ITEMS OR ANYTHING)
11.HTC Audio Manager and the Plugin..
12.FINGER SCROLL CONTACTS , comes pre configured with default softkey etc..(icontacts )
13.Many other Misc. add-ons also included[/SIZE]
So Basically it has all the things based on HTC TOUCH available for our atom
As you know this is MY FIRST ROM , i ll be very glad if some of you do go ahead and try it out and let me know how it goes...
The free RAM is about - 20 -22 MB(with cube , S2U2 , and HTC HOME running)
Free Storage :- 35 Mb.
Download Link :-
Rapidshare
Megaupload
4Shared
Now to installation part -
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable ATOMWM607...EXE
4. Follow on-screen procedure
After installation is complete , on the first boot you will be asked to install programs , please dont skip any one of them as this may result in malfunction .. , and also install 1 , 2, 4 .cab files on your phone memory when prompted
After all the programs are installed and you have rebooted once ..
Go to Programs MENU and open SIM MANAGER ,copy all your contacts to phone memory .
NOW REBOOT AGAIN..
After this you are all set to go , the left softkey opens up communication manager , the right key opens up the new contacts application .
A LEFT TO RIGHT MOVEMENT ON THE SCREEN WOULD RESULT IN OPENING OF THE CUBE.
Further Advice :-
1. After installing go to today > plugins and disable wireless..
2. Go to Programs > Accesories > IM SELECTOR and choose the keyboard of your choice..
3. I have also included Flash Video Bundle in an seperate folder when you UNRAR the rom ... you can install it along with TCPMP player to view sites like Youtube etc..
So i am now uploading and the link will be up soon also , will be posting some screenshots..
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
OK , here's something OT , i have rar'd some themes download here
Congratulations,Udayrulz!
I hope you can upload it to other sites as a lot of us are having trouble downloading with rapidshare.
WoW udayrulz just installed works great mate
Great to hear guys , @Bryan did u manage to install it mate so howz it
@Rhinayon - Mate a new Megaupload mirror will be available within 30 minutes
udayrulz said:
Great to hear guys , @Bryan did u manage to install it mate so howz it
@Rhinayon - Mate a new Megaupload mirror will be available within 30 minutes
Click to expand...
Click to collapse
THNKS 4 UR eford
CAN U provide another mirror
4shared >> eg.
http://www.4shared.com/
or , MediaFire
http://www.mediafire.com/index.php
I REALY app.
Will megaupload do?? ,just finished with it CHECK FIRST POST FOR THE LINK
udayrulz said:
Will megaupload do?? ,just finished with it CHECK FIRST POST FOR THE LINK
Click to expand...
Click to collapse
NO >> megaupload can not
Then you will have to wait around 25 minutes , as i am loading to 4shared
udayrulz said:
Then you will have to wait around 25 minutes , as i am loading to 4shared
Click to expand...
Click to collapse
OK
thnks
Link Added
udayrulz said:
Link Added
Click to expand...
Click to collapse
1,000,000 THNKS
Hey there, thanks for the rom!
I'm having trouble and keep on getting "Connection Error" after running DSUU under "MN2 Bootloader"?
I flashed my ATOM to Atom Exec (Xda-Atom-Exec-ENG-20060721-MOT0822), is this the problem??
Thanks guys!
Disable Wireless?!
udayrulz, you did a good job on this, but what did you mean by disable wireless plugin? so we can't use Wifi wish this room? Anyway, I'm downloading and will let you know if something wrong
And... Thanks alot for the room, this is what I have been waiting for
Y does the file name says 8PP wherein you stated in the first page is 6pp? please advise?
a very good effort!!
For me Im still waiting for Jiggs to finish up the Cert issues before i cook a ROM for you guys
But no hurry to Jiggs, Im very very grateful to this wm6 aku0.7a already!!
Love this forum manz, where so many bros CARING AND SHARING!!! yeah!!
>.< great job =) but i have a dumb qns i dont seems to be able to bring up the htc cube haha any words of advise lol
Pagepool
what is ment by pagepool and what is the use of it.
@icecool -- Mate , have you installed all the Cabs??(1 , 2 , 4 from extended ROM) on your phone memory , if so please try and use your stylus and move it from left to right in middle of the screen , that will activate the CUBE
@Brian -- Its a Naming Error , my bad
jackkkkk said:
Hey there, thanks for the rom!
I'm having trouble and keep on getting "Connection Error" after running DSUU under "MN2 Bootloader"?
I flashed my ATOM to Atom Exec (Xda-Atom-Exec-ENG-20060721-MOT0822), is this the problem??
Thanks guys!
Click to expand...
Click to collapse
You have done a blunder mate , please never flash an ATOM EXEC ROM on your ATOM as this will cause the Bootloader to malfunction ..
However a fix for this is available -- Check out the ATOM WIKI page - The Fix is somewhere there
PM me if you have problems
ronalddo said:
udayrulz, you did a good job on this, but what did you mean by disable wireless plugin? so we can't use Wifi wish this room? Anyway, I'm downloading and will let you know if something wrong
And... Thanks alot for the room, this is what I have been waiting for
Click to expand...
Click to collapse
OH , no i just meant to disable the plugin from you today screen as the left softkey now opens up the new communication manager
Simple steps on howto
1. download the kitchen Download
2. download Prophet Touch X rom Get it here
3. extract Kitchen and Prophet Touch X to separate folder
4. Place the OS.nb from Prophet Touch X in the rom folder of the Kitchen
5. run Buildos.exe and choose what to include (the marked apps are the once that are in Prophet Touch X) press the green play button and wait for it to finish
6. run CreateROM.bat (if there is any error the you have included to much in the Buldos prosess)
7. if there were no error the new OS.nb is in the temp folder move it to the Prophet Touch X folder and overwrite the os.nb in it
8. flash any step 1 WM5
9. now Flash your new rom within Prophet Touch X folder
if everything is done right you should have your new coocked rom on your Prophet
I have put all the things that should not be removed into the SYS folder so do only make changes to the OEM folder till you know more about cooking .
replace the HTC Audio Manager with this one
View attachment OEMAudioManager.zip
New HTC Album with folder option
View attachment HTCAlbumFolderOption.zip
Extras and links
I'll upload some addons for the kitchen later on as I've made more OEM packs
You can also search for oempacks to include but be aware that some OEM packs are device depented
Some cool tools that I use but have not included in kitchen You'll need to understand what they do before using them
HyperCore Kitchen cool for dumping roms and building ( I use it for dumping)
this is great.. awesome.
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
geney said:
Great job Gullum. Now guys, we all should start frying Hokienmee or Char Kueh Teow (both chinese cuisine)
Click to expand...
Click to collapse
I like both of them..LOL..
Really love this kitchen...
Thanks man, you are great!!!
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
geney said:
It'll be even better if have a list of what those things really for. I do not know which box to check and which one is not
Maybe I'm too new for 'cooking'
Click to expand...
Click to collapse
hold the mouse over one of the options and there should show and explaination for most of the items
good news
i'll try it
for every change in X and flashing it, is it always necessary to do step 1 again (wm5 flashing) ?
When I do hard reset and at the "tap screen to go on" point, I could start flashing X too ?
What I mean, is the complete rom exchanged when I flash X, or do some parts from wm5 or old X (IX, VIII ....) remain ?
I've try to cook today.. BUt seems something is going wrong...
Better I flashed it back to the original touch X ROM...
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
mcupurdija said:
I also had some bad luck with cooking.
I did everything gullum said, flashed 'new' TouchX, did hard reset and then when its time to see welcome screen and 'press any key.....' there is blank white screen! Nothing happens no matter which button i press! Any ideas?
Click to expand...
Click to collapse
I did the same think.
At my case, i have enter today screen.. But I think, its programs don't install clearly.. (hard reset don't help either.)
The first screen is the same one as you.. The white one.. Maybe you should to try ask Gullum again..
I just flash back to Touch IX with another Ext ROM. QuickMenu in that ext.ROM
thanks gullum
I would like to translate this rom to Portuguese can you give some advices? our some tutorial to do that, please? can i do that with this soft?
best regards
thanks (for this perfect kitchen) gullum ,some 3 questions i have :
1.>how to get oem or make one ,and
2.>how to get .dsm , .rgu files of my favorite software . and
3.>how do i make registry changes prior to build os are they automatic
Note :ext_rom files attributes should be read only since its like that in original rom so i made them read only(i think its healthy for system files any virus won't be able to modify it unless the file needs to be appendable updateable it should be read only),plus i deleted alot of thumbs.db files lying in many folders (about >2mb) just to clean oem folder files off thumbs.db i know winxp might be making them all the way .
i corrected audio manger with this kitchen (its gr8),i can't seem to solve camera album (have solved solution given below )problem ,it seems to have come back you know i can't use gestures , what to do ,any reg setting solution.
Edit : **corrected** the setting in reg hklm\software\htc\htcalbum\cacheserial to 2130706432
and hklm\software\htc\htcalbum\default_viewer to 0
if it still don't get solved set first 11 enteries (h_enable to v_pos) value to 0 in
hklm\software\htc\htcalbum\touchscroll\htcalbumclass
i'll try to provide a cab but this forum has alot of intelligent members
BuildImgfs
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
ma3ayta said:
whatever I include in the buildos I am facing the same error when I try to create rom; something about BuildImgfs
any help guys!!
Click to expand...
Click to collapse
2 reasons 1.> i hope you are pressing play(top left in build OS)button after whatever you choose,with what ever you want in it.
2.>your file size has to be limited its almost full with this kitchen so you have to remove some item like voice dialing (which i seldom use) or some other item removed before you add some item since size dependency is very important here ,and later run create rom .remember you cannot select everything because of space limitation .
Hello Gullum
I'm trying to do very basic thing adding Windows Live package into the OS.nb but it fails during CreatROM.bat. At BuildImgfs.exe the application BuildImgfs.exe crashes and show the error message and whether to send a report to MS or not (I don't send...).
I just directly add Windows Live to your OS.nb. Is it already fully loaded? Should I remove something before?
question with task manager
something is wrong with task manager.
in control panel ,its setting doesn't work!
Same problem.
Whatever i select in buildOS, BuildImgfs crashes.
Last records is CreateROM.bat window is:
Processing "Painting.gif" as file
Processing "S5K3BAFX.dll" as file
Processing "3aca900a-0834-11dc-8314-0800200c9a66.dsm" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.rgu" as file
Processing "c7dbe475-1d17-4fbf-a63e-af6dc042569a.dsm" as file
Processing "-жE+-A+?.txt" as file
I think reason in strange file name -жE+-A+?.txt.
BINGO!!!
I Found this file in Prophet Touch kitchen.
\\OEM\Quickmenu\-жE+-A+?.txt
Just delete it before kitching.
READ THIS FIRST
Finally Working Bluetooth problem
For ATOM/ATOM PURE ONLY
Download link moved to post #2
Step by step upgrading
NOTE: These steps only apply if you have an ATOM/ATOM Pure.
Basically, there are three steps to flash a custom ROM to your ATOM.
1. Choose and download your choice of custom ROMs
2. Flash the custom ROM to your Atom using the Device Software Update Utility (DSSU)
3. Flash the custom ROM using MiniSD
Preparation
Backup your personal information using a program such as PIM Backup (freeware). Also make sure your phone has at least a 50% charge. You need M$ ActiveSync 4.5 for XP or Windows Mobile Device Center for VISTA and 7 to upgrade your device through PC.
Please read through this guide and download the all the necessary files beforehand. That way, you know exactly what you're getting into.
Choose and download your custom ROM
There are many, many custom ROMs out there for the Atom.
Look through the threads and find a ROM that you like. Custom ROMs differ in their preinstalled software, system settings, performance tweaks, and more.
ROMs usually come compressed in a .zip file. Extract the downloaded ROM file to somewhere on your hard drive temporarily in preparation for the next step.
Flash Custom ROM Using DSSU
Copy the custom ROM file (usually came with 6 files) to C:\WINDOWS\Temp folder you just extracted.
Once you've got everything hooked up correctly, run the Device Software Update Utility (DSSU).exe program inside of the C:\WINDOWS\Temp folder you just copied. Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
In case you can't update the ATOM in active mode, you may need to update by entering bootloader mode. Hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. Then connect your phone via USB cable to your computer.
Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
Flash Custom ROM Using MiniSD
*Not recommended
Here's the step how to flash your Atom using MiniSD.
1. Extract downloaded custom ROM to somewhere on your harddrive.
2. Cut first 12byte header of diskimage_Ver.nb0 using hex editor.
3. Rename diskimage_Ver.nb0 to diskimg.nb0
4. Rename ExtendedROM.img to extended.img
4. Copy both files diskimg.nb0 and extended.img to your miniSD
Now, hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. The Atom will flash the new ROM automaically. Once it done, setup the device and enjoy the new custom ROM.
Big thanks to HelloWorld, [email protected], Tj's and all atom tester...
WM6.5
Build 28205
Mediafire Clean-New UI 04/23/2010
Build 21895
Mediafire Clean 04/15/2010
Mediafire Neo Shadow 04/15/2010
Build 23016
Mediafire Clean 02/15/2010
Mediafire Neo Shadow (Bluetooth not Working) 02/12/2010
WM6.1 latest WM6.1 Core OS
Build 21056
Mediafire Clean 03/08/2010
4Shared Mirror, thanks to Vincentshjuan
Build 21054
Mediafire Clean 02/19/2010
Upgrade instruction:
Download and execute downloaded file, if something goes wrong, extract it and copy all files to C:\Windows\temp.
If you already running wm61 or wm65 go for OS+ExtendedROM, for wm5 user go for ALL option.
Not expected for DONATION, but always appreciated it.
Thanks Glossy.....wow first one in line..........
Downloading now and will flash it later.....will update you from the try outs.
Good work though!
I'm wondering and really hope if this is very CLEAN, FAST & STABLE WM6.5 ROM in LOW BATTERY CONSUMPTIONS for O2 XDA Atom. Thanks before GlossyX1, you're the Atom ROM masterpiece too!
Wow! Great!
Thank you for this new build. Will try soon...
Have a try and gimme some report...
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
vincentshjuan said:
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
Click to expand...
Click to collapse
What do you mean by unlock the EXTENDEDRom? I use this ROM for several days and found no problem on my device. Now I uninstalled PersianBluetooth to save more memory.
Did you found another issue? Has anyone else try this ROM?
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
cwiggler said:
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
Click to expand...
Click to collapse
Waiting for your feed. I'm not tested yed to install SPB mobile, but there's no issue when I install another cab application. You have to try it by your self and give us a report. ATOM is QVGA device. thanks
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Add application
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
I mean WM6.5(this ROM)....
vincentshjuan said:
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Click to expand...
Click to collapse
I see, you can't unlock the EXTRom as it is configured automatically in a file named config.txt. So, every chef has configured it depend on what it is configured in config.txt to EXTRom. Another thing, don't ever use other EXTrom but what is it included on ROM package, it wont work.
For the Ring mode, I can set it as usual in ring mode. Just go to setting->sound and notification->incoming call. Not working??? Try this, set to ring and vibrate, restart and set to ring.
Bluetooth??? Need some magic
I just tried to install SPB 3.5 and it works as well
vincentshjuan said:
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
Click to expand...
Click to collapse
No you cant, while run standalone application (.exe) you wont see any shorcut because it not registered to registry and doesn't have any shortcut (lnk). You can try to build CAB file and set all shortcut in (initflash.txt) for eq to put TorchLight.exe then write it down Directory("\Windows\Start Menu\Programs\"):-File("Torch.lnk","\Windows\TorchLight.lnk"), it will show Torch on Start Menu->Programs
Try this to make a CAB file http://forum.xda-developers.com/showthread.php?t=400221
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
So bluetooth handfree is not working again
vincentshjuan said:
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
Click to expand...
Click to collapse
Thanks, glad to hear you'd loved the ROM.
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
cwiggler said:
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
Click to expand...
Click to collapse
It usual happen while atom run out of memory. My ROM preinstalled with PersianBluetooth, when you try to install custom home screen eq SPB then your screen goes white. Here is a tip for you: Try to remove PersianBlue and see what happen. I'm not recommended to use any custom Home Today screen because WM6.5 use more resource than you can expected.
dragon man said:
So bluetooth handfree is not working again
Click to expand...
Click to collapse
I don't have any bluetooth device, test it by your self and give me feedback.
Cheers...
Dragon,
Bluetooth handsfree is fine, working. Only issue is choose your bluetooth devie wisely as you can only add 2 bluetooth device only at the moment. So for me, luckily 2 is just enough, one for activesync and one for handfree(bluetooth). The reason is after you added the 2nd bluetooth device, you can't see add new device tap anymore.
Good luck....