This program is for those of you looking for HTC Cube program which -
1) Runs on O2 ATOM
2) Which works fully without using FlashLite or FlashPlayer
3) Which is low in memory requirement and does not increase battery consumption.
4) Has a Contact page on cube that is fully working and integrates with HTC Home plugin
5) Which is tested on ATOM and is considered relatively 'stable' code
THIS IS ONLY TESTED ON O2 ATOM
NOTE: All other PDAs can try but please test it at your own risk and feedback if it works for you.
HTC Touch Cube working on O2 ATOM(WM6 AKU0.7.0)!
================================================================================
LATEST UPDATE - NOV 18th 2007
+++++++++++++
Touchflo Alpha 2
+++++++++++++
PRE-REQUISITE: This program needs HTC Home Plugin, HTC Music Plugin, and HTC AudioManager to be fully integrated.
The latest Alpha 2 cab file is downloadable now!
(See one of the attachments here labelled - Touchflo alpha 2.zip)
Instructions
1) Install this cab file
2) Delete APL, Biotouch, and HUB from the /Windows/Startup first to avoid black screen problem.
3) Soft-reset
Features in this cab file -
1) Finger activation of cube
2) Efrost's 'activation icon' at the top bar is no longer visible.
3) All efrost's finger scrolling features available and functioning.
FOOTNOTE:
1) You must uninstall the old version of this cab first. Then soft-reset before installing this one.
2) This cab does not include Touch Settings - for this feature, you can still download the Touch Settings V1.22.cab attached below.
3) You can ignore all the other archive information below to avoid confusing yourself!
4) You can ask for help in this thread but don't expect me to help you troubleshoot unless you're using an O2 ATOM!
5) Please share your ideas and findings here on how to improve it further.
=====================================================================================
TO GET FULL CONTROL MOVEMENT OF CUBE
THIS CUBE WILL NOT BE COMPLETE WITHOUT MENTIONING THE BREAKTHROUGH THAT KONA MADE FOR THE HTC CUBE ON NON-TOUCH DEVICES LIKE THE O2 ATOM. THANKS KONA AND GANG FOR DOING THIS!
To learn more, visit Kona's thread here: http://forum.xda-developers.com/showthread.php?t=343583.
NOTE: Kindly donate(any amount, no matter how small) to these WONDERFUL DEVELOPERS who solve so many problems for us in O2 ATOM!!!
=====================================================================================
ARCHIVE INFO - from previous postings.
Hi guys,
I've managed to get the HTC Touch Cube working with jiggs's WM6 AKU 0.7.0. Not sure if anyone was previously successful in doing this. But unfortunately, at the moment, it is using the ButtonFlo method of turning the cube.
I dont have the expertise to get this thing working using the Finger or stylus to get the touchscreen to turn the cube yet.
Maybe one of you geniuses out there will be able to take this one step further and get it working fully! (I'm hoping)
To get the HTC Cube working with finger touch-screen capability (using eFrost's FTouchFlo) - just follow the steps in post #150 - http://forum.xda-developers.com/showpost.php?p=1598731&postcount=150
The files needed for this installation is also located in this post.
============================
ALTERNATIVE INSTALLATION METHOD
============================
ALTERNATIVELY, if you want to configure using the long-way; and using the attachments below, please follow the steps listed here:-
INSTALLATION STEPS -
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
PART 2 - Customizing Your Cube using Touch Settings!
Step 1: Install Touch settings V1.22.cab, then soft reset.
Step 2: Go to windows\startup and delete file called "Mediahubmini"
Step 3: Soft reset (I don't think it's neccesary though, but i do perform
this step.
Step 4: OH YES! Also install the missing ICON files for the APLauncher - AL_xx_Touch.zip into a separate directory (eg. \Touch).
Step 5: Copy the same ICON files(from Step4) into \Windows. (these files were missing in Part1).
Step6 - Soft-reset and you should see everything working!
CHECKLIST ON HOW TO AVOID BLACKSCREEN AFTER YOU INSTALL THIS APPS
1) Make sure that you have HTC Home, HTC Audio Mgr & Plugin installed and activated in Today settings.
2) Make sure you install all the missing AP_xx_Touch.zip ICON files.
3) If you have Touch Settings program installed -
a) Make sure you DELETE MediaHubMini.lnk from \Windows\Startup &
b) Start Touch Settings and click SAVE to save the settings once after missing icons are installed.
Once you have Steps 1-3 done properly, just do a SOFT-RESET and the cube should be working.
NOTE: Below is a photo of Touch Settings V1.22.
( and here's the official link from the author - http://ww2.fatattitude.com/software/software-item.aspx?appid=10 )
If you're happy with his work, you can buy him a beer - http://www.fatattitude.com/buybeer)
Additional info available here - http://forum.xda-developers.com/showthread.php?t=324556
(Pls note that this is still in Alpha testing stage so install at your own risk)
ADDENDUM - (POSTED on OCT 16, 2007)
TOUCHSCREEN ACTIVATION FOR TOUCH CUBE
Thanks to efrost's FTouchFlo (Alpha 3 version) with application launcher function, I can now use my finger to 'activate' the cube without using button!
For efrost's program FTouchFlo, please refer to his posting and donate if you're happy with his contribution! Here's the link - http://forum.xda-developers.com/showthread.php?t=334965
Pre-requisite - you MUST have a working Touch Cube on yr ATOM.
Step 1 - Install efrost's FTouchFlo ( and follow his instructions to calibrate and then try making sure u can scroll).
Step 2 - Replace the default FTouchflo config file under /Program Files/FTouchFlo_a3/FTouchFloConfig.txt with the one I've posted here.
Step 3 - Restart FTouchFlo - under Programs, select Start FTouchFlo and then u try to test the scrolling.
Step 4 - You're ready to test the activation -
a) You must first put Ftouchflo into launcher mode (IMPORTANT STEP) - swipe your finger from down-to-up-and-down again in one swift motion. (you will hear a *beep* on your PDA to let you know that you've toggled into launcher mode.
b) Just swipe your finger from LEFT to RIGHT and then it will automatically launch the cube on your screen!
Step 5 - Once the cube is on yr screen, you can then continue to swipe from LEFT to RIGHT and be able to turn the cube.
TO ENSURE RESPONSIVENESS IN YOUR DEVICE
To ensure responsiveness in your device, do not specify too many applications to launch using gestures - I've modified FTouchFloConfig.txt to only launch the cube.
The touchscreen functionality for this Touch cube will improve as efrost improves his program!
Thanks efrost!
(Pls note that this is still in Alpha testing stage so install at your own risk)
NOTE: NO OFFICIAL SUPPORT IS PROVIDED FOR ANY OF THESE SOFTWARE POSTED HERE!
That good news if it can work. Will try it out when i'm free.
http://forum.xda-developers.com/showthread.php?t=333163
this is the one ur asking right? same touchflo? the author of that program is on that thread. He visited there & u may ask some question to him.
Hi mikewtw. May i know the installation steps?
wonder12 said:
Hi mikewtw. May i know the installation steps?
Click to expand...
Click to collapse
please try to read http://forum.xda-developers.com/showthread.php?t=328010 i never try to me also..
Installation steps I used to get Touch Cube working.
Here are the steps I used:-
1) Install jiggs's WM6 AKU070 (make sure HTC HomePlugin is activated - dunno if you really need it).
2) Install HTC Audio Manager.
3) Install HTC Audio Mgr Today Plug-in.
4) Install Touch flo(Alpha).cab
5) Install JT ButtonFlo.cab
6) Map Touch Flo pgm to one of the buttons - I chose the O2 Media Plus button.
7) Soft-reset.
Everything should work beautifully when you press the button for the old O2 Media Plus ( which has now been mapped to Touch Flo program).
Everything in the Touch Flo Cube should work.
And I believe there's also a Touch Flo Cube Customizer program available. I will try to repost it here if I find it working well.
I'm hoping someone will get the touchscreen interface working so that we can swipe and activate the cube using our fingers or stylus! Thats what I'm waiting for!
The ultimate "O2 Touch" is coming!
Mike
I will stick with my Iphone look O2 Atom, much cooler must say
Phone goes missing / Touch Settings V1.22 not working on this Touch Cube yet.
PROBLEM #1
I notice that my Phone button is missing from the HTC Home Plugin after I installed this Touch Cube. So instead of 6 buttons on the Home Plugin, I'm only left with 5 button!
Luckily the Touch Cube (using buttonflo) works and I can put my 9 favorite contacts in the contact page on the cube
When I reinstall Home Plugin again and reset, the 6buttons comes back, but my Touch Cube blanks out Then when I reinstall Touch Cube again, my Home Plugin is missing the Phone button...Oh well...
PROBLEM#2
Also, when I install Touch Settings V1.22, my Touch Cube blanks out when I try to launch it.
Tried installing Touch Settings before Touch Cube and vice-versa, but that didnt help either
If anyone can get Touch Settings V1.22 working with this Touch Cube, please post your files and installation instructions. THanks.
this touchflo is still on demo version, alot of programs have conflict here.
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Ultimate Chicken said:
Is this topic's Flo the *actual* one or the Flash based one? <.<?\
Edit: Hm, it's the actual one.
Unfortunately, all the thing does is just blackscreen my device, so I can't test it further.
Click to expand...
Click to collapse
You must have HTC Audio Mgr and HTC Audio Mgr Plugin installed and also HTC Home Plugin running first.
Then install Touch Flo(alpha).cab and lastly the JTButtonFlo.cab file. Map a O2 Atom button to Touch Flo and then do a soft-reset.
After that, it should work.
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Ultimate Chicken said:
Followed the instructions and still got blackscreen'd. Verified that the music manager plugin was running as well.
Is it possible that this program can be affected by the presence of HTC Today?
Also, where do you install it in? Both installing in Device Rom caused a blackscreen. Installing in ExtROM had no effect (pressing the button that runs TouchCube does nothing).
Click to expand...
Click to collapse
the CREATOR IF THIS program is BYKA.. he is on this thread
Try this in your ATOM..Touchflo...
http://forum.xda-developers.com/showthread.php?t=333163
Byka's Cool Touchflo 3D Cube
http://forum.xda-developers.com/showthread.php?t=328010
try to ask question on that thread..
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Ultimate Chicken said:
No no no, Riden, this is NOT Byka's program. If you install it, it says Bepe and someone else, NOT Byka. I have used Byka's rendition before, abliet for just 3 days - this one does NOT require Flash, unlike Bykas, leading me to think it IS the original, ripped, Touchflo cab that I'd seen around here some time ago.
I can NOT ask Byka about this version of the TouchCube. In fact, I have no reason whatsoever to approach Byka, as his flash cube installs and runs perfectly on my device, with the exception of being a memory hog. >.>
Click to expand...
Click to collapse
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
gives black screen , will wait for touchflo rom ,if it is possible
ah now its clear so this is another program..can u provide me a screenshot pls.. how good it is?
Click to expand...
Click to collapse
I can't, because it blackscreens my device. <.<
I'll try again when I get home, tho, but don't expect a miracle. This needs to be worked on.
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Exellent
jiggs said:
started to inspect the TouchFLO. Boy, this is going to be another set of sleepless nights.
Click to expand...
Click to collapse
I can smell TouchFlo on our MightY AtoM soon
Related
Hello everyone !
Heres a new rom..
This rom is from taiwan made by Youzii.
- Build 18125
- No Cube, but TouchFLO and Touch Comm manager
- Including some tools and apps (Pocket RAR, psshutxp, pbar, and more!)
- Very stable and fast !
- Page Pool is 6 MB !
NOTE !
I have just updated this version and it works very well, BUT you might use the NVID WM5 rom before you flash this one, NOT the one which is included.. That made my phone start to boot loader..
Download Link:
Here
I have changed the files a little so they now look more like the ones we are used to..
http://da9l.4shared.com/
1. Under the EVO7 folder download both EVO7.part1.rar and EVO7.part2.rar
2. Begin with the extraction of part 1.. Run the exe thats the right for you
3. Now after flashing is done remain the pda unused and extract EVO7.part2.rar
4. Run Upgrade_Rom.bat and wait for its completion. Do as the utility tells you to
5. And now the rom should be installed !
Pictures in the bottom if the thread!
Thank You For ROM
All is OK
The page pool is 6mb.
Thank you ! will update it !
Thank you for sharing, Da9L!!
As in EVO7tw, Cube and HTCHome can be installed in EVO7en indepandantly with removable cab files later.^^
Visit http://cid-8231c261cbdd4326.skydrive.live.com/browse.aspx/818EVO/EVO7en to download the long-waited Cube and HTCHome cabs now!!
Thank Support for the mirrors:
http://rapidshare.com/files/51991260/EVO7en.part1.exe
http://rapidshare.com/files/51991566/EVO7en.part2.rar
-------------------------------------------------------------------
How to falsh your device to EVO7：
-------------------------------------------------------------------
1.Flash PV_TEMP (download PV_Temp http://tom-love.net/Rom/Prophet/WM6....et_PV_Temp.zip )
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
-------------------------------------------------------------------
Wanna try EVO7tw (with removable Cube and HTCHome)?? Here is the link to the original thread:
http://www.mobile01.com/topicdetail.php?f=224&t=385791&last=3478621
Tips: ---------------------------------------------------------------------
1. The default region is Taiwan which can be changed at "Start\Settings\System\Regional Settings\Region.
2. Support Far-East characters including troditional Chinese, simplified Chinese, Japanese, and Korea, etc,. To display the characters properly please set the region accordingly at the same path above.
3. It's strongly recommanded to update the new version of G4 SIP Tweak, a third party application incorporated in EVO7en, for a better dispaly to the app.
4. The blue lines on the uppermost screen is an application to show battery and memory status on the left and right part respectively. Disable it by deleting pwrstat.lnk at the folder of Windows\Startup if it is not right to your eye^^|||
5. If you prefer the original contacts, disable the built-in PocketCM by assing the right soft-button to Contacts with Soft Key at Start\Settings\System.
6. No higher than 264MHz over-clock is recommanded for stability, though 274MHz works fine for some devices.
7. The clock on the upper menu bar can be changed to the battery icon by editing the value of registry as below:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell] "ShowTitleBarClock"=dword:0 >> battery display (1 = clock display)
8. Button 4 is yet to assign. Do it with Buttons at Start\Settings.
9. Edit the values of registry as below to modify the sensitivity of Touchflo (finger scrolling):
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings "SpeedHigh" (20 is recommanded) and "SpeedLow" (65 is recommanded).
10. To edit registry, you may like to run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
11. X-button, thanks to the freelancer contributing it, seems to take to built-18125 better than pBar 1.4. (my case is that there are always 20M or so left no matter how long the device runs)
12. For whom like to read Thai characters properly, please visit the EVO7en link to download EVO extFont.cab
13. Original IM (原生輸入法) installation:
Copy all files OriginalIM.zip into the Windows folder
Import the registry file PhonIM.zip (注音輸入法).
Chajeiim (倉頡輸入法) and Mboxcht (手寫板輸入法) installation:
Copy the AdditionalDll.zip files into Windows
Import All_Chtim.reg instead.
You'll get all three input methods at once.
OriginalIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48906&d=1188663728
PhonIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48907&d=1188663758
AdditionalDll >> http://forum.xda-developers.com/attachment.php?attachmentid=48908&d=1188663783
AllChiIM >> http://forum.xda-developers.com/attachment.php?attachmentid=48909&d=1188663798
14. To get Chinese lunar calendar, change the value of the Dword, "ShowLunarCalendar", under "HKEY_LOCAL_MACHINE\Software\Microsoft\Calendar" from "0" to "1"
15. The letters chopped on the setting pages can be sloved by editing the registry as below: (Note: not for Chinese users)
[HKEY_LOCAL_MACHINE\nls] "SystemLCID"=dword:404 << change dword from 404 to 409
16. Users who are not good at modifying registry please install EVO ENGfix.cab to fix the letter-chopping problem on some setting pages.
http://forum.xda-developers.com/attachment.php?attachmentid=49966&d=1189363816
17. For whom who like to have the setting pages for HTCHome, please install EVO HTCHomeSettings.cab.
http://forum.xda-developers.com/attachment.php?attachmentid=49970&d=1189364038
18. Users who like to check your namelist with Celedial instead of the default SmartDialing, please modify the registry as below:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
change the path from "Ext"="\\windows\\phcanhtc.dll" to "Ext"="\\windows\\celedial1.dll" (reboot your device to get it^^)
--------------------------------------------------------------------------
Note: The Evo7 series supports devices listed as below:
* SPV M600
* Qtek S200
* i-mate JAMin
* Dopod 818 Pro
* Dopod 830
* XDA neo (O2 Germany)
* VPA Compact S (Vodafone Germany)
* TC 500 (T-Home Germany)
evo7 EN .....
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
dioxda2 said:
Flashed and using in the speed of 264. Everything goes so fine, I like its WLM version .2600, no need to mess up my contacts information ......
and I like the function of touchflo although its a bit too sensitive for my clumsy thumb.... ^_^
kool job. ^_^
SUPPORT!!
Click to expand...
Click to collapse
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
iiiox said:
Edit the values of registry as below to modify the sensitivity:
HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings
SpeedHigh (20 is recommanded)
SpeedLow (65 is recommanded)
To edit registry, please run the built-in Task Manager at "Today\Programs\Tools". There is an app named RegEdit listed on the buttom of the menu.
Click to expand...
Click to collapse
Dear iiiox,
noted, set, enjoying now!! ^_^
Thai font display incorrect
Thai font cannot display on today screen, how can I solve this problem?
I already change regional setting to "Thai".
thanks
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
G4 SIP Tweak.cab
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
tb146 said:
Hi There,
Can anyone inform me what is G4 SIP Tweak.cab intend to. Is it only for G4 hardware ?
If i have G3 hardware , should i use it ?
Thanks
Click to expand...
Click to collapse
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
mark_vip said:
ITS NOT WORK!
first step: i did upgrade by ROMUpdateUtility_NV_G4
*then HARD-RESET
when Windows 5 was loaded i started UPGRADE_ROM -
new OS not uploaded into device :/
(
extracted OS
Initializing...........End Time
)
Click to expand...
Click to collapse
Not totally sure what your point is. If it is that your device failed to upgrade from wm5 to EVO7, try the steps listed below.
How to falsh your device to EVO7：
1.Flash PVTEMP (you can find it at the forum everywhere, literally speaking^^")
2.Install Cert_SPCS.cab、EnableRapi.cab to the wm5 PVTEMP (your ppc).
3.Execute EVO7.part1.exe >> choose upgrade method 3 (No bother to try part 2, double click EVO7.1 Part 1 will do the tricks)
Note: Part 1 and Part 2 are the same file devided into two parts. The former is a self-decompressing file which associates the latter by itself)
4.Wait for 20 mins or so. (or you may like to check PdocWrite out in your PC for time's saving.)
5. 1st device configuration (the first time)
6.Hard-reset (type 1234 on Clear Storage, rather than hold two buttons + the tiny hole pricking, is strongly recommanded).
7. 2nd device configuration (the second time)
8. Start enjoying your "brand-new" device!
iiiox said:
Hi, nothing has to do with G3 or G4 chips. It's an application to set the default loaded IM (input method), to hide uncessary IMs, and to assign the default display of fonts.
Click to expand...
Click to collapse
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
fungsaikit said:
Big Brother iiiox is promoting EV07 English version here! This is a very great ROM. I am using the Chinese version now. It is very stable and fast.
One more important thing is that for all who prefer the BT sound quality of Fantastic B4 but not pleased with its stability and speed, this one will be your solution. Per Youzhi, he has used the A2DP driver from P800W. You will not hear any hiss sound under this ROM. I have tested it with my iTech S38 and Sony HBH-DS220 with great level of satisfaction.
Try it and you will love this ROM!
Click to expand...
Click to collapse
Haha!! Brother fungsaikit, I'm here only because Youzii's out of sight at the time being^^" You know that I can solve few [email protected][email protected] Only if Youzii ansers calls in person here....
BTW, why don't you try EVO7en^^?? It's even faster (though fewer applications like removable HTCHome and Cube at this moment^^)
Hi, please follow the following steps:
1. Flash the PV Temp Rom;
2. Install the Cert_SPCS cab to your device;
3. Install the EnableRapi cab to your device;
4. Double the file name EVO7.1 Part 1;
5. Choose 3 on the cmd screen;
6. Wait 20 minutes at least;
7. Disconnect the USB;
8. Press the soft-reset button on the bottom. Then press the camera button and command manager button simutaneously. When you see a few lines of words on the black screen, press the phone-calling button. You will see "FAT Format is completed".
9. Enjoy!
tb146 said:
Thank you bro for your explanation.... downloading now...
I will flash step 1 with PV Temp ..then EVO7.1 part2 , is it right ?
Perhaps you can guide me how to flash this ROM.
Thanks
Click to expand...
Click to collapse
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Hehehe, I am a bit lazy recently. Maybe because I flashed my 818 Pro at least 3 to 4 times a day before. Now the EVO7.1 is really fantastic. It is very stable and fast. The new method of calling out the cube can't be better in elsewhere. Also, I am playing with my new BT headset Sony HBH-DS220 these 2 days. Hehehe.... forgive me being a bit lazy to flash new ROM.
iiiox said:
Hi, "How-to-do" had been added to the fourth post on the thread^^"
Note: Devices can be upgraded via three options. The method I posted here is the most reliable one^^
-------------------------------------------
haha!! thank yuu very much, brother fungsaikt!! both of us offered the same solution^^!
Click to expand...
Click to collapse
So sorry, cannot wait to flash so i miss to read it.
Thank you guys....
GO HERE
NOT FOR ATOM EXEC NOR HP6800 SERIES.
First of all this ROM is basically an extension over JIGGS AKU 0.7A ROM ..
Thanks to Jiggs (Thanks Mate!), abusalza for his kitchen and all the other community members
This new ROM is much faster than the old one thanks to some more tweaks and newer versions..
The Rom is 6MB PAGEPOOL.... and includes the following.. :-
1. HTC DIALER
2. Total Commander
4. HTC communication manager
5. HTC Action Screen
6. Network wizard
7. WM5torage 1.78
8. HTC keypad , HTC Keyboard(with T9 Input )
9. HTC CUBE , works AGAIN this time FASTER , MORE RESPONSIVE and as before the Installation is SEMI-AUTOMATIC..(Senses left-right movement ,Very similar to the real HTC TOUCH) Thanks to Kona_Mtbkr
11.HTC Audio Manager and the Plugin..
12.FINGER SCROLL CONTACTS , comes pre configured with default softkey etc..(icontacts )
13.Many other Misc. add-ons also included
14.X-Button
15.HTC calculator
16.HTC Windows Media Player SKIN
Removed
1.Photo Editor
The free RAM is about - 20 -22 MB(with cube ,and HTC HOME running)
Free Storage :- 35 Mb.
Known Bugs:-
1.Extended ROM does not get unlocked(looking for a solution)
2.A2DP problems
3.Disabling Or Enabling Home Plugins Requires Soft Boot now..
RAPIDSHARE
4SHARED
INSTALLATION
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable DSUU.EXE
4. Follow on-screen procedure
After installation is complete , on the first boot you will be asked to install programs , please dont skip any one of them as this may result in malfunction .. , and also install 1 ,2 ,3 ,4 ,5 ,6 ,7 .cab files on your phone memory when prompted ..
IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..(sry forgot to edit..)
PLEASE DONT SKIP ANY INSTALLATION..
After all the programs are installed and you have rebooted once ..
Go to Programs MENU and open SIM MANAGER ,copy all your contacts to phone memory .
NOW REBOOT AGAIN..
You might notice bit slowness during first few startup but dont worry ...it will only be for a few seconds after which everything works smoothly..
After this you are all set to go , the left softkey opens up Action Manager which gives you quick access to new messages etc.. , the right key opens up the new contacts application .
A DOWN TO UP MOVEMENT ON THE SCREEN WOULD RESULT IN OPENING OF THE CUBE.
WHEN THE CUBE IS OPENED YOU CAN CLOSE IT BY SNIPPING YOUR FINGER UP TO DOWN.
FURTHER NOTES :-
1. I have also included Flash Video Bundle in an seperate folder when you UNRAR the rom ... you can install it along with TCPMP player(also included.) to view sites like Youtube etc..
2. In the Previous ROM Slide to Unlock was included by default ,this time i have included it as an optional .cab setup so incase you are interested you can simply install it , Note - You don't need to change the skin as thats all preconfigured in a custom CAB
So i am now uploading and the link will be up soon also , will be posting some screenshots..
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
I am currently using, jiggs rom 0.7a. and i'd like to give a try on yours but where can i get that mate? Cpacubo...
Rapidshare mirror is up now..mate..
Please READ THE INSTALLATION INSTRUCTIONS CAREFULLY
MMS problem solved?
Does this ROM solve the MMS problem on the previous version?
In the previous version of this ROM, I am having problems receiving MMS even after I do Auto COnfiguration and a Soft-Reset. I did not have this problem when I was on JIGG's AKU070.
I can't really say...but i think it should..man coz nothing at all related to MMS has been touched from the AKU.7A ..so i guess it will..
Sorry i can not check as i dont hv MMS activated..
hi too all
Great work
Hope in this one UNknown contact problam has been sort out.
good rom.
but i have a few questions.
1. is it compatible with atom life?
2. after updating to this rom. can i still use the wisbar to make my phone look like an iphone?
3. does this rom include touchflo already?
4. if i am on the "iphone" theme of wisbar, can i still use touchflo?
thanks!
@t3dong
1.NO
2.Yes
3.Yes
4.-Dont Know-
Thanks , this one works very well..
Ok, thanks a alot. I've downloaded it and will soon reflash my atom with this one... Can't wait to see the cube on mine..
Remember to read instructions carefully, sorry for repeating again but this is very important..
...IMPORTANT NOTE- 2.CAB ASKS FOR REBOOT WHEN INSTALLED PRESS CANCEL(right soft key) AFTER YOU INSTALL IT AS OTHER APPLICATIONS HAVE TO BE INSTALLED TOO..
Thaks 4 quick replay mate. I will follow your instructions...
wow awesome! what a good-looking rom. i love it very much. You've done a great job mate... keep up the good work. so far there's no problem with this rom. the cube turn nicely to the left and right. the other htc application are good as well. Oh ya, one thing, after i install Audio Booster, the skin of audio manager return to blue not black anymore but it's functioning well. Once again thank you for giving a new look and life to black atom!
can't seem to make the cube work...also the icontacts show nothing...am I missing something?
Yes , you are ..did you care to read the instructions..........please read them
Icontacts works after you have copied all contacts to phone memory..
As for the cube i would suggest you to read the instructions carefully , install all application..in phone memory..
No need to reflash just to a HARD-BOOT(Power +RESET) and follow instructions..
Hope it works this time
Yeah I read them very much..before running the ROM anyway, I did try to do Hard Reset to redo the installation of the cab files but it always hangs up after the 4.cab installation...I'm doing a reflash of the ROM from bootloader to try..
Thanks responding..will let you know
I reflashed...I don't get it...I get the Quick Launch Soft Key on the left but as per instruction it supposed to be the Action Manager
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
cool!
now u become rom creater. hehe. power!!! must pass down ur skill to me.
udayrulz said:
And did u swipe your finger DOWN TO UP on the screen to activate the cube mate??
Click to expand...
Click to collapse
yup..a few times..also I noticed it hangs so much..it only responds to up and down movements..not the left and to the right...
Windows Mobile 6.1 Professional AKU 1.0.0
5.2.19199 Build 19199.1.0.0 WWE (ENG)
v1g
Author:
- pArtizAn (Erofich)
Thanks to:
- Alex[DFR] - WM6.1 Pro XIP, a lot of useful info
- GreateVK - betatesting, advices, SmartPhone->PocketPC device id changing, rewritten keyboard driver
- Jony_aa - betatesting
What's included:
- NET Compact Framework v2.0
- xT9 Eng/Rus
- StarTrek settings applet
- Short Home button press to Win
- Long Home button press to OK/Close
- MS Office deleted
- Windows Live deleted
- Esmertec Jbed 3D java
Known issues:
- software keyboard required to write is some text fields
How to flash:
0) READ A README.DOC FILE located in RUU folder in the archive!!!
1) make an application unlock
1.5) make a SuperCID (optional)
2) copy content of SSPL folder to the root (\ folder) of your device
3) run SPL.lnk from the root (\ folder) of your device
4) run ROM Update Utility.exe (from RUU directory in the archive) on your PC
5) follow the instructions
6) wait until flash process will be completed
7) READ A README.DOC FILE located in RUU folder in the archive!!!
You can flash it over ANY (Qtek, Dopod or Cingular) rom!
Download:
https://disk.yandex.ru/d/NuX0TfNy3Przs
REUPLOADED in 2023
Erofich!
Looks amazing... Although the link is dead
Churchill said:
Erofich!
Looks amazing... Although the link is dead
Click to expand...
Click to collapse
link fixed
OK I downloaded it via the russian Forum...
It is mentioned that some fields need onscreen keyboard... Do you need it in messaging?
And how fast is the device with the PRO version??
link is dead again
It's WM61ProV1g.7z, not WM61Prov1g.7z.
Anyway, it's finally here, cant wait to flash it. Totally awesome.
I was waiting for this but I cannot flash right now. Can't wait to find time for flash and test.
Thanks a lot Erofich, you are the best!
Thank You!
It's already running on my Qtek 8500! At moment I've done only my first phone call with new OS
Thank You!!
im backing up my phone now and i will be joining the WM6.1 PRO community soon! ETA 90min. thanks Erofich!
backup done! preparing to flash... fingers crossed..
Beautiful ROM
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Really nice ROM
I like it a lot. Everything with Active Sync seems to be working great. Great work. I would like to donate something via paypal. is this possible.
woobieman75 said:
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Click to expand...
Click to collapse
i think you can change the language in regional settings. im not 100% sure, my phone is still backing up. cant wait to try it.
woobieman75 said:
Not that i dislike Russian but the Calendar and Date/Time show Russian and the rest is in English. Can this be changed?
Click to expand...
Click to collapse
Change it to yours in regional settings
most likely, you only need to change it in settings-system-regional settings
Update on Russian Language
Update: Sorry it was be default in Russian. I just set it to English.
Why should somebody change from standard WM 6.1 to WM 6.1 Pro? - The Pro Version has not so much funktiones - as i see...
What are the advantages of the new version?
Thanks!
Bug(s) List
OK i finally flashed WM6.1 PRO to my startrek. so *****ing as always (sorry Erofich, i just want to help you guys iron out the bugs), here is the bugs list. (to be updated as frequently as needed, so please check back this post)
Bug List (updated 20th Mac 08)
=======================
1. Microphone AGC does not work. enabling will only get a white display with nothing (doesnt hang the device though). and when you check it again, it is still not enabled.
UPDATE : Will be removed in future version
2. When in fake cursor mode, if you leave the device there for a while and it does into standby, the device wakes up in a black dark screen, with only cursor working and the rest of the buttons disabled. cannot access anything too. (i have the owner information displayed on power up optoion checked)
UPDATE : According to Erofich, new cursor coming soon!
3. Camera software is not displaying properly. no menu can be seen, or message from the software cannot be seen. settings keys not working too.
UPDATE : Currently in development by Erofich
4. I noticed bluetooth light is flashing when device is switced on, however, when the OS is fully loaded, bluetooth is not ON. not really an issue, just an observation.
Suggestion(s)
==========
1. back key for smartphone to be enabled so we can map it to close/OK instead of having to hold home key. (will it affect phone dialing backspace? im not sure)
UPDATE : As suspected, nothing can be done here. Holding home key for OK/Close is a bit troublesome,but i guess we just have to sacrifice this for WM PRO
2. where can i download abode reader LE 2.00.261818 cab that i can choose installation path? can you please make a cab for this program?
Annoying Issues with using WM PRO without touchscreen ( Not the author's fault )
=============================================================
1. Old programs that are not designed with soft key feature is a really a PAIN. have to depend a lot on fake cursor. hopefully GreatVK will have a better solution for cursor.
UPDATE : Discovered an easier way of minimizing. double click on home key will minimize any running program.
P/S :All these testings and getting used to is giving me a headache.. will do further testings later. Great work Erofich and your team! By the way, you just appeared in engadget! http://www.engadget.com/2008/03/20/windows-mobile-6-1-professional-running-on-an-htc-startrek/
Witch Type of t9 i have to install? The default cab for smartphone doesen't work...
slavix said:
Witch Type of t9 i have to install? The default cab for smartphone doesen't work...
Click to expand...
Click to collapse
this is WM6.1 PRO, smartphone softwares wont work with it (not fully compatible)
alexnvidia said:
this is WM6.1 PRO, smartphone softwares wont work with it (not fully compatible)
Click to expand...
Click to collapse
Yes tes.. but i think the Xt9 for pocket pc works.. but witch pack of xt9? I try something... i try to change mssp2 and statdict.0409 and dictprob.0409 file to italian.. but i have no results! My girls write and write message.. I think i have to Keep his hands occupied with my one eyed snake.. hahahah!
My wife recently got a Sprint Touch Pro, and considering the flashing junkie that I am (and how much I hate stock roms), the first thing I did was to jump in here to see what could be done about it. Much to my surprise, it seems that XDA-Devs has very little information regarding the HTC Herman variants (Sprint, Verizon, Alltel, etc.) since most of the development for the Raphael is being done for the GSM version only. There are a few scattered threads about this but I figured that a sticky (and a Wiki update) will not hurt the site and as an added bonus, it will help the noobs (and some Seniors too ).
I found most of this information in ppcgeeks.com, so feel free to lurk around that forum as well since it is packed with useful information.
Instructions are the same as with the GSM models, only inverted. In other words, [highlight]IF YOU FLASH THIS ON A NON-CDMA PHONE, YOU WILL BRICK IT. NO QUESTIONS ASKED.[/highlight]
I am not responsible if you brick, damage, or affect the functionality of your phone in any way, shape, or form. Do this under your own discretion...
And as usual, when in doubt...READ!!!!
Edit: You will need a software to unzip the files (Winzip, Winrar, 7-zip, etc). It has been reported that the Vista file decompressor (or something like that) will associate this package with Adobe reader, making it difficult to open it...
Edit 2: If you are flashing for MetroPCS, please follow this amazing guide that dreynam2 has put together!!!
Here goes:
Step 1: HardSPL Unlocking!
Again, all this information can be found in www.ppcgeeks.com (original thread here). I just wanted to make it available to people at this site. Thanks to cmonex and the full CDMA Raphael Elite Team!
UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)
CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!
SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!
there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C).
1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.
2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.
3. 0.35 for Verizon touch pro's ONLY.
Important:
first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!
preparations before flash:
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).
instructions:
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.
NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.
[highlight]EDIT: I tried on multiple occasions to upload the Verizon unlocker to this thread, but the system keeps on refusing it again and again (main reason why I had a link to the original site). Go to the PPCGeeks site and get the unlocker from there (alternatively, this was provide by psouza. Thanks!)[/highlight]
Step 2: Choosing the ROM that Fits Your Style
Congratulations! If you are reading Step 2, that means that you successfully unlocked your phone (or are about to make a no-no). Make sure that your phone is HardSPL unlocked or else you will not be able to flash.
Taste is a matter of personal choice. As I stated in my previous post, most of the development for this phone is being done at PPCGeeks, and since posting every Rom thread in here would be time consuming (and possibly useless), I am giving you this link to all the custom ROMS.
Which one is best you ask? Again, a matter of personal choice. Some roms are feature packed, whereas others are light and fast. Really up to you...
Link to Roms
Step 3: Flashing Your New ROM!
Well, Step 3, that means that you chose a ROM and are ready to get down and dirty with your device (and about to kiss that ugly stock rom good bye). As with the flashing of any device, make sure that:
a. Your device has battery of 50% or more, else you might end up with a half flashed brick.
b. You have ActiveSync/Device Central in your PC.
c. That you read the steps below over and over and over again until you can repeat them in your sleep.
[highlight]Make sure to follow every single step down to the T. I cannot stress this enough.[/highlight]
How to Flash Via PC:
1.download the ruu.zip attachment
2.unzip to your desktop
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there
If that fails please trying these directions (thanks sn0b0ard)
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Flash from microSD Card (Thanks to MadlyAlive):
1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.
Step 4: Tweaks, Tweaks, and Tweaks!! (Part 1)
Step 4!!! Wow, you must feel in cloud 9 right now! You successfully got rid of that stock rom (without making a $700 paperweight) and are ready to tweak your device to your own liking! Here are some tips and tweaks that I found over at PPCGeek (Original thread) Thanks Baffles!!
Note:Go to the original thread for all the cabs.
Tweaks and Fixes:
Basic:
If your device is showing you random issues, such as speaker/ear piece being crappy out of the box, do a hard reset. Some have reported this simple task has solved their problems. You can do this one of two ways: either select clear storage from the system tab in settings (Start->Settings), or power off the device, hold volume down and OK, and hit the power button.
If your data isn't working, try this.
Disable SMS Sent Notification: [HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settin gs] Set SMSNoSentMsg to 1
Install the Picture Mail enhancement from Sprint - run PIE, and click "Click here to check for new updates." (if you changed your homepage, go to Sprint PowerDeck from favorites) Then download and install the cab file listed. This will have to be done after every hard reset. Still seems picmail doesn't like to work right, though.
Phone:
Install new Audiopara for louder volume
Enable/Disable mute call when phone is flipped over - [HKEY_LOCAL_MACHINE\Software\HTC\PHONE] Set FaceDownMuteRing=1 to enable, or =0 to disable. Source
You can make your phone stop making noise when you enable/disable the radio. Edit [HKEY_CURRENT_USER\ControlPanel\PhoneExtendFunction \CDMA\FlightModeOnOff] and change Sound_on and Sound_off to desired sound, or blank for no sound. source.
Issues with answering your phone when a data connection is open (answer buttons don't do anything)? Looks like a tweak messes up a registry key that affects this. [HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings], make sure SuspendResume is set to #777 (not anything containing GPRS). This issue seems to be related to Advanced Config. source
Added 1/7/09:
Enable wake up on SMS - you can do this via DiamondTweak (possibly advanced config too), or [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL] DisableSMSWakeUpEvent=0 (to enable waking up). source
Set up Visual Voicemail on Sprint. More info here. THIS IS VERY YMMV.
Internet:
This hack no longer needed on the latest version of WMWifiRouter - Disable temperature sensing in WMWifiRouter to get it to allow you to connect. Options->Configuration->Battery->Next->Next->Next->Select "Disable temperature detection"->Next. There is a bug, at least in my version, that shows "Enable temperature detection twice" however selecting the second one disables it.
Hack Internet Sharing to work: [HKEY_LOCAL_MACHINE\Comm\InternetSharing] Delete Extension key, set/create MaxCMCon=0 (decimal). [HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings] Set ForceCellConnection="Sprint" -- Cabified Version Here
Change "Reply All" in poutlook back to "Reply" - [HKEY_CURRENT_USER\Software\HTC\BootLauncher\Servic es\OutlookEnhancement], set module to an empty string. TO revert, set module to "\\windows\\OutlookEnhancement.dll"
Information here on GeoTagging/Automatic uploading of photos using Shozu.
Change useragent in Opera Mobile to view full websites instead of mobile versions. Info here.
If you have issues with Gmail/IMAP and sending emails, Official fix here, or read this post
Make Pocket IE your default browser. How to here.
Skyfire now "works" on Touch Pro. It is not a real VGA version, just QVGA stretched up, so however crappy it may look it is the best flash solution for now.
New Opera Mobile from Touch HD here - May or may not perform better, some reports of issues/graphical glitches/etc.
Increase the maximum number of tabs in Opera - Close Opera and edit \Windows\Opera9\opera.ini and change the Max Allowed Tabs to the right number. thanks mclaser
Added 1/7/09:
Set Opera to be your default browser for all items. source
TouchFlo 3D / Manilla 3D
Add your city to the weather tab. Follow these directions making sure to use the modified copy of version 1.1 of the specified editor.
A better way - Install the cab from here and it will add all cities to the list for you, so you can just hit Add Location and find yours! Updated 1/8/09
Install flip clock if you want it. instructions here
Get some wallpapers
Wallpaper on every tab, transparent clocks and curtains. More info here
Optimize your music tab by removing the music store logo. Some Touch Pro specific directions.
Information on how to remove sprint Manila3D customizations and get an HTC Stock configuration here
Rename your tabs in Manilla3D. Tutorial and instructions here.
Remap Manilla3D to use Pocket Informant instead of the built in calendar. Complete information here
Increase TouchFlo's sensitivity, so you don't have to push as hard to scroll. [HKEY_LOCAL_MACHINE\Software\OEM\TFLOSettings] increase FingerPressure. Default is 16. I am having good luck on 128, I may raise it higher. Higher = more sensitive, lower = less sensitive.
Touch Pro Cleanup by GoodThings2Life - read this/download one of the cabs to automatically apply a specific set of tweaks/mods.
Action screen changes, customizable through registry edits. More here
Change the soft keys on the home screen. [HKEY_LOCAL_MACHINE\Software\HTC\Manila], change HomeLSKPath and HomeRSKPath. HomeLSKText/HomeRSKText = the text. More info here.
Added 1/7/09:
Change software used by some TF3D entries with SSMaPa - This can be a complicated procedure. source
Boost TF3D Performance - increase file system cache to 8MB, file system filter cache to 131072, FAT cachesize to 32768 (you can do this with advanced config). source
Discussion about scrolling/tweaking of scrolling here
Revive the tab change animations! info, and source
Other Theming Topics
Custom Start Icon/Battery/Speaker/EV/1X Icons - UPDATED 1/7/09
Step 4: Tweaks, Tweaks, and Tweaks (part 2)
Other
Get S2U2 to work: Make sure you install the VGA version, not the QVGA version. You can now use DirectDraw mode with the newer versions of S2U2. UPDATED 1/7/09
Get your battery icon with percentages here (old thread).
Battery/performance hacks if you're so inclined.
Turn it into your most expensive flashlight - Alternate program. Both work, nueLight v3.0 is what I personally use. UPDATED 1/7/09
Auto screen rotation with Gyrator 2, and Configure it to not rotate certain apps UPDATED 1/7/09
Fit more icons into your programs list with this tweak
If your text is too big, such as in text messaging, go to Start->Settings->System->Screen->Text Size and move the slider to the size of text you want. Alternatively, you can move your thumb in a circle around the OK button, similar to how you would use the click wheel on an ipod. This will adjust the font size too.
You can disable auto-wakeup when keyboard is opened.[HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Keybd] Create new dword "SlideWakeup" with value of 0 and soft reset. To revert, delete the key or set it's data to 1. Source
Get Old School word correction back (same as was on Mogul, etc) - Latest Cab here - Older Information:Updated information here and here.
Disable start-up sound / change it - [HKEY_LOCAL_MACHINE\Software\HTC\HTCAnimation] Rename both 'StartupGif' and 'StartupWav' to new values, or leave blank to disable. Source
Increase your screen's sensitivity. [HKEY_LOCAL_MACHINE\Drivers\TouchPanel] change PressureThreshold. Default is 37 Decimal, it is reported 240 decimal is a good new value for this. source
Added 1/7/09:
More Camera Modes! You can enable these in Diamond Tweak, there are options to enable Burst/Sport mode, videoshare mode, and increase resolution of sport/burst photos. source
Remove scrollbars: [HKEY_LOCAL_MACHINE\System\GWE] change cyHScr to 0 to disable horizontal, and cxVScr to 0 to disable vertical bars. source
Enable sound effects for keyboard open/close, info here. source
PST Tweaks:
First thing you must do is get your MSL. I wrote an app to make this very easy for you, more info on it here. If you have problems getting your MSL, put your phone in flight mode and try again.
You can tweak your Slot Cycle Index (SCI) to make your phone poll the tower more often. This makes your texts and phone calls come through quicker. This setting is a trade off between lag (most noticeable when receiving calls) and battery life. The default value on our phones is 2. Every step of 1 adds 1.28 seconds to the poll time, so at a value of 2 it is only polling every 5 seconds or so. Most people lower this to 1, so the phone polls every 2.5 seconds. This won't affect battery life much in areas of good coverage, but may impact it noticeably if you're in a poor reception area. Your Access Overload Class (ACCOLC) determines your phone's priority on the cell tower. The higher the number, the lower the priority. Do note that 0 and 1 are reserved for emergency service uses, so DO NOT use these. You can ACCOLC's of 2-9, default on Sprint should be the last digit of your phone number.
Now that I've laid down the basic groundwork of the two main mods, here's how to change them. Don't mess with settings in here unless you know exactly what you're doing, as phone performance and usability will be affected. To enter programming mode, open your phone screen and dial ##778# (may be ##778 on some devices, if that doesn't work, run EPST.exe from \Windows). Click edit, type in your MSL, and hit OK. Now choose View Info in the lower left corner, and hit NAM settings. On this page you can change your ACCOLC (remember, don't use 0 or 1). Now, switch to the Modem Settings page to change your SCI (default is 2, valid values are 0-7). Now accept the changes and soft reset, and you're updated!
More information can be found here
Useful Downloads:
DiamondTweak - some tweak options do not work.
Advanced Config - claims to be fully compatible UPDATED 1/7/09
Total Commander
PHM Regedit
TF3D Config [not fully compatible with TP yet] - more info here
i-nigma - read QR codes. Any Windows Mobile apps I release from now on will also have a QR code for quick and easy OTA installation.
BAF MSL Grabber - Get your MSL quickly and painlessly.
List As Editor - My little utility for editing the 'List As' property of a contact manually.
Touch Pro Cleanup by GoodThings2Life - Clean up the stock ROM easily
PocketToolman 2 - includes features such as disabling scripts in PIE and other OS tweaks/tools.
esmertec Java JBed - set up for 3D and VGA. More info here.
Radio Utilitues - scripts by GoodThings2Life to give you shortcuts to turn on/off BT and Wifi.
POP/IMAP Send Mail patch - Microsoft issued patch that fixes issues with sending mail.
SecondToday - gives you a second today screen to allow you to use other today screen items in tandem with TouchFlo 3D.
.NET 3.5 - also, if you need them, debugging messages for .NET 3.5.
[color]Added 1/7/09:[/color]
Some popularly requested cabs
Another list of useful apps
Large collection of apps - all indexed and in one bundle.
Custom ROMs and Tools, Low Level Stuff:
Hard-SPL thanks to Raphael Elite Team
HTC Debug Tools
Touch Pro Cleanup by GoodThings2Life
How to remap hardware buttons
Stock Roms for CDMA
ElectronicRice's kitchen
And of course, your custom ROMs can be found in the upgrade sub-forums. CDMA Upgrades and GSM Upgrades
Added 1/7/09:
ATI D3D Drivers - The jury is still out on if these really do anything. Some discussion here. source
Omnia D3D Drivers - See info on ATI drivers above.
Flashing Instructions
WM6.1 20931 Kitchen, CDMA, GSM
New Radios! CDMA and GSM.
SRS WOW Audio Drivers - Jury is out on this one too.
Hardware:
Video Cables:
Buy from Expansys
Build using pzztgotbagz method
PPCGeeks Alternate Method
XDA Method
Other:
Discussion of accessories/sites to purchase accessories.
Fix your noisy battery cover if yours makes noise. - here .... mirror here
Discussion and Indexing of Touch Pro build dates and issues. Another thread here
Discussion on battery charging and heat issues.
Added 1/7/09:
Dye your battery cover!
Step 5: The "OH SH*T!!" Step. Stock Roms
Well, if you are in Step 5, that means that you have to go back to Stock rom for whatever reason. Worry not, the roms are readily available. Just go to
http://forum.ppcgeeks.com/showthread.php?t=42741
Here you will find all your Stocks for most carriers.
If you have to Relock the phone for warranty purposes, just use the relocker in the first post. Now, there is a trick to use this thing. If you want to relock and just run the exe with the phone connected, you will get an error.
[highlight]Flash back to original Shipped Rom and Radio BEFORE Relocking!!!!![/highlight]
*First, put the device in bootloader mode (Hold Vol Down +Power +Reset until you see the bootloader screen (multicolored). It will say Security Unlocked and a bunch of other numbers including (and this is key) 0.37 Olinex (or Monx, I can't remember right now)
*Now, run the exe in your computer. This process takes about 1-2 minutes at the most. The phone will reset after its done.
*To check if it worked, wait until it finishes rebooting and go to bootloader once more. If done correctly, it will still say "Security Unlocked" but it will say 0.37.0000 instead of what I wrote earlier in this post. You should be goof to go from this point on.
Stuck. Thank you for collecting all of this information!
You are awesome, I have helped alot of new people who have flashed GSM ROM's to their CDMA devices and this will help out alot! Even though I have a GSM Fuze, please let me know if I can help you with this in any way. It has been discouraging to see how the new people who have mistakenly flashed the wrong ROM to their phones have been treated and I know alot about phones GSM and CDMA and am also a member of PPC Geeks and have been for some time (not much posting mostly reading) my name there is dashmaster1000. So if you would like some help or just want me to gather and compile information I am more than willing to help you! Again thank you!
Cal-El said:
You are awesome, I have helped alot of new people who have flashed GSM ROM's to their CDMA devices and this will help out alot! Even though I have a GSM Fuze, please let me know if I can help you with this in any way. It has been discouraging to see how the new people who have mistakenly flashed the wrong ROM to their phones have been treated and I know alot about phones GSM and CDMA and am also a member of PPC Geeks and have been for some time (not much posting mostly reading) my name there is dashmaster1000. So if you would like some help or just want me to gather and compile information I am more than willing to help you! Again thank you!
Click to expand...
Click to collapse
Thanks man! I have seen how you've helped people out (especially in the NRGZ roms since I am around there for the most part). I have asked NATF to cross post this sticky in the Raphael Rom Development as well, to prevent "accidents" from happening. In either case, if you do find some useful stuff that is not here, feel free to either pm me (I will update the posts) or simply add it to the thread yourself, whatever you prefer.
Once again, thanks for the praise
i need help. when i flash with the micro sd, all it does is take me to the tri-color screen that says "security unlocked" at the top
poisondminds said:
i need help. when i flash with the micro sd, all it does is take me to the tri-color screen that says "security unlocked" at the top
Click to expand...
Click to collapse
Is there any particular reason why you cannot flash via USB? I am only asking simply because it is a far easier process.
Just follow the instructions of Step 3 and you should be ok. One thing to mention, [highlight]do not let go of the VolDown and Power Button when you see the bootloader. You have to hold them down since it will go to a white screen with a set of instructions in blue right after that. It is the same process as with a Hard Reset.[/highlight] Make sure that you did the HardSPL prior to flashing a rom. Good luck!
Thanks!
I'm brand new. Just got my Touch Pro a few days ago and have been lurking around a few forums to get myself aquinted with the options available for custom ROMS and proggies. Thanks for this comprehensive guide for all of us newbies!!!!!
kstephens98 said:
I'm brand new. Just got my Touch Pro a few days ago and have been lurking around a few forums to get myself aquinted with the options available for custom ROMS and proggies. Thanks for this comprehensive guide for all of us newbies!!!!!
Click to expand...
Click to collapse
Not a prob. Enjoy!
Flashing Question
This may seem like a strange question but here goes...
I am considering flashing my Touch Pro and wonder if any one has tried doing it in Win XP Pro running under Parallels on a Mac? ActiveSync works fine so I know the communication between the two is fine. I really don't want to drag my old Win 2K machine out and upgrade the RAM and OS just to start playing around with different ROMs... but I don't want a $600 brick either.
Thanks to all in advance!
butchwhitt said:
This may seem like a strange question but here goes...
I am considering flashing my Touch Pro and wonder if any one has tried doing it in Win XP Pro running under Parallels on a Mac? ActiveSync works fine so I know the communication between the two is fine. I really don't want to drag my old Win 2K machine out and upgrade the RAM and OS just to start playing around with different ROMs... but I don't want a $600 brick either.
Thanks to all in advance!
Click to expand...
Click to collapse
It has been tested, and it works great.
On a side note, once you get HardSPL on the phone, I suggest flashing from your SD card directly. Not only does it eliminate the need for ActiveSync, but it is also 2-3 time faster.
total noob
HI every1.. total noob here..I am considering flashing my USCellular TP...
I understand USCC is CDMA? Does it matter which rom i use? Does the rom have to specify USCellular er what ..
im clueless thanks in advance
It should not matter as long as it is a CDMA rom. What makes it carrier specific are certain apps that come with the original. However, you may want to check with the cook, just to be on the safe side. Good luck!
Good ROM for Verizon TP
I have a Verizon Touch Pro and am thinking about flashing. I am curious what is a good rom that is out there. I love the TF3D so I want it included with the ROM. Aside from that I don't really have any preferences (Super fast would be a plus). Thanks for any advice.
xguerox said:
I have a Verizon Touch Pro and am thinking about flashing. I am curious what is a good rom that is out there. I love the TF3D so I want it included with the ROM. Aside from that I don't really have any preferences (Super fast would be a plus). Thanks for any advice.
Click to expand...
Click to collapse
Go to the link that I provided in Step 3 of my guide. Most of the available roms are in there. As far as which one is good, it really is a matter of personal taste. Mighty 4 (WM 6.1) is said to be one of the best and most stable ones out there. I used Fallen 2.1 and that was a pretty good rom. Very fast and relatively clean but with the app that you will want to have at one point or another. Good luck!
READ THIS FIRST
Finally Working Bluetooth problem
For ATOM/ATOM PURE ONLY
Download link moved to post #2
Step by step upgrading
NOTE: These steps only apply if you have an ATOM/ATOM Pure.
Basically, there are three steps to flash a custom ROM to your ATOM.
1. Choose and download your choice of custom ROMs
2. Flash the custom ROM to your Atom using the Device Software Update Utility (DSSU)
3. Flash the custom ROM using MiniSD
Preparation
Backup your personal information using a program such as PIM Backup (freeware). Also make sure your phone has at least a 50% charge. You need M$ ActiveSync 4.5 for XP or Windows Mobile Device Center for VISTA and 7 to upgrade your device through PC.
Please read through this guide and download the all the necessary files beforehand. That way, you know exactly what you're getting into.
Choose and download your custom ROM
There are many, many custom ROMs out there for the Atom.
Look through the threads and find a ROM that you like. Custom ROMs differ in their preinstalled software, system settings, performance tweaks, and more.
ROMs usually come compressed in a .zip file. Extract the downloaded ROM file to somewhere on your hard drive temporarily in preparation for the next step.
Flash Custom ROM Using DSSU
Copy the custom ROM file (usually came with 6 files) to C:\WINDOWS\Temp folder you just extracted.
Once you've got everything hooked up correctly, run the Device Software Update Utility (DSSU).exe program inside of the C:\WINDOWS\Temp folder you just copied. Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
In case you can't update the ATOM in active mode, you may need to update by entering bootloader mode. Hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. Then connect your phone via USB cable to your computer.
Follow the onscreen instructions to flash the custom ROM to your phone. Reboot your phone at the end and you're finished. Enjoy the new custom ROM!
Flash Custom ROM Using MiniSD
*Not recommended
Here's the step how to flash your Atom using MiniSD.
1. Extract downloaded custom ROM to somewhere on your harddrive.
2. Cut first 12byte header of diskimage_Ver.nb0 using hex editor.
3. Rename diskimage_Ver.nb0 to diskimg.nb0
4. Rename ExtendedROM.img to extended.img
4. Copy both files diskimg.nb0 and extended.img to your miniSD
Now, hold the down power and camera button and use your stylus to press reset button at the same time until you see monochrome bootloader screen. The Atom will flash the new ROM automaically. Once it done, setup the device and enjoy the new custom ROM.
Big thanks to HelloWorld, [email protected], Tj's and all atom tester...
WM6.5
Build 28205
Mediafire Clean-New UI 04/23/2010
Build 21895
Mediafire Clean 04/15/2010
Mediafire Neo Shadow 04/15/2010
Build 23016
Mediafire Clean 02/15/2010
Mediafire Neo Shadow (Bluetooth not Working) 02/12/2010
WM6.1 latest WM6.1 Core OS
Build 21056
Mediafire Clean 03/08/2010
4Shared Mirror, thanks to Vincentshjuan
Build 21054
Mediafire Clean 02/19/2010
Upgrade instruction:
Download and execute downloaded file, if something goes wrong, extract it and copy all files to C:\Windows\temp.
If you already running wm61 or wm65 go for OS+ExtendedROM, for wm5 user go for ALL option.
Not expected for DONATION, but always appreciated it.
Thanks Glossy.....wow first one in line..........
Downloading now and will flash it later.....will update you from the try outs.
Good work though!
I'm wondering and really hope if this is very CLEAN, FAST & STABLE WM6.5 ROM in LOW BATTERY CONSUMPTIONS for O2 XDA Atom. Thanks before GlossyX1, you're the Atom ROM masterpiece too!
Wow! Great!
Thank you for this new build. Will try soon...
Have a try and gimme some report...
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
vincentshjuan said:
Gloss,
Tried for half a day now, this is what I have :
- overall, this built is much better than the previous, in terms of memory and battery
- overall functions and programs ran smoothly and no problems
- calls and receiving calls all good
- I can't seem to set the ringer mode to ring and vibrate but the phone by default now will ring and vibrate even if not set for vibrate, so no complains there
- persian blue works nicely to compensate for WM6.5 not able to locate any bluetooth device to beam
- Tested and still unable to sync/add more than 2 bluetooth devices, but at least I managed to get activesync working and also my handsfree, that's all I want anyway.
- taps and display are all fast, no issues there.
- booting from hard and soft reset are coming up nicely now
- one advice for user of this ROM is don't try to unlock the Extended ROM and use, the Extended ROM not very stable and when it crash, you will have problem reseting and booting your device, takes a long time and a few soft resets
But overall for me, this is a good, clean and stable ROM(forgetting about the bluetooth issue). Thanks to Glossyx1 and Helloworld1.............
Let's hope someone comes up with a permanent fix for the bluetooth issue, then this will be the defacto WM6.5 for Atom's!
Click to expand...
Click to collapse
What do you mean by unlock the EXTENDEDRom? I use this ROM for several days and found no problem on my device. Now I uninstalled PersianBluetooth to save more memory.
Did you found another issue? Has anyone else try this ROM?
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
cwiggler said:
I am in the road right now and im gonna try it tonight when i got home. one thing i would like to know if it is possible to install Spb Mobile Shell (current version is 3.5) and install MSkip ProPlus Elegance skin since I like this skin so much? if it is possible, what is the xda atom resolution based on the list QVGA, WQVGA, VGA, WVGA? sorry not familiar with and this is a bit off topic but I am consider sticking on this rom until such time that there is a solution for the bluetooth issue.
Click to expand...
Click to collapse
Waiting for your feed. I'm not tested yed to install SPB mobile, but there's no issue when I install another cab application. You have to try it by your self and give us a report. ATOM is QVGA device. thanks
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Add application
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
I mean WM6.5(this ROM)....
vincentshjuan said:
Gloss,
What I mean by unlocking the Ext ROM is that I installed the unlock extended cab file so that the Ext ROM will be visible via file explorer or Resco explorer. Unless the cab I am using is not working properly for WM6.5(it's meant for WM6) but after I unlock it and became visible, I installed a few application on the Ext ROM to try, it was working fine until I need to soft reset the device(as some application do), then the Ext ROM is no longer visible and takes a long time to reboot(think OS can't get at the Ext ROM). Well, other issues is as my previous post, the ring mode can't set to ring and vibrate but it vibrates anyway. Then the same problem with bluetooth not able to add more than 2 devices still there. Otherwise I would say all is prefect.
As for SPB Mobile Shell, I tried installing it before under Helloworld's ROM(21869) before but does not work. The application installed okay but just could not get it to run, do not know why? Maybe some software conflict?
Click to expand...
Click to collapse
I see, you can't unlock the EXTRom as it is configured automatically in a file named config.txt. So, every chef has configured it depend on what it is configured in config.txt to EXTRom. Another thing, don't ever use other EXTrom but what is it included on ROM package, it wont work.
For the Ring mode, I can set it as usual in ring mode. Just go to setting->sound and notification->incoming call. Not working??? Try this, set to ring and vibrate, restart and set to ring.
Bluetooth??? Need some magic
I just tried to install SPB 3.5 and it works as well
vincentshjuan said:
Hi Gloss,
Where or how can I add applications(.exe) manually in WM6 to the program or Today menu section? Is there a way? I am trying to add some other application like Torch Light, Chess games etc.
So far so good your ROM........(up till now)....
Vince
Click to expand...
Click to collapse
No you cant, while run standalone application (.exe) you wont see any shorcut because it not registered to registry and doesn't have any shortcut (lnk). You can try to build CAB file and set all shortcut in (initflash.txt) for eq to put TorchLight.exe then write it down Directory("\Windows\Start Menu\Programs\"):-File("Torch.lnk","\Windows\TorchLight.lnk"), it will show Torch on Start Menu->Programs
Try this to make a CAB file http://forum.xda-developers.com/showthread.php?t=400221
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
So bluetooth handfree is not working again
vincentshjuan said:
Yeap, learned that after unlocking it today....had to reflash again and the 2nd time I did not unlock it, all fine after that. I was hoping to use some of the available memory on Ext ROM, so no choice then.
Thanks for the link for making cab, will go thru the thread and learn some cab making...
Cheers and keep at it......good ROM there.....clean and stable! The way it should be!
Click to expand...
Click to collapse
Thanks, glad to hear you'd loved the ROM.
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
cwiggler said:
Hello glossyx1, i successfully flash my atom and i loved it. one thing that i encountered is that my screen goes to color white. so i need to soft reset but after a few minutes it goes to white screen again. any solution? tnx
Click to expand...
Click to collapse
It usual happen while atom run out of memory. My ROM preinstalled with PersianBluetooth, when you try to install custom home screen eq SPB then your screen goes white. Here is a tip for you: Try to remove PersianBlue and see what happen. I'm not recommended to use any custom Home Today screen because WM6.5 use more resource than you can expected.
dragon man said:
So bluetooth handfree is not working again
Click to expand...
Click to collapse
I don't have any bluetooth device, test it by your self and give me feedback.
Cheers...
Dragon,
Bluetooth handsfree is fine, working. Only issue is choose your bluetooth devie wisely as you can only add 2 bluetooth device only at the moment. So for me, luckily 2 is just enough, one for activesync and one for handfree(bluetooth). The reason is after you added the 2nd bluetooth device, you can't see add new device tap anymore.
Good luck....