Related
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
They have a Dopod housing here for $53 US
http://cnn.cn/shop/htc-c-277.html
I'm looking for a LCD hehe
EDIT: ended up getting http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260108396462&ssPageName=ADME:B:EOIBSA:AU:11
Comes with instructions and the LCD and a tool kit.
sjbale said:
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
Click to expand...
Click to collapse
Anyone know of any UK suppliers of parts?
Softbank 2MP Camera Part
I am looking for a camera replacement part for my Softbank. I was the part that caused my Softbank to display totally WHITE SCREEN.
Here is the story:
Last five months I accidentally dropped my Hermes on the floor carpet and when I turned it on, it displayed all WHITE SCREEN. I tot the LCD screen was the culprit and bought some LCD for replacement from eBay. I dismantled everything and tried to replace the LCD but it resulted the same WHITE SCREEN. Then I dismantled the Jog Dial and the Camera and reattached part by part. The jog dial caused no problem but the Camera showed positive result on WHITE SCREEN behavior. Now I dismantled the Camera and my SOftbank X01HT works like a charm... Well almost like a charm with no 2MP Camera... LOL...
So I am looking for the part also to put it back on my TyTn...
Hi guys,
Do you know where can I get the TyTN VGA front camera?
Regards
i have a new refurbed TyTN...looks immaculate but is unfortunately suffering from a hybrid brick (corrup CID, no KITL and SPL 1.09)
I have all accessories and original packaging if anyone wants to make me a good offer?? (PM me if you are interested)
should also point out that it has a qwertz keyboard
tytn (spv m3100)
hi guys..
i'm desperate..I can't hear any sound from my pda..I think that my audio hardware broke down..do you know where I can find any spare parts for this?thanx in advance..
first post^^
been looking for these for a long time now and i've never seen the actual 8525 housing at this site, only the tytn/dopod versions, but they're are now in stock!!
just a heads up b/c i read a while back a few people are looking for 8525 housing.
now my 8525 wont be battle-scarred and garish looking <.<;
http://cnn.cn/shop/8525-grey-housing-cingular-p-1852.html
two 8525 phone
i have two 8525 spare part phone. if interested pm me
spare parts for tytn/m3100
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
punkzilla2k said:
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
Click to expand...
Click to collapse
You can find spare parts and accessories here:
http://www.phoneystore.com
8525 front cover and Mail/Explorer rocker needed
Got the phone with these two dented and although it works okay, would like to replace them one day.... anyone have these parts for a few bucks? I can do PayPal real easy....
Thanks,
Ted
Dpad for Cingular 8500
I'm looking for the circuit board behind the dpad of a cingular 8500, if anyone has one left, pm me please.
I am looking for the little cover above the mirror on the back side of the device that is usually part of the battery cover or alternativly the entier battery cover.
If you have them please PM me.
Broken ATT 8525, Touch screen totaled
I was taking photos and drop it right on the face. I was using it as a iPod with a unregistered go phone sim card till I did a Master Reset and now it's a paper weight because I can't do the start up BS. Touch screen is totaled but the rest of the internal parts and battery are good, front cover don't look bad, back is great, have 2 stylus and a hard metal case for it too. PM me here and we'll work something out, Paypal OK. Vince
It's a paper weight to me, I'm not going to put money other than shipping is someone wants to send me a screen for the joy of it, if I fix it I'd just give it to my sister anyway. I'm happy with my Tilt and I'm ready to move on to the Fuse soon, thanks for the replies!!
I travel building Cellular sites a lot and I've been happy with my current Tilt ROM so I haven't logged on and seen all these replies till now. I Love HTC phones and the chefs that put the long hours and headacks into them, They get the big thumbs up from me! Thanks to all also that add and beta test too.
Also I live in the midwest in the US and BASE Jump my towers mostly, if anyone interested in jumping with me let me know and I'll let you know if I'm in the area, I got combo's!!! IF you want to Skydive I live in the Indianapolis area also. --> www.skycircus.com , My DZ 8 miles from home. I'm a Parachute rigger also.
Hebrew keyboard?
I have a TyTN II (T-Mobile UK Vario II) that I'm setting up for a friend in Israel; does anybody have or know where I can get hold of a keyboard with Hebrew lettering?
Thanks
Need a replacement motherboard (main) for HTC TYTN
Friends,
My HTC TyTN has problems with some connectors right on the main motherboard..... I would like to know if anyone has any spare HTC TyTN which is completely broken and can be usable for its spares......
Also, if any one is aware of any site where I can get the mani motherboard...it would be really helpful.
thanks
Milind
I am interested too in a motherboard of Tytn. I have problem that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it (for example to change that connector with a new one)? Does anyone know how to do so? I really need help...
thanks in advance
Need help!!!
Smashed my LCD and orded a replacement from HK. The part number they sent me was 60H00037-00M. After installing it, all I get is a white screen. Sent it back and recieved another one with the same number and again the same deal!!!
The part number Im chasing is 60H00056-00m or TX0704APAA1. I think it is a mfg by Hitachi.
I cant find anything with this part number on the net and was wondering if anyone knows if there is an equivalent that could be used insted.
Mal..
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
teknics said:
Are you sure that your connections are secure and lined up properly? I replaced the screen on my 8525 and the ribbon cable was not connected properly the first go round. It is the one with the tiny screws.
Click to expand...
Click to collapse
Teknics, are yoy refering to the two incy wincy screws that fasten the ribbon to the d-pad at the bottom?
Mal..
Yes that cable, but also make sure the ribbon cable that slides into the locking connector on the main board is in properly also.
HK?????
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
sllabymkcus said:
hi all
i have been looking for a replacement rear speaker and a front facing camera for my phone and so far the only leads i have been able to get is to look on ebay for someone selling their damaged phone for parts. you mentioned a HK in your first post is that a place to buy Hermes spare parts and if so is there a minimum amount that you have to buy?
Click to expand...
Click to collapse
HK refers to Hong Kong you can purchase screens and digitizers that i know of but as far as small inexpinsive electronics i think your sol. just out of curiousity did you manage to blow the speakers or what? i have played some pretty loud music through my hermes using mortplayer and have not managed to blow them yet.
I have 60H00056-00m or TX0704APAA1 LCD.
msn:[email protected]
I am looking for a TX0704APAA1 for my HTC Tytn.
Apparantly this is the Hitachi model other models are also available on ebay (Samsung and Toppoly). As I understand Samsung and Toppoly are not compatible with one another apparently they use different controllers.
As for the Hitachi I have know idea whether it is compatible with Samsung or Toppoly, which is why I am on my quest after the Hitachi...
Anyone know where I can get one?
I think this one might work.
http://cnn.cn/shop/8525tytn-screen-p-1704.html?osCsid=37d6ea546d0b93a035876bf59f229d3b
The 60h00032 or 60h00037 did not work on my dopod 838 pro.. I just got a white screen.
I have an MDA and it works fine, its just got some cosmetic damage. Does anyone have a perfect condition touch screen, and housing that I could maybe purchase?
Is it under warranty?
Hi fella, If it's under warranty send it back to HTC, For £39 they will replace the screen and cover! Mines due to go back at the end of the month!
Anyone have any experience with this? I was thinking about trying it because the replacement housings for the HTC Wizard are crazy pricey IMO. heres a link
http://www.dummyphones.com/product_p/mda-tmobile.htm
I mainly need a new volume spring thing and the outer housing. Will this work? The site says no but i have a feeling they're dirty lairs.
Waiting for your impute peoplez!
capn out!
I recently bought a dummy 8125 with hopes of using its case as a replacement for mine. When I take the dummy phone apart, I will let you know if the volume key is a real functional key. My belief is it must be, but who knows. I only paid $6.00 US dollars so not big loss if I am wrong.
Jeff
awsome to hear that Jeff, ill be watchin this thread. Let me know if the case works too please.
Well I have good news and bad news. Here is what I did. I took my recently acquired HTC P4300 dummy phone (identical layout in every way to a 8125) and completely dismantled it. Of course there was no screen, motherboard, or working keyboard. What there was:
Complete outer housing
Complete inner housing & keyboard assembly
Buttons: Power, voice record, camera, all front keys (ie/inbox, talk/end, navigation, two softkeys)
The com manager/volume slider buttons are attached to the keyboard, they are functional keys. But you can not use the keyboard assembly as the keyboard is fake. You could pry them out and put them in your old keyboard assembly.
I disassembled both the dummy phone and my 8125. Swapped everything except the keyboard. The dummy phone camera cover does not have an antenna. So you carefully peel up the antenna and glue it down to the new dummy camera cover. The other modification is you peel up the keyboard keys and put them on the 8125 keyboard. (hard to explain) They keys are one big skin glued down.
Here are some pictures. ( I apparently can't hold the camera still)
http://tonyandjeff.spaces.live.com/...ntExpand=0&addCommentFocus=0&pauseSlideshow=0
The phone I bought:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330195843696&ssPageName=STRK:MEWN:IT&ih=014
help!!!
jeffla said:
Well I have good news and bad news. Here is what I did. I took my recently acquired HTC P4300 dummy phone (identical layout in every way to a 8125) and completely dismantled it. Of course there was no screen, motherboard, or working keyboard. What there was:
Complete outer housing
Complete inner housing & keyboard assembly
Buttons: Power, voice record, camera, all front keys (ie/inbox, talk/end, navigation, two softkeys)
The com manager/volume slider buttons are attached to the keyboard, they are functional keys. But you can not use the keyboard assembly as the keyboard is fake. You could pry them out and put them in your old keyboard assembly.
I disassembled both the dummy phone and my 8125. Swapped everything except the keyboard. The dummy phone camera cover does not have an antenna. So you carefully peel up the antenna and glue it down to the new dummy camera cover. The other modification is you peel up the keyboard keys and put them on the 8125 keyboard. (hard to explain) They keys are one big skin glued down.
Here are some pictures. ( I apparently can't hold the camera still)
http://tonyandjeff.spaces.live.com/...ntExpand=0&addCommentFocus=0&pauseSlideshow=0
The phone I bought:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330195843696&ssPageName=STRK:MEWN:IT&ih=014
Click to expand...
Click to collapse
Hey Jeffla!!! i noticed you changed your HTC p4300/wizard casing for a another one, and i was hoping if you could tell me where i can buy a new/use full body housing for my wizard!!!!!!! i"ve been looking for an original all black housing but all i can come across is the silver housing and i don't want that!!!!! if you could help me out i would be in great debt to you!!!!!! THNX in advance!!!!!!
Heys guys, i was recently asking myself the same question. I posted it on Xperia subroum, but really no good answer came up. So i'm gonna ask here.
Would be possible to disassemble this dummy phone: http://cnn.cn/shop/sonyericsson-xperia-dummy-phone-p-6107.html
I would like the use the battery cover, front buttons and "maybe" faceplate.
Thanks in advance.
Nah, I have dismantled some of the dummies in order to obtain parts.
They really are different, almost nothing can be reused
EqX
You knew it was coming. I'm looking to buy a Touch Pro 2 on T-mobile usa contract. However, I'm not a huge fan of what T-mobile has done to the phone. Can anyone here confirm whether the housing differences are cosmetic or not?
I'm fairly certain that the innards are the same across the board, but the T-mobile version doesn't have the same rounded edges that the htc version does. The corners are more pronounced for t-mobile. I'd hate to spend 50-80 bucks on a housing and have it not fit.
Any help would be greatly appreciated. I have a T-mobile G1 now, and I'm looking to get back to WM. Android just isn't as 'open source' as I had originally imagined.
I think it's possible. All the buttons are in the right place and it seems silly to change the innards of the phone.
The only problem is that with the HTC version, you'll have an empty hole for the forward facing camera.
I'm not sure if the glass cover is the same size, it appears bigger on the TMO version than the HTC version, just my opinion.
I like my Tmo TP2, but I wish it wasn't brown. It's actually a pretty attractive package, I thought brown would be super fuglie, but I would much rather have the stock HTC black and silver... or something else, all black perhaps.
Now that I took a closer look at the original HTC version, it's come to my attention that there isn't a soft reset button on the side of the phone. Only the hole for the secondary microphone used for the speaker phone.
It could be hidden under the battery case because the HTC battery case covers the sides of the phone whereas the T-Mobile verson only covers the back. It sort of makes sense because the T-Mobile version gives easy access to the SD slot so I don't see why they wouldn't do the same for a soft reset button.
This is all merely speculation. If somebody could confirm that there IS a soft reset button on the HTC version hidden beneath the battery cover, I'd consider taking the hit and buying a replacement HTC case for a swap.
Hi, just to confirm there is a soft reset button hidden under the battery cover (unbranded HTC). It's about 1cm below the mic hole and slightly to the left if that helps.
d0s said:
Hi, just to confirm there is a soft reset button hidden under the battery cover (unbranded HTC). It's about 1cm below the mic hole and slightly to the left if that helps.
Click to expand...
Click to collapse
It helps greatly. This goes to show that the internals on the T-Mobile version are exactly the same as the unbranded HTC version. Doing a case swap should, theoretically, fit just fine.
Now to find a sub $50 replacement case lol.
nevermind. didn't read right
Sdcard slot is on the side for T-Mo, I read that Unlocked or OEM TP2 have it behind the battery.
SD card slot on OEM TP2 is behind the battery cover but it appears to be in the same spot as the TMO version. The chassis of the OEM vs TMO version looks slightly different, hopefully not too different.
At any rate, you would have to buy the full housing for the OEM AND the digitizer screen to convert a TMO TP2, in my opinion because the two screens are different sizes.
Anyone tried this yet
I'm wondering the same thing too, I have found many housing, even the original silver one but it seems like it needs a new screen (since the HTC one has a bigger screen plate than the Tmobile it appears)
+ the back where the speaker is for the tmobile is part of the inner phone built, which might interfere with the full silver plating of the HTC original. So from pure speculation of the build, I believe it will not work...
But I have msged several members on this issue and awaiting their reply to see if they have tried it and succeeded
jehlinger said:
SD card slot on OEM TP2 is behind the battery cover but it appears to be in the same spot as the TMO version. The chassis of the OEM vs TMO version looks slightly different, hopefully not too different.
At any rate, you would have to buy the full housing for the OEM AND the digitizer screen to convert a TMO TP2, in my opinion because the two screens are different sizes.
Click to expand...
Click to collapse
No they're not. Both phones have 3.7" screens. The only difference is the housing and the keyboard. The TMOUS version has the ALT key first, then the CTRL key whereas the unbranded HTC version has the CTRL key first, then the ALT key.
All the other buttons are in the exact same position. Like I said before, I'd love to be the guinea pig, but not for $80.
The T-Mobile version has tapered edges ( corners ) compared to the OEM version. Not sure if this would pose a problem or not. Might just be cosmetic.
source: http://www.engadgetmobile.com/2009/08/12/t-mobile-touch-pro2-review/
It is not the same
Htc can call it the Rhodium or whatever, When the maual was leaked codename TUNGSTEN.
There are not the same, you can not change it to look like the other Touch Pro 2.
This device will be outdated in less than 6 months.
Devices getting ready for Winows 7.
Not that serious.
might be outdated in six months, but I doubt there will be a 2100/1700 device available with Windows 7 anytime soon.
Also, the manual might be codenamed TUNGSTEN, but when I had put it in bootloader before loading HSPL, it said "RHOD210" in bootloader with no reference to TUNGSTEN.
I just might try this. I know a guy who is pretty good with phone mods, but I will have to replace the faceplate as well. As in kable's link showing the generic TP2 and T-mobile version side-by-side the faceplates are different sizes. So it's going to be about a $120 mod plus labor.
G1 now getting WM update check it out
I see this thread is a bit dated, but has anyone actaully attempted this conversion yet? I see the housings for sale on CNN.cn and ebay, but doesn't look like it would be an exact fit with the T-mobile version considering the more rounded edges on the front rim of HTC housings.
Just wondering if anyone has actually gone through with it, and could fill me in on all that is necessary.
InGeNeTiCs said:
You knew it was coming. I'm looking to buy a Touch Pro 2 on T-mobile usa contract. However, I'm not a huge fan of what T-mobile has done to the phone. Can anyone here confirm whether the housing differences are cosmetic or not?
I'm fairly certain that the innards are the same across the board, but the T-mobile version doesn't have the same rounded edges that the htc version does. The corners are more pronounced for t-mobile. I'd hate to spend 50-80 bucks on a housing and have it not fit.
Any help would be greatly appreciated. I have a T-mobile G1 now, and I'm looking to get back to WM. Android just isn't as 'open source' as I had originally imagined.
Click to expand...
Click to collapse
if you ever change yours out, i would definately, jump on your old case. i love the bronze colour. im not digging the AT&T scheme. if you swap out the keyboard hit me up, that's what i really am wanting.
I want to switch it myself.I do not like how it looks and also ProClip does not have a car mount holder for the T-mob TP2.
The only reason I got it is the 3g.
Did somebody succeed in replacing the covers?