S200 White Screen - JAMin, XDA Neo, S200 ROM Development

Hello, i flashed my s200 with WM6, everything went well, but when i start my phone i get a white screen after showing the HTC logo, and i only ear i beep and nothing appens, can someone help me please? and i cant do the downgrade because it gives me an error connection...im using windows vista...thanks for any help

battery..
are you sure that is your battery full ?

Yes its full

2PShakur said:
Hello, i flashed my s200 with WM6, everything went well, but when i start my phone i get a white screen after showing the HTC logo, and i only ear i beep and nothing appens, can someone help me please? and i cant do the downgrade because it gives me an error connection...im using windows vista...thanks for any help
Click to expand...
Click to collapse
hi 2PShakur, try to put phone in bootloader, and flash to WM5 aku 2.2. try using win xp.
read section RECOVERING FROM ERROR IN STEP 8 WM5->WM6 in http://forum.xda-developers.com/showthread.php?t=310452

Related

MDA completey dead (No bootloader mode)

Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?

Stuck at Tri Colour Please Help

Hi,
I was trying to update my Hermes (Orange M3100) with the latest Official Orange Rom.
It got to about 12% then stopped. Now i just get the tri colour screen even when trying to use Hard SPL7 i get error [260] update error.
Active sync doesnt connect to it as it wont boot just sits on the tri colour screen.
I just want to get back up and running can anyone tell me what i need to do please?
I have updated roms many times before but this went wrong for some reason?
Thanks a lot
Jason
panic over tried on differnt computer. all sorted
solution found, thread closed

[Q] Help needed =(

Hi guys,
I've got this problem where i flash HSPL onto my HD2 and installed the energy rom after that. The problem is that when I start the Camera, the whole phone went blank and now after restarting (countless), the screen shows a white screen with the HTC logo on it and it just won't boot/start. How do I rectify this?
honglim said:
Hi guys,
I've got this problem where i flash HSPL onto my HD2 and installed the energy rom after that. The problem is that when I start the Camera, the whole phone went blank and now after restarting (countless), the screen shows a white screen with the HTC logo on it and it just won't boot/start. How do I rectify this?
Click to expand...
Click to collapse
Make an hard reset and you can boot but look all your version of rom spl and radio i've look same problem with an older version rom.
Sorry for english
can u remember your radio?
pls check if it is compatible at energy's thread
if not compatible..u may want to enter bootloader mode and reflash the radio
cheers

[Q] htc p3450 error

asalamualikum , hi , hope you all fine.
i need help.
i have installed a wm 6.1 rom in my htc p3450. no matter i install any rom.
always when i shut down it and then restart it flashes and only white blank screen appears.i have to restart it many times to get it work properly.
kindly please solve it.
thank you

Bricked HD2,Developers Help!

Hello HD2 users!
My problem is: Im got new HD2, tryed to update it to android, im was do all steps, but now it wont boot at all!
Im can only boot it into HLSP colored screen, nothing then... Im tried to install new software, ORIGINAL from t-mobile, but it's always stuck at 0%...Tried many difrent things like: New Radio, Reinstall HSPL, Install Magldr, Soft reset,Hard Reset! Im always stuck at 0%!! Evet tast29 wont start at all!
When it stuck at 0% im turn my phone, but it wont boot again until im get my batery out for 5-10min...
Really, mi in love with this phone, im can't get phone in service, because im dont have warranty...
Everybody,help me... Real fix ( one man ho helps me to get my phone works) will get 15$ at paypal!
Thanks All!
Im will be active!
You may should put your Phone into the Bootloader, then reflash the HSPL, put it again in Bootloadermode and then try to flash an Custom Rom for your Phone.
Edit: You wrote T-Mobile Original Rom so do you may have the american Version of the HD2 and flashed the wrong thing ?
I hope I could help you.
Greetings by Myself5
Sent from my Galaxy S2.
....
Yes im have t-mobile HD2...im flashed HLSP3, now is completly dead.... im think my bateri is out, how to charge it?
Do you know someone who has an HD2 and would allow you to charge it ? If not put it on the charger and set it in bootloader. Normaly it should load then.
Sent from my GT-I9100 using xda premium
Galaxy3HELL said:
Hello HD2 users!
My problem is: Im got new HD2, tryed to update it to android, im was do all steps, but now it wont boot at all!
Im can only boot it into HLSP colored screen, nothing then... Im tried to install new software, ORIGINAL from t-mobile, but it's always stuck at 0%...Tried many difrent things like: New Radio, Reinstall HSPL, Install Magldr, Soft reset,Hard Reset! Im always stuck at 0%!! Evet tast29 wont start at all!
When it stuck at 0% im turn my phone, but it wont boot again until im get my batery out for 5-10min...
Really, mi in love with this phone, im can't get phone in service, because im dont have warranty...
Everybody,help me... Real fix ( one man ho helps me to get my phone works) will get 15$ at paypal!
Thanks All!
Im will be active!
Click to expand...
Click to collapse
I am having a similar problem. Whenever I try to update the ROM, the utility gets stuck at 0%. I've somehow managed to get to replace the 2.08 SPL to 3.03 and flash the stock ROM but even if I'm lucky enough for it to work, it still won't boot past the HTC logo.

Categories

Resources