Related
I tried using the shelltool to flash the faria rom and after the hard reset which was instructed, my phone hangs at the startup screen with:
IPL 2.22.0001
SPL 2.22.0001
GSM 02.25.11
OS 2.18.0.0
My G4 is CID-locked
When i connect it to the charger, the light doesnt light up
Please help
Can you still put your device to bootloader (Tri-color screen)..??
if so then you're lucky..
I in bootloader, (Tri-color screen) and how reflash my WIZARD?
go to bootloader (Tru-color screen)
just plug you device into USB.. if you've seen the "USB" word in your device..
reflash.. just run the ruu....exe..
Who ROM choice?
Test ROM RUU_Molski[1].Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2-G4 but my G4 still Stuck at startup
Flash with the Love Rom, it worked for me when this happened!
post your feedback after so that others having this problem will also know what to do..
--004
My device at this moment is also hanging in that cloudy startup-screen. Tanks to this topic I came to Bootloader. I had a original ROM of Qtek on my PC en now its installing...
I see the same thing when I did a ROM update last week. I see a statusbar at PC and device, they are growing. Pfiew Still my fingers crossed! Now at 95%! You will hear of me!
Device is back! Now I'll (still) try installing the ROM that I want!
Black-Rose said:
My device at this moment is also hanging in that cloudy startup-screen. Tanks to this topic I came to Bootloader. I had a original ROM of Qtek on my PC en now its installing...
I see the same thing when I did a ROM update last week. I see a statusbar at PC and device, they are growing. Pfiew Still my fingers crossed! Now at 95%! You will hear of me!
Device is back! Now I'll (still) try installing the ROM that I want!
Click to expand...
Click to collapse
yo can i have the link too where u got the orginal qtek rom i just want to make sure i got the right one
mrchezzy said:
yo can i have the link too where u got the orginal qtek rom i just want to make sure i got the right one
Click to expand...
Click to collapse
HI! I have the same problem with my Qtek9100, where can I donwload the original qtek rom?
same **** happened to me anyone kno where i could get the Love Rom from? would the button rom also? I tried the OEM rom I got an error message
You can find Wizard Love on ThePirateBay.
ANTC said:
same **** happened to me anyone kno where i could get the Love Rom from? would the button rom also? I tried the OEM rom I got an error message
Click to expand...
Click to collapse
Check here:
http://rapidshare.com/users/XP0AY2
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Please try the search button in this forum!!! And don't worry it's not bricked;-)
sayjeng said:
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Click to expand...
Click to collapse
check your .NET Framework and see if you have the 2.0 version installed. Reboot your pc and start again. We always experience these hiccoughs.
i've tried the search..
seriously saying, its quite hard to find what i want..
i seem to be able to flash the PV_TEMP ROM, it says on my computer its successful but my PDA just goes back to bootloader.
anyway, i'm installing .Net framework 2.0... will see how that goes..
still doesn't work..
RUU says its congratulations...
PDA goes back to bootloader
i cna flash jester's rom, i can flash PV_temps rom..
but all i get is the bootloader screen after that..
can't flash the NVID thats from the upgrade guide... it just says wrong NBF file..
wonder how much will it cost for me to send it to service center to replace the whole flash chip
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
sayjeng said:
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
Click to expand...
Click to collapse
so you know now what is the problem!
recharge it by connecting to a PC with USB and wait wait wait and hope for the best. Try recharging it by what ever means you can do. If you said, you are successful in getting PVtemp, then, try installing battery_status.cab (find it search it by google or whatever) and watch the battery_status line on the front page and wait for a + sign before the 100mA at the right bottom line to appear.
Wait till it is full, then redo step 2 again. I'm sure you can get over without getting the machine to the manufacturer for repair.
no no
the first problem still stands
i'm still stuck at bootloader..
but now i can't flash anything cause my batt is dead..
so i've got 2 problems now
hello all,
sayjeng, I got the same problem last week.
I couldn't use any RUU rom because of the corrupted nbf file.
The PV_TEMP rom worked but I was stuck on boot loader screen too...
I tried many times and with some random hard resets... Eventually, the fourth time , WM5 started...
My advice are :
- charge your battery by any means like SeaPea said
- reboot your desktop computer
- remove your (fully charged) battery from your phone for some seconds and put it back...
Really, I may have been lucky that time...
I just wanted to post here to say that I sympathize...
Good luck!
will give it a try tomorrow..
its past 1am now and i need to be up early tomorrow..
if it doesn't, really have to make a trip to service center..
wonder what should i tell them then..
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
sayjeng said:
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
Click to expand...
Click to collapse
me too....any progress?
Jow ... flash your rom from dopod!
If your Radio Rom is crashed ... it stuck at Bootscreen too! After that it must run! it fix partition errors too.
ROm from dopod is 2.15..
my prophet is now on 2.20...
i can't flash it... i haven't been able to find a vendor rom wiht 2.20..
does anyone have any ? Qtek maybe ?
something to get my prophet running...
cause i did try in my attempt to get my prophet back by flashing the Radio ROM.. and it fails.. maybe thats why i can't boot my prophet
tried almost every rom..
used almost every RUU
anyone got any RUU that might help ?
or any suggestions ? thinking of throwing the towel and just pass it to dopod for them to handle....
worst case, change ROM chip
finally
I got this to work using the guide - BUT:
Windows XP SP2 English was the key for me.
I used VMWare to do step 1 of flashing (NVID)
then step 2 of flashing I did on a separate PC.
Worked after so many different attempts
i am running on XP sp2 english.. not using vista..
problem is, i can't even hard reset my phone.. it just says Format is Failed.
but my phone seems fine and still responds to my plugging the USB in and reseting....
Hi sayjeng
The same problem with my imate jamin too..
Whatever you said in you posts is an exact recall of my case.
Now it makes two of us
Waiting to see if someone can come up with a solution.
IPL/SPL at 2.20
Frequent automatic disconnection from activesync.
No means to charge the battery which i think is almost dead.
Tried the Dopod rom,for no avail.
The list goes on and on just like yours.
help..Anyone..?
I have tried flashing about 3 different ROMS and they the RUU stops them at 99%. The bar on the phone goes RED.
Please dont get confused with my signature, the phone is a Wizard and is running SPL 2.16.001 (G4).
The phone remains in bootloader mode (Red Green Blue screen)
What do i do from now?
Just tried again and it stopped at 100% and then went RED.
Been reading on all wizrd forums, and I dont think this has happened before.. (Well I cant seem to read it anywhere).....
Any help would be much appreciated...
Thanx
From EquinoXe:
Soft SPL only allows you ONE update, so phone is CID unlocked only when Soft SPL is loaded.
It's normal for the RUU to stick on 99 % for a couple of minutes, The whole update will take aprox 10 minutes.
You can try the hard SPL from there you are semi-permanently CID unlocked.
Good luck,
EquinoXe
Thanx for your quick response...
After it goes red an error pops up with the option of recovering...
I have tried the RUU that came with the SoftSPL package and MUN's RUU...
i think even if its a red Bar its still updating. just wait.
hi, sorry if nobody responded before, i dont know if they did so i dont know if you are being sarcastic. Leave it. Literally. Put it on, and let it update until it says something else. dont cancel it or unplug it. leave it doing it. then if a PC error comes up copy it here. Simple as that
Flash back to your original stock ROM/Wizard Love ROM first, then use SSPL again and flash your next ROM.
starkwong said:
Flash back to your original stock ROM/Wizard Love ROM first, then use SSPL again and flash your next ROM.
Click to expand...
Click to collapse
Thanx! That Wizard Love ROM manages to do the trick!
I think some of the ROM's you did would of been fine. You just have to be patient. Let it do it, watch some TV while its doing it. Wait for the PC to give you a successful message or an error message!
I'm tooooooo , plz help meeeeeeeeeee
iuemne.com said:
I'm tooooooo , plz help meeeeeeeeeee
Click to expand...
Click to collapse
As already stated above, this is NORMAL phenomenon.
Whenever I flash a new ROM onto my wizard, it always reaches 99% quick, and then, seems to be stucked there for ages. No big deal.
Just wait, the bar turns red, so what? it doesn't matter. After a while, it will complete the 1% left that take so long. I don't know the reason either, but it doesn't affect the flashing, nor it does for the phone itself. You just have to wait, patiently.
G4 stuck at 99%
hi man,
i ahve a wizard G4, i tried to upgrade to TNT WM6.0 and in between flashing my power went out...now i'm not able to flash....the upgrade bar reaches 99% then goes to recovery mode...no other rom is flashable
please advise buddy
nash
The bar turning red is a very normal phenomenon... Basically to make this very simple for all who don't believe us or freak out every time you see a red bar, this is what your wizard is doing.
GREEN:: Rom is flashing
RED:: Rom flashing is TEMPORARILY paused while RUU adjusts it's speed to finish the job.
BLUE:: Rom flashing is complete.
My suggestion to all who are flashing roms and are too impatient to take your eyes off the screen: go smoke a cigarette or get a bite to eat out of the fridge or watch some TV or hell, go for a quick drive to the convenience store down the street to buy a pack of gum to kick your computer addiction. It works for cigarettes...
In other words... BE PATIENT. It is not the end of the world if it goes red. Now if it gives you an error message it's still not the end of the world. Just flash back to your carriers original rom or give it a little Wizard Love and then try again...
Best of luck to you all...
Just wait patiently when red bar is shown (Official meaning of red bar is adjusting write method of flash memory).
It may stuck at 100% with red bar for as long as 5 minutes.
I got the same probleme with my trinity, RUU got stuck at 99% and then I get an update error from RUU and I can't flash nor restore any flash !
I am now stuck in bootloader and looking for a real solution, what can I do to have a working rom !?
same problem
I have a qtek 9100 and still 99%, but now, dosent respond, i tried soft and hard reset but only i have a black screen, no lights... nothing...
I removed the batery for a day... but still black..
Pleeeease.. Help me.
thanks
Hello, I have a problem with my HTC HD2, it doesn't want to start. When I press the power button I feel only a tiny vibration, but only when the device is connected to a power source. Without power source it won't do anything.
Things that I've done : The phone was stuck in bootloader with the error "Upgrade ROM Code Error , Please try again", it had SPL 2.08.0000 so I've flashed HSPL 2.08. After that my device wouldn't start.
Things that I've tried : Take the battery away from the device , connect the device to a power supply,wait 5 minutes then put the battery back on.
Hard-Reset.
Tried to enter bootloader.
Also tried to flash the stock rom, before flashing HSPL 2.08. My device was stuck at 0% with no progress what so ever.
Please help !
hello
I just both a new HD2 from Amazon and the thing don't want to start.
I started first time and it crashed at the training for keyboard. I removed the battery and it didn't want to start again. I did the reset, hard reset but it stay with a white screen and htc logo on. Is not doing anything.
I tried also to start it without SD-card and phone card but no change.
What to do should I send it back????
thank you.
NeXuSqtek said:
Hello, I have a problem with my HTC HD2, it doesn't want to start. When I press the power button I feel only a tiny vibration, but only when the device is connected to a power source. Without power source it won't do anything.
Things that I've done : The phone was stuck in bootloader with the error "Upgrade ROM Code Error , Please try again", it had SPL SPL 2.08.0000 so I've flashed HSPL 2.08. After that my device wouldn't start.
Things that I've tried : Take the battery away from the device , connect the device to a power supply,wait 5 minutes then put the battery back on.
Hard-Reset.
Tried to enter bootloader.
Also tried to flash the stock rom, before flashing HSPL 2.08. My device was stuck at 0% with no progress what so ever.
Please help !
Click to expand...
Click to collapse
battery out, connect to wall charger and turn charger on, insert battery, dont touch it for a good half hour. dont worry if charging light doesnt come on straight away.
It sounds like the battery is possibly over discharged. doing as i listed 'should' let the phone start charging without trying to turn itself on.
ktod_16 said:
hello
I just both a new HD2 from Amazon and the thing don't want to start.
I started first time and it crashed at the training for keyboard. I removed the battery and it didn't want to start again. I did the reset, hard reset but it stay with a white screen and htc logo on. Is not doing anything.
I tried also to start it without SD-card and phone card but no change.
What to do should I send it back????
thank you.
Click to expand...
Click to collapse
yes send it back, silly to try and fix an error with a brand new phone. (Also, hijacking threads is considered bad manners. )
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Hi!Unfortunately i have a big problem with my hd2.I have hacked it with hspl3.I have it 4 months now and i have flash to it about 10 roms.After i flashed the last rom suddenly my hd2 closed and when i opened it showed a white screen.I tried
to do reset to last official greek rom of htc(HD2_RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)changing the name of RUU_signed.nbh to LEOIMG.nbh and put it in to sd card.And in 5% shows me "update terminate,update fail,radio v2 fail" and then when it starts shows white screen again.I can get only in bootable mode (that mens in the screen with the colors ni wich you can see wich spl you have)How can i fix my hd2 pls?
NeXuSqtek said:
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Click to expand...
Click to collapse
it's highly unlikely, but as with anything of this nature nothing is foolproof
elgeor said:
Hi!Unfortunately i have a big problem with my hd2.I have hacked it with hspl3.I have it 4 months now and i have flash to it about 10 roms.After i flashed the last rom suddenly my hd2 closed and when i opened it showed a white screen.I tried
to do reset to last official greek rom of htc(HD2_RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)changing the name of RUU_signed.nbh to LEOIMG.nbh and put it in to sd card.And in 5% shows me "update terminate,update fail,radio v2 fail" and then when it starts shows white screen again.I can get only in bootable mode (that mens in the screen with the colors ni wich you can see wich spl you have)How can i fix my hd2 pls?
Click to expand...
Click to collapse
bad news for you i'm afraid. i'm not aware of any successful fixing of radio update error.
Ok,thanks, I hope that the battery is the source of this problem,not the device .
I went today at a local service,they've told me that the battery is 100% charged. Unfortunately the problem is with my HD2. I left it in service and I will pick it up tomorrow repaired I hope. Thank you for helping me.
NeXuSqtek said:
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Click to expand...
Click to collapse
YOU GOT WRONG HSPL you should have 2.08. 6666 etc not 0000... I hope this helps
Nice thread
netvpn7 said:
YOU GOT WRONG HSPL you should have 2.08. 6666 etc not 0000... I hope this helps
Click to expand...
Click to collapse
I knew I made a mistake, my question now is can it be fixed ?
Hi, I tried to instal Android 2.3 Gingerbread on my htc hd2 but when I installed MAGLDR it stopped working. I realized I had installed the wrong HSPL, but now it won't start or respond to a USB connection. I can't turn it on or off and it only shows a white image with HTC on it....Does someone know how to help?
Greetzz
pull battery, restart into bootloader, apply 2.08.hspl,restart.
My HD2, won't start up.
My plan was to remove an ICS rom, but during my reinstallation of an other rom everything got deleted..
Now my problem, it won't load into MAGLDR, I do have HSPL 2.08 etc.
Does someone have an idea?
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Mark-- said:
My HD2, won't start up.
My plan was to remove an ICS rom, but during my reinstallation of an other rom everything got deleted..
Now my problem, it won't load into MAGLDR, I do have HSPL 2.08 etc.
Does someone have an idea?
Click to expand...
Click to collapse
Finally I was able to load my HD2 into MAGLDR so problem solved..