I tried using the shelltool to flash the faria rom and after the hard reset which was instructed, my phone hangs at the startup screen with:
IPL 2.22.0001
SPL 2.22.0001
GSM 02.25.11
OS 2.18.0.0
My G4 is CID-locked
When i connect it to the charger, the light doesnt light up
Please help
Can you still put your device to bootloader (Tri-color screen)..??
if so then you're lucky..
I in bootloader, (Tri-color screen) and how reflash my WIZARD?
go to bootloader (Tru-color screen)
just plug you device into USB.. if you've seen the "USB" word in your device..
reflash.. just run the ruu....exe..
Who ROM choice?
Test ROM RUU_Molski[1].Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2-G4 but my G4 still Stuck at startup
Flash with the Love Rom, it worked for me when this happened!
post your feedback after so that others having this problem will also know what to do..
--004
My device at this moment is also hanging in that cloudy startup-screen. Tanks to this topic I came to Bootloader. I had a original ROM of Qtek on my PC en now its installing...
I see the same thing when I did a ROM update last week. I see a statusbar at PC and device, they are growing. Pfiew Still my fingers crossed! Now at 95%! You will hear of me!
Device is back! Now I'll (still) try installing the ROM that I want!
Black-Rose said:
My device at this moment is also hanging in that cloudy startup-screen. Tanks to this topic I came to Bootloader. I had a original ROM of Qtek on my PC en now its installing...
I see the same thing when I did a ROM update last week. I see a statusbar at PC and device, they are growing. Pfiew Still my fingers crossed! Now at 95%! You will hear of me!
Device is back! Now I'll (still) try installing the ROM that I want!
Click to expand...
Click to collapse
yo can i have the link too where u got the orginal qtek rom i just want to make sure i got the right one
mrchezzy said:
yo can i have the link too where u got the orginal qtek rom i just want to make sure i got the right one
Click to expand...
Click to collapse
HI! I have the same problem with my Qtek9100, where can I donwload the original qtek rom?
same **** happened to me anyone kno where i could get the Love Rom from? would the button rom also? I tried the OEM rom I got an error message
You can find Wizard Love on ThePirateBay.
ANTC said:
same **** happened to me anyone kno where i could get the Love Rom from? would the button rom also? I tried the OEM rom I got an error message
Click to expand...
Click to collapse
Check here:
http://rapidshare.com/users/XP0AY2
Related
dear all friends
i have wiza200 k-jam it was work with love rom then i try to flash e it with shelltoll with RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship
and then phone hange in phone screen ibl and sple it can go to boot mode
but how can reflash it. it cant accepte update so please help me how can i revive it please tell me .
iam waiting help .
put the device in bootloader mode and flash the latest rom from your carrier quick!!!! before the battery drains out.
holding down the camera button then press the soft reset whole..
that should bring you to bootloader.. then flash!
Faria
Greetings,
Faria if in this case the battery drains totally the phone wont revive?
Thanks.
samy.3660 said:
Greetings,
Faria if in this case the battery drains totally the phone wont revive?
Thanks.
Click to expand...
Click to collapse
Yes if the battery drains and the phone has no OS it is not capable of recharging the battery as this is controlled by software not hardware, an external charger would be needed to charge the battery and then flash the phone.
i charge battry with power suplly nd phone goes into flash mode but whats tool can i flash it with the update not work i have usb cable without charger .iam waiting steps to riveve it please give me link for any tool and flash files and steps .
and very thanks for all replay
waleed2 said:
i charge battry with power suplly nd phone goes into flash mode but whats tool can i flash it with the update not work i have usb cable without charger .iam waiting steps to riveve it please give me link for any tool and flash files and steps .
and very thanks for all replay
Click to expand...
Click to collapse
the tool you need to current revive your device is the latest official rom from your provider.....t-mobile- orange ?
link for wizard love rom
here is a link for the wizard love rom you will be able to flash your device using it get most people out of trouble the once charged can use the shell tool again
http://rapidshare.com/users/EXGZ7T you will find it a the bottom of the page
i have the love rom but i cant flash it i see this errore
so what can i do iam waiting it was love rom isdie it it before hange with shelltool
thanks to all the wizard now back to live but i have same problem it has simlock ans isee in the screen you have tried 9times please retry
so how can i slove this probem
My Wizard
I tryed to change the rom of my wizard do WM6. Now i can see the Bootscreen with T-Mobile but then nothing more comes. So i tryed to role back an older Rom vor my MDA. But i get the same error-message like the guy before.
So what can i do?
worker2000 said:
I tryed to change the rom of my wizard do WM6. Now i can see the Bootscreen with T-Mobile but then nothing more comes. So i tryed to role back an older Rom vor my MDA. But i get the same error-message like the guy before.
So what can i do?
Click to expand...
Click to collapse
I got it. Its working again. But I want Windows Mobile 6. So if someone can give me a clou how to change the rom and where I can find a ROM for G4 that would be great.
THX
Ok, so I tried to flash my G4 wizard to wm6, went all the way through the flash, got to 99% and stopped, giving me a comm error. I did the recovery and im in an endless flash to 99% loop. When I turn it on, I get the bootloader (3 stripe) screen, with the following:
RUU upper right corner
IPL 2.25.0001
SPL 2.25.0001
USB lower left corner.
I have spent the last 4 hours reading posts and cannot fix this thing. Any help would be greatly appreciated.
did u flash it back to carrier rom?
Flash it back to the original carrier ROM (should be available on the website) and then use ShellTool to flash the ROM. make sure that you follow the instructions exactly, otherwise, you will end up with a bricked rom.
-Nstefanelli-
The only rom I can find on Cingular's web site, once downloaded says its corupted, and I cant find one on XDA at all. Anybody know where else I might find one?
Wizard Love rom is another one you could try.
Wizard Love got me goin again, I love me some wizard.
Thanks for the help guys!!!
Same Problem I Have Faced.... And Also Solved.
u have Radio Rom problem....
search the latest radio rom and upload to your rom... and restart your pda...
reply me..... sooon because same problem i had faced and solved also.
Same problem
I was having the same problem yesterday. Eventually i got it to work again. It was a little confusing though because i used the rom from the HTC website to get it up and running again with wm5 and then used ShellTool from the sticky in this forum to flash it with a wm6 rom. From what i gather it's because my phone was CID locked, something that none of the roms include in their instructions to watch out for. Maybe a sticky in the forum for newbs like me containing things to watch out for while flashing roms?
A side note:
I had to download the rom from the HTC site twice in order for it to flash back to the original OS. The first time i downloaded the rom i kept getting an error. I guess it was a bad download or something but the second one worked in the first shot.
think i bricked my wizard
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
There is no help for you if you did flash a non-official G3 rom onto your phone.
Recent Official carrier releases are the only roms that contain bootloaders that are safe to flash into a G4. (Note older carrier releases could possibly fry your phone as well as they may not contain G4 bootloaders)
If you flashed a custom rom with IPL/SPL your device is done for good.
Though you said it went to the bootloader prior to going dark so you may just have a dead battery and a bad flash. Get a battery from a friend or buy one and then see if the device will power on. If you can't get it to power on with a known good battery then it is most likely fried. If it does boot at least to bootloader then you should be able to recover your device. Most chargers will not charge the battery of your phone unless the phone is fully booted into windows. So it is very important to have a contingency plan in case of a bad flash with these phones as playing/troubleshooting while trying to recover from a bad flash will drain your battery possibly leaving you with not enough juice to complete a flash.
hi zzan
thanks for the reply, i think your right about the battery it actually turns on for about 10 seconds now into bootloader but then the battery dies again so i gonna source a battery.
gripper said:
oops !!!!
think i flashed a g3 rom onto my g4 wizard and for a while it stayed in bootloader screen (tricolour) now the wizard is dead with no charging light when plugged in and performing hard reset does nothing
please help !!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
gripper said:
hi madcap,
not looking good i toook it to a phone engineer and he says it is corrupt ? he has tried flashing it, apparently there is a guy who will put in a new chip ? i am such a fool i bricked my phone just to get rid of o2 stuff !!!!!
Click to expand...
Click to collapse
A new chip?!?!??
The problem is the in the IPL area which can now be flashed only via JTAG (cable system that doesn't require booting files since it operates directly on the chip)
Take it to an official repair.
Hi,
I have almost the same problem. I tried to flash to WM6.1 for wizzard, it got to 99% and failed (connection lost). I then tried the recovery process but that didnt work.
Now I can boot to the booloader, and see the IPL/SPL versions (2.25.0001) and can see USB on the lower left. But , it is not making a connection to my PC. None of the RUU, ROMS, HardSPL, or SoftSPL apps can connect to it.
They all report some connection error, "Device not found", or "Connection Error 264"...
I have read a bunch on this forum, and tried alot of stuff but nothing worked.
I started up my own thread on my issue, but hope someone could help me, help someone else in the process here..
How can I get this thing flashable again?
Thanks
Madcap180 said:
Remove the battery for about 5 minutes, then put it back in.. then try booting in bootloader mode <tri color screen> .. then flash with an OFFICIAL Carrier ROM ..
I flashed my hermes yesterday <changing the spl and stuff> and it was dead for a little bit, until I took the battery out and put it back in.. <for some reason it was like a de-fibrilator..>
Try that.
Click to expand...
Click to collapse
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
end123 said:
This worked for me and now I can connect the apps to the phone again. But after I try to install the default rom, everytime at 80% it looses the connection again.. .
Anyone know a good WM6.1 rom that works with 8125 G4
Click to expand...
Click to collapse
Fully recharge your battery, then try to flash again. Low/dead/misreporting battery will kill a flash as surely as disconnecting the cable in mid-flash. Oh, and try WizFlo...really cool! (I had to fiddle with the Opera Browser install to get the Internet connection to work correctly, but who cares, it was worth it!)
Please ignore, sorted now.
Was trying to upgrade a new WM6 rom and it kept getting stuck @ 99%
Went through the recovery process and it was fine the first time but the second time Activesync stopped finding the device so I've got no communication between the Phone (XDA Mini S Wiza200) and the PC.
Can anyone help. I tried removing the battery but still starts up the same, just the red, green and blue screen with this on.
IPL 2.21.0001
SPL 2.21.0001
Is it a brick or is there anything I can do to recover it.
Thanks for any help.
Problem resolved, thanks.
might be worth posting how you fixed incase other members hit the same thing
glad you got it fixed
it's always the same...this 3-colored screen is a bootloader mode...it's always showing after something go bad during update process...u just need to flash another working rom or install wizard love rom which is the best solution. i think that u couldnt install this rom (wm6) cause you didnt used hardSPL or softSPL...wish u good luck with updating madness heh.
qtek whith red green and blue screen
Hi,
Where can i download wizard love rom file ?
My new qtek have same screen
Tanks
kayzerrr said:
it's always the same...this 3-colored screen is a bootloader mode...it's always showing after something go bad during update process...u just need to flash another working rom or install wizard love rom which is the best solution. i think that u couldnt install this rom (wm6) cause you didnt used hardSPL or softSPL...wish u good luck with updating madness heh.
Click to expand...
Click to collapse
Here you are:
http://forum.xda-developers.com/showpost.php?p=1153707&postcount=206
Hi guys,is possible reanimate the camera died after a bad flash (3 bad flash for precision),all whit WWE/eng image.
is possible If the bad flash is the cause??
Btw the phone work 100% in all other function (phone,screen,bt etc)
thanks for all...
No one help me??
thanks.
flash again
franko0 said:
Hi guys,is possible reanimate the camera died after a bad flash (3 bad flash for precision),all whit WWE/eng image.
is possible If the bad flash is the cause??
Btw the phone work 100% in all other function (phone,screen,bt etc)
thanks for all...
Click to expand...
Click to collapse
Try to flash it again with good rom, llok in threads here, is explained several times which rom to use. http://forum.xda-developers.com/showthread.php?t=353547
franko0 said:
Hi guys,is possible reanimate the camera died after a bad flash (3 bad flash for precision),all whit WWE/eng image.
is possible If the bad flash is the cause??
Btw the phone work 100% in all other function (phone,screen,bt etc)
thanks for all...
Click to expand...
Click to collapse
If you want any help, please simplt state more detail to your problem......
like... which rom you had done with...
what is the model of your phone,
all whit???
please..
dioxda2 said:
If you want any help, please simplt state more detail to your problem......
like... which rom you had done with...
what is the model of your phone,
all whit???
please..
Click to expand...
Click to collapse
Hi dioxda2,thansk for reply.
I don't know the version flashed on dopod because i buy it used.
My phone is dopod 818pro aka s200 or prohet.
currently in the phone is installed this rom (unknow)
rom version 2.20.7.34 wwe
rom date 7/10/06
radio 02.69.21
protocol 4.1.13.30
extrom 2.20.7.114
model name pm300
maybe i know the current installer rom mailing the seller,if i know it i reply to you.
Hope this help you,and me
regards
can some one help me please?
franko0 said:
can some one help me please?
Click to expand...
Click to collapse
tell us about what exactly your problem is, how dead is your camera?
Hi,when i push the camera button the pointer run but no camera appears.
is a hawdware or software problem?
franko0 said:
Hi,when i push the camera button the pointer run but no camera appears.
is a hawdware or software problem?
Click to expand...
Click to collapse
First, you've got to make sure the button mapping......
Please go start menu >>> settings >> personal >> button....
and look for the pointed function...
sometimes you need to deselected and then select again
if you are an advanced user, go to the windows folder and try to start camera directly from there....
and sort out what is going on.....
Hi,thanx for reply.
Button remapped but not work.
Go to programs and tap the camera icon and not work,pointer run but nothing appears.
Btw i try to flash hardspl whit prophet tool 2.8,the flash appears ok but when the device reboot 3 color screan appears..
try to flash some images but same thing...3 color screen...
finally i reanimate the pda whit NVID_RUU and the pda is ok but is the same image found when i buy the pda...i think the last owner try the same procedure to flash but whitout success....and the camera still not work...
any suggestion??
regards
franko0 said:
Hi,thanx for reply.
Button remapped but not work.
Go to programs and tap the camera icon and not work,pointer run but nothing appears.
Btw i try to flash hardspl whit prophet tool 2.8,the flash appears ok but when the device reboot 3 color screan appears..
try to flash some images but same thing...3 color screen...
finally i reanimate the pda whit NVID_RUU and the pda is ok but is the same image found when i buy the pda...i think the last owner try the same procedure to flash but whitout success....and the camera still not work...
any suggestion??
regards
Click to expand...
Click to collapse
1. Force bootloader mode MANUALLY ( SEE THE STICKY POST #1 [FROM MY THREAD] http://forum.xda-developers.com/showthread.php?t=353547,
2. FOLLOW THE PROCEDURES THERE,
3. AND BE SURE THAT YOUR HARDSPL IS REALLY DONE... JUST READ POST 1 THERE IS OK ..
'
Hi dioxda2,my dopod seems to not upgradable.
trying to flash spl whit some tools but remain 2.20.0001....hard and soft spl...soft spl seem to work better but when i flash a new rom all is ok on the screen but when pda reboot froozen on the first page (qtek,clouds and number version) all is the same whit all rom i tried but only the OS version change (10.0.0.0 or 7.0.0.7)...
any ideas??
1. download any rom from me,
2. active sync your prophet,
3. unzip my zip file with the password dioxda2 if asked,
4. double tap " upgrade "
5. follow the on screen dos instructions,
6. when you see the % process bar, just wait then,
7. let it stay connected with the PC until you see the "after hardreset screen",
8. DONE!!!!!
GOOD LUCK!!!!!
Hi dioxda2,downloaded all you roms and try 3 of 5.
All 3 rom say flash is ok but when pda reboot still in first page like all other rom i tryed...
is a bad block on my dopod or what??
put it on trashcan???
why only NVID_RUU flash ok????
thanx for you patience
regards
No way, i decide to destroy my dopod,is not possible upgrade any kind of rom,only ruu and orange rom are accepted by this piece of s**t.....
thanks anyway to dioxda2,your patience is very appreciate.
c ya.
franko0 said:
No way, i decide to destroy my dopod,is not possible upgrade any kind of rom,only ruu and orange rom are accepted by this piece of s**t.....
thanks anyway to dioxda2,your patience is very appreciate.
c ya.
Click to expand...
Click to collapse
sorry.....
noprob dioxda2,thanks for all..
i want to know this....why only ruu_rom and orange rom is able to flash on my dopod??
why radiorom and splashscreen flash ok and spl and roms not??
c ya!
The same is here!
Hi to all PDA masters there
I'm having exactly the same problem as above...My Dopod 818 G3 can't be upgraded with any Roms...It only works with NVID-RUU....With any other Roms,it stuck in the second splash screen....And with Nvid-RUU, the camera never works!!!With thanks to dioxda2 and Rondol1 who already tried to help me, I wanted to see if any one has got the same experience or not?..I aslo wanted to know it it's caused by a hardware problem,or it's a sort of software affect
So your camera got any problem before you upgrade to the new rom?? If your camera got that problem before upgrade, then your camera's problem, but no problem before flashing, then your ROM's problem. Try to search another stable rom for your dopod!
Good Luck!
after some truobles updated my leo to original htcrom realease to 3.14 rom
only problem is i have spl3.0.000 on it
now i cant get anything done someone here to help me?
i cant get to change the spl anymore
everytime i get a bad connection with usb
i use win vista
ikkeenjij36 said:
after some truobles updated my leo to original htcrom realease to 3.14 rom
only problem is i have spl3.0.000 on it
now i cant get anything done someone here to help me?
i cant get to change the spl anymore
everytime i get a bad connection with usb
i use win vista
Click to expand...
Click to collapse
On the latest Stock Rom 3.14 you can't change your SPL version neater used HSPL.
But what is your question/problem.
I mean you mention " i cant get anything done" what will you do???
hi thnx for your reaction
i meant that i cant flash a cooked rom or either the original rom from htc everytime i get your uusb connection is not ok?
plse help i am desperate after 2 weeks of trying
ikkeenjij36 said:
hi thnx for your reaction
i meant that i cant flash a cooked rom or either the original rom from htc everytime i get your uusb connection is not ok?
plse help i am desperate after 2 weeks of trying
Click to expand...
Click to collapse
Hmm, strange that part of "USB problem"
But if you will install custom Rom on Stock Rom 3.14 you need to use SSPL_RUU.exe
But this will not solved your problem about USB connection.
have you alway's this problem, ore only when you try to install a Rom that you received ERROR 26 connection problem?
if install stock rom then stil i keep spl 3,0,000
rest it runs fine then
dont know where i can get that spl prog
i will try everything by now
the usb problem only gets with updating a rom
ikkeenjij36 said:
if install stock rom then stil i keep spl 3,0,000
rest it runs fine then
dont know where i can get that spl prog
i will try everything by now
the usb problem only gets with updating a rom
Click to expand...
Click to collapse
If you will return to previous SPL version flash previous stock rom 1.66 ore 1.74 over SD! (check on the HTC webpage by using your S/N with one is your's if you aren't sure.)
i tried it but i keep getting error 260 cant connect chechk usb or cradle?
tried to flash it from sd doesnt work either
tried using sspl_ruu.exe but it starts up and when i get the start screen it says update to version ***** but on the top the currebt version is empty?is this bad?
when i start it anyway it starts in the update screen also in my phone but dont get further than 0% and then says connection error?
please help me
it finally worked with ssplruuu.exe
only som roms dont work can anyone advise on a good rom with dutch language please(maybe some dutch members?)
ikkeenjij36 said:
it finally worked with ssplruuu.exe
only som roms dont work can anyone advise on a good rom with dutch language please(maybe some dutch members?)
Click to expand...
Click to collapse
I'm a dutch member sir, and I use Artemis rom. Very fast/stable and available in dutch.
Ow PS version v.40.0 is build fore Stock Rom 3.14 and works well.
Here is the link to the thread.
tried to flash that one doesnt work goes in to bootloader and then nothing error 260
again problem with connection
only roms working
are 1 from leo energy and one from cruzer 4th rest get the same problem
any chance of solving this?
when i hold vol down during start up i still gett spl 3.03.000000
exept with the 2 roms but every time it starts it goes into bootloader with spl1.42.6666 exept with those 2 roms?
can we pm ass well?
maybe quiker and own language
ikkeenjij36 said:
tried to flash that one doesnt work goes in to bootloader and then nothing error 260
again problem with connection
only roms working
are 1 from leo energy and one from cruzer 4th rest get the same problem
any chance of solving this?
when i hold vol down during start up i still gett spl 3.03.000000
exept with the 2 roms but every time it starts it goes into bootloader with spl1.42.6666 exept with those 2 roms?
can we pm ass well?
maybe quiker and own language
Click to expand...
Click to collapse
I send you just a PM let me know.