after some truobles updated my leo to original htcrom realease to 3.14 rom
only problem is i have spl3.0.000 on it
now i cant get anything done someone here to help me?
i cant get to change the spl anymore
everytime i get a bad connection with usb
i use win vista
ikkeenjij36 said:
after some truobles updated my leo to original htcrom realease to 3.14 rom
only problem is i have spl3.0.000 on it
now i cant get anything done someone here to help me?
i cant get to change the spl anymore
everytime i get a bad connection with usb
i use win vista
Click to expand...
Click to collapse
On the latest Stock Rom 3.14 you can't change your SPL version neater used HSPL.
But what is your question/problem.
I mean you mention " i cant get anything done" what will you do???
hi thnx for your reaction
i meant that i cant flash a cooked rom or either the original rom from htc everytime i get your uusb connection is not ok?
plse help i am desperate after 2 weeks of trying
ikkeenjij36 said:
hi thnx for your reaction
i meant that i cant flash a cooked rom or either the original rom from htc everytime i get your uusb connection is not ok?
plse help i am desperate after 2 weeks of trying
Click to expand...
Click to collapse
Hmm, strange that part of "USB problem"
But if you will install custom Rom on Stock Rom 3.14 you need to use SSPL_RUU.exe
But this will not solved your problem about USB connection.
have you alway's this problem, ore only when you try to install a Rom that you received ERROR 26 connection problem?
if install stock rom then stil i keep spl 3,0,000
rest it runs fine then
dont know where i can get that spl prog
i will try everything by now
the usb problem only gets with updating a rom
ikkeenjij36 said:
if install stock rom then stil i keep spl 3,0,000
rest it runs fine then
dont know where i can get that spl prog
i will try everything by now
the usb problem only gets with updating a rom
Click to expand...
Click to collapse
If you will return to previous SPL version flash previous stock rom 1.66 ore 1.74 over SD! (check on the HTC webpage by using your S/N with one is your's if you aren't sure.)
i tried it but i keep getting error 260 cant connect chechk usb or cradle?
tried to flash it from sd doesnt work either
tried using sspl_ruu.exe but it starts up and when i get the start screen it says update to version ***** but on the top the currebt version is empty?is this bad?
when i start it anyway it starts in the update screen also in my phone but dont get further than 0% and then says connection error?
please help me
it finally worked with ssplruuu.exe
only som roms dont work can anyone advise on a good rom with dutch language please(maybe some dutch members?)
ikkeenjij36 said:
it finally worked with ssplruuu.exe
only som roms dont work can anyone advise on a good rom with dutch language please(maybe some dutch members?)
Click to expand...
Click to collapse
I'm a dutch member sir, and I use Artemis rom. Very fast/stable and available in dutch.
Ow PS version v.40.0 is build fore Stock Rom 3.14 and works well.
Here is the link to the thread.
tried to flash that one doesnt work goes in to bootloader and then nothing error 260
again problem with connection
only roms working
are 1 from leo energy and one from cruzer 4th rest get the same problem
any chance of solving this?
when i hold vol down during start up i still gett spl 3.03.000000
exept with the 2 roms but every time it starts it goes into bootloader with spl1.42.6666 exept with those 2 roms?
can we pm ass well?
maybe quiker and own language
ikkeenjij36 said:
tried to flash that one doesnt work goes in to bootloader and then nothing error 260
again problem with connection
only roms working
are 1 from leo energy and one from cruzer 4th rest get the same problem
any chance of solving this?
when i hold vol down during start up i still gett spl 3.03.000000
exept with the 2 roms but every time it starts it goes into bootloader with spl1.42.6666 exept with those 2 roms?
can we pm ass well?
maybe quiker and own language
Click to expand...
Click to collapse
I send you just a PM let me know.
Related
I tried using the shelltool to flash the faria rom and after the hard reset which was instructed, my phone hangs at the startup screen with:
IPL 2.22.0001
SPL 2.22.0001
GSM 02.25.11
OS 2.18.0.0
My G4 is CID-locked
When i connect it to the charger, the light doesnt light up
Please help
Can you still put your device to bootloader (Tri-color screen)..??
if so then you're lucky..
I in bootloader, (Tri-color screen) and how reflash my WIZARD?
go to bootloader (Tru-color screen)
just plug you device into USB.. if you've seen the "USB" word in your device..
reflash.. just run the ruu....exe..
Who ROM choice?
Test ROM RUU_Molski[1].Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2-G4 but my G4 still Stuck at startup
Flash with the Love Rom, it worked for me when this happened!
post your feedback after so that others having this problem will also know what to do..
--004
My device at this moment is also hanging in that cloudy startup-screen. Tanks to this topic I came to Bootloader. I had a original ROM of Qtek on my PC en now its installing...
I see the same thing when I did a ROM update last week. I see a statusbar at PC and device, they are growing. Pfiew Still my fingers crossed! Now at 95%! You will hear of me!
Device is back! Now I'll (still) try installing the ROM that I want!
Black-Rose said:
My device at this moment is also hanging in that cloudy startup-screen. Tanks to this topic I came to Bootloader. I had a original ROM of Qtek on my PC en now its installing...
I see the same thing when I did a ROM update last week. I see a statusbar at PC and device, they are growing. Pfiew Still my fingers crossed! Now at 95%! You will hear of me!
Device is back! Now I'll (still) try installing the ROM that I want!
Click to expand...
Click to collapse
yo can i have the link too where u got the orginal qtek rom i just want to make sure i got the right one
mrchezzy said:
yo can i have the link too where u got the orginal qtek rom i just want to make sure i got the right one
Click to expand...
Click to collapse
HI! I have the same problem with my Qtek9100, where can I donwload the original qtek rom?
same **** happened to me anyone kno where i could get the Love Rom from? would the button rom also? I tried the OEM rom I got an error message
You can find Wizard Love on ThePirateBay.
ANTC said:
same **** happened to me anyone kno where i could get the Love Rom from? would the button rom also? I tried the OEM rom I got an error message
Click to expand...
Click to collapse
Check here:
http://rapidshare.com/users/XP0AY2
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Please try the search button in this forum!!! And don't worry it's not bricked;-)
sayjeng said:
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Click to expand...
Click to collapse
check your .NET Framework and see if you have the 2.0 version installed. Reboot your pc and start again. We always experience these hiccoughs.
i've tried the search..
seriously saying, its quite hard to find what i want..
i seem to be able to flash the PV_TEMP ROM, it says on my computer its successful but my PDA just goes back to bootloader.
anyway, i'm installing .Net framework 2.0... will see how that goes..
still doesn't work..
RUU says its congratulations...
PDA goes back to bootloader
i cna flash jester's rom, i can flash PV_temps rom..
but all i get is the bootloader screen after that..
can't flash the NVID thats from the upgrade guide... it just says wrong NBF file..
wonder how much will it cost for me to send it to service center to replace the whole flash chip
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
sayjeng said:
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
Click to expand...
Click to collapse
so you know now what is the problem!
recharge it by connecting to a PC with USB and wait wait wait and hope for the best. Try recharging it by what ever means you can do. If you said, you are successful in getting PVtemp, then, try installing battery_status.cab (find it search it by google or whatever) and watch the battery_status line on the front page and wait for a + sign before the 100mA at the right bottom line to appear.
Wait till it is full, then redo step 2 again. I'm sure you can get over without getting the machine to the manufacturer for repair.
no no
the first problem still stands
i'm still stuck at bootloader..
but now i can't flash anything cause my batt is dead..
so i've got 2 problems now
hello all,
sayjeng, I got the same problem last week.
I couldn't use any RUU rom because of the corrupted nbf file.
The PV_TEMP rom worked but I was stuck on boot loader screen too...
I tried many times and with some random hard resets... Eventually, the fourth time , WM5 started...
My advice are :
- charge your battery by any means like SeaPea said
- reboot your desktop computer
- remove your (fully charged) battery from your phone for some seconds and put it back...
Really, I may have been lucky that time...
I just wanted to post here to say that I sympathize...
Good luck!
will give it a try tomorrow..
its past 1am now and i need to be up early tomorrow..
if it doesn't, really have to make a trip to service center..
wonder what should i tell them then..
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
sayjeng said:
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
Click to expand...
Click to collapse
me too....any progress?
Jow ... flash your rom from dopod!
If your Radio Rom is crashed ... it stuck at Bootscreen too! After that it must run! it fix partition errors too.
ROm from dopod is 2.15..
my prophet is now on 2.20...
i can't flash it... i haven't been able to find a vendor rom wiht 2.20..
does anyone have any ? Qtek maybe ?
something to get my prophet running...
cause i did try in my attempt to get my prophet back by flashing the Radio ROM.. and it fails.. maybe thats why i can't boot my prophet
tried almost every rom..
used almost every RUU
anyone got any RUU that might help ?
or any suggestions ? thinking of throwing the towel and just pass it to dopod for them to handle....
worst case, change ROM chip
finally
I got this to work using the guide - BUT:
Windows XP SP2 English was the key for me.
I used VMWare to do step 1 of flashing (NVID)
then step 2 of flashing I did on a separate PC.
Worked after so many different attempts
i am running on XP sp2 english.. not using vista..
problem is, i can't even hard reset my phone.. it just says Format is Failed.
but my phone seems fine and still responds to my plugging the USB in and reseting....
Hi sayjeng
The same problem with my imate jamin too..
Whatever you said in you posts is an exact recall of my case.
Now it makes two of us
Waiting to see if someone can come up with a solution.
IPL/SPL at 2.20
Frequent automatic disconnection from activesync.
No means to charge the battery which i think is almost dead.
Tried the Dopod rom,for no avail.
The list goes on and on just like yours.
help..Anyone..?
Hi Guyz
I'm trying to upgrade my friends O2 ATOM to any new software .
the problem is that when it reaches RADIO UPDATE
it stays on 0%
PDA Screen says ( UPDATE RADIO STACK ,,,, PLEASE WAIT ... )
IF I REMOVE THE USB CONNECTION , THE ATOM STICKS ON WINDOWS SCREEN , AND SOMETIMES ON SCREEN ALIGNMENT .
i tried three different roms ad got the same result , even thru BOOTLOADER screen, it is very imbarresing , as i promised him a better performance device , now it is not booting .
hhhheeeellllppppp
pleaseeee
he is looking at me and only flames are showing from his eyes
just keep flashing the device, it fails sometimes on the first flash at the radio section, simply disconnect it and then reflash it for the 2nd time.
How long you've wait the process?
I've upgrade my atom more then 10 times and when in Radio Updates it's also not showing the progress as what you've seen.
But it doesn't mean the process is stopping. Just wait and the process will finished. (Usually in it shows the progress in your PDA screen)
Don't unplug your usb cable before it finished.
unfortunatly i had to unplug the ATOM
now it gives only one massege
UPDATE UTILITY
did i brick it ?
for me, I'd take out battery a while and then connect USB and try to flash with wm5 rom like "Xda-Atom-ENG-20060105" (you can found on this forum under "Collection of All O2 XDA ATOM ROM AKU *** (WM5(2*->3*) & WM6 (0.3*->0.7*))" post).
And then upgrade to wm6 rom by ... jiggs, homer285 & udayrulz .....
hi konanda
will this resolve the problem?
yeah, I have done alot of time to solve this problem on other xda atom also .... if you want, I'l upload this wm5 rom on mediafire ....
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Just keep flashing the device.. take a bit longer time and then will complete the updating ....
abuawab said:
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Click to expand...
Click to collapse
Allow the projected 30 mins for the update, if you plan to update via SD Card be sure to read, ALOT! good luck, oh you could have a little read in the Atom Wiki too.
could be your cable or connection?
ATOM ROM update problem
I had the same problem & tried different ways explained in this thread.
No success.
I tried with old original ROM and all new ROMs as well, it stucked on updating RADIO BURN message on computer and ATOM displays Updating RADIO STACK.
I tried removing battery and kept for some times and tried back but same result. Please anyone can help me
i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.
Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?
Thanks in advance.
max20041988 said:
i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.
Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?
Thanks in advance.
Click to expand...
Click to collapse
try to update to any WM6 or if you still want the WM5, there are a lot of ROM
's available. I had this tradgic experience aswell with o2 default ROM. Im contented with the WM6 although no a2dp support yet =)
abuawab said:
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Click to expand...
Click to collapse
i'll agree with the others, better change USB cable as well =) It could be faulty you can use cable from canon digicam/motorola phones et. al.
I would suggest reflashing the ROM with cooked ROM's available here like WM6 or WM5 if you still want to stick with it. o2 default ROM gives me a headache before. No1 rule before upgrading ROM...... Read the WIKI hehehehe
Hey guys I had the same problem, I went through the procedure as here http://forum.xda-developers.com/showthread.php?t=358442
Hope u can also flash 'OS+EBoot' part of it and then after ur Atom Exec restarts u can go in bootloader and flash the original WM5 from O2 ‘Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe’.
I need help my phone won't load up after HTC screen!
what can i do ? : (
Did you flash anything prior to this problem or even install a program or tweak the registry?
i flashed a rom..
i tried hard rest.
nothing works.
but i think i did a mistake ,Full TMOUS Compatible with 576 RAM + 1 GB Storage and i have normal HD Leo..
can that be the reason?
The problem is if you have a TMOUS and flash a non TMOUS compatible ROM or even worse a .51 Radio. There is no problem the other way.
Did you HSLP flash your phone first?
The ROM you are flashing, unless it is a stock one (ie from HTC) does not include a Radio ROM. These custom ROMs will specify what Radio ROMs work with their ROMs. These Radio ROMs have to be flashed first, although if you go into bootloader mode (Hold Volume-down button and switch on), then connect and flash the correct Radio ROM.
yes i have HSLP 2.08 .
and i also installed radio rom 2.12.50 before flashing to the rom.
the rom is VBNROM▐ Aug 16 - RC5.5 Android Compat▐ BLACK/GTX▐ 21915/24623▐ Test 23129/23569▐
and i have a European leo version not the american.
so can that be a problem?
so u say i can do the hold down and power then i can install a new rom?
fred_up
thanks i did the Down Vol And power and flashed to a new rom.
and works ^^ thank u so much
From the VBNROM ROM Thread
v-b-n said:
....
Btw...I do not recommend 2.12.xx radio with my ROMs due to RIL compatibility...they may work fine but are not a perfect match
....
Click to expand...
Click to collapse
oh i see that's y it didn't work probably.
Please Can someone help me, I had a friend help me flash my HD2 because I had a dutch version ROM and I really didn't know how to do it myself and it seem working fine not until I got a call but couldn't answer it and the phone got stuck. Each time I reset it wouldn't help, it will gets stuck at htc and won't load up. I did a hard reset and it loaded up but when I tried calling it got stuck again. This morning I tried to flash a new ROM from CleanEX DsE Core ROM Series (6.5.X ManiMore) every thing seems going on well during synchronization from computer. it showed the last ROM being (Miri_HD2_WM65_21914_Sense25_V18.0). But now the phone wont get to a complete start up. I cant hard reset it any more since it keep continuing from the same htc screen spot before battery removal, not giving me the chance to hard reset from power down mode. when I soft reset it once, it got to the point when it ask for my pin code but it went back to the htc screen mode again before completion. now I cant do any thing just staring at the htc screen.
He first flashed the ROM with HSPL. I saw something like SPL 1.42 SPL 1.42.HSPL on the reset screen. Is this suppose to be the correct HSPL number? and how can I go about this, I need all the help please.
hello evrey body
i installed miri "Miri & Steve0007 Elegancia V4.0 | Sep 13" rom on my mobile and evrey thing worked well then i made soft reset but Unfortunately while it was reseting it stopped on the white screen where it written htc in green font, then i thought maybe it take long to reset so i waited for about 30 min but nth happened. Then i made hard reset and nth worked.
After that i decide its better to make format but i faced the same problem while i was formating cuz its also stopped on the color screen where the color is red blue green white, I tried several times but it keeped stoping, I also tried to install new rom but its imposible, cuz the mobile doesn't boot to windows so the windows mobile center cant find it.
Can anyone help me please??????
Sir, you are looking fore help, but you don't give much information.
Oky you inform us witch rom you are traying to install, and that you have some problems with it. (it's obvious following your thread title)
but if you would some help there needed some more information.
HSPL version?
Radio version?
Device? Europa/usa model?
Did you tray to reinstall stock rom?
Did you read/follow the instructions on the threads where you got your cooked rom?
rafatgt said:
Unfortunately while it was reseting it stopped on the white screen where it written htc in green font, then i thought maybe it take long to reset so i waited for about 30 min but nth happened. Then i made hard reset and nth worked.
Click to expand...
Click to collapse
you did flash a matching radio, right?
You MUST use radio:
2.07.50.27 or 2.08.50.08_2 or 2.10.50.19_2 or 2.10. 50.08_2 or 2.09.50.29_2 or 2.10.50.26 -(Latest 2.13 T-MOU Radio)
Or 2.11.50.20 or 2.12.50.02
Click to expand...
Click to collapse
thats from elegancia post 1
rafatgt said:
I also tried to install new rom but its imposible, cuz the mobile doesn't boot to windows so the windows mobile center cant find it.
Can anyone help me please??????
Click to expand...
Click to collapse
dont need to have running phone to flash. Go into bootloader, connect usb, wait for 'serial' to become 'usb' and flash your rom or radio, , , for you you should now flash a radio and i bet the phone boots.