Hi guys,is possible reanimate the camera died after a bad flash (3 bad flash for precision),all whit WWE/eng image.
is possible If the bad flash is the cause??
Btw the phone work 100% in all other function (phone,screen,bt etc)
thanks for all...
No one help me??
thanks.
flash again
franko0 said:
Hi guys,is possible reanimate the camera died after a bad flash (3 bad flash for precision),all whit WWE/eng image.
is possible If the bad flash is the cause??
Btw the phone work 100% in all other function (phone,screen,bt etc)
thanks for all...
Click to expand...
Click to collapse
Try to flash it again with good rom, llok in threads here, is explained several times which rom to use. http://forum.xda-developers.com/showthread.php?t=353547
franko0 said:
Hi guys,is possible reanimate the camera died after a bad flash (3 bad flash for precision),all whit WWE/eng image.
is possible If the bad flash is the cause??
Btw the phone work 100% in all other function (phone,screen,bt etc)
thanks for all...
Click to expand...
Click to collapse
If you want any help, please simplt state more detail to your problem......
like... which rom you had done with...
what is the model of your phone,
all whit???
please..
dioxda2 said:
If you want any help, please simplt state more detail to your problem......
like... which rom you had done with...
what is the model of your phone,
all whit???
please..
Click to expand...
Click to collapse
Hi dioxda2,thansk for reply.
I don't know the version flashed on dopod because i buy it used.
My phone is dopod 818pro aka s200 or prohet.
currently in the phone is installed this rom (unknow)
rom version 2.20.7.34 wwe
rom date 7/10/06
radio 02.69.21
protocol 4.1.13.30
extrom 2.20.7.114
model name pm300
maybe i know the current installer rom mailing the seller,if i know it i reply to you.
Hope this help you,and me
regards
can some one help me please?
franko0 said:
can some one help me please?
Click to expand...
Click to collapse
tell us about what exactly your problem is, how dead is your camera?
Hi,when i push the camera button the pointer run but no camera appears.
is a hawdware or software problem?
franko0 said:
Hi,when i push the camera button the pointer run but no camera appears.
is a hawdware or software problem?
Click to expand...
Click to collapse
First, you've got to make sure the button mapping......
Please go start menu >>> settings >> personal >> button....
and look for the pointed function...
sometimes you need to deselected and then select again
if you are an advanced user, go to the windows folder and try to start camera directly from there....
and sort out what is going on.....
Hi,thanx for reply.
Button remapped but not work.
Go to programs and tap the camera icon and not work,pointer run but nothing appears.
Btw i try to flash hardspl whit prophet tool 2.8,the flash appears ok but when the device reboot 3 color screan appears..
try to flash some images but same thing...3 color screen...
finally i reanimate the pda whit NVID_RUU and the pda is ok but is the same image found when i buy the pda...i think the last owner try the same procedure to flash but whitout success....and the camera still not work...
any suggestion??
regards
franko0 said:
Hi,thanx for reply.
Button remapped but not work.
Go to programs and tap the camera icon and not work,pointer run but nothing appears.
Btw i try to flash hardspl whit prophet tool 2.8,the flash appears ok but when the device reboot 3 color screan appears..
try to flash some images but same thing...3 color screen...
finally i reanimate the pda whit NVID_RUU and the pda is ok but is the same image found when i buy the pda...i think the last owner try the same procedure to flash but whitout success....and the camera still not work...
any suggestion??
regards
Click to expand...
Click to collapse
1. Force bootloader mode MANUALLY ( SEE THE STICKY POST #1 [FROM MY THREAD] http://forum.xda-developers.com/showthread.php?t=353547,
2. FOLLOW THE PROCEDURES THERE,
3. AND BE SURE THAT YOUR HARDSPL IS REALLY DONE... JUST READ POST 1 THERE IS OK ..
'
Hi dioxda2,my dopod seems to not upgradable.
trying to flash spl whit some tools but remain 2.20.0001....hard and soft spl...soft spl seem to work better but when i flash a new rom all is ok on the screen but when pda reboot froozen on the first page (qtek,clouds and number version) all is the same whit all rom i tried but only the OS version change (10.0.0.0 or 7.0.0.7)...
any ideas??
1. download any rom from me,
2. active sync your prophet,
3. unzip my zip file with the password dioxda2 if asked,
4. double tap " upgrade "
5. follow the on screen dos instructions,
6. when you see the % process bar, just wait then,
7. let it stay connected with the PC until you see the "after hardreset screen",
8. DONE!!!!!
GOOD LUCK!!!!!
Hi dioxda2,downloaded all you roms and try 3 of 5.
All 3 rom say flash is ok but when pda reboot still in first page like all other rom i tryed...
is a bad block on my dopod or what??
put it on trashcan???
why only NVID_RUU flash ok????
thanx for you patience
regards
No way, i decide to destroy my dopod,is not possible upgrade any kind of rom,only ruu and orange rom are accepted by this piece of s**t.....
thanks anyway to dioxda2,your patience is very appreciate.
c ya.
franko0 said:
No way, i decide to destroy my dopod,is not possible upgrade any kind of rom,only ruu and orange rom are accepted by this piece of s**t.....
thanks anyway to dioxda2,your patience is very appreciate.
c ya.
Click to expand...
Click to collapse
sorry.....
noprob dioxda2,thanks for all..
i want to know this....why only ruu_rom and orange rom is able to flash on my dopod??
why radiorom and splashscreen flash ok and spl and roms not??
c ya!
The same is here!
Hi to all PDA masters there
I'm having exactly the same problem as above...My Dopod 818 G3 can't be upgraded with any Roms...It only works with NVID-RUU....With any other Roms,it stuck in the second splash screen....And with Nvid-RUU, the camera never works!!!With thanks to dioxda2 and Rondol1 who already tried to help me, I wanted to see if any one has got the same experience or not?..I aslo wanted to know it it's caused by a hardware problem,or it's a sort of software affect
So your camera got any problem before you upgrade to the new rom?? If your camera got that problem before upgrade, then your camera's problem, but no problem before flashing, then your ROM's problem. Try to search another stable rom for your dopod!
Good Luck!
Related
got stuck on o2 splash screen. don't know what happend and what to do.
got any tips?????
thanks
Do a hard reset -> press the power button and the reset button at the same time
i've done it already and still hangs...
Reflash the rom with one from your original operator. If you're using an o2 xda please download a rom from www.my-xda.com and follow the on screen instructions.
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset button SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
sorry, forgot to mention, yes its himalaya.
ok, i will try all your advices
thanks a lot
rago,
thanks for the tips, it worked.
ur always welcome bro
good to know that u have ur device back
RAGo, I did the same, and it said MODEL ID ERROR. How to fix that? Mine is now WM2005.
hi prd00...
replace the HimaUpgradeUt.exe in ur upgrade folder with the attached file,u will bypass country ID error...
good luck
RAGO :lol:
Hi all,
I think I need help from you guys. I have my xdaII dead with screen showing bootloader(it turns to USB when i plug into usb port). after I followed the instructions above...it shows model ID error. Please help....
problem solved
sorry guys...i forgot to use the given attachment file...thanks a lot.
Special thanks to RAGOv. your tips is worked.
splash
good day.
i have similar problem. it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install teh ARABIZER.
thank you.
splash
good day.
i have similar problem. i am using i-mate ph10b (himalaya). it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install the ARABIZER.
thank you.
dead XDAIIS (in bootloader mode) please help..
Dear Guys,
My XDAIIs is in bootloader mode (it shows serial--> at top and V 2.07--> at bottom, and doesnt turn to usb when i plug into my usb port). Does anyone know how to fix it? Please help....
hi ordinary...
haven't u said it worked!!!so what happened next???!!
plz explain more,for the mean while try changing the USB port ur using,check ur cable,and try to change the computer(desktop/laptop)...
if it doesn't work plz explain more what happened,so we can help u find the solution...
@arcquisumbing:u are not clear in ur post my friend...what same problem(are u in bootloader mode???!!),how did it happened after installing item from the extended rom????and u want a solution for what???!!!
sorry i couldn't help u my friend but plz try to explain more so we can undestand ur problem...
RAGO :lol:
stuck in splashscreen
i'm sorry.
i was referring to the stuck in splash screen.
after the hard reset, autorun was initiating installations for the contents of the extrom. i installed each and every item and at the end of it, it required resetting. i just clicked on yes to reset, then when it did, it just stops at the splash screen. i tried waiting for an hour or so, maybe it would just come, but still to no avail. i tried re-installing everything, but still the same thing. but when i tried NOT TO INCLUDE the ARABIZER, everything worked just fine.
now, i'll just pray for two things, 1-that you can help me solve this problem, and 2-that the light at the end of the tunnel is not a train.
thanks. more power to you.
hi arcquisumbing
now if u still have a 2003 OS on ur device,wich i doubt it,(i've read ur post in the thread How can I increase Storage memory in WM 2005),then ur problem can be solved inchallah :wink:
*if ur device is i-mate,do the following:
1-remove arabizer from Ext ROM,so ur device can enter OS
2-install arabizer cabs after being in the OS
download arabizer cabs from here http://forum.xda-developers.com/download.php?id=6292
*if ur device is not an i-mate,then u have to wait untill my no brand arabizer succeeds.... :wink:
RAGO :lol:
Re: splash
arcquisumbing said:
good day.
i have similar problem. i am using i-mate ph10b (himalaya). it occured after installing items from an extended rom (specifically ARABIZER). i tried installing other items in the same extrom, and it just worked fine.
what can be the solution? i was hoping i can install the ARABIZER.
thank you.
Click to expand...
Click to collapse
Hey bro since you have an Imate! Download this file from clubimate http://www.clubimate.com/support/PPC/ROM/RUU172810WWE_CDL_SKU2.exe and flash it.
I'm sure your problem will be solved for sure
Ps : RUU172810WWE_CDL_SKU2.exe is just the Arabic Extended Rom
dead XDAII and XDAIIs
Hi RAGOv,
THank you for your willingness to help my problem
1. The one I said worked is for my xdaII, but only to pass the MODEL ID error (it runs well, after i use your attachment file. I upgrade it to O2 ROM upgrade 1.66 WWE). However, After finish upgrading, It still stuck on O2 splash screen.
2. Now, Im facing the other thing. "the dead XDAIIs". Its screen only appear O2 splash screen when i put on the battery(even i already did a hard reset). Then I tried to change mode into bootloader mode (by pressing power button, record, and reset).in the end, after I did an upgrading. it also stucks on O2 splash screen.
Please help...I dunno what to do anymore..
dear all friends
i have wiza200 k-jam it was work with love rom then i try to flash e it with shelltoll with RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship
and then phone hange in phone screen ibl and sple it can go to boot mode
but how can reflash it. it cant accepte update so please help me how can i revive it please tell me .
iam waiting help .
put the device in bootloader mode and flash the latest rom from your carrier quick!!!! before the battery drains out.
holding down the camera button then press the soft reset whole..
that should bring you to bootloader.. then flash!
Faria
Greetings,
Faria if in this case the battery drains totally the phone wont revive?
Thanks.
samy.3660 said:
Greetings,
Faria if in this case the battery drains totally the phone wont revive?
Thanks.
Click to expand...
Click to collapse
Yes if the battery drains and the phone has no OS it is not capable of recharging the battery as this is controlled by software not hardware, an external charger would be needed to charge the battery and then flash the phone.
i charge battry with power suplly nd phone goes into flash mode but whats tool can i flash it with the update not work i have usb cable without charger .iam waiting steps to riveve it please give me link for any tool and flash files and steps .
and very thanks for all replay
waleed2 said:
i charge battry with power suplly nd phone goes into flash mode but whats tool can i flash it with the update not work i have usb cable without charger .iam waiting steps to riveve it please give me link for any tool and flash files and steps .
and very thanks for all replay
Click to expand...
Click to collapse
the tool you need to current revive your device is the latest official rom from your provider.....t-mobile- orange ?
link for wizard love rom
here is a link for the wizard love rom you will be able to flash your device using it get most people out of trouble the once charged can use the shell tool again
http://rapidshare.com/users/EXGZ7T you will find it a the bottom of the page
i have the love rom but i cant flash it i see this errore
so what can i do iam waiting it was love rom isdie it it before hange with shelltool
thanks to all the wizard now back to live but i have same problem it has simlock ans isee in the screen you have tried 9times please retry
so how can i slove this probem
My Wizard
I tryed to change the rom of my wizard do WM6. Now i can see the Bootscreen with T-Mobile but then nothing more comes. So i tryed to role back an older Rom vor my MDA. But i get the same error-message like the guy before.
So what can i do?
worker2000 said:
I tryed to change the rom of my wizard do WM6. Now i can see the Bootscreen with T-Mobile but then nothing more comes. So i tryed to role back an older Rom vor my MDA. But i get the same error-message like the guy before.
So what can i do?
Click to expand...
Click to collapse
I got it. Its working again. But I want Windows Mobile 6. So if someone can give me a clou how to change the rom and where I can find a ROM for G4 that would be great.
THX
i have a prophet that i have flashed wm6 rom without any problem, it happens today flashing a mistirious rom, and i don't know why he crashed at de middle... now, i hard or soft reset him, and he do move from the first screen with the version OS etc...
my question is,
is that other way to put the rom inside, or what can i do?? the active sync don't find him too...
is he dead?
thanks,
Alex
my msn contact is
[email protected]
psyx said:
i have a prophet that i have flashed wm6 rom without any problem, it happens today flashing a mistirious rom, and i don't know why he crashed at de middle... now, i hard or soft reset him, and he do move from the first screen with the version OS etc...
my question is,
is that other way to put the rom inside, or what can i do?? the active sync don't find him too...
is he dead?
thanks,
Alex
my msn contact is
[email protected]
Click to expand...
Click to collapse
1. never risk your prophet with NON-PROPHET roms,
2. usually, it can be reovered if you follow the steps from l3v5y,
3. try to flash the PVtemp or NVID in the " FORCE BOOT LOADER MODE "
4. A REFERENCE POST :http://forum.xda-developers.com/showthread.php?t=353547
thank you.
i've read a litlle more about and he's back
alex
hi pple : (
my phone just die ... i was trying to flash my rom from RTT shock star 7pOS to RUU_Huashan_Dopod_CHS_0.90.706.0_0.97.332.6_Debug.exe ...
this is not my first time flashing ... i have did wat i usually does ... i run task29 ... press vol down to get to usb ... then i flash it with the huashan rom ...
it install for a while and then it shows the white screen with green htc logo ... for 30min i dare not cancel it ... then seeing something not right i unplug the phone from my pc ... now i cant get into my phone ... and after hardreset press vol key up ... it just stuck at the same white screen with green htc logo ...
anyway i can get into the usb mode again so that i can flash back my rtt shock star????
pls HELP!!!
try flash HLSP
and new ratio
and the rom again
how do i do that when i have not usb connection? MicroSD? how does it work?
it's for u're radio install the recomended radio in rom tread.
Have you tried to remove battery.
Replace battery, Tap power on button and hold Volume down only Button?
(sorry if you have but has worked for me in past after I stupidly not paying attention and unplugging during a flash)
THANX htckev!!!!!
u r my saviour!!! i didnt noe we can do that to get into the HSPL thanx thanx : )
Thanx and992 and hessamx too for fast reply : )
did you really flash the huashan-rom on you hd2-device????
did you use your hd2 "goldcard" to do this??????? (didn't even know flashing different device rom works...)
you should know that you can't flash a rom from a completely different device
and expect it to work....
goldcards are used to flash different CID roms not different device-roms....
crazy37 said:
THANX htckev!!!!!
u r my saviour!!! i didnt noe we can do that to get into the HSPL thanx thanx : )
Thanx and992 and hessamx too for fast reply : )
Click to expand...
Click to collapse
You're welcome sounds like it worked so good news
HD2Owner said:
did you really flash the huashan-rom on you hd2-device????
did you use your hd2 "goldcard" to do this??????? (didn't even know flashing different device rom works...)
you should know that you can't flash a rom from a completely different device
and expect it to work....
goldcards are used to flash different CID roms not different device-roms....
Click to expand...
Click to collapse
nope i didnt not noe abt "goldcard" ... oh man i tot all the roms in the forum can be flash using same method ...
thank god i read this thread!
i was almost flashing a rom from this phone into my hd2 to try to improve battery life!
i saw it was t-mobile compatable, so i thought it would work...
Let this be a warning guys. Don't just flash any rom from other devices to our HD2s. They might die if you do that.
Before flashing any rom try reading the first few posts in the thread or if you're not sure of what you are about to flash, just search first and make things clear before you do anything.
Regards,
Pongskie
lufeig said:
thank god i read this thread!
to try to improve battery life!
i saw it was t-mobile compatable, so i thought it would work...
Click to expand...
Click to collapse
Try Radio ROM 2.12 increased my battery life and reception too
lmfao.... LUFEIG!!!! it was the best joke i've heard in my whole sad life, WELL DONE
i have same problem (phone stuck on boot screen) but trying the above, gets me to the four coloured bootloader but freezes with the word 'serial' at the bottom of the screen? no flashing colours - have you (or anyone) come across this before ?
@mann kumar
bootloader vers?
Ratio vers?
what rom you try to flash og what program do you use
mann kumar said:
i have same problem (phone stuck on boot screen) but trying the above, gets me to the four coloured bootloader but freezes with the word 'serial' at the bottom of the screen? no flashing colours - have you (or anyone) come across this before ?
Click to expand...
Click to collapse
Just to be sure:
Have you connected your phone to an USB socket on your computer?
It will never show USB if you haven't
Please give info on "4 colored screen" and phone type (T8585, T9193, TMOUS)
Hi,
I was running android from my sd card but now wanted to go the NAND way. I installed HardSPL3 to 2.08 and then flashed MAGDLR to the phone. Everything was fine up to here.
Now the problem bit ....... The call button on my HD2 is depressed(I must have sat on it at some point), however it still worked. When I get to the option screen in MAGDLR and go down to 'flash from usb', the call button does not work, so I can navigate up and down but can't select anything!
I'm stuck in MAGDLR ......... Please help!
......one last thing, if I were to have the fault repaired what am I looking at cost wise.
Any help greatly appreciated
Shab
s_hab said:
The call button on my HD2 is depressed
Click to expand...
Click to collapse
Tell it to stop been a wuss and cheer up
Boom Boom ..... i was looking for help, not your one liners. LOL!
Try removing MAGDLR by flashing your official rom from SDcard. This should remove MAGDLR and get you back to WM.
s_hab said:
Hi,
I was running android from my sd card but now wanted to go the NAND way. I installed HardSPL3 to 2.08 and then flashed MAGDLR to the phone. Everything was fine up to here.
Now the problem bit ....... The call button on my HD2 is depressed(I must have sat on it at some point), however it still worked. When I get to the option screen in MAGDLR and go down to 'flash from usb', the call button does not work, so I can navigate up and down but can't select anything!
I'm stuck in MAGDLR ......... Please help!
......one last thing, if I were to have the fault repaired what am I looking at cost wise.
Any help greatly appreciated
Shab
Click to expand...
Click to collapse
Thanks 10507, it all seems clear now ........ why didn't I think of that. It's loading the ROM as I type.
.....Once again thanks dude!
s_hab said:
Thanks 10507, it all seems clear now ........ why didn't I think of that. It's loading the ROM as I type.
.....Once again thanks dude!
Click to expand...
Click to collapse
Glad, I can help
I did flash a stock ROM from my SD card and everything goes fine untill I reboot the phone. Then the MAGDLR screen shows up again. How can I get rid of MAGDLR now because I need to send my phone back to HTC so they can repair the touchscreen which isn't working.
My HD2 call button and windows button unresponsiveness
Hi all guys, i really need a help..since i've upgrading my rom to 3.15, then my hd2 call button and windows button cant be use..i wanna change my windows mobile to NAND..but, im stuck in MAGDLR..so my friends help me to retrive me WM back..any of u know how to overcome my button back?..it is cause by the rom or hardware damage?..im still beginner in this, kindly hoping for all ur opinion guys..
hd2beginner said:
Hi all guys, i really need a help..since i've upgrading my rom to 3.15, then my hd2 call button and windows button cant be use..i wanna change my windows mobile to NAND..but, im stuck in MAGDLR..so my friends help me to retrive me WM back..any of u know how to overcome my button back?..it is cause by the rom or hardware damage?..im still beginner in this, kindly hoping for all ur opinion guys..
Click to expand...
Click to collapse
If you download and flash the official ROM for your HD2 you can flash it via bootloader. While your phone is off press and hold down the volume down button. Connect your phone via USB cable and wait until you see USB in the white bar of tbe bootloader screen and your computer to show it recognizes ths phone. Right click the ROM package and click run az adminostrator. The ROM should flash and remove MAGLDR, bit it has to be an official ROM as a custom will not remove MAGLDR. After flashing is done put phone back into bootloder to check SPL version. You want the SPL of the ROM you flashed. If it is not righr download HSPL 4 and use it to set the correct SPL, hint you want the SPL x.xx.0000 not SPL x.xx HSPL.
If you want to just to make sure flash the official ROM via SD card and it should remove MAGLDR, CWM, and HSPL if house have them. Go here to learn how to do this.
what happens if your down volume button doesnt work. is there any way to flash back to your old rom using magdlr? my call button still works but every time i put it on usb flash and try to install the original rom it doesnt seem to work
Pls Sir Help Its Urzent ???
My Htc HD2 . I try To Change WM to Android . But When I try to select USB FLASHER MODE On MAGLDR . My Call button Not Working (I Never Try To Using Call Button Before) .... Now What Can I DO ?????
Pls Anyone Help Me ?????