Hi,
I was running android from my sd card but now wanted to go the NAND way. I installed HardSPL3 to 2.08 and then flashed MAGDLR to the phone. Everything was fine up to here.
Now the problem bit ....... The call button on my HD2 is depressed(I must have sat on it at some point), however it still worked. When I get to the option screen in MAGDLR and go down to 'flash from usb', the call button does not work, so I can navigate up and down but can't select anything!
I'm stuck in MAGDLR ......... Please help!
......one last thing, if I were to have the fault repaired what am I looking at cost wise.
Any help greatly appreciated
Shab
s_hab said:
The call button on my HD2 is depressed
Click to expand...
Click to collapse
Tell it to stop been a wuss and cheer up
Boom Boom ..... i was looking for help, not your one liners. LOL!
Try removing MAGDLR by flashing your official rom from SDcard. This should remove MAGDLR and get you back to WM.
s_hab said:
Hi,
I was running android from my sd card but now wanted to go the NAND way. I installed HardSPL3 to 2.08 and then flashed MAGDLR to the phone. Everything was fine up to here.
Now the problem bit ....... The call button on my HD2 is depressed(I must have sat on it at some point), however it still worked. When I get to the option screen in MAGDLR and go down to 'flash from usb', the call button does not work, so I can navigate up and down but can't select anything!
I'm stuck in MAGDLR ......... Please help!
......one last thing, if I were to have the fault repaired what am I looking at cost wise.
Any help greatly appreciated
Shab
Click to expand...
Click to collapse
Thanks 10507, it all seems clear now ........ why didn't I think of that. It's loading the ROM as I type.
.....Once again thanks dude!
s_hab said:
Thanks 10507, it all seems clear now ........ why didn't I think of that. It's loading the ROM as I type.
.....Once again thanks dude!
Click to expand...
Click to collapse
Glad, I can help
I did flash a stock ROM from my SD card and everything goes fine untill I reboot the phone. Then the MAGDLR screen shows up again. How can I get rid of MAGDLR now because I need to send my phone back to HTC so they can repair the touchscreen which isn't working.
My HD2 call button and windows button unresponsiveness
Hi all guys, i really need a help..since i've upgrading my rom to 3.15, then my hd2 call button and windows button cant be use..i wanna change my windows mobile to NAND..but, im stuck in MAGDLR..so my friends help me to retrive me WM back..any of u know how to overcome my button back?..it is cause by the rom or hardware damage?..im still beginner in this, kindly hoping for all ur opinion guys..
hd2beginner said:
Hi all guys, i really need a help..since i've upgrading my rom to 3.15, then my hd2 call button and windows button cant be use..i wanna change my windows mobile to NAND..but, im stuck in MAGDLR..so my friends help me to retrive me WM back..any of u know how to overcome my button back?..it is cause by the rom or hardware damage?..im still beginner in this, kindly hoping for all ur opinion guys..
Click to expand...
Click to collapse
If you download and flash the official ROM for your HD2 you can flash it via bootloader. While your phone is off press and hold down the volume down button. Connect your phone via USB cable and wait until you see USB in the white bar of tbe bootloader screen and your computer to show it recognizes ths phone. Right click the ROM package and click run az adminostrator. The ROM should flash and remove MAGLDR, bit it has to be an official ROM as a custom will not remove MAGLDR. After flashing is done put phone back into bootloder to check SPL version. You want the SPL of the ROM you flashed. If it is not righr download HSPL 4 and use it to set the correct SPL, hint you want the SPL x.xx.0000 not SPL x.xx HSPL.
If you want to just to make sure flash the official ROM via SD card and it should remove MAGLDR, CWM, and HSPL if house have them. Go here to learn how to do this.
what happens if your down volume button doesnt work. is there any way to flash back to your old rom using magdlr? my call button still works but every time i put it on usb flash and try to install the original rom it doesnt seem to work
Pls Sir Help Its Urzent ???
My Htc HD2 . I try To Change WM to Android . But When I try to select USB FLASHER MODE On MAGLDR . My Call button Not Working (I Never Try To Using Call Button Before) .... Now What Can I DO ?????
Pls Anyone Help Me ?????
Related
Hi guys,
I installed a cooked version (Juggalo TP) on my TP ,after finishing the installation and automatic reboot , my device hanged on HTC BIOS.... !!!!!
PLEAAAAAAAAAAASEEE HELP ME...
i dont know what to do !!!!!!!!
i cant to ANYTHING....
Ive hard reset several times,took the battery out but nothing happens... stilll the same problem.
PLEASE help me ,is there any way to roll back to a previous version or default
or something... :'(((
I really appreciate your help... !!!!
can you get to the tri-colour bootloader of hard spl?
if so you will be able to reflash the rom via sd card?
saied7 said:
Hi guys,
I installed a cooked version (Juggalo TP) on my TP ,after finishing the installation and automatic reboot , my device hanged on HTC BIOS.... !!!!!
PLEAAAAAAAAAAASEEE HELP ME...
i dont know what to do !!!!!!!!
i cant to ANYTHING....
Ive hard reset several times,took the battery out but nothing happens... stilll the same problem.
PLEASE help me ,is there any way to roll back to a previous version or default
or something... :'(((
I really appreciate your help... !!!!
Click to expand...
Click to collapse
hello, try to put it into bootloader and then try to flash a different rom, might b a dump question, but you have installed hard spl?
lupe
yes i have installed the HARDSPL ,but i dont know how to go bootloader,
when i press enter,vol down and reset it comes to a 3-4 color screen but immediately jumps to a white screen and asks me to reset all data (vol up) or cancel (vol down)
btw, i've put a rom on my sd card but nothing happend !
oh man.. pff
maybe you have to rename this rom to RAPHIMG.nbh
Volume down and reset (without the enter) will get you into Bootloader screen. From there is should pick up the ROM on the SD card and ask you if you want to flash.
thnx for the tips bro's.
i did as you said (vol down and reset without enter)
and it asked me to load the image by pushing the enter button and i did.
now its about 15-20min that im waiting and still is on the 3color screen and nothing moves or comes or goes...
is it normal?
finally done. back to normal
oh im so happy , thnx for the help.
saied7 said:
finally done. back to normal
oh im so happy , thnx for the help.
Click to expand...
Click to collapse
glad to here its working again. could you please post exactly what you did as others might find themselves in this same spot, if they know what you did to fix it, it will save them time and also keep them from having to start a new thread.
thanks
Lupe
ya my problem was as i mentiond before i installed a CDMA version(USA VERSION locked on a carrier i think) , because the roms that were cooked are amazing,beautiful and dynamic ... but i didnt know that its not compatible with a normal TP and my phone after installation hanged just on the BIOS screen...nothing goes,nothing comes...i thought i've bricked my phone !
but after your advises i put one of the GSM roms on the SD card and changed the name of ruu_signed.nbh to RAPHIMG.nbh and VOL DOWN + SOFT RESEST to go to the bootloader menu,followed the instructions and finally fixed the problem and installed the right version.
but one thing that i DONT understand is why these beautiful roms are ONLY for CDMA version and not compatible with normal TP's???
thnx for the sharing of your experience with others
Can someone help or advise?
ive just flushed the new EnergyROM_21877_RAPHAEL_04.Dec.2009_StandardM2.5 ROM and my TP remain frozen on first screen. doesnt continue the boot process nor go back. cant sync . cant do anything!!
HELP!!!!!!!!!!
bigram said:
Can someone help or advise?
ive just flushed the new EnergyROM_21877_RAPHAEL_04.Dec.2009_StandardM2.5 ROM and my TP remain frozen on first screen. doesnt continue the boot process nor go back. cant sync . cant do anything!!
HELP!!!!!!!!!!
Click to expand...
Click to collapse
Which version of the Touch Pro do you have (CDMA or GSM)?
Its a GSM version
It might be a bad flash. Redownload the rom. Take out the SD card, copy to it raphimg.nbh with a card reader and put it back in the phone. Hold volume down + reset, follow onscreen instructions. Or if you don't like this, take out sd card, vol down + reset, stick usb cable, when you see USB written on the 3 color screen run customruu. Report back if any problems arise
Re-flashing the ROM could help. But to get down to basics, have you run HSPL on the phone already?
have u loaded hardspl on there? if not please follow this
http://forum.xda-developers.com/showthread.php?t=448008
have u loaded hardspl on there? if not please follow this
http://forum.xda-developers.com/showthread.php?t=448008
crap... double post.. sorry.
I have the Olinex HSPL loaded. Ill try what post #4 suggest and let u know.
BTW when i did vol+reset i c on the 3 color SERIAL not USB. Is it a problem?
THX
thank u FREAKZONE very much
its seems ur second advise going to do the job.
flashing now and let u know
thx everyone
Ram
Thank u All
Special thx for FREAKZONE
It worked. ive my TP back
hello folks,
first off thanks to all the people who help make this forum better and better.
have used you're help a few times especially trying to flash a rom. but now there's a problem... I've installed artemis Rom a couple of times but I wanted the newest so I've downloaded it, flashed my hd2 with task29 like always. pressed vol. down button it restarted until white boot screen. ok, possible, so I reset it and press vol. down again. but still white boot screen. after trying it for 70(!) times. I used the forum. saw that maybe hooking it up to pc and starting custom rom .exe should work. but no. wont even start when hooked to a computer. so please help!
Info:
Cotulla hspl 1.42.00
Task29 by dooloop performed( got stuck after that)
Rom Artemis. 31.5 (current) 35.1 (wanted to install.
Thanks In Advance
Maajelvv
Two possibility's;
Tray to do a hard reset,
Ore tray to install Stock Rom!
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
I'm out off Idea; tray to send Sir Sternas a PM with your question, maybe he get some Ideas; ore tray to ask this question on the Artemis Thread, there are also helpful peoples out there!
Edit; I just add your question on the Artemis thread!
http://forum.xda-developers.com/showthread.php?p=8450678#post8450678
you haven't made hard reset. if you wont to do hard reset you have to press both volume buttons and then pres power buton ( or press red button near batery ).
also try to make a goldimage ( search the forum ).
regards
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
As Luka1111 said, you haven't done a hard reset. Check this out:
http://www.smartphonegurus.com/forums/topic/8829-hd2-how-to-soft-reset-hard-reset-and-place-in-bootloader-mode/
Dmm;
That I didn't see/read it correctly the way he did a hard reset??
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
What´s the size of your SD-Card? Flashing from SD works only with max. 8 GB - Card, 16 GB or more won´t work! (Own experience!)
Can you connect your device to ActiveSync? Or otherwise stated: What happens when you connect your device to your PC? Does ActiveSync or Windows Mobile Device Center even startup?
BTW, what happens when you start your device now? Does it hang or just load your old Artemis version??
regards, Kuzibri
uli71 said:
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Click to expand...
Click to collapse
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hey guys,
maybe you haven't read my whole posting: Have you tried to get access to tricolor bootloader without pluged in SIM and SD?
If you had trouble with your answer button before flashing, is it possible your volume button is also without function? Therefore it seems to be a hardware problem.
Sorry, if this is not the answer you would like to read, but the advise to test without pluged in SIM and SD is my last. Entering bootloader is a basic system feature, as far as I know.
Best regards,
Uli
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hi,
I have send you a PM. Please read this ASAP!!
regards, Kuzibri
Hey Uli,
I've tried both. with and without sim or SD cards. still no functioning....
I've thought about the fact that it might be broken but it worked right before flashing....
thanks for your efforts though..
Maajelvv
As I already mentioned, this poor guy has a major problem with his device, which seems to be hardware related (either volume down button does not work or the on/off key). After having extensive contact with him by phone, the only solution seems to be to bring it back to the store to let it repair. Unfortunately, he will have a great chance to loose his warranty, because HTC probably will be able to found that there is another ROM installed. Whish Maarten good luck with his problem!! Also very sorry I could not help you to solve your problem. I'm personally very disappointed by that!
regards, Kuzibri
I have a hd2 with blutopia n supersports rom and today has been 1 helluva messed up day seriously !( I cant think straight) its all because my phone wont work. the phone was working beautifully with android on it and out of nowhere today the screen is not responding AT ALL. its so frustrating cant make a call cant read my txts.can some 1 please just tell me what i have to do so i can get a replacement? I put hspl3 and bluetopia android and supersports rom....please tell me what rom do i need to flash to it,do i have to relock/remove hspl3? thanks if u can help me out i just cant think clearly right now
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
carl1961 said:
turn off phone, hold down on the up and down volume button by pressing in middle while u toutch the end key..the red key.. after it boots press volum up to redo phone... if that does not fix it.. reflash with original rom
Click to expand...
Click to collapse
what about hspl3???? what do i have to do so i can send it back without tmobile asking me why is there a custom rom and hspl3 on ur phone
ihateu said:
what about hspl3????
Click to expand...
Click to collapse
will be replaced when you flash original rom
djcedric said:
will be replaced when you flash original rom
Click to expand...
Click to collapse
ok how can i get the original rom... i cant get it from tmobile website because it wants a mei # and i cant get to it on my phone cause the screen is not working
open your phone up. take the battery off. The IMEI should be there along with serial number. Good luck
Touchscreen problem
Yesterday I start with a similar problem.
Using several Android builds on the same stock memory card.
The touchscreen stops responding always when I try to
reboot or turn off the phone, the same on all Android builds
and on WinMO. But locking the phone brings the touchscreen
back to life. Then I am able to unlock the phone and the
touchscreen keeps working OK.
Will try flashing the updated stock ROM.
you run hspl3 again , but select the other option with the extra.oooo, 208.000 , by default hspl3 installs the one to allow roms to work,,, when you rerun hspl3 select the other to set back to original so you can send back to factory anfter u install the t-mobile original rom
best to read this
http://forum.xda-developers.com/showthread.php?t=653614
Hey, i tried to install android on my HD2 several times and failed, but then i noticed i had wrong version of hspl so i couldn't start MAGLRD (i had 3.03 i think i should've had 2.08 right?) Anyway i then tried to remove the HSPL by formatting my sd card and putting the file from original rom (i don't remember the name) and renaming it to LEOIMG, it started installing the rom i went to another room, when i came back it had finished and was on the red/blue/green screen and it said update failed and i had to retry, but now none of the exes work like rom updates or task29 nothing. when i turn on the phone it says "Not allow" and then goes to the red/blue/green screen. Please help me, I'm freaking out is there any way to fix it? Is there even a way to access SD card when the phone does this?
TomaToz, use the computer to flash via USB cable.
I can't, none of the rom updates or ANYTHING works since this, they all give errors
go to the magLDR page and look for how to remove it.
then start from scratch
There's no info how to remove it but even if there was how would i? None of the exes work and i can't turn the phone on, also i dont think MAGLRD got installed cause i had HSPL 3.03 instead of 2.08
Come on isn't htere anyone who ca help me? :|
are you sure you haven't bricked your phone?
because it just seems you did :/
I don't think you read the bold "You need HardSPL 2.08 before installation!" just above the history?
anyway, can you not flash a radio via USB as well?
also, if you post the error messages you get maybe we can help you more.
you can also check here:
http://forum.xda-developers.com/showthread.php?p=10275463
What does bricked mean? :9
and no i can not flash radio or anything else, i'll edit this message with a picture of what the error message looks like
EDIT: WOW, i tried to run the hspl installation and installed hspl 2.08 successfully, not i turned my phone on and its the screen where you choose to start the update for rom. This is the update after which my hd2 said "Update failed" so I'm scared to take any steps, please respond and tell me what to do
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Does anyone know where to get apps for Android 2.3.2?
What i installed is TyphooN_CM7_v3.5.9-MAGLDR
Help please!!! Hd2 stuck !
HI to all!my phone was working great until i decided to try a new rom so I installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again at least 3 times but still nothing... is there anything else i can try? (even on the hardware?)
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
THANK YOU in advance!!!
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
thank you Andrew!I found the problem...
AndrewSh said:
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
Click to expand...
Click to collapse
thank you so much for the quick response! the problem was with my volume down button...i opened up the phone and moved the flex ribbon a bit to get it into place .after that it got in bootloader mode succesfully!im now back with elegancia and never gonna change it...i think i got a little greedy...afterall elegancia rom is great!thank you Miri and Steve0007 for this great rom and thank you again Andrew!
TomaToz said:
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Click to expand...
Click to collapse
glad it worked out in the end