Related
Hi to all,
please help me,
When i wana install the last atom exec rom,two days ago,everythings is ok,but after hard reset,my device stayed at O2 logo and I couldn't hard reset my device and install rom too,because didn't sync with my laptop,have you any idea for this problem?
take off the battery and try again
I take off the battry many time,but this problem exist yet.
can you enter in bootloader mode (camera + reset) ?
yes,but i see a black screen that written on it:sd detected and
"starting download ...
sdDownload:couldn't find file;diskimg.nb0;.
sdDownload:couldn't find file;eboot.nb0,.
sdDownload:couldn't find file;dm.nb0,.
..."
at the end of screen:
"SD trensfer completed."
what your idea?what things i must to do?
Once entered in bootloader mode (ignore these SDCard messages), plug de USB cable and wait the device to be detected by windows
you'll be able to upgrade a new rom
i have the same problems, i upgrade the phone still stay on o2 logo
any other solution??
thanks
have you follow the upgrade procedure correctly?
just an opinion...
remove sd card...
then enter bootloader
then run upgrade DSUU.... follow on screen instruction
should be ok to upgrade your rom...
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
DUN USE MEMORY CARD TO FLASH AGAIN!!!
joncy said:
just an opinion...
remove sd card...
then enter bootloader
then run upgrade DSUU.... follow on screen instruction
should be ok to upgrade your rom...
Click to expand...
Click to collapse
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
mphoneclinic said:
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
Click to expand...
Click to collapse
what ROM version that you used?
think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.
note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
chartreux said:
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
Click to expand...
Click to collapse
What can we do if the bootloader don't start ?
it is possible to modify eboot without bootloader ?
Thanks a lot.
bedav said:
What can we do if the bootloader don't start ?
it is possible to modify eboot without bootloader ?
Thanks a lot.
Click to expand...
Click to collapse
I don't think so, if your device can not be turn on via bootloader mode, then the bootloader corrupted on your device. the key is to secure the bootloader partition. without that one will be useless
please help me expert.
now o2 like dead phone. no windows in there. i try to boot and just have the screen black and some information:
mn2 bootloader
jun 13 2006 ...........
...................
debug module through uart
jump to dm.......
i try to conect to pc and upgade files in forum but can not conect.
i think, it should be install for the original wm5.0 before upgrade.
how can i get wm5.0 original and try to fix please
thank alots
http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=eboot
check post 12
homer285 said:
http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=eboot
check post 12
Click to expand...
Click to collapse
chartreux
Member Join Date: Aug 2007
Posts: 92
--------------------------------------------------------------------------------
Quote:
Originally Posted by mphoneclinic
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
what ROM version that you used?
think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.
note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
Attached Files
thank you, i trying this way.
o2 atoem Exec unbale to boot in normal mode
my o2 atom exec unbale to boot in normal mode.
iT BOOT ONLY IF I PRESSED CAM+REST, THEN IT SHOWS MN2 BOOTLOADER,
1- FOR DEBUG MODE 2 FOR DM
IF I PRESSED 1 AND GOES DEBUG MODE , IT ASKED FOR RESTART.
IF I RESET THEN IT BOOT UP , BUT BATTERY GOES LOW IMMIDIATE,& SHUT DOWN DEVICE.
THEN I TRY THIS ANOTHER TIME BUT THIS TIME WHILE RESTART DEVICE I PLUG FOR CHARGEING CABLE. NOW DEVICE START OK ,BUT I REMOVED BATTERY AND TEST FOR SWITCH ON FOR ANOTHER TIME IT NOT STARTED. IT GOES BACK IN DEAD MODE. NOW I M USING IT THOUGH DEBUG MODE.
SO ANY ONE TELL ME WHAT TO DO FOR THIS OR UPGRADE OS .
THANKS
VISHAL
--------------------------------------------------------------------------------
Quote:
Originally Posted by mphoneclinic
There is no SD card in the phone. the upgrades is went well 100% flashed in.
But the phone still stuck on startup O2 LOgo.
any idea??
BR
what ROM version that you used?
think better for you to downgrade to ORIGINAL WM5 ROM. since ATOM EXEC used the MN2 bootloader you will not able to update you rom via bootloader mode. BUT I will share my experience on my ATOM EXEC when my device in unable to boot condition.
1. you need to downgrade your bootloader to MN1 type (ATOM Standard bootloader), copy the EBOOT.nb to your SD card
2. prees camera+reset --> you will see the bootloader found and update, and device turn off
3. TAKE OUT SD CARD !!
4. take out your battery, press CAMERA+RESET and plug in back your battery, you should come back to bootloader mode again (now you should have MN1 bootloader on your ATOM EXEC)
5. Run Xda-Atom-Exec-ENG-20060721-MOT0822.exe, the ROM will be intalled on bootloader mode BUT will be stack 6% on EXTENDED ROM
6. when 6% (progress bar not move anymore) just take out your USB cable from your ATOM --> on this stage you already upgrade ROM + bootloader(MN2) just the EXT ROM failed to update
7. turn on your device, you will able to enter to WM5 but the job not finish yet.
8. run one more time Xda-Atom-Exec-ENG-20060721-MOT0822.exe on DSUU mode, viola after completed the progress your device will be back on ORIGINAL WM5.
note: please read step by step, if you don't understand than better DON'T DO IT, send to service center will be good choice otherwise your ATOM EXEC can really become paper weight!
Attached Files
thank you, i trying this way.[/QUOTE]
O2atom Exec unable to switch on in Regular
my o2 atom exec unbale to boot in normal mode.
iT BOOT ONLY IF I PRESSED CAM+REST, THEN IT SHOWS MN2 BOOTLOADER,
1- FOR DEBUG MODE 2 FOR DM
IF I PRESSED 1 AND GOES DEBUG MODE , IT ASKED FOR RESTART.
IF I RESET THEN IT BOOT UP , BUT BATTERY GOES LOW IMMIDIATE,& SHUT DOWN DEVICE.
THEN I TRY THIS ANOTHER TIME BUT THIS TIME WHILE RESTART DEVICE I PLUG FOR CHARGEING CABLE. NOW DEVICE START OK ,BUT I REMOVED BATTERY AND TEST FOR SWITCH ON FOR ANOTHER TIME IT NOT STARTED. IT GOES BACK IN DEAD MODE. NOW I M USING IT THOUGH DEBUG MODE.
SO ANY ONE TELL ME WHAT TO DO FOR THIS OR UPGRADE OS .
THANKS
VISHAL
Hi all,
I am using Atom exec Bootloader on rw6815. Phone is working without any problem but when I use the camera+reset buttons for switch to bootloader mode ,it can't switch to bootloader mode . Is there any other way to restore the bootloader to the original hp bootloader.?
Hello!
Phone was formatted with flashtool - everything except bootloader.
How to fix it now ?
When USB is pluged, It's reeboting constantly (windows sound), for every few seconds. The screen is black, and the phone don't reacting when pressing keys (vol +/- or power).
I have firmware from official site but i Can't install it via SP Flashtool. STATUS_BROM_CMD_SEND_DA_FAIL
Any ideas how to fix it ?
Meybe md5.file (backup) from MTK Droid tool could help me ? (unfortunatley i can't find it anywhere)
Baunun said:
Hello!
Phone was formatted with flashtool - everything except bootloader.
How to fix it now ?
When USB is pluged, It's reeboting constantly (windows sound), for every few seconds. The screen is black, and the phone don't reacting when pressing keys (vol +/- or power).
I have firmware from official site but i Can't install it via SP Flashtool. STATUS_BROM_CMD_SEND_DA_FAIL
Any ideas how to fix it ?
Meybe md5.file (backup) from MTK Droid tool could help me ? (unfortunatley i can't find it anywhere)
Click to expand...
Click to collapse
Can you enter to recovery ? If yes then you should be able to connect to PC and copy update.zip to phone.
Take a look at 4pda forum for Meizu M5, here i found all files and managed to update to Flyme 6 very easly.
Good luck!:fingers-crossed:
How can you do this ? I want to use 'fastboot erase logo' ,but it says 'remote:format for partition 'logo' is not allowed' ,please help. my email:[email protected]
any idea
have same problem
sptool fort phone and now its dead
llcoolr said:
any idea
have same problem
sptool fort phone and now its dead
Click to expand...
Click to collapse
Check out this thread by me and drop a like.
It will definitely help you
https://forum.xda-developers.com/showthread.php?t=1936747&page=2
Guide to root Mi5
First of all you should unlock the bootloader first then only we can root our MI5
If You want to Unlock the bootloader MI5 follow this link :
http://en.miui.com/thread-267361-1-1.html
You can request the unlock code with any rom - Example global or Stable rom it doesnt matter (U should enable the developer options and enable the OEM unlocking and Usb debugging on
You have to create MIUI account and request the code - You have to wait for 3 days for receive the unlock code
after received the code. u can try with MI unlock code with this app . it will say binding time is too less u have to wait some time. It will say like that . (U dont want to wait try older version of Unlocking app ) it may allow u to unlock instantly ..
Follow this guide for unlocking app : http://en.miui.com/thread-536201-1-1.html
After unlocking the bootloader u have to flash twrp recovery
check this link for recovery : https://dl.twrp.me/gemini/ ( always use latest one)
download it and flash through fastboot mode.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
(Simple - You have TWRP recovery now)
ROOT GUIDE :
After installing TWRP recovery download super su zip file from chainfire
Download it from here : https://download.chainfire.eu/696/supersu/
flash it through TWRP ( Entering procedure for twrp by pressing power button + Volume up button)
Flashing through fastboot :
Step 1 : Connect ur phone to fastboot mode
Step 2 : Download it from this thread MI Flash tool http://xiaomiadvices.com/download-xiaomi-mi-flash-tool/
Step 3 : Download the fastboot rom this thread : http://xiaomiadvices.com/download-miui-8-global-stable-rom-fastboot-recovery-rom/
Step 4 : Flash it through fastboot mode - ( Note fastboot firmware is not in flashable extension - u have to change it the correct extension and it will work only place in C drive only (I mean which drive the os is installed ) - I attach the screenshot guide to change the extension later on - or else Google it
Step 5 : Flash it through the MI FLASH app and select flash all -
thats it
UNBRICK GUIDE: (also Relocking bootloader)
unfortunately ur device is bricked means u cant turn on ur device . any button will not work in ur phone so.. first u connect ur phone in data cable .. u might be see the QC bootloader driver will install in ur computer . After that u cant flash anything in MI flash tool . coz MI flashtool will not recognize ur device .
So .
Step 1 : Download MI5 CHINA PC suite to ur computer and install it ( English version will not work ) china version only updated
Step 2 : http://zhushou.xiaomi.com/ this link china pc suite is available
step 3 : Download firmware for our device http://en.miui.com/download-299.html download it from here (Global or Developer version thats not an issue)
Step 4 : Connect ur phone and open the pc suite . it has the option to select the update file in first menu ( I too dont know wat is written in that pc suite ) coz all is in chinese version ) check all the options u will find the option like select the update file that time u should press shift then only u can able to access the select option after that select the downloaded firmware ) simple u can see green option after selecting firmware. ( If u have doubt u can ask me in pm any time)
Step 5 : Flashing time it will take upto 30 minutes .
step 6 : After flashing it will automatically relock the bootloader .
Thats it . u have successfully unbricked the phone
(In some cases PC also not recognize the QC bootloader also .. that case is needed some hardware knowledge to open it the phone see this video to unbrick the hard stages : https://www.youtube.com/watch?v=ED96PJ-qYMM - See this video
IMPORTANT STEP :
After flashing ur mobile may not be turn on . that time put ur charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes it will on .
Sorry for my bad English
This all stuff i experienced much . So i shared with u all .
Thanks. More guide is coming soon :good:
This subforum is only for development threads..
hi i have a problem i installed custom kernel and after that my phone cannot see a sim card and saying invalid phone id etc.
what can i do now?
i tried to flash official firmware and nothing
After installing twrp is necessary to do any kind of wipes? does this method have any issues with encryption? Thanks
kurpiq said:
hi i have a problem i installed custom kernel and after that my phone cannot see a sim card and saying invalid phone id etc.
what can i do now?
i tried to flash official firmware and nothing
Click to expand...
Click to collapse
Which rom you are using??? flash the correct firmware.. if it is 7.1.2 nougat rom . flash 7.7.6 dev firmware
TheIceDragon said:
After installing twrp is necessary to do any kind of wipes? does this method have any issues with encryption? Thanks
Click to expand...
Click to collapse
No issues with your encryption
i have successfully flashed it, but the phone still cannot turn on, tried to put on charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes still cannot.... how? please help...
mi5
tyikki said:
i have successfully flashed it, but the phone still cannot turn on, tried to put on charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes still cannot.... how? please help...
Click to expand...
Click to collapse
i have this problem too for about too week, the only way you can turn on phone by flashing android 6 roms, such as ""gemini_global_images_V8.1.4.0.MAAMIDI_20161201.0000.00_6.0_global_e30a02e467.tgz"" the phone has problem with nougat.
my bootloader is unlocked but i cant change or update recovery
before two weeks ago i had miui 8.2.2 (nougat) on my phone with twrp but after restart take too long too turn on i flash it again and it is never run again on nougat ((((
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
arunon2013 said:
Guide to root Mi5
First of all you should unlock the bootloader first then only we can root our MI5
If You want to Unlock the bootloader MI5 follow this link :
http://en.miui.com/thread-267361-1-1.html
You can request the unlock code with any rom - Example global or Stable rom it doesnt matter (U should enable the developer options and enable the OEM unlocking and Usb debugging on
You have to create MIUI account and request the code - You have to wait for 3 days for receive the unlock code
after received the code. u can try with MI unlock code with this app . it will say binding time is too less u have to wait some time. It will say like that . (U dont want to wait try older version of Unlocking app ) it may allow u to unlock instantly ..
Follow this guide for unlocking app : http://en.miui.com/thread-536201-1-1.html
After unlocking the bootloader u have to flash twrp recovery
check this link for recovery : https://dl.twrp.me/gemini/ ( always use latest one)
download it and flash through fastboot mode.
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode.
Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
(Simple - You have TWRP recovery now)
ROOT GUIDE :
After installing TWRP recovery download super su zip file from chainfire
Download it from here : https://download.chainfire.eu/696/supersu/
flash it through TWRP ( Entering procedure for twrp by pressing power button + Volume up button)
Flashing through fastboot :
Step 1 : Connect ur phone to fastboot mode
Step 2 : Download it from this thread MI Flash tool http://xiaomiadvices.com/download-xiaomi-mi-flash-tool/
Step 3 : Download the fastboot rom this thread : http://xiaomiadvices.com/download-miui-8-global-stable-rom-fastboot-recovery-rom/
Step 4 : Flash it through fastboot mode - ( Note fastboot firmware is not in flashable extension - u have to change it the correct extension and it will work only place in C drive only (I mean which drive the os is installed ) - I attach the screenshot guide to change the extension later on - or else Google it
Step 5 : Flash it through the MI FLASH app and select flash all -
thats it
UNBRICK GUIDE: (also Relocking bootloader)
unfortunately ur device is bricked means u cant turn on ur device . any button will not work in ur phone so.. first u connect ur phone in data cable .. u might be see the QC bootloader driver will install in ur computer . After that u cant flash anything in MI flash tool . coz MI flashtool will not recognize ur device .
So .
Step 1 : Download MI5 CHINA PC suite to ur computer and install it ( English version will not work ) china version only updated
Step 2 : http://zhushou.xiaomi.com/ this link china pc suite is available
step 3 : Download firmware for our device http://en.miui.com/download-299.html download it from here (Global or Developer version thats not an issue)
Step 4 : Connect ur phone and open the pc suite . it has the option to select the update file in first menu ( I too dont know wat is written in that pc suite ) coz all is in chinese version ) check all the options u will find the option like select the update file that time u should press shift then only u can able to access the select option after that select the downloaded firmware ) simple u can see green option after selecting firmware. ( If u have doubt u can ask me in pm any time)
Step 5 : Flashing time it will take upto 30 minutes .
step 6 : After flashing it will automatically relock the bootloader .
Thats it . u have successfully unbricked the phone
(In some cases PC also not recognize the QC bootloader also .. that case is needed some hardware knowledge to open it the phone see this video to unbrick the hard stages : https://www.youtube.com/watch?v=ED96PJ-qYMM - See this video
IMPORTANT STEP :
After flashing ur mobile may not be turn on . that time put ur charger and PRESS HOME BUTTON + VOLUME UP AND DOWN+ POWER BUTTON together for 5 minutes it will on .
Sorry for my bad English
This all stuff i experienced much . So i shared with u all .
Thanks. More guide is coming soon :good:
Click to expand...
Click to collapse
i have problem too for about too week, the only way you can turn on phone by flashing android 6 roms, such as ""gemini_global_images_V8.1.4.0.MAAMIDI_20161201.0000.00_6.0_global_e30a02e467.tgz"", the phone has problem with nougat.
my bootloader is unlocked but i cant change or update recovery
before two weeks ago i had miui 8.2.2 (nougat) on my phone with twrp but after restart take too long (about 2hoursto turn on i flash it again and it is never run again on nougat ((((
tried to flash it with the newest MiFlash201612220 and V8.5.2.0, all successful, but it still cannot turn on.... anyone can help???
Hi after installing twrp via fastboot I am not able to enter twrp in any way, help?
hard brick Mi5
Hi! My phone brick during charge when i was asleep... he gets stuck in Mi logo and I 've tryed everything... no luck
After several types of attempts ...
in ADB window I was looking for the device with the wrong command -> is fastboot device and not adb device ... my device apears on hexadecimal
in mi flash comes the same id of the fastboot ADB (hexadecimal) and not the expectable COM "1"
I tried to flash fastboot rom without success, it says that I have the device locked ...
I have already filled in the form to unlock the bootloader already five months ago and I never received the code
- via fastboot ADB (recognizes the terminal but its designation is hexadecimal and not COM as intended) i already install all drivers , include qualcomm, but it never apears no manager device...
- via EDL (popup mode) is not possible because it is locked
- Mi unluck - blocks us 99% and says that "corrent acount is not bound to this device"
- Mi flash - recognize the device (hexadecimal), try to flash the rom via fastboot and says that the device is locked
I am desperate and without options ...
i think some hardware may be burn...
Hello there
I think I have bricked my phone quite bad. I tried the things you said but still the phone does not switch on. The interesting thing is that the green indicating light switches on and also when I press the power button the phone vibrates. I dont know what else should I do. Can you also tell me if I really have to press power + volume up and down + home button for 5 mins?
Thanks for the reply in advance.