Related
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Try to hard reset. Hold down the power button for at least 30 seconds. On devices that support it, the screen will turn off and the device should begin to cold reboot. A cold boot is where a device starts up from a power-off state. If that doesn't work you might have to test just how "nonremovable" their battery is and disassemble your device. If there aren't wires coming from the battery that are soldered to the phone's circuit board then it should be removable.
Hello to everyone,
I have the same GO phone. Do not try to open it (with purpose to take off the battery). To connect that phone in preloader mode just press volume up and then connect it in your pc. If you have the correct usb drivers, SP flash will find your phone.
I have done it and it worked for me. I have rooted my GO N1-y and I have used SP flash to unbrick my phone (I faced a problem with SP flash v.5.1352.01 and as a result I bricked my phone) using the official ROM. I did it with SP flash v.3.1320.0.174.
So, please give any feedback in case you find a custom rom for N1-Y.
Be good!!
thanasisvas said:
Hello to everyone,
I have the same GO phone. Do not try to open it (with purpose to take off the battery). To connect that phone in preloader mode just press volume up and then connect it in your pc. If you have the correct usb drivers, SP flash will find your phone.
I have done it and it worked for me. I have rooted my GO N1-y and I have used SP flash to unbrick my phone (I faced a problem with SP flash v.5.1352.01 and as a result I bricked my phone) using the official ROM. I did it with SP flash v.3.1320.0.174.
So, please give any feedback in case you find a custom rom for N1-Y.
Be good!!
Click to expand...
Click to collapse
I'm on my phone but I have another thread where I've discussed my many rom uses on the N1-Y
I've just found what I think is the best rom.
It's actually made for the Xolo Q1000s (the q1000s plus is pretty much a rebranded go n1y)
http://www.xolo.in/xolocare/software-update?page=3
If your try to Flash it via cwm it'll give an error.
I used 7 zip to view the archive and I edited it so that it never checked build.prop.
Flashed fine and is working great.
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Im not sure about your device, but i believe if your battery is not removeable, there will be a way to turn off your phone.
try pressing volume up and power until it vibrates 3 times, if its sony then this will work, try other button combination too
Try this : press volume up + volume down + Power
it work
MrMaddTraxx said:
Try this : press volume up + volume down + Power
Click to expand...
Click to collapse
I have mtk a device with a non-removable battery and I tried SEVERAL thing nothing works the dvice wase break dead then i tray these
prese up volume + down volum + power buttons and hold down and
i clique download in spflash tool
HaniAnis said:
I have mtk a device with a non-removable battery and I tried SEVERAL thing nothing works the dvice wase break dead then i tray these
prese up volume + down volum + power buttons and hold down and
i clique download in spflash tool
Click to expand...
Click to collapse
Well if you read the previous reply you should've noticed it was that combination to turn the device off.
I don't know what kind of problem you have so I have no idea how I could help you unless you say so
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Listen
your phone is rebooting but not showing on the screen
so what you need to do is
just try various combination like
vol up and vol down
vol up and power
vol down and power
and try this combination and keep pressing the button
and connect device to pc
and you will get the error that device power up too early
and the reason for the error is
reboot of device but no display on screen
so just try and try until your pc detect device and flashing starts
and believe me this the correct method
because i have repaired my phone with same method and i am sure because it worked for me three times
so keep trying the combination and at a moment your flashing tool
will start the flashing?
:fingers-crossed::fingers-crossed:
Give a LIKE :good::good:
martistmusic said:
Hi, I ave a MTK 6589 device (Green Orange N1-Y) and I would like to flash custom rom I've downloaded from Needrom with SP Flash Tools.
The problem is that this phone is with built-in battery. How to flash the rom? SP Flash Tool give me error " brom error s brom cmd startcmd fail 2005 "
I search all day for a solution, but nothing. Is there any chance?
Thanks
Martin
Click to expand...
Click to collapse
Hope my solution will help
i have an old phone hesens HE-F4 i insert sim card (GSM) and it displays no UIM card currently all the relevant apps of messaging internet and calls cannot be accessed how do i make it work
Hei everyone! I bricked my G2 MINI while tryin to unlock bootloader. I finally found a guide to unbrick it and via fastboot i have erased the LAF.IMG .
Now, when i try to get in download mode (battery at 0%, hold vol + button and connect usb cable) the phone shows for a second the "fastboot" screen that says to continue holding vol + for etnering download mode than ----> black screen and LG logo appears, black screen again and the phone reboot again and again...
Someone know how to get in fastboot without go in download mode?
I have only to get in fastboot then i'll push the boot,laf files to flash the complete firmware...PLEASE HELP!
mattia.frenk said:
Hei everyone! I bricked my G2 MINI while tryin to unlock bootloader. I finally found a guide to unbrick it and via fastboot i have erased the LAF.IMG .
Now, when i try to get in download mode (battery at 0%, hold vol + button and connect usb cable) the phone shows for a second the "fastboot" screen that says to continue holding vol + for etnering download mode than ----> black screen and LG logo appears, black screen again and the phone reboot again and again...
Someone know how to get in fastboot without go in download mode?
I have only to get in fastboot then i'll push the boot,laf files to flash the complete firmware...PLEASE HELP!
Click to expand...
Click to collapse
did you try pull out the battery
connect phone to pc press vol - and put the battery back in
i bricked my device and so i got into download mode and connected to lg tools and installed 4.4 kitkat again here is link if you need download tools
http://www.mylgphones.com/lg-software-tools-download
If he really erased LAF from his phone he can not get into download mode any more, because LAF is the download mode.
If he was in the situation where he could erase LAF he could have easily rescued his phone by flashing stock images.
Now it will be hard to rescue but there is nothing to loose any more.
You can try to get into fastboot by:
hold vol + button and connect usb cable.
As soon as you see the fastboot screen release all buttons.
Try to connect your phone via fastboot.
Try to flash original aboot + original LAF
Maybe flash original boot + system
or
Go to Download mode and flash original KDZ in emergency mode (CSE).
Zaaap72 said:
If he really erased LAF from his phone he can not get into download mode any more, because LAF is the download mode.
If he was in the situation where he could erase LAF he could have easily rescued his phone by flashing stock images.
Now it will be hard to rescue but there is nothing to loose any more.
You can try to get into fastboot by:
hold vol + button and connect usb cable.
As soon as you see the fastboot screen release all buttons.
Try to connect your phone via fastboot.
Try to flash original aboot + original LAF
Maybe flash original boot + system
or
Go to Download mode and flash original KDZ in emergency mode (CSE).
Click to expand...
Click to collapse
Thank u zaaap! Unfortunately even when i release all buttons the telephone get into the download mode (that dont exist anymore) and reboot... Im a fool that forget to push the laf stock. Anyway i bought a new motherboard... I think that replacing will solve my problem..
If you connect the phone to USB with a PC, does the PC show anything in explorer or device manager?
If yes, there is still a chance to recover it.
I'm referring to THIS task.
I have not done it before but it could work and you have nothing to loose.
Make sure you get the correct KDZ for your phone from HERE.
Extract the original images with WindowsLGFirmwareExtract
You can find the partition list HERE
Zaaap72 said:
If you connect the phone to USB with a PC, does the PC show anything in explorer or device manager?
If yes, there is still a chance to recover it.
I'm referring to THIS task.
I have not done it before but it could work and you have nothing to loose.
Make sure you get the correct KDZ for your phone from HERE.
Extract the original images with WindowsLGFirmwareExtract
You can find the partition list HERE
Click to expand...
Click to collapse
Nope man, i only hear the usb plug in/plug out sound of Win7 but nothing in explorer or the lg app on the pc. Its obvious that i have the drivers stock and the others of Android SDK platforms (i used adb and fastboot very uasually when the telephone was funtional).
Anyway thank u all for the help, i had the telephone bricked for the unlocking of the bootloader and i thought that my phone was over, the argument is very difficult to afford on this site and on this device, i sent the telephone at the LG Custom Care and they only told me that the motherboard was over and replace it costs 130€ (im Italian) so i reclined their offer (i have also a Oneplus X) but after some deep research on XDA i made big steps forward and maybe if didnt make the stupid thing of forgot to flash the laf stock, maybe i could be able to rescue my phone. So a big big big Thank to the community of XDA and a infinite f**k to LG Custom Care that they would stole me 130€.
Ps. I bought an LG D620 with the display destroyed for 30€ and ill replace the Motherboard.
Pps. Sorry for my bad English.
mattia.frenk said:
Nope man, i only hear the usb plug in/plug out sound of Win7 but nothing in explorer or the lg app on the pc.
Click to expand...
Click to collapse
OK, sounds good. And what does the devicemanager show?
Is there something like QHSUSB_BULK or Qualcomm HS-USB Qloader ?
Please how to install LG d620 LGE Android MTP Device driver. I tried all I can, to no avail. Pls help.
Ntarikon said:
Please how to install LG d620 LGE Android MTP Device driver. I tried all I can, to no avail. Pls help.
Click to expand...
Click to collapse
Wrong thread.
But, if you have a stock ROM, use LG's drivers. If you have a custom ROM, use Google's drivers.
Hi - have been searching these forums for days now but cant find a solution.
I am OK at flashing etc but am stuck now. Phone is stuck at Sony logo and won't go any further.
Phone is an Xperia M4 (E2303) and the bootloader is locked - have tried unlocking it but get 'Failed - command not allowed' so i'm guessing it is not unlockable!
I can't get into recovery (nothing happens when i try) and cant get into FlashMode either. I plug usb into phone while holding the volume down key. I CAN get into Fastboot mode which seems to work fine and is recognized ok by PC - drivers all installed ok.
Is there a way of flashing an FTF using Fastboot rather than Flashmode? or even installing any recovery. I have 32 and 64-bit Flashtool installed, i have FTF files and i have EMMA.
Can anyone help please? I would be very grateful - many thanks - ian
With bootloader locker you won't be able to flash anything. I had the same problem.
Desperately, my friend thought it was a good idea to put the phone on the refrigerator for a while.
Surprisingly, in the next day, I turned it on and the cold phone booted normaly and then I was able to set OEM unlock authorization on developer settings and unlocked the bootloader with sony unlock key.
Then I tried to flash a twrp, but I'm stuck back on boot loop again, and fridge didn't help this time.
Power OFF phone, then hold together for at least 30 sec in this order "volume down" + "volume up" + "power button". Then release 3 buttons and try to power on phone with power button. This procedure will revert your phone back to default settings.
I have the Same Issue Is your problem Solved?
nitinvaid said:
I have the Same Issue Is your problem Solved?
Click to expand...
Click to collapse
Read this tread. It worked for me! Good luck!
Hi there,
Same problem as OP here.
I am trying to revive my wife ex-phone, model 2303 which has been forgotten for two years at least.
Stock rom
No root
Bootloader locked
Stuck at Sony Logo when starting up the phone.
Can boot in FastBoot (blue light) and is detected by PC
Can boot in FlashMode (green light) but PC doesn't detect anything. Nothing appears in Peripherals.
Any advices ?
What can be done in FastBoot mode with a locked bootloader ?
LoLoBear said:
Hi there,
Same problem as OP here.
I am trying to revive my wife ex-phone, model 2303 which has been forgotten for two years at least.
Stock rom
No root
Bootloader locked
Stuck at Sony Logo when starting up the phone.
Can boot in FastBoot (blue light) and is detected by PC
Can boot in FlashMode (green light) but PC doesn't detect anything. Nothing appears in Peripherals.
Any advices ?
What can be done in FastBoot mode with a locked bootloader ?
Click to expand...
Click to collapse
Try using official flash tool Emma from Sony.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/download-flash-tool/
linccracker said:
Try using official flash tool Emma from Sony.
https://developer.sony.com/develop/open-devices/get-started/flash-tool/download-flash-tool/
Click to expand...
Click to collapse
Also Xperia companion will install all needed drivers and could also recover device.
https://www.sony.co.uk/electronics/support/articles/00236877
Thank your for your advices.
But in Flashmode the phone does not even appear in computer peripherals manager.
In FastBoot, Sony Emma does not detect phone neither.
LoLoBear said:
Thank your for your advices.
But in Flashmode the phone does not even appear in computer peripherals manager.
In FastBoot, Sony Emma does not detect phone neither.
Click to expand...
Click to collapse
Have you tried using an older version of flashtool ?
Hi, sorry for the late reply.
Which version of flashtool would you recommend ?
Would it change anything as the phone is not detected in device manager anyway ?
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.
Yesterday I did UNLOCK BOOTLOADER and then ROOT everything was fine I wanted to install V4A but after installation the device was in BOOTLOOP so I did it FULL WIPE and everything worked so I said I will return it to LOCK BOOTLOADER and since the device works it is stuck on the current image have been destroyed and can not boot realme can not enter bootloader and recovery
Today a good guy came into my computer and did MSMTOOL with me twice but without success I do not know what to do The device was bought exactly a week ago Thanks for the help
PS MSMTOOL requires username and password so that's why the guy helped me if something has a username and password I would love to try again
MY DEVICE - rmx2086
Amitayy said:
up plis help my phone briked!!
Click to expand...
Click to collapse
EDL mode is available but I have no clue if Flashone - "Qualcomm - flash dead phone" will work. Besides Flashone looks for zip file not ozip. You may need to convert ozip to zip and please check here for that - https://forum.xda-developers.com/realme-2-pro/how-to/convert-ozip-to-zip-installing-stock-t4065277.
I have X3, not Super Zoom but I could get the phone to edl mode and could see the COM port on Windows too. Power off the unit. Connect your USB cable to PC - this is important. wait for the screen to go blank. Press Vol Down + Power button together to get to recovery mode - takes few seconds. Select language and then press ver 1.2 (as shown on X3) about 3 times to get to edl mode. If you do not connect the cable as mentioned tapping ver x.x does not do anything.
Hope that helps and good luck.
PS: I know that you've mentioned that no recovery. Hopefully assume the screen remains blank and tap on bottom middle to see if Windows recognises any COM port under device manager.
up plis help my phone briked!!
bro did you get the solution . because i need it. my phone is bricked . it shows current image has been destroyed.....that stuff. its bootloader is not unlocked . i dont know what to do . some please help
hi , i have a realme x3 , after downgrading my phone is bricked , its says current image has been destroyed ........... , please help me someone in this lockdown without phone i will be in great trouble please help me . i am not able to boot to fastboot menu . its detected by the computer when both volume and power button is pressed
Bro msm tool works or not
Help me bro