Related
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (master✱)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Kicroy said:
Hello my friend just made an update of his phone which is a redmi 3 pro
His little bro shutdowned the phone while update was in process. The result is that now the phone have a bootloop, can't access the recovery (blackscreen when trying) and have a locked bootloader.
So I am not sur how to unlock the BL if I can't install a dev rom and can't boot. Not sur how to get into the recovery with the 2 same problems.
Could anyone help me for this one? Which is hard to me.
Thanks
PS: I tried to do something with unpacking boot and remove a ",verify" thing in the ramdisk but I guess I'll need the unlockedbootloader to flash the new boot.img?
Click to expand...
Click to collapse
I have the similar problem with my Redmi3. The Fastboot screen is the only screen that I can get now. Let me know if you have answer. Thanks.
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
EDL mode allows flashing with locked bootloader. Some models have this mode locked, but I think that is not the case with Redmi 3.
Kicroy said:
ohoh seems interesting then it won't say couldn't verify or smthg? will tell that to my friend asap, thanks
Click to expand...
Click to collapse
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
jokerpappu said:
to go to edl mode just turn off your phone.plug the cable to your laptop or desktop but not to your phone.now be ready to press both volume up and down button as you plug the usb cable to ur phone.immediately after inserting the usb cable press both volume buttons at the same time.it should vibrate and go to edl mode.edl mode appears in black screen so to know if its in edl mode or not open miflash and click refresh ,your device should be shown as com10,20 or com something like that .once you go to edl mode you know what to do if you have used miflash to flash roms.hope this helps you.
Click to expand...
Click to collapse
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
geuthym said:
I have a problem with my redmi 3. It makes reboot and it does not charge if its not closed.
Can you help me to fix or do you now where i can find a solution.....
Click to expand...
Click to collapse
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
jokerpappu said:
Well about that i dont know.but your best bet to solve it is by changing the software.if that does not helps then you should take your device to a technician for repairing.
Click to expand...
Click to collapse
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
geuthym said:
When i bouht it the software it was unnoficial then i put with miflash the china dev. All the problem start when i make updates apps and the android web view.
Click to expand...
Click to collapse
try flashing official global rom then see if the problem still persists or not
Hey! I am back with some news of my friend!
He tried to run the EDL mode but when he does that the phone simply goes into the bootloop again... He asked a vendor from Aliexpress to get a french rom, is there a way that the phone doesn't have EDL because of the rom or something like that? I mean is EDL a hardware-thing or a software-thing
same problem
cukru said:
If you can acces fastboot then just connect the phone to computer in fastboot and enter fastboot oem edl in cmd (maybe you will need Minimal ADB and fastboot to do it). Then flash official ROM via MiFlash.
Click to expand...
Click to collapse
I have same problem, but this way is not work, because bootloader is locked. Im forget for replacing recovery.img in update package with twrp.
I had this problem before few monthes
my solution was to "force" putting this device on EDL mode
I clicked on vol up + vol down + power together and got into EDL mode, then miflash it.
google - xiaomi understanding download mode
it will send you into miui forum
then second method, download mode, it is what I've described
I bricked my RN3Pro on AOSP Extended Rom so i started to flash Xiaomi official rom by MiFlash. That took me 2000seconds on MiFlash so i disconnected phone (to try it again). It crashed from fastboot mode to EDL (red led is blinking). And now.. My phone is undetectable on my PC and two notebooks. I have xiaomi drivers / google drivers, tried to add new android drivers. Nothing helps.
Trying to detect phone by MiFlash, adb, fastboot programs (some versions.. "minimal" too). Its still undetectable. Devices list is always empty. I don't think this is because of the drivers, this was ok before installing this bad xiaomi rom.
I need my phone tomorrow so please help me!
Just press power + volume Down
Then unlock bootloader and then reboot phone
I have the same issue, stuck on EDL (red led blinking) unable to be detected on anything, cannot use buttons to get into Fastboot or recovery.
Please help!!
Use test point method...... U will find the trick on YouTube...
[email protected] said:
Just press power + volume Down
Then unlock bootloader and then reboot phone
Click to expand...
Click to collapse
Unlocking bootloader solved it.. I spent 6 hours. Phone started normally on old AOSP ROM. Thank you very much
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.
Success is disgusted by some people, and will not share any files for free in the future.
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
johnny886 said:
In China, this Phone is called Nubia Play, and the Global version is called Redmagic 5G Lite,
but the mobile phone model is NX651J. Generally speaking, the two are only the difference in ROM.
This is the edl firmware of Nubia Play,CN version.which can repair your phone in edl mode.
All the files are from the official package without any modification!
How to do?
1.Open XiaoMiFlash.exe in the MiFlash folder
2.Click the select button to select the images in this firmware
3.The phone enters edl mode and connects to the computer with a usb cable
（If your phone is in edl mode (9008 mode) for a long time, you must long press the
power button volume + and volume-keys to force the phone to power off, and then re-enter edl mode）
4.Click Loading and see the COMxx that appears, indicating that your phone is connected. Then click Flash
5.Then just wait, prompting flash done！sucess! It means that the flashing has been completed,
long press the power button to restart the phone!
When you see the green notification light next to the front camera light up,
you can release the power button.
Good luck！Enjoy it！！！
Download link：
https://mega.nz/file/eNkVSA6T#2yN_JHtOxB_K4NHVTF3qT_asMMFtnEKBQ6sQ8b-y2nU
Click to expand...
Click to collapse
Only spanish?
GSM KING MAKER said:
Your Post Very Helpful For Us ,
I Am Test This File Then Post Result , Thanks For This File Provide !!!
Click to expand...
Click to collapse
Is global rom? Only spanish?
thequellu said:
Is global rom? Only spanish?
Click to expand...
Click to collapse
Its Not Global Rom , Only Chinese Firmware !
Why do I use scarlet letter when I use flash
The brick tool has worked on a few occasions ,thank you for that but now I need more help or suggestions, when playing between the Spain ROM and China version I lost the baseband and IMEI.Then I thought,locking the bootloader back would help obviously it did not work. Now even though I flashed the unbrick tool though miflasher edl mode I am stuck with a blank screen after the Nubia logo and port Qualcomm 900e in Windows device manager.
Tried already via recovery to flash an update China version or Spain version they flashed fine however still same scenario after Nubia logo.
Not sure what my options are.
Does this work for updating or just brick?
DargorDG said:
Does this work for updating or just brick?
Click to expand...
Click to collapse
It does work to fix the update errors and then use the OTA or USB Otg method
@johnny886
Thank you for the tool.Just wondering if there is a version for Android 11 as i updated to 3.16 android 11 firmware via the usb and now I get your device is corrupt.
Obviously my problem dates back to unlocking and then relocking the bootloader which somehow bricked the phone. Even though before relocking the tool worked once the bootloader was locked the phone wasn't able to boot into system but I was not getting the device is corrupt.
I am hoping for a way to unlock the bootloader or to be able to get back into the system to tick the option in the developer settings hence I am keeping my hope for an updated unbrick tool.
I donwload the file and uncompress it, when select the folder with XiaoMiFlash is shows "could't find flash script".
There are no flash_all.bat file on folder
any help, where is that file?
(mega interrupt the download process)
@ecatombe1234
In my case said the same with regards the script but had flashed fine once started.
Just be careful if you have the bootloader unlocked do not lock it again with the fastboot flash lock.
Thanks for you, really soon, response.
Yes, I try, put phone in edl mode, refresh, flash, and recive [... COM8]:ERROR_UNSUPPORTED_TYPE 0
@ecatombe1234
Usually this is down to the drivers used for Qualcomm Edl mode. Have you installed them ?
Is the EDL mode phone recognized in the device manager as Qualcomm??
Yes, I have correct drivers, I restored the phone last year, but not now.
Xiaomi tool detects phone in bootloader and in edl mode.
Windows detect phone in edl mode as: Qualcomm HS-USB QDLoader 9008 (COM8).
I tried with QFiL too, but I am not sure the config to work qith this, because it detect mobile in edl mode.
Any way, Xiaomi tool has very few config options, I can's understand the "could't find flash script", can any one give us ligth about this error?
It was xiaomi flash tool version, I tried a lot, finally this one works, it is the only one that works with corrupted android 11 version.
Download Xiaomi Flash Tool- v20210226
Mi Flash tool is meant for all Qualcomm powered Xiaomi and Redmi phones on which you can flash MIUI Fastboot ROMs. It works over the Fastboot connection to erase and…
droidfilehost.com
That will work to my dead boot nubia paly 5g?
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Helo guys.. How can I downgrade from android 11 back to android 10 on this device? I recently updated my software but It is not stable yet. Certain apps for example PUBG mobile keep crashing whenever I try to launch it.
Mitchpop said:
@ecatombe1234
Thank you for the version even though this version got me a bit further in a Chinese testing menu still couldn't boot into system .
Must be something to do with the relocking of the bootloader.
Click to expand...
Click to collapse
I've been following your discussion on this thread and had the same problem after ota update to 3.16.
I also had initially difficulty flashing with MiFlash but finally it worked.
I immediately pressed the flash after entering EDL mode
My phone flashed and entered the Chinese mode. I then went to bootloader by hard pressing the power button and Vol down key.
In bootloader I entered recovery which allowed me to update using OTG. I used a flash with USB C and loaded the phone with NX651J v 22 and my phone is back to the previous settings.